| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FFmpeg versions 8.0 through 8.1.2 contains a stack buffer overflow vulnerability in the Vulkan HEVC hardware decoder that allows remote attackers to overwrite return addresses and adjacent stack frames by supplying a crafted HEVC/H.265 bitstream. Attackers can embed a malicious vps_num_hrd_parameters value exceeding HEVC_MAX_SUB_LAYERS in any supported container format to overflow stack-allocated arrays in the vk_hevc_end_frame function, potentially achieving arbitrary code execution. |
| Adminer before 5.4.3 contains a cookie injection vulnerability that allows attackers to manipulate cookie attributes by injecting arbitrary values through the unsanitized X-Forwarded-Prefix HTTP header used in Set-Cookie path attributes. Attackers can exploit a misconfigured reverse proxy to downgrade SameSite protection and enable cross-origin authenticated requests, bypassing cookie security controls. |
| Roo Code through 3.54.0 contains a command injection vulnerability in the auto-approve execute feature that allows attackers to bypass allowlist/denylist enforcement by nesting command substitutions inside parameter expansion defaults. The command parser in parse-command.ts replaces parameter expansions with opaque placeholders before extracting command substitutions, causing the containsDangerousSubstitution guard to miss nested payloads, which are then auto-approved based on the outer allowlisted command prefix and executed by the shell via execa, enabling arbitrary command execution. |
| libde265 is an open source implementation of the h.265 video codec. Prior to version 1.0.19, `decoder_context::decode_slice_unit_tiles` (libde265/decctx.cc:920) reads `pps.CtbAddrRStoTS[ctbAddrRS]` at line 966 where `ctbAddrRS = ctbY * ctbsWidth + ctbX` is computed from PPS-supplied `colBd[]`/`rowBd[]` arrays without validating the result against `CtbAddrRStoTS.size() == sps->PicSizeInCtbsY`. A malformed PPS that passes `set_derived_values` but encodes geometry inconsistent with the SPS produces a `ctbAddrRS` past the allocation, causing a 4-byte heap-buffer-overflow READ. Version 1.0.19 fixes the issue. |
| libde265 is an open source implementation of the h.265 video codec. Versions prior to 1.0.19 have a heap buffer overflow (out-of-bounds READ) exists in `decoder_context::decode_slice_unit_WPP()` in `libde265/decctx.cc`. When decoding a WPP (Wavefront Parallel Processing) HEVC slice, `ctbAddrRS` is computed as `ctbRow * ctbsWidth` inside the entry-point loop. If the PPS/SPS headers are crafted so that this value exceeds `pps.CtbAddrRStoTS.size()`, the subsequent array access `pps.CtbAddrRStoTS[ctbAddrRS]` reads past the end of the allocated vector, triggering a heap-buffer-overflow confirmed by AddressSanitizer. Version 1.0.19 patches the issue. |
| A signed integer overflow vulnerability was found in libarchive's ZIP writer. In the archive_write_zip_header function in archive_write_set_format_zip.c, when ZIP encryption is enabled and the entry file size is close to INT64_MAX, the addition of the encryption overhead to the entry size overflows int64_t, resulting in undefined behavior. This could lead to incorrect Zip64 extension decisions or potential memory corruption. |
| Using expressions that generate large arrays it is possible to craft a query that creates very large intermediate objects in memory, causing the server to crash with OOM error. |
| Unauthenticated Unknown in Falcon – WordPress Optimizations & Tweaks <= 2.10.0 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: copy only received bytes on short ep0 read
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:
data = kmalloc(len, GFP_KERNEL);
...
ret = __ffs_ep0_queue_wait(ffs, data, len);
if ((ret > 0) && (copy_to_user(buf, data, len)))
ret = -EFAULT;
__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len. The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.
Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:
* dwc2 continues on req->actual < req->length for ep0 DATA OUT
(short-not-ok is the only ep0-OUT stall path).
* aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
* renesas_usbf logs "ep0 short packet" and completes the
request.
* dwc3 stalls on short IN but not on short OUT.
A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with. The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user(). This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace. Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check. With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.
Fix by copying only ret (actually received) bytes to
userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: belkin_sa: validate interrupt status length
The Belkin interrupt callback treats interrupt data as a four-byte
status report and reads LSR/MSR fields at offsets 2 and 3. The
interrupt-in buffer length is derived from endpoint wMaxPacketSize, and
short interrupt transfers may complete successfully with a smaller
actual_length.
Check the completed interrupt packet length before parsing status
fields so short interrupt endpoints and short successful packets are
ignored instead of causing out-of-bounds or stale status-byte reads.
KASAN report as below:
BUG: KASAN: slab-out-of-bounds in belkin_sa_read_int_callback()
Read of size 1
Call trace:
belkin_sa_read_int_callback() (drivers/usb/serial/belkin_sa.c:202)
__usb_hcd_giveback_urb() (drivers/usb/core/hcd.c:1630)
dummy_timer() (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: check URB actual_length for interrupt-IN notifications
USBTMC devices can use an optional interrupt endpoint for notification
messages. These typically contain two-byte headers indicating the
payload format, but the driver does not check if these headers are
present before accessing the data buffers. In cases where the URB
actual_length is not enough to fit these headers, the driver will either
cause an out-of-bounds read, or consume stale leftover data from a
previous notification.
Fix by checking if actual_data contains enough bytes for the headers,
otherwise resubmit URB to the interrupt endpoint. |
| Hulumi is an open-source toolkit that ships secure-by-default cloud and platform infrastructure components for Pulumi. Prior to version 1.4.0, consumers using AccountFoundation could ship an AWS account whose CloudTrail / Config audit logs were deletable by any S3-delete-capable principal — while believing the startup-hardened tier guaranteed tamper-resistance. Sandbox-tier deployments had no audit immutability at all (defects 1 and 3 compounded). This issue has been patched in version 1.4.0. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
When setting the length of the GHCB scratch area, and the area is in the
GHCB shared buffer, set the effective length of the scratch area to the max
possible size given the start of the guest-provided pointer, and the end of
the shared buffer.
The code was "fine" when first introduced, as KVM doesn't consult the
length of the buffer when emulating MMIO, because the passed in @len always
specifies the *max* size required. But for PSC requests, the incoming @len
is just the minimum length (to process the header), and KVM needs to know
the full size of the scratch area to avoid buffer overflows (spoiler alert).
Opportunistically rename @len => @min_len to better reflect its role. |
| In the Linux kernel, the following vulnerability has been resolved:
auxdisplay: line-display: fix OOB read on zero-length message_store()
linedisp_display() unconditionally reads msg[count - 1] before
checking whether count is zero, so a write of zero bytes to the
message sysfs attribute hits msg[-1]:
write(fd, "", 0);
-> message_store(..., buf, count=0)
-> linedisp_display(linedisp, buf, count=0)
-> msg[count - 1] == '\n' ; OOB read
The kernfs write buffer for that store is a 1-byte allocation
(kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0),
so msg[-1] is a 1-byte read before the slab object. On a
KASAN-enabled kernel this trips an out-of-bounds report and
panics; on stock kernels it silently reads adjacent slab data
and, if that byte happens to be '\n', the following count--
wraps ssize_t 0 to -1 and is then passed to kmemdup_nul().
linedisp_display() is reached from the message_store() sysfs
callback (drivers/auxdisplay/line-display.c message attribute,
mode 0644) and from the in-tree initial-message setup with
count == -1, so the OOB path is only userspace-triggerable via
zero-byte writes; vfs_write() does not short-circuit on
count == 0 and kernfs_fop_write_iter() dispatches the store
callback regardless.
Guard the trailing-newline trim with a count check. The
existing if (!count) block then takes the clear-display path
unchanged.
Affects every auxdisplay driver that registers via
linedisp_register() / linedisp_attach(): ht16k33, max6959,
img-ascii-lcd, seg-led-gpio. |
| In NLnet Labs Unbound 1.25.0 up to and including 1.25.1, a fix that makes the 'respip' and 'dns64' modules work together, creates a shallow copy of the view name in effect that could lead to memory corruption if the owner of the original view name is jostled out when Unbound is under pressure. Unbound needs to be configured with one of 'respip'/'rpz' modules, together with a module that can attach subqueries (respip CNAME redirection, dns64, subnetcache) and a configured 'access-control-view' while Unbound is under pressure so that joslte logic kicks in and starts dropping slow queries. The subquery is getting a shallow copy of the view name and if the super query which owns the view name is jostled out, memory corruption can occur. Likelihood of a crash is low, since it relies heavily on the underlying memory allocator and the memory layout. Debug memory builds (e.g., ASAN) that catch the free terminate the server. |
| @fastify/static evaluates the allowedPath callback before normalizing dot segments and duplicate path separators in the pathname used for file resolution. Versions up to and including 10.1.1 are affected. An unauthenticated attacker can bypass allowedPath restrictions by requesting equivalent non-canonical pathnames, causing files that were intended to be denied to be served anyway. The bypass does not allow access outside the configured static root by itself, it defeats path-based filtering only. The issue is patched in @fastify/static 10.1.2. |
| The issue was addressed with improved memory handling. This issue is fixed in Safari 26.5.2, iOS 26.5.2 and iPadOS 26.5.2, macOS Tahoe 26.5.2, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected process crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc. |
| TOML::XS versions before 0.06 for Perl bundle an unsupported and vulnerable version of tomlc99.
The tomlc99 library is no longer maintained, and has an uncontrolled recursion vulnerability publicly reported in the issue tracker.
Any caller that passes untrusted TOML to from_toml risks a stack overflow from a deeply-nested document.
TOML::XS version 0.06 or later uses the successor tomlc17 library. |
| Incorrect boundary conditions in the Audio/Video: Playback component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
