| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Splunk SOAR versions below 8.8.0, an authenticated user who can view and edit containers in at least one container label could create artifacts with parent relationships to containers and artifacts outside those labels. This could expose fields from restricted artifacts and modify incident lineage.
The vulnerability is possible because Splunk SOAR does not verify access to the selected parent container and parent artifact when it creates an artifact. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fail the mount if the casefold flag has changed
An unprivileged user in a user namespace can repeatedly trigger a kernel
warning with their own overlay mounts. They do so by changing the
casefold flag of the topmost layer's empty root, the top directory of
that layer, after the layers are set and before the mount is created.
The casefold flag of a directory makes name lookups in that directory
case-insensitive. All layers of an overlay must agree on casefolding.
ovl_mount_dir_check() reads the casefold flag of a layer root when
fsconfig() sets that layer, and saves the result in ofs->casefold. The
mount is created later, by another fsconfig() call with
FSCONFIG_CMD_CREATE.
The casefold flag of an empty directory can be changed.
The casefold flag of the overlay root must match ofs->casefold.
ovl_get_root() copies the flag from the topmost layer root, as it is
when the mount is created. On a mismatch, ovl_get_root() only does a
WARN_ON(), and the mount continues. The check is not a WARN_ON_ONCE(),
so each such mount warns again.
An unprivileged user needs CONFIG_UNICODE, and a tmpfs mounted with the
casefold option in their namespace.
Reproduced by changing the casefold flag of the empty upper directory
after the layers were set and before FSCONFIG_CMD_CREATE, with tmpfs and
ext4 layers, and as uid 1000 in a user namespace.
Fix this by replacing the WARN_ON() with a check that fails the mount
with -EINVAL. |
| In Splunk SOAR versions below 8.8.0, a user who can edit and run a playbook on a permitted label could cause Splunk SOAR to return custom-function status and callback state from another playbook run.
The issue results from insufficient binding between a custom-function-status request and the playbook run that initiates it. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/fair: Clear throttle state when leaving the fair class
Task-based CFS bandwidth throttling removes a task's fair sched_entity
while the scheduler core still considers the task queued. p->throttled
carries the fair-specific state across dequeue/enqueue operations.
DEQUEUE_CLASS removes the task from cfs_rq->throttled_limbo_list
but retains the bit. If the last finite CFS quota is disabled while
the task runs in another class, it is absent from the unthrottle walk and
the bit survives.
Returning to fair while cfs_bandwidth_used() is false then performs a real
fair enqueue with p->throttled still set.
After bandwidth is re-enabled, a class-change dequeue treats the
stale bit as limbo state and skips __dequeue_task(). p->se.on_rq therefore
remains set, and put_prev_task_fair() places the entity in the EEVDF tree
while the task moves to RT. On exit, the fair picker can select the
TASK_DEAD task. __schedule() then returns to do_task_dead(),
which hits BUG().
Keep p->throttled across migrations and group moves, but clear it on
DEQUEUE_CLASS because fair-specific state must not outlive fair-class
membership. A later return to fair uses the normal enqueue path. That path
still respects a throttled cfs_rq.
A KASAN, LOCKDEP and DEBUG_LIST v7.3 kernel reproduced the do_task_dead()
BUG in 3/3 root and 3/3 delegated uid-1000 runs with CapPrm=CapEff=0 and
RLIMIT_RTPRIO=1. The fix passed both matrices plus a 3/3 class-switch
control with bandwidth continuously enabled, without a scheduler warning,
KASAN report, lockdep splat or crash.
An AI coding assistant analyzed the state mismatch and drafted the initial
reproducer, fix candidate and this changelog. The source paths, trigger,
controls and results were rechecked against the cited revisions. |
| A path traversal vulnerability in Flatpak's handling of the files/etc directory during app deployment allows a malicious Flatpak app to cause certain host system files (such as passwd, group, machine-id, or resolv.conf) to be emptied or replaced with a symlink when the app is installed or upgraded. In system-wide installations, the write is performed as root. |
| A path traversal vulnerability in Flatpak's handling of the export/bin directory during app deployment allows a malicious Flatpak app to cause deletion of attacker-chosen files outside the deployment directory when the app is installed or upgraded. In system-wide installations, the deletion is performed as root. |
| In the Linux kernel, the following vulnerability has been resolved:
assoc_array: keep gc's cleanup out of the live tree on allocation failure
assoc_array_gc() builds a copy of the tree. Where the copy reaches a
shortcut, it allocates the copy of the shortcut with kmalloc_flex(),
fills it with memcpy(), links it into the new tree, and only then
allocates the copy of the node after it. The memcpy() leaves the new
shortcut's next_node pointing at the old tree's node, so if that second
allocation fails, the cleanup, assoc_array_destroy_subtree() on the new
tree, follows the new shortcut into the old tree, and the BUG_ON() on
the old node's back pointer fires.
Allocate the node first, and the shortcut once the node exists, freeing
the node again if the shortcut cannot be allocated. A copied shortcut
is then only linked into the new tree when the copy of its node is there
to follow it. Nothing else changes: with no allocation failing, the
trees gc builds are the same as before.
Found by a userspace test that makes each allocation of each operation
fail in turn. |
| In the Linux kernel, the following vulnerability has been resolved:
assoc_array: don't chain a new shortcut onto an existing one
When a full node's leaves and the new key all share the node's segment,
assoc_array_insert_into_terminal_node() replaces the node with a
shortcut to a pair of new nodes. If the node is itself the target of a
shortcut, the new shortcut is installed as that shortcut's next node,
and a shortcut leading to a shortcut is something nothing expects:
assoc_array_walk() indexes the second one as a node, and
assoc_array_apply_edit() hits the BUG_ON() in the loop that adjusts
nr_leaves_on_branch, on that same insertion.
Deletion gets a node there. When the subtree below a shortcut shrinks
enough, assoc_array_delete() collapses it into one node below the
shortcut, and the leaves it collects can all share that node's segment.
The next key that shares it too takes this path. Eighteen insertions
and a deletion are enough: sixteen keys that agree on bits 0-11, one
that leaves them at bit 8 and is deleted again, and one more that agrees
with the sixteen.
Have the new shortcut replace the one in front of the node as well.
assoc_array_insert_shortcut() gives it that shortcut's back pointer and
parent slot, so the caller installs it where that one was, and excises
the old shortcut along with the node, which takes a second entry in
excised_meta[]. The new shortcut's index key comes from the new key up
to the new skip level, so it covers what the old one did.
Found by a userspace test doing random insertions and deletions on keys
that share long prefixes; a targeted case builds a shortcut, deletes
down to the collapse and inserts one more key. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Fix global ASID handed out to two processes
On AMD CPUs with INVLPGB, two live processes can get the same MAX_ASID_AVAILABLE
global ASID value. The two then hit each other's TLB entries, so each can read
or corrupt the other's memory.
The global ASID space is managed lazily. When a global ASID is freed, its bit is
set in the global_asid_freed bitmap. Once the free ASID search reaches the end
of the global_asid_used bitmap, a global flush is done to really reclaim the
lazily freed global ASIDs.
However, the current code can assign the same global ASID to two different
processes, if one process is assigned MAX_ASID_AVAILABLE - 1, another process
MAX_ASID_AVAILABLE, and both stick around (keeping their global ASID numbers in
use) until the search wraps around again. At that point a third process could
also get assigned MAX_ASID_AVAILABLE.
the highest ASID stays in use, so it is not handed out again
last_global_asid stays below it, so no reset
the clear bits run out
find_next_zero_bit() returns MAX_ASID_AVAILABLE
global_asid_available > 0, so the failure is not caught
MAX_ASID_AVAILABLE is handed out as an ASID
A search only looks at the bits below MAX_ASID_AVAILABLE, so it cannot see that
this value is in use. The next failed search hands it out again, even if the
first process still holds it.
The fix used here is to reset the global ASID space after a failed search, and
to search again. If that search fails too, no global ASID is handed out.
The test for !global_asid_available is removed, because use_global_asid() only
calls allocate_global_asid() if global_asid_available > 0. The remaining test is
for a condition that should be impossible.
[ riel: simplify code, massage changelog and comment ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: keep the CS user fence BO in GTT
The CS ioctl hands the GPU the GART address of the user fence BO, but
since the BO keeps its own preferred and allowed domains, it no longer
makes sure the BO is in GTT. A user fence in a VRAM BO, which only needs
to be a page in size, gets its address from amdgpu_bo_gpu_offset(), which
warns about non-contiguous VRAM. On navi31, a CS with a user fence in a
4K VRAM BO, or in one created with AMDGPU_GEM_CREATE_VM_ALWAYS_VALID:
WARNING: amdgpu_object.c:1531 at amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu], CPU#11: cs_gem_checks/18393
RIP: 0010:amdgpu_bo_gpu_offset+0x86/0xb0 [amdgpu]
Call Trace:
<TASK>
amdgpu_cs_parser_bos.isra.0+0x4eb/0x850 [amdgpu]
amdgpu_cs_ioctl+0x97e/0x2510 [amdgpu]
drm_ioctl_kernel+0xac/0x110 [drm]
drm_ioctl+0x2c6/0x5b0 [drm]
__x64_sys_ioctl+0xa0/0xf0
do_syscall_64+0xa3/0x4d0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
and BOs which can't be in GTT at all, like GWS or OA ones of a page in
size, pass the checks as well.
Only take BOs which can't be anywhere else than in GTT as user fence,
which the CS then validates there along with its other BOs. While at it,
detect userptrs with amdgpu_ttm_tt_is_userptr(); amdgpu_ttm_tt_get_usermm()
returns NULL once the task which created the userptr is gone.
v2: only take BOs which can only be in GTT instead of special casing the
user fence BO in the validation, use amdgpu_ttm_tt_is_userptr()
(Christian)
(cherry picked from commit f16989def9561d04d0f2e77216f5319112d29bf1) |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix unmap_mapping_range() beyond 4 GiB on 32-bit
Commit 9eab0421fa94 ("mm: fix unmap_mapping_range high bits shift bug")
made holebegin and holelen unsigned before they are shifted, by casting
them to pgoff_t. That is an unsigned long: on a 32-bit kernel the cast
cuts off the upper half of the two loff_t values, so a hole which begins
at 4 GiB or beyond is taken for one in the first 4 GiB of the file.
truncate_pagecache() passes the new size of the file and asks for private
COWed pages to be unmapped as well. If a file of 6 GiB is truncated to
5 GiB, everything from 1 GiB on is unmapped, and what a process has
written to a private mapping of the range between 1 GiB and 5 GiB is
lost: it reads the contents of the file again.
Where the range has an end, the wrong range is unmapped instead of the
right one. The page cache copes with that, as it unmaps every folio that
it removes. The callers which only have unmap_mapping_range() to get
rid of user mappings do not, for example drm_vma_node_unmap(), whose fake
offsets reach beyond 4 GiB on 32-bit, and revoke_iomem() with physical
addresses of more than 32 bits.
Cast to u64 instead. Nothing changes for 64-bit kernels.
Fix generated by an LLM and sent by Josef Bacik in private. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mmu_gather: fix flushing ranges with 4 GiB or larger
__tlb_adjust_range() takes the size of the range which has to be flushed
as an unsigned int. Its callers, tlb_flush_{pte,pmd,pud,p4d}_range(), get
and pass an unsigned long. Consequently, a range that is 4 GiB or larger
gets truncated, possibly to 0.
On arm64 with hugetlb, a 64k kernel can have 16 GiB hugetlb folios
mapped contiguously at the PMD level and flush them when unmapping, and a
16k kernel can flush 64 GiB PUDs through tlb_unshare_pmd_ptdesc(). So
at least these two scenarios are affected.
Fix it by flushing the proper range instead of the truncated one by
properly using "unsigned long" for range_size.
Fix generated by an LLM and sent by Josef Bacik in private.
[ david: use two-tab indent, simplify description ] |
| Sensitive Data Exposure vulnerability in benoitc hackney allows Retrieve Embedded Sensitive Data.
The HTTP/3 redirect handler in src/hackney_h3.erl passes the original request headers unchanged to the redirect target without performing any cross-origin check. When a client issues an HTTP/3 request with follow_redirect enabled and includes Authorization or Cookie headers, a server responding with a 3xx redirect to a different host will cause the client to forward those credentials verbatim to the new origin.
The main hackney.erl module has maybe_strip_auth_on_redirect/2 (guarded by the location_trusted option) to address CVE-2018-1000007, but hackney_h3.erl is missing this protection entirely.
This issue affects hackney: from 3.1.1 before 4.0.1. |
| Authorization Bypass Through User-Controlled Key vulnerability in phenixdigital phoenix_storybook allows cross-session PubSub topic injection via a URL query parameter. An attacker who loads the component iframe with the topic of another session receives the control messages that the victim's playground sends to its iframe.
PhoenixStorybook.Story.ComponentIframeLive.handle_params/3 reads a PubSub topic from params["topic"] and broadcasts {:component_iframe_pid, self()} on it, with no check that the topic belongs to the requesting session. The playground uses the received pid as the target of its later messages (variation state, theme switches, extra-assign payloads). Releases published as phx_live_storybook have the same code in PhxLiveStorybook.Story.ComponentIframeLive.
This issue affects phoenix_storybook: from 0.5.0 before 1.1.0; phx_live_storybook: from 0.4.0 onward. |
| GPAC before 26.07.0 contains an uncontrolled recursion vulnerability in dasher_gather_deps() in src/filters/dasher.c that fails to detect cyclic stream dependency chains. Attackers can supply a crafted MPEG-2 TS file that MP4Box processes with -dash, exhausting the stack and crashing the process for denial of service. |
| Insufficient Session Expiration vulnerability in the OAuth token refresh grant in hexpm hexpm allows a user removed from an organization to keep reading its private packages.
expand_repositories_scope/3 in lib/hexpm/permissions.ex only rewrites the literal repositories scope, so an explicitly granted repository:<org> or docs:<org> scope passes through it untouched. The refresh grant re-derives a new token from the stored granted_scopes, which holds that expanded form, so every refresh reproduces the organization scope without revisiting membership. Because both CDN edges authorize repository access from the token claim without querying the database, an account removed from an organization retains read access for as long as it keeps refreshing, bounded by the 30 day refresh token lifetime rather than the 30 minute access token lifetime.
This issue affects hex.pm: from 2025-10-10 before 2026-08-24; hexpm/hexpm: from 650faa03af511e74c1b3b49ec12d35666b6984c4 before 50cffd206490c49c92d7b63c8505949682abedb0. |
| Insufficient Session Expiration vulnerability in team-alembic AshAuthentication and AshAuthentication Phoenix allows a revoked session to remain fully authenticated.
A resource configured with session_identifier :jti and require_token_presence_for_authentication? disabled stores its session value as <jti>:<subject>. The jti is there so that signing out can revoke that one session. Neither reader consults it: AshAuthentication.Plug.Helpers.authenticate_resource_from_session/4 and AshAuthentication.Phoenix.LiveSession.on_mount/4 both split the value with split_identifier/2, discard the jti and pass the bare subject to AshAuthentication.subject_to_user/3, which reloads the record. The token-presence branch of each function does check its token, calling AshAuthentication.TokenResource.Actions.get_token/3 with the jti and the purpose user. Because the revocation record is never read, neither its revoked state nor its expiry constrains the session, so a session captured before sign-out keeps working.
This issue affects ash_authentication: from 4.9.1 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14; ash_authentication_phoenix: from 2.10.0 before 2.17.4 and from 3.0.0-rc.0 before 3.0.0-rc.11. |
| In JetBrains TeamCity before 2026.2, 2026.1.4, 2025.11.8 project viewers could redirect GitHub App connection credentials of parent projects |
| A flaw has been found in hrshadhin CloudSchool up to 3.0.1. Affected by this issue is the function PublicController.checkSanity4Student of the file app/Http/Controllers/Backend/PublicController.php of the component Student Data Access Check. This manipulation of the argument student_id causes authorization bypass. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| XML External Entity (XXE) vulnerability in esaml (and its forks) allows an attacker to cause the system to read local files and incorporate their contents into processed SAML documents, and potentially perform SSRF via crafted SAML messages.
esaml parses attacker-controlled SAML messages using xmerl_scan:string/2 before signature verification without disabling XML entity expansion. On Erlang/OTP versions before 27, Xmerl allows entities by default, enabling pre-signature XXE attacks. An attacker can cause the host to read local files (e.g., Kubernetes-mounted secrets) into the SAML document. If the attacker is not a trusted SAML SP, signature verification will fail and the document is discarded, but file contents may still be exposed through logs or error messages.
This issue affects all versions of esaml, including forks by arekinath, handnot2, and dropbox. Users running on Erlang/OTP 27 or later are not affected due to Xmerl defaulting to entities disabled.
This issue affects esaml: all versions. |