| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus) Fix passing events to regulator core
Sashiko reports:
Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with
mutex") introduced a worker to batch regulator events over time using
atomic_or(). The delayed worker then passes the combined bitmask unmodified
to regulator_notifier_call_chain().
The core regulator subsystem's regulator_handle_critical() function
evaluates the event parameter using a strict switch statement. If
multiple distinct faults occur before the worker runs (e.g.,
REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined
bitmask fails to match any case. This leaves the reason as NULL and
completely bypasses the critical hw_protection_trigger().
Fix the problem by passing events bit by bit to the regulator event
handler. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid()
pmbus_data2reg_vid() hardcoded the VR11 encoding regardless of the
vrm_version configured by the driver, while pmbus_reg2data_vid()
already switched on it. Any driver that selects a non-VR11 VID mode
and exposes a regulator (or hwmon vout setter) sent dangerously
wrong codes to PMBUS_VOUT_COMMAND -- e.g. an nvidia195mv part asked
for 200 mV got the VR11 clamp to 500 mV encoded as 0xB2, which the
chip interprets as 1080 mV.
Mirror pmbus_reg2data_vid() so writes round-trip with reads. |
| FFmpeg before commit b4c199c contains an incorrect integer narrowing conversion in the AV1 RTP packetizer (libavformat/rtpenc_av1.c). The OBU size is cast to long before comparison against the remaining frame size. On targets where long is 32 bits, including 64-bit Windows, sufficiently large OBU size values are sign-flipped by the narrowing cast, producing a negative value that passes the payload size check. This allows an oversized OBU to bypass the safety bound on affected platforms, leading to out-of-bounds memory access when the oversized value is subsequently used as a copy length. |
| Date::Manip versions through 6.99 for Perl return corrupted dates via non-ASCII decimal digits that pass the numeric range tests in check.
The parse regexes capture year, month and day with the `\d` shorthand, which on a character string matches the whole Unicode decimal digit property `\p{Nd}` and not just `[0-9]`. Date::Manip::Base::check then validates the captured fields with numeric comparisons alone (`$y<1 || $y>9999`, `$m<1 || $m>12`, `$d<1 || $d>$days`), and _parse_check stores the numified fields (`$y+0`). Perl truncates a string at the first character that is not an ASCII digit, so a field whose leading characters are ASCII digits numifies to an in-range prefix and satisfies every test: a year field of three ASCII digits followed by U+0664 ARABIC-INDIC DIGIT FOUR numifies to 202, giving the year 0202, and one non-ASCII digit in the month or day field shifts those fields the same way. The hour, minute and second fields match explicit ASCII character classes (`0?[0-9]`, `[0-5][0-9]`) and do not shift, though a non-ASCII digit in a fractional hour or minute field truncates the fraction.
Any caller that passes an untrusted character string to ParseDate() or Date::Manip::Date->parse() can get back a date that differs from the string it parsed, with no parse error. Where the parsed date gates logic such as an expiry check or a retention window, the shift goes unnoticed. |
| In the Linux kernel, the following vulnerability has been resolved:
MIPS: DEC: Ensure 32-bit stack location for o32 prom_printf()
In 64-bit configurations calling any firmware entry points from a kernel
thread other than the initial one will result in a situation where the
stack has been placed in the XKPHYS 64-bit memory segment.
Consequently the stack pointer is no longer a 32-bit value and when the
32-bit firmware code called uses 32-bit ALU operations to manipulate the
stack pointer, the calculated result is incorrect (in fact in the 64-bit
MIPS ISA almost all 32-bit ALU operations will produce an unpredictable
result when executed on 64-bit data) and control goes astray.
This may happen when no final console driver has been enabled in the
configuration and consequently the initial console continues being used
late into bootstrap, or with an upcoming change that will switch the zs
driver to use a platform device, which in turn will make the console
handover happen only after other kernel threads have already been
started, and the kernel will hang at:
pid_max: default: 32768 minimum: 301
or somewhat later, but always before:
cblist_init_generic: Setting adjustable number of callback queues.
has been printed.
It seems that only the prom_printf() entry point is affected. Of all
the other entry points wired only rex_slot_address() and rex_gettcinfo()
are called from a kernel thread other than the initial one, specifically
kernel_init(), and they are leaf functions that do no business with the
stack, having worked with no issue ever since 64-bit support was added
for the platform back in 2002.
To address this issue then, arrange for the stack to be switched in the
o32 wrapper as required for prom_printf() only, by supplying call_o32()
with a pointer to a chunk of initdata space, which is placed in the
CKSEG0 32-bit compatibility segment, observing that prom_printf() is
only called from console output handler and therefore with the console
lock held, implying no need for this code to be reentrant.
Other firmware entry points may be called with interrupts enabled and no
lock held, and may therefore require that call_o32() be reentrant. They
trigger no issue at this point and "if it ain't broke, don't fix it," so
just leave them alone. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix incorrect inheritable capability in CAPSET records
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, lsm: Add check for BPF LSM return value
A bpf prog returning a positive number attached to file_alloc_security
hook makes kernel panic.
This happens because file system can not filter out the positive number
returned by the LSM prog using IS_ERR, and misinterprets this positive
number as a file pointer.
Given that hook file_alloc_security never returned positive number
before the introduction of BPF LSM, and other BPF LSM hooks may
encounter similar issues, this patch adds LSM return value check
in verifier, to ensure no unexpected value is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/bpf: Zero-extend bpf prog return values and kfunc arguments
s390x ABI requires callers to zero-extend unsigned arguments and
sign-extend signed arguments, and callees to zero-extend unsigned
return values and sign-extend signed return values.
s390 BPF JIT currently implements only sign extension. Fix this
omission and implement zero extension too. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Avoid truncating memory addresses
On 32-bit machines with CONFIG_ARM_LPAE, it is possible for lowmem
allocations to be backed by addresses physical memory above the 32-bit
address limit, as found while experimenting with larger VMSPLIT
configurations.
This caused the qemu virt model to crash in the GICv3 driver, which
allocates the 'itt' object using GFP_KERNEL. Since all memory below
the 4GB physical address limit is in ZONE_DMA in this configuration,
kmalloc() defaults to higher addresses for ZONE_NORMAL, and the
ITS driver stores the physical address in a 32-bit 'unsigned long'
variable.
Change the itt_addr variable to the correct phys_addr_t type instead,
along with all other variables in this driver that hold a physical
address.
The gicv5 driver correctly uses u64 variables, while all other irqchip
drivers don't call virt_to_phys or similar interfaces. It's expected that
other device drivers have similar issues, but fixing this one is
sufficient for booting a virtio based guest. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_sip: fix Content-Length u32 truncation in sip_help_tcp()
sip_help_tcp() parses the SIP Content-Length header with
simple_strtoul(), which returns unsigned long, but stores the result in
unsigned int clen. On 64-bit systems, values exceeding UINT_MAX are
silently truncated before computing the SIP message boundary.
For example, Content-Length 4294967328 (2^32 + 32) is truncated to 32,
causing the parser to miscalculate where the current message ends. The
loop then treats trailing data in the TCP segment as a second SIP
message and processes it through the SDP parser.
Fix this by changing clen to unsigned long to match the return type of
simple_strtoul(), and reject Content-Length values that exceed the
remaining TCP payload length. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Use u32 for non-negative values in ceph_monmap_decode()
This patch fixes unnecessary implicit conversions that change signedness
of blob_len and num_mon in ceph_monmap_decode().
Currently blob_len and num_mon are (signed) int variables. They are used
to hold values that are always non-negative and get assigned in
ceph_decode_32_safe(), which is meant to assign u32 values. Both
variables are subsequently used as unsigned values, and the value of
num_mon is further assigned to monmap->num_mon, which is of type u32.
Therefore, both variables should be of type u32. This is especially
relevant for num_mon. If the value read from the incoming message is
very large, it is interpreted as a negative value, and the check for
num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to
allocate a very large chunk of memory for monmap, which will most likely
fail. In this case, an unnecessary attempt to allocate memory is
performed, and -ENOMEM is returned instead of -EINVAL. |
| CoreDNS is a DNS server that chains plugins. Starting in version 1.2.0 and prior to version 1.12.4, the CoreDNS etcd plugin contains a TTL confusion vulnerability where lease IDs are incorrectly used as TTL values, enabling DNS cache pinning attacks. This effectively creates a DoS condition for DNS resolution of affected services. The `TTL()` function in `plugin/etcd/etcd.go` incorrectly casts etcd lease IDs (64-bit integers) to uint32 and uses them as TTL values. Large lease IDs become very large TTLs when cast to uint32. This enables cache pinning attacks. Version 1.12.4 contains a fix for the issue. |
| An exploitable signed comparison vulnerability exists in the ARMv7 memcpy() implementation of GNU glibc 2.30.9000. Calling memcpy() (on ARMv7 targets that utilize the GNU glibc implementation) with a negative value for the 'num' parameter results in a signed comparison vulnerability. If an attacker underflows the 'num' parameter to memcpy(), this vulnerability could lead to undefined behavior such as writing to out-of-bounds memory and potentially remote code execution. Furthermore, this memcpy() implementation allows for program execution to continue in scenarios where a segmentation fault or crash should have occurred. The dangers occur in that subsequent execution and iterations of this code will be executed with this corrupted data. |
| Incorrect conversion between numeric types in Windows Common Log File System Driver allows an authorized attacker to elevate privileges locally. |
| Incorrect conversion between numeric types in Microsoft Office Word allows an unauthorized attacker to execute code locally. |
| DHCP Server Service Remote Code Execution Vulnerability |
| A floating-point exception (FPE) in the flow.column_stack component of OneFlow v0.9.0 allows attackers to cause a Denial of Service (DoS) via a crafted input. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of ICC color management profiles. Versions prior to 2.3.1.2 have an undefined behavior issue when floating-point NaN values are converted to unsigned short integer types during ICC profile XML parsing potentially corrupting memory structures and enabling arbitrary code execution. This vulnerability affects users of the iccDEV library who process ICC color profiles. ICC Profile Injection vulnerabilities arise when user-controllable input is incorporated into ICC profile data or other structured binary blobs in an unsafe manner. Version 2.3.1.2 contains a fix for the issue. No known workarounds are available. |
| In Eclipse Paho Go MQTT v3.1 library (paho.mqtt.golang) versions <=1.5.0 UTF-8 encoded strings, passed into the library, may be incorrectly encoded if their length exceeds 65535 bytes. This may lead to unexpected content in packets sent to the server (for example, part of an MQTT topic may leak into the message body in a PUBLISH packet).
The issue arises because the length of the data passed in was converted from an int64/int32 (depending upon CPU) to an int16 without checks for overflows. The int16 length was then written, followed by the data (e.g. topic). This meant that when the data (e.g. topic) was over 65535 bytes then the amount of data written exceeds what the length field indicates. This could lead to a corrupt packet, or mean that the excess data leaks into another field (e.g. topic leaks into message body). |
| iccDEV provides a set of libraries and tools for working with ICC color management profiles. Versions 2.3.1 and below have overflows and underflows in CIccXmlArrayType::ParseTextCountNum(). This vulnerability affects users of the iccDEV library who process ICC color profiles. This issue is fixed in version 2.3.1.1. |
