| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Subscriber Server Side Request Forgery (SSRF) in FluentCRM Pro <= 3.1.12 versions. |
| Contributor Server Side Request Forgery (SSRF) in Shared Files <= 1.7.69 versions. |
| fast-uri is a URI parser for Node.js. It decodes percent escapes in a hostname during parsing and then decodes the parsed hostname a second time during authority recomposition, so a single call to normalize or resolve can turn nested percent-encoded input into a different network destination such as a loopback hostname or address. For example, a doubly encoded host that spells out a loopback name decodes to that live host in one operation, which contradicts RFC 3986 section 2.4 that an implementation must not decode the same string more than once. An application that normalizes or resolves an untrusted HTTP-family URI before outbound routing, redirect validation, or a host-policy check can receive a destination different from the one the original encoded host represented, giving a server-side request forgery and host-policy bypass primitive. This is an incomplete-fix variant of CVE-2026-6322. The affected versions are 2.4.1 up to but not including 2.4.5, 3.1.2 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which normalize percent escapes once and preserve encoded percent signs. Users should upgrade to a patched version. |
| fast-uri is a URI parser for Node.js. Its custom parser for bracketed IPv6 literals does not validate the complete IPv6 grammar, so invalid trailing text in an authority can be silently discarded and a malformed attacker-controlled host is turned into a different valid IPv6 destination. For example, a bracketed literal with invalid trailing characters is normalized to the unspecified address, which a Node HTTP client then connects to a local service over loopback, and other malformed literals collapse to private-range addresses. No error is set on the parsed result, so an application checking the error field cannot detect the rewrite. An application that normalizes untrusted URLs before outbound requests, redirects, proxy routing, or address-policy enforcement can be redirected to a local or private IPv6 target, giving a server-side request forgery and address-policy bypass primitive. The affected versions are 2.3.1 up to but not including 2.4.5, 3.0.0 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which validate bracketed IP literals against the full grammar and mark malformed literals as authority errors. Users should upgrade to a patched version. |
| Hugo's security.http.urls allowlist is the only control on outbound fetches made by resources.GetRemote, and it inspects the URL text alone. CheckAllowedHTTPURL in config/security/securityConfig.go applies the configured pattern list and then re-checks a canonicalised form of an integer, hex or octal IPv4 host, but it never resolves the hostname and never inspects the address the HTTP client actually connects to. The client constructed in resources/resource_factories/create/create.go installs no dial-time hook, so no check occurs at connection time either. A hostname that resolves to a loopback, private or cloud-metadata address therefore satisfies the policy, and the response body is embedded in the generated site. An attacker who can supply a URL through content, for example a front-matter field or a CMS field, can make the build fetch an internal endpoint and publish the response in the static output, so the build artifact itself carries the data out. |
| BentoML's outbound connection safeguard (make_safe_connect in _internal/utils/uri.py) blocks private, loopback, and link-local IP addresses but fails to reject the RFC 6598 shared address space (100.64.0.0/10, CGNAT). In versions 1.4.19 through 1.4.39, an unauthenticated attacker can supply URLs pointing to that range via multipart file handling (MultipartSerde.ensure_file) or JSON request parsing (JSONSerde.parse_request), causing the server to make outbound requests to internal hosts on CGNAT networks (Server-Side Request Forgery). This is an incomplete fix for CVE-2025-54381. |
| TensorZero is an open-source LLMOps platform that unifies an LLM gateway, observability, evaluation, optimization, and experimentation. Prior to 2026.6.0, the TensorZero Gateway /internal/object_storage endpoint accepts a caller-supplied JSON storage_path parameter that dynamically overrides the [object_storage] configuration. Selecting the filesystem storage type allows arbitrary files on the gateway filesystem to be read, including credential files. Selecting the s3_compatible storage type causes outbound object-storage requests to attacker-chosen internal or cloud-metadata endpoints. Exploitation requires access to the gateway, which can be authenticated or unauthenticated depending on deployment configuration. This issue is fixed in version 2026.6.0. |
| Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc's user-SQL validator (`internal/api/query.go:ValidateSQLRequest`) blocked only `read_parquet(` and `arc_partition_agg(` via regex denylist. The broader DuckDB I/O function family — `read_csv_auto`, `read_csv`, `read_json`, `read_json_auto`, `read_text`, `read_blob`, `glob`, `parquet_metadata`, `parquet_schema`, `read_xlsx`, etc. — was not blocked. RBAC table-reference extraction inspected only `FROM`/`JOIN` clauses, so scalar table functions in the `SELECT` list slipped past both layers. This is fixed in 2026.06.1 via a structural sandbox at the DuckDB layer. After lockdown, DuckDB refuses to open any file outside the allowlist and refuses further `INSTALL`/`LOAD`. Already-loaded extensions remain callable. Some workarounds are available. Restrict API access to known-trusted networks via firewall rules or, as a temporary mitigation, add `read_csv*`/`read_json*`/`glob` etc. to `dangerousSQLPattern` in `internal/api/query.go`. |
| Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's Raft FSM (`internal/cluster/raft/fsm.go:applyRegisterFile`) accepts attacker-chosen file paths in manifest-registration proposals without validating them against the configured storage backend. The only check is that the path is non-empty. There is no parent-traversal (`..`) rejection, no allowlist of legitimate prefixes, no scheme restriction (`s3://` vs local), and no length bound. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit the cluster manifest for unexpected paths (any path not matching the configured storage backend root is suspect), and/or disable cluster mode until the fix is available. |
| The Mailgun for WordPress plugin for WordPress is vulnerable to Server-Side Request Forgery (SSRF) via path traversal in versions up to and including 2.2.0. This is due to insufficient input validation in the add_list() function, which accepts user-controlled array keys from $_POST['addresses'], passes them through sanitize_text_field(). This makes it possible for unauthenticated attackers to make authenticated POST requests to any Mailgun API endpoint using the WordPress site's API key, including creating inbound email-forwarding routes that can intercept password reset emails, leading to administrator account takeover. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
[borntraeger@linux.ibm.com: Fixed whitespace] |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would. |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't leak the user namespace when the mount fails
bm_get_tree() takes a reference to the user namespace and hands it to
get_tree_keyed() as the sget key. sget_fc() moves that reference into
sb->s_fs_info and clears fc->s_fs_info, so from that point on the
superblock owns it and bm_free() doesn't see it anymore.
The superblock drops it in ->put_super(). But generic_shutdown_super()
only calls ->put_super() from inside the if (sb->s_root) branch, so
nothing releases it when bm_fill_super() fails:
- The kzalloc_obj() failure leaves s_root NULL and the whole branch is
skipped.
- A simple_fill_super() failure in the file loop leaves s_root set, but
s_op still points at simple_super_operations, which has no
->put_super(). bm_fill_super() installs s_ops only once
simple_fill_super() returned success, and installing it earlier
wouldn't help either because simple_fill_super() overwrites s_op.
Either way vfs_get_super() calls deactivate_locked_super() and the
reference is gone for good. binfmt_misc mounts are available in a user
namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so
an unprivileged caller under a tight memory cgroup can fail
simple_fill_super() on demand and leak one user namespace per attempt.
Drop the reference in ->kill_sb() instead, which runs unconditionally,
the same way nfsd and rpc_pipefs release their keyed s_fs_info.
That also stops ->put_super() from clearing s_fs_info while the
superblock is still on @fs_supers. generic_shutdown_super() leaves it
there on purpose so that sget_fc() keeps finding it until kill_sb() has
run, but a NULL s_fs_info makes test_keyed_super() miss it, so a
concurrent mount for the same user namespace skips the grab_super()
wait and creates a second superblock for a namespace that is still
being torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: fix refcount leak in mlxsw_sp_port_lag_join()
When mlxsw_sp_port_lag_index_get() fails, mlxsw_sp_port_lag_join()
returns an error without releasing the lag reference obtained by
the earlier mlxsw_sp_lag_get(). All other error paths in the
function jump to the cleanup label that ends with
mlxsw_sp_lag_put(), so this is a single missed release.
Fix the leak by replacing the bare 'return err' with a goto to the
existing error cleanup label, which will drop the reference safely. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8192: Check runtime resume during probe
The MT8192 AFE probe enables runtime PM temporarily while reinitializing
the regmap cache from hardware, but it uses pm_runtime_get_sync()
without checking the return value. If runtime resume fails, probe keeps
going without the device necessarily being accessible, and
pm_runtime_get_sync() may leave the PM usage count incremented.
The regmap_reinit_cache() failure path also returns before dropping the
temporary PM reference and before clearing pm_runtime_bypass_reg_ctl.
Use pm_runtime_resume_and_get() so resume failures do not leak a usage
count, and clear the temporary bypass flag after dropping the probe PM
reference on all regmap_reinit_cache() outcomes. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix refcount leak in i_ipmi_request()
When a caller provides a `supplied_recv` message to i_ipmi_request(),
the function increments the user's `nr_msgs` reference count. If an
error occurs later, the out_err cleanup path only frees the recv_msg
if the function allocated it itself (i.e., !supplied_recv). In the
supplied_recv case the cleanup is skipped, leaving the reference count
elevated. The caller ipmi_request_supply_msgs() does not release the
supplied_recv on error, so the reference is permanently leaked.
Fix this by explicitly reverting the reference count operations when a
supplied recv_msg with a valid user pointer is present in the error
path: decrement nr_msgs and drop the user's kref. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: omap2430: Do not put borrowed of_node in probe
omap2430_probe() stores pdev->dev.of_node in a local np variable. This is
a borrowed pointer and the probe function does not take a reference to
it.
The success and error paths nevertheless call of_node_put(np). This drops
a reference that is owned by the platform device, and can leave
pdev->dev.of_node with an unbalanced reference count.
Do not put the borrowed platform device node from omap2430_probe().
References taken for the child MUSB device are handled by the device core,
and the ctrl-module phandle reference is still released separately. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
The v4l2 helper v4l2_async_register_subdev_sensor() calls
v4l2_async_register_subdev(), which is a macro that expands to
__v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded
inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module
rather than the sensor driver module that originally set sd->owner. When
v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then
overwrites the sensor driver's owner with NULL.
This causes the problem that the sensor module's reference count is never
incremented during async registration, so the module can be removed while
the subdevice is still in use by a notifier (e.g., a CSI-2 receiver
bridge driver).
Fix this by renaming v4l2_async_register_subdev_sensor() to
__v4l2_async_register_subdev_sensor() with an added explicit module
argument and introducing a wrapper macro:
#define v4l2_async_register_subdev_sensor(sd) \
__v4l2_async_register_subdev_sensor(sd, THIS_MODULE)
This ensures the sensor driver module is properly referenced even when
the sensor driver does not init the owner field before calling
v4l2_async_register_subdev_sensor() and prevents premature module removal. |
| A vulnerability was determined in vas3k TaxHacker up to 0.8.2. Impacted is the function buildImapConfig of the file lib/email-sync/imap-client.ts of the component Email Sync. Executing a manipulation of the argument host/port can lead to server-side request forgery. It is possible to launch the attack remotely. The pull request to fix this issue awaits acceptance. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Pin the 'struct nfs_server' during a FREE_STATEID call
Dan Aloni reports that he was able to hit a use-after-free bug if a
FREE_STATEID operation gets delayed for whatever reason. Fix this by
bumping the refcount of the 'struct nfs_server' object for the duration
of the FREE_STATEID so it doesn't get cleaned up from underneath us
while operations are still in flight. |
