| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When HAVE_ENCRYPT_THEN_MAC is configured, the implementation could fall back to MAC-then-Encrypt rather than enforcing Encrypt-then-MAC. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: don't try to setup PHY-driven SFP cages when using genphy
We don't have support for PHY-driver SFP cages with the genphy code.
On top of that, it was found by sashiko that running
sfp_bus_add_upstream() for genphy deadlocks, as for genphy the PHY
probing runs under RTNL, which isn't the case for non-genphy drivers.
This problem was reproduced, and does lead to a deadlock on RTNL.
Before the blamed commit, the phy_sfp_probe() call was made by
individual PHY drivers, so there was no way to get to the SFP probing
path when using genphy.
Let's therefore only run phy_sfp_probe when not using genphy. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent uninitialized lcn caused by zero len
syzbot reported a uninit-value in ntfs_iomap_begin [1].
Since runs was not touched yet, run_lookup_entry() immediately fails
and returns false, which makes the value of "*len" 0.
Simultaneously, the new value and err value are also 0, causing the
logic in attr_data_get_block_locked() to jump directly to ok, ultimately
resulting in *lcn being triggered before it is set [1].
In ntfs_iomap_begin(), the check for a 0 value in clen is moved forward
to before updating lcn to avoid this [1].
[1]
BUG: KMSAN: uninit-value in ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825
ntfs_iomap_begin+0x8c0/0x1460 fs/ntfs3/inode.c:825
iomap_iter+0x9b7/0x1540 fs/iomap/iter.c:110
Local variable lcn created at:
ntfs_iomap_begin+0x15d/0x1460 fs/ntfs3/inode.c:786 |
| Insufficient Verification of Data Authenticity, Improper Handling of Exceptional Conditions vulnerability in rustdesk-client RustDesk Client rustdesk-client on Windows, MacOS, Linux, iOS, Android (Heartbeat sync loop, strategy processing modules) allows Protocol Manipulation.
This vulnerability is associated with program files src/hbbs_http/sync.Rs and program routines stop-service handler in heartbeat loop.
This issue affects RustDesk Client: through 1.4.8. |
| Vulnerability in the Oracle VM VirtualBox product of Oracle Virtualization (component: Core). The supported version that is affected is 7.2.8. Difficult to exploit vulnerability allows high privileged attacker with logon to the infrastructure where Oracle VM VirtualBox executes to compromise Oracle VM VirtualBox. While the vulnerability is in Oracle VM VirtualBox, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle VM VirtualBox. CVSS 3.1 Base Score 7.5 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:C/C:H/I:H/A:H). |
| Typesense is a fast, typo-tolerant search engine. Prior to versions 29.1 and 30.2, there is an unauthenticated denial-of-service vulnerability in the /multi_search endpoint. A specially crafted request can trigger an unhandled exception during request processing, causing the server process to terminate. This issue can be exploited over the network without authentication and results in service unavailability. The duration of impact may vary depending on system configuration and dataset size. This issue has been patched in versions 29.1 and 30.2. |
| When Routinator encounters a file via RRDP using a specifically crafted Document Type Definition, Routinator crashes. |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. network-libp2p handles kad get-record query progress in handle_dht_get (network-libp2p/src/swarm.rs). Prior to version 1.4.0, when a peer returns a FoundRecord, the code verifies the record via dht_verifier.verify(&record.record). On verifier error, handle_dht_get logs and returns early without completing the oneshot used by Network::dht_get, and without cleaning up per-query bookkeeping. Later query progress can hit the "DHT inconsistent state" path and also return without cleanup. Because Network::dht_get awaits the oneshot without a timeout, the caller future can hang indefinitely. This issue has been patched in version 1.4.0. |
| Improper handling of insufficient permissions or privileges in Microsoft Dynamics 365 (on-premises) allows an authorized attacker to elevate privileges over a network. |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.4.0, iIn handle_dht_get(), the DhtResults accumulator is only initialized when the first DHT record passes verification. If the first record fails (from a malicious DHT node), DhtResults is never created, and all subsequent valid records are discarded with "DHT inconsistent state" errors. This issue has been patched in version 1.4.0. |
| Routinator exits on any error when accepting incoming HTTP or RTR connections, including ones it can recover from such as running out of file descriptors. This condition can be triggered maliciously by an attacker by opening a large number of connections to the HTTP or RTR server.
This only affects users that make their HTTP or RTR server available to untrusted networks. |
| Mattermost Plugins versions <=11.4 10.11.11.0 fail to validate webhook request timestamps which allows an attacker to corrupt Zoom meeting state in Mattermost via replayed webhook requests. Mattermost Advisory ID: MMSA-2026-00584 |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| Mattermost Desktop App versions <=6.1 6.0.1 5.4.13.0 fail to prevent server-rendered content from closing an underlying application view in the Mattermost Desktop App which allows a malicious server or plugin to crash the desktop client via invoking {{window.close()}} in the renderer context, leading to a denial of service condition at the client level. Mattermost Advisory ID: MMSA-2026-00633 |
| Cpanel::JSON::XS versions before 4.41 for Perl allow denial of service via UTF-8 BOM prefixed input when a decode filter callback throws.
To skip a leading 3-byte UTF-8 BOM, decode_json() advances the input scalar's string pointer past the mark with SvPV_set() and restores it only on the normal return path. When decoding aborts through a Perl exception, for example a filter_json_object callback that croaks, the restore is skipped and the scalar is left with its string pointer offset into its own buffer and a shortened length.
When that scalar is later freed, the allocator receives an invalid pointer and the interpreter aborts. A single BOM prefixed document decoded with a throwing filter callback crashes any caller. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.9.5, deterministic AES-192-CBC with a fixed zero IV, constant KDF salt, and no MAC leads to confidentiality and integrity failures for synced bookmark/profile data. Attackers can crack common passwords across installs and perform undetected ciphertext bit-flips to alter config/bookmarks. This vulnerability is fixed in 3.9.5. |
| OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, the Postgres protocol parser assumes BIND message payloads contain a valid NUL-terminated portal name. A crafted empty or unterminated payload can make OBI slice beyond the end of the captured buffer and panic. This issue has been patched in version 0.9.0. |
| Casdoor versions 2.362.0 and earlier contain a vulnerability enabling cross-organization token exchange. The GetTokenExchangeToken function in object/token_oauth.go validates JWT signatures but does not verify that the token's user belongs to the same organization as the target application. This can result in privilege escalation across organizational boundaries. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Samsung Open Source Escargot allows Input Data Manipulation.
This issue affects Escargot: 590345cc6258317c5da850d846ce6baaf2afc2d3. |
| Improper check for unusual or exceptional conditions vulnerability in SSO in Synology DiskStation Manager (DSM) before 7.2.2-72806-5 and 7.3.1-86003-1 (7.2.1-69057 is not affected) allows remote attackers to bypass authentication with prior knowledge of the distinguished name (DN). |
