| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: fix SER panic with 4GB+ RAM
If the mtk_poll_rx() function detects the MTK_RESETTING flag, it will
jump to release_desc and refill the high word of the SDP on the 4GB RFB.
Subsequently, mtk_rx_clean will process an incorrect SDP, leading to a
panic.
Add patch from MediaTek's SDK to resolve this. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: adjust subpage bit start based on sectorsize
When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
Use spin_lock_irqsave and spin_unlock_irqrestore instead of spin_lock
and spin_unlock in mtk_star_emac driver to avoid spinlock recursion
occurrence that can happen when enabling the DMA interrupts again in
rx/tx poll.
```
BUG: spinlock recursion on CPU#0, swapper/0/0
lock: 0xffff00000db9cf20, .magic: dead4ead, .owner: swapper/0/0,
.owner_cpu: 0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted
6.15.0-rc2-next-20250417-00001-gf6a27738686c-dirty #28 PREEMPT
Hardware name: MediaTek MT8365 Open Platform EVK (DT)
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x60/0x80
dump_stack+0x18/0x24
spin_dump+0x78/0x88
do_raw_spin_lock+0x11c/0x120
_raw_spin_lock+0x20/0x2c
mtk_star_handle_irq+0xc0/0x22c [mtk_star_emac]
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x4c/0xb0
handle_fasteoi_irq+0xa0/0x1bc
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x120
do_interrupt_handler+0x50/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
regmap_mmio_read32le+0xc/0x20 (P)
_regmap_bus_reg_read+0x6c/0xac
_regmap_read+0x60/0xdc
regmap_read+0x4c/0x80
mtk_star_rx_poll+0x2f4/0x39c [mtk_star_emac]
__napi_poll+0x38/0x188
net_rx_action+0x164/0x2c0
handle_softirqs+0x100/0x244
__do_softirq+0x14/0x20
____do_softirq+0x10/0x20
call_on_irq_stack+0x24/0x64
do_softirq_own_stack+0x1c/0x40
__irq_exit_rcu+0xd4/0x10c
irq_exit_rcu+0x10/0x1c
el1_interrupt+0x38/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
cpuidle_enter_state+0xac/0x320 (P)
cpuidle_enter+0x38/0x50
do_idle+0x1e4/0x260
cpu_startup_entry+0x34/0x3c
rest_init+0xdc/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
``` |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/qcom-mpm: Prevent crash when trying to handle non-wake GPIOs
On Qualcomm chipsets not all GPIOs are wakeup capable. Those GPIOs do not
have a corresponding MPM pin and should not be handled inside the MPM
driver. The IRQ domain hierarchy is always applied, so it's required to
explicitly disconnect the hierarchy for those. The pinctrl-msm driver marks
these with GPIO_NO_WAKE_IRQ. qcom-pdc has a check for this, but
irq-qcom-mpm is currently missing the check. This is causing crashes when
setting up interrupts for non-wake GPIOs:
root@rb1:~# gpiomon -c gpiochip1 10
irq: IRQ159: trimming hierarchy from :soc@0:interrupt-controller@f200000-1
Unable to handle kernel paging request at virtual address ffff8000a1dc3820
Hardware name: Qualcomm Technologies, Inc. Robotics RB1 (DT)
pc : mpm_set_type+0x80/0xcc
lr : mpm_set_type+0x5c/0xcc
Call trace:
mpm_set_type+0x80/0xcc (P)
qcom_mpm_set_type+0x64/0x158
irq_chip_set_type_parent+0x20/0x38
msm_gpio_irq_set_type+0x50/0x530
__irq_set_trigger+0x60/0x184
__setup_irq+0x304/0x6bc
request_threaded_irq+0xc8/0x19c
edge_detector_setup+0x260/0x364
linereq_create+0x420/0x5a8
gpio_ioctl+0x2d4/0x6c0
Fix this by copying the check for GPIO_NO_WAKE_IRQ from qcom-pdc.c, so that
MPM is removed entirely from the hierarchy for non-wake GPIOs. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Acquire a lock on kvm->srcu when userspace is getting MP state to handle a
rather extreme edge case where "accepting" APIC events, i.e. processing
pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU
is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP
state will trigger a nested VM-Exit by way of ->check_nested_events(), and
emuating the nested VM-Exit can access guest memory.
The splat was originally hit by syzkaller on a Google-internal kernel, and
reproduced on an upstream kernel by hacking the triple_fault_event_test
selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a
memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario.
=============================
WARNING: suspicious RCU usage
6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted
-----------------------------
include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by triple_fault_ev/1256:
#0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm]
stack backtrace:
CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x144/0x190
kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
read_and_check_msr_entry+0x2e/0x180 [kvm_intel]
__nested_vmx_vmexit+0x550/0xde0 [kvm_intel]
kvm_check_nested_events+0x1b/0x30 [kvm]
kvm_apic_accept_events+0x33/0x100 [kvm]
kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm]
kvm_vcpu_ioctl+0x33e/0x9a0 [kvm]
__x64_sys_ioctl+0x8b/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately. |
| In the Linux kernel, the following vulnerability has been resolved:
net: decrease cached dst counters in dst_release
Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in
dst_release()") moved decrementing the dst count from dst_destroy to
dst_release to avoid accessing already freed data in case of netns
dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels
are used, this fix is incomplete as the same issue will be seen for
cached dsts:
Unable to handle kernel paging request at virtual address ffff5aabf6b5c000
Call trace:
percpu_counter_add_batch+0x3c/0x160 (P)
dst_release+0xec/0x108
dst_cache_destroy+0x68/0xd8
dst_destroy+0x13c/0x168
dst_destroy_rcu+0x1c/0xb0
rcu_do_batch+0x18c/0x7d0
rcu_core+0x174/0x378
rcu_core_si+0x18/0x30
Fix this by invalidating the cache, and thus decrementing cached dst
counters, in dst_release too. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix flush_tlb_range() when used for zapping normal PMDs
On the following path, flush_tlb_range() can be used for zapping normal
PMD entries (PMD entries that point to page tables) together with the PTE
entries in the pointed-to page table:
collapse_pte_mapped_thp
pmdp_collapse_flush
flush_tlb_range
The arm64 version of flush_tlb_range() has a comment describing that it can
be used for page table removal, and does not use any last-level
invalidation optimizations. Fix the X86 version by making it behave the
same way.
Currently, X86 only uses this information for the following two purposes,
which I think means the issue doesn't have much impact:
- In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be
IPI'd to avoid issues with speculative page table walks.
- In Hyper-V TLB paravirtualization, again for lazy TLB stuff.
The patch "x86/mm: only invalidate final translations with INVLPGB" which
is currently under review (see
<https://lore.kernel.org/all/20241230175550.4046587-13-riel@surriel.com/>)
would probably be making the impact of this a lot worse. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix checksums set in idpf_rx_rsc()
idpf_rx_rsc() uses skb_transport_offset(skb) while the transport header
is not set yet.
This triggers the following warning for CONFIG_DEBUG_NET=y builds.
DEBUG_NET_WARN_ON_ONCE(!skb_transport_header_was_set(skb))
[ 69.261620] WARNING: CPU: 7 PID: 0 at ./include/linux/skbuff.h:3020 idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261629] Modules linked in: vfat fat dummy bridge intel_uncore_frequency_tpmi intel_uncore_frequency_common intel_vsec_tpmi idpf intel_vsec cdc_ncm cdc_eem cdc_ether usbnet mii xhci_pci xhci_hcd ehci_pci ehci_hcd libeth
[ 69.261644] CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Tainted: G S W 6.14.0-smp-DEV #1697
[ 69.261648] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 69.261650] RIP: 0010:idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261677] ? __warn (kernel/panic.c:242 kernel/panic.c:748)
[ 69.261682] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261687] ? report_bug (lib/bug.c:?)
[ 69.261690] ? handle_bug (arch/x86/kernel/traps.c:285)
[ 69.261694] ? exc_invalid_op (arch/x86/kernel/traps.c:309)
[ 69.261697] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:621)
[ 69.261700] ? __pfx_idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:4011) idpf
[ 69.261704] ? idpf_vport_splitq_napi_poll (include/linux/skbuff.h:3020) idpf
[ 69.261708] ? idpf_vport_splitq_napi_poll (drivers/net/ethernet/intel/idpf/idpf_txrx.c:3072) idpf
[ 69.261712] __napi_poll (net/core/dev.c:7194)
[ 69.261716] net_rx_action (net/core/dev.c:7265)
[ 69.261718] ? __qdisc_run (net/sched/sch_generic.c:293)
[ 69.261721] ? sched_clock (arch/x86/include/asm/preempt.h:84 arch/x86/kernel/tsc.c:288)
[ 69.261726] handle_softirqs (kernel/softirq.c:561) |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Add RCU read lock protection to perf_iterate_ctx()
The perf_iterate_ctx() function performs RCU list traversal but
currently lacks RCU read lock protection. This causes lockdep warnings
when running perf probe with unshare(1) under CONFIG_PROVE_RCU_LIST=y:
WARNING: suspicious RCU usage
kernel/events/core.c:8168 RCU-list traversed in non-reader section!!
Call Trace:
lockdep_rcu_suspicious
? perf_event_addr_filters_apply
perf_iterate_ctx
perf_event_exec
begin_new_exec
? load_elf_phdrs
load_elf_binary
? lock_acquire
? find_held_lock
? bprm_execve
bprm_execve
do_execveat_common.isra.0
__x64_sys_execve
do_syscall_64
entry_SYSCALL_64_after_hwframe
This protection was previously present but was removed in commit
bd2756811766 ("perf: Rewrite core context handling"). Add back the
necessary rcu_read_lock()/rcu_read_unlock() pair around
perf_iterate_ctx() call in perf_event_exec().
[ mingo: Use scoped_guard() as suggested by Peter ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix the page details for the srq created by kernel consumers
While using nvme target with use_srq on, below kernel panic is noticed.
[ 549.698111] bnxt_en 0000:41:00.0 enp65s0np0: FEC autoneg off encoding: Clause 91 RS(544,514)
[ 566.393619] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI
..
[ 566.393799] <TASK>
[ 566.393807] ? __die_body+0x1a/0x60
[ 566.393823] ? die+0x38/0x60
[ 566.393835] ? do_trap+0xe4/0x110
[ 566.393847] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393867] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393881] ? do_error_trap+0x7c/0x120
[ 566.393890] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393911] ? exc_divide_error+0x34/0x50
[ 566.393923] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393939] ? asm_exc_divide_error+0x16/0x20
[ 566.393966] ? bnxt_qplib_alloc_init_hwq+0x1d4/0x580 [bnxt_re]
[ 566.393997] bnxt_qplib_create_srq+0xc9/0x340 [bnxt_re]
[ 566.394040] bnxt_re_create_srq+0x335/0x3b0 [bnxt_re]
[ 566.394057] ? srso_return_thunk+0x5/0x5f
[ 566.394068] ? __init_swait_queue_head+0x4a/0x60
[ 566.394090] ib_create_srq_user+0xa7/0x150 [ib_core]
[ 566.394147] nvmet_rdma_queue_connect+0x7d0/0xbe0 [nvmet_rdma]
[ 566.394174] ? lock_release+0x22c/0x3f0
[ 566.394187] ? srso_return_thunk+0x5/0x5f
Page size and shift info is set only for the user space SRQs.
Set page size and page shift for kernel space SRQs also. |
| In the Linux kernel, the following vulnerability has been resolved:
net: better track kernel sockets lifetime
While kernel sockets are dismantled during pernet_operations->exit(),
their freeing can be delayed by any tx packets still held in qdisc
or device queues, due to skb_set_owner_w() prior calls.
This then trigger the following warning from ref_tracker_dir_exit() [1]
To fix this, make sure that kernel sockets own a reference on net->passive.
Add sk_net_refcnt_upgrade() helper, used whenever a kernel socket
is converted to a refcounted one.
[1]
[ 136.263918][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.263918][ T35] sk_alloc+0x2b3/0x370
[ 136.263918][ T35] inet6_create+0x6ce/0x10f0
[ 136.263918][ T35] __sock_create+0x4c0/0xa30
[ 136.263918][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.263918][ T35] igmp6_net_init+0x39/0x390
[ 136.263918][ T35] ops_init+0x31e/0x590
[ 136.263918][ T35] setup_net+0x287/0x9e0
[ 136.263918][ T35] copy_net_ns+0x33f/0x570
[ 136.263918][ T35] create_new_namespaces+0x425/0x7b0
[ 136.263918][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.263918][ T35] ksys_unshare+0x57d/0xa70
[ 136.263918][ T35] __x64_sys_unshare+0x38/0x40
[ 136.263918][ T35] do_syscall_64+0xf3/0x230
[ 136.263918][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 136.263918][ T35]
[ 136.343488][ T35] ref_tracker: net notrefcnt@ffff8880638f01e0 has 1/2 users at
[ 136.343488][ T35] sk_alloc+0x2b3/0x370
[ 136.343488][ T35] inet6_create+0x6ce/0x10f0
[ 136.343488][ T35] __sock_create+0x4c0/0xa30
[ 136.343488][ T35] inet_ctl_sock_create+0xc2/0x250
[ 136.343488][ T35] ndisc_net_init+0xa7/0x2b0
[ 136.343488][ T35] ops_init+0x31e/0x590
[ 136.343488][ T35] setup_net+0x287/0x9e0
[ 136.343488][ T35] copy_net_ns+0x33f/0x570
[ 136.343488][ T35] create_new_namespaces+0x425/0x7b0
[ 136.343488][ T35] unshare_nsproxy_namespaces+0x124/0x180
[ 136.343488][ T35] ksys_unshare+0x57d/0xa70
[ 136.343488][ T35] __x64_sys_unshare+0x38/0x40
[ 136.343488][ T35] do_syscall_64+0xf3/0x230
[ 136.343488][ T35] entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix suspicious RCU usage
Commit <d74169ceb0d2> ("iommu/vt-d: Allocate DMAR fault interrupts
locally") moved the call to enable_drhd_fault_handling() to a code
path that does not hold any lock while traversing the drhd list. Fix
it by ensuring the dmar_global_lock lock is held when traversing the
drhd list.
Without this fix, the following warning is triggered:
=============================
WARNING: suspicious RCU usage
6.14.0-rc3 #55 Not tainted
-----------------------------
drivers/iommu/intel/dmar.c:2046 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 1
2 locks held by cpuhp/1/23:
#0: ffffffff84a67c50 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
#1: ffffffff84a6a380 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x87/0x2c0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: cpuhp/1 Not tainted 6.14.0-rc3 #55
Call Trace:
<TASK>
dump_stack_lvl+0xb7/0xd0
lockdep_rcu_suspicious+0x159/0x1f0
? __pfx_enable_drhd_fault_handling+0x10/0x10
enable_drhd_fault_handling+0x151/0x180
cpuhp_invoke_callback+0x1df/0x990
cpuhp_thread_fun+0x1ea/0x2c0
smpboot_thread_fn+0x1f5/0x2e0
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0x12a/0x2d0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x4a/0x60
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Holding the lock in enable_drhd_fault_handling() triggers a lockdep splat
about a possible deadlock between dmar_global_lock and cpu_hotplug_lock.
This is avoided by not holding dmar_global_lock when calling
iommu_device_register(), which initiates the device probe process. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: always handle address removal under msk socket lock
Syzkaller reported a lockdep splat in the PM control path:
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 sock_owned_by_me include/net/sock.h:1711 [inline]
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 msk_owned_by_me net/mptcp/protocol.h:363 [inline]
WARNING: CPU: 0 PID: 6693 at ./include/net/sock.h:1711 mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788
Modules linked in:
CPU: 0 UID: 0 PID: 6693 Comm: syz.0.205 Not tainted 6.14.0-rc2-syzkaller-00303-gad1b832bf1cf #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
RIP: 0010:sock_owned_by_me include/net/sock.h:1711 [inline]
RIP: 0010:msk_owned_by_me net/mptcp/protocol.h:363 [inline]
RIP: 0010:mptcp_pm_nl_addr_send_ack+0x57c/0x610 net/mptcp/pm_netlink.c:788
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ca 7b d3 f5 eb b9 e8 c3 7b d3 f5 90 0f 0b 90 e9 dd fb ff ff e8 b5 7b d3 f5 90 <0f> 0b 90 e9 3e fb ff ff 44 89 f1 80 e1 07 38 c1 0f 8c eb fb ff ff
RSP: 0000:ffffc900034f6f60 EFLAGS: 00010283
RAX: ffffffff8bee3c2b RBX: 0000000000000001 RCX: 0000000000080000
RDX: ffffc90004d42000 RSI: 000000000000a407 RDI: 000000000000a408
RBP: ffffc900034f7030 R08: ffffffff8bee37f6 R09: 0100000000000000
R10: dffffc0000000000 R11: ffffed100bcc62e4 R12: ffff88805e6316e0
R13: ffff88805e630c00 R14: dffffc0000000000 R15: ffff88805e630c00
FS: 00007f7e9a7e96c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2fd18ff8 CR3: 0000000032c24000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
mptcp_pm_remove_addr+0x103/0x1d0 net/mptcp/pm.c:59
mptcp_pm_remove_anno_addr+0x1f4/0x2f0 net/mptcp/pm_netlink.c:1486
mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_netlink.c:1518 [inline]
mptcp_pm_nl_del_addr_doit+0x118d/0x1af0 net/mptcp/pm_netlink.c:1629
genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0xb1f/0xec0 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x206/0x480 net/netlink/af_netlink.c:2543
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1322 [inline]
netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1348
netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:733
____sys_sendmsg+0x53a/0x860 net/socket.c:2573
___sys_sendmsg net/socket.c:2627 [inline]
__sys_sendmsg+0x269/0x350 net/socket.c:2659
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7e9998cde9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f7e9a7e9038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f7e99ba5fa0 RCX: 00007f7e9998cde9
RDX: 000000002000c094 RSI: 0000400000000000 RDI: 0000000000000007
RBP: 00007f7e99a0e2a0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 00007f7e99ba5fa0 R15: 00007fff49231088
Indeed the PM can try to send a RM_ADDR over a msk without acquiring
first the msk socket lock.
The bugged code-path comes from an early optimization: when there
are no subflows, the PM should (usually) not send RM_ADDR
notifications.
The above statement is incorrect, as without locks another process
could concur
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: allow small head cache usage with large MAX_SKB_FRAGS values
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache. |
| In the Linux kernel, the following vulnerability has been resolved:
net: xdp: Disallow attaching device-bound programs in generic mode
Device-bound programs are used to support RX metadata kfuncs. These
kfuncs are driver-specific and rely on the driver context to read the
metadata. This means they can't work in generic XDP mode. However, there
is no check to disallow such programs from being attached in generic
mode, in which case the metadata kfuncs will be called in an invalid
context, leading to crashes.
Fix this by adding a check to disallow attaching device-bound programs
in generic mode. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime
After commit ec6bb299c7c3 ("md/md-bitmap: add 'sync_size' into struct
md_bitmap_stats"), following panic is reported:
Oops: general protection fault, probably for non-canonical address
RIP: 0010:bitmap_get_stats+0x2b/0xa0
Call Trace:
<TASK>
md_seq_show+0x2d2/0x5b0
seq_read_iter+0x2b9/0x470
seq_read+0x12f/0x180
proc_reg_read+0x57/0xb0
vfs_read+0xf6/0x380
ksys_read+0x6c/0xf0
do_syscall_64+0x82/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Root cause is that bitmap_get_stats() can be called at anytime if mddev
is still there, even if bitmap is destroyed, or not fully initialized.
Deferenceing bitmap in this case can crash the kernel. Meanwhile, the
above commit start to deferencing bitmap->storage, make the problem
easier to trigger.
Fix the problem by protecting bitmap_get_stats() with bitmap_info.mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
kernel: be more careful about dup_mmap() failures and uprobe registering
If a memory allocation fails during dup_mmap(), the maple tree can be left
in an unsafe state for other iterators besides the exit path. All the
locks are dropped before the exit_mmap() call (in mm/mmap.c), but the
incomplete mm_struct can be reached through (at least) the rmap finding
the vmas which have a pointer back to the mm_struct.
Up to this point, there have been no issues with being able to find an
mm_struct that was only partially initialised. Syzbot was able to make
the incomplete mm_struct fail with recent forking changes, so it has been
proven unsafe to use the mm_struct that hasn't been initialised, as
referenced in the link below.
Although 8ac662f5da19f ("fork: avoid inappropriate uprobe access to
invalid mm") fixed the uprobe access, it does not completely remove the
race.
This patch sets the MMF_OOM_SKIP to avoid the iteration of the vmas on the
oom side (even though this is extremely unlikely to be selected as an oom
victim in the race window), and sets MMF_UNSTABLE to avoid other potential
users from using a partially initialised mm_struct.
When registering vmas for uprobe, skip the vmas in an mm that is marked
unstable. Modifying a vma in an unstable mm may cause issues if the mm
isn't fully initialised. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix missing run load for vcn0 in attr_data_get_block_locked()
When a compressed or sparse attribute has its clusters frame-aligned,
vcn is rounded down to the frame start using cmask, which can result
in vcn != vcn0. In this case, vcn and vcn0 may reside in different
attribute segments.
The code already handles the case where vcn is in a different segment
by loading its runs before allocation. However, it fails to load runs
for vcn0 when vcn0 resides in a different segment than vcn. This causes
run_lookup_entry() to return SPARSE_LCN for vcn0 since its segment was
never loaded into the in-memory run list, triggering the WARN_ON(1).
Fix this by adding a missing check for vcn0 after the existing vcn
segment check. If vcn0 falls outside the current segment range
[svcn, evcn1), find and load the attribute segment containing vcn0
before performing the run lookup.
The following scenario triggers the bug:
attr_data_get_block_locked()
vcn = vcn0 & cmask <- vcn != vcn0 after frame alignment
load runs for vcn segment <- vcn0 segment not loaded!
attr_allocate_clusters() <- allocation succeeds
run_lookup_entry(vcn0) <- vcn0 not in run -> SPARSE_LCN
WARN_ON(1) <- bug fires here! |
