| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in sysfs path
Since the start of the git history, brport_store() always acquired the
bridge lock. Back then this decision made sense: The bridge lock
protects the STP state of the bridge and its ports and at that time the
function was only used by two STP related attributes (cost and
priority).
Nowadays, brport_store() processes a lot more attributes and most of
them do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port: Only requires RTNL. Read locklessly by the data path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the two STP related attributes that require it. Remove the
now stale comment from br_switchdev_set_port_flag(). The
SWITCHDEV_F_DEFER flag can be removed in net-next.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
5 locks held by bash/372:
#0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740)
#1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343)
#2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344)
#3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326)
#4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235)
brport_store (net/bridge/br_sysfs_if.c:346)
kernfs_fop_write_iter (fs/kernfs/file.c:352)
new_sync_write (fs/read_write.c:595)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
net: nexthop: Increase weight to u16
In CLOS networks, as link failures occur at various points in the network,
ECMP weights of the involved nodes are adjusted to compensate. With high
fan-out of the involved nodes, and overall high number of nodes,
a (non-)ECMP weight ratio that we would like to configure does not fit into
8 bits. Instead of, say, 255:254, we might like to configure something like
1000:999. For these deployments, the 8-bit weight may not be enough.
To that end, in this patch increase the next hop weight from u8 to u16.
Increasing the width of an integral type can be tricky, because while the
code still compiles, the types may not check out anymore, and numerical
errors come up. To prevent this, the conversion was done in two steps.
First the type was changed from u8 to a single-member structure, which
invalidated all uses of the field. This allowed going through them one by
one and audit for type correctness. Then the structure was replaced with a
vanilla u16 again. This should ensure that no place was missed.
The UAPI for configuring nexthop group members is that an attribute
NHA_GROUP carries an array of struct nexthop_grp entries:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 resvd1;
__u16 resvd2;
};
The field resvd1 is currently validated and required to be zero. We can
lift this requirement and carry high-order bits of the weight in the
reserved field:
struct nexthop_grp {
__u32 id; /* nexthop id - must exist */
__u8 weight; /* weight of this nexthop */
__u8 weight_high;
__u16 resvd2;
};
Keeping the fields split this way was chosen in case an existing userspace
makes assumptions about the width of the weight field, and to sidestep any
endianness issues.
The weight field is currently encoded as the weight value minus one,
because weight of 0 is invalid. This same trick is impossible for the new
weight_high field, because zero must mean actual zero. With this in place:
- Old userspace is guaranteed to carry weight_high of 0, therefore
configuring 8-bit weights as appropriate. When dumping nexthops with
16-bit weight, it would only show the lower 8 bits. But configuring such
nexthops implies existence of userspace aware of the extension in the
first place.
- New userspace talking to an old kernel will work as long as it only
attempts to configure 8-bit weights, where the high-order bits are zero.
Old kernel will bounce attempts at configuring >8-bit weights.
Renaming reserved fields as they are allocated for some purpose is commonly
done in Linux. Whoever touches a reserved field is doing so at their own
risk. nexthop_grp::resvd1 in particular is currently used by at least
strace, however they carry an own copy of UAPI headers, and the conversion
should be trivial. A helper is provided for decoding the weight out of the
two fields. Forcing a conversion seems preferable to bending backwards and
introducing anonymous unions or whatever. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req
When fuse_resend() moves a request from fpq->processing back to
fiq->pending, it sets FR_PENDING and clears FR_SENT but does not
remove the requests intr_entry from fiq->interrupts. If the
request had FR_INTERRUPTED set from a prior signal, intr_entry
remains dangling on fiq->interrupts. When the requesting task
then receives a fatal signal, fuse_remove_pending_req() sees
FR_PENDING=1, removes the request from fiq->pending and frees it
via the refcount path, also without cleaning intr_entry. The
stale intr_entry causes use-after-free when fuse_read_interrupt()
iterates fiq->interrupts:
- list_del_init(&req->intr_entry) -> UAF write on freed slab
- req->in.h.unique -> UAF read, data leaked to userspace
Remove intr_entry from fiq->interrupts in fuse_resend() for
interrupted requests before they are placed back on fiq->pending.
Add a WARN_ON if the intr_entry is not empty on request destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
module: decompress: check return value of module_extend_max_pages()
module_extend_max_pages() calls kvrealloc() internally and returns
-ENOMEM on allocation failure. The return value is never checked.
If the initial allocation fails, info->pages remains NULL and
info->max_pages remains 0. Subsequent calls to module_get_next_page()
will attempt to dynamically grow the array by calling
module_extend_max_pages(info, 0) since info->used_pages is 0. This
results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated
as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel
oops.
Fix: add the missing error check after module_extend_max_pages() and
return immediately on failure. This matches the pattern used by every
other kvrealloc() caller in the module loading path.
[Sami: Corrected the analysis in the commit message.] |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: Handle TC_ACT_CONSUMED in tcf_qevent_handle
tcf_classify() can return TC_ACT_CONSUMED while the skb is held by the
defragmentation engine (e.g. act_ct on out-of-order fragments). When
that happens the skb is no longer owned by the caller and must not be
touched again.
tcf_qevent_handle() did not handle TC_ACT_CONSUMED: it fell through the
switch and returned the skb to the caller as if classification had
passed. The only qdisc that wires up qevents today is RED, via three call sites
(qe_mark on RED_PROB_MARK/HARD_MARK, qe_early_drop on congestion_drop)
red_enqueue() was continuing to operate on an skb it no longer owns in this
case -- enqueueing it, dropping it, or updating statistics. Resulting in a UAF.
tc qdisc add dev eth0 root handle 1: red ... qevent early_drop block 10
tc filter add block 10 ... action ct
(with ct defrag enabled and traffic that produces out-of-order
fragments, e.g. a fragmented UDP stream)
Handle TC_ACT_CONSUMED in tcf_qevent_handle() the same way the ingress
and egress fast paths do: treat it as stolen and return NULL without
touching the skb. Unlike the TC_ACT_STOLEN case, the skb must not be
dropped/freed here, as it is no longer owned by us. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Fix out-of-bounds access for twsk in tcp_ao_established_key().
lockdep_sock_is_held() was added in tcp_ao_established_key()
by the cited commit.
It can be called from tcp_v[46]_timewait_ack() with twsk.
Since it does not have sk->sk_lock, the lockdep annotation
results in out-of-bound access.
$ pahole -C tcp_timewait_sock vmlinux | grep size
/* size: 288, cachelines: 5, members: 8 */
$ pahole -C sock vmlinux | grep sk_lock
socket_lock_t sk_lock; /* 440 192 */
Let's not use lockdep_sock_is_held() for TCP_TIME_WAIT. |
| In the Linux kernel, the following vulnerability has been resolved:
partitions: aix: bound the pp_count scan to the ppe array
aix_partition() reads the physical volume descriptor into a fixed-size
struct pvd and then scans its physical-partition-extent array:
int numpps = be16_to_cpu(pvd->pp_count);
...
for (i = 0; i < numpps; i += 1) {
struct ppe *p = pvd->ppe + i;
...
lp_ix = be16_to_cpu(p->lp_ix);
pvd points at a single kmalloc()'d struct pvd whose ppe[] member holds a
fixed ARRAY_SIZE(pvd->ppe) (1016) entries, but the loop runs up to the
on-disk pp_count. pp_count is an unvalidated __be16 read straight from
the descriptor, so a crafted AIX image with pp_count larger than 1016
drives the loop to read pvd->ppe[i] past the end of the allocation (up
to 65535 entries, ~2 MB out of bounds).
The partition scan runs without mounting anything, when a block device
with a crafted AIX/IBM partition table appears (an attacker-supplied
image attached with losetup -P, or a device auto-scanned by udev), via
msdos_partition() -> aix_partition().
Clamp the scan to the number of entries the ppe[] array can hold. |
| Insufficient validation of untrusted input in Linux Toolkit Theming in Google Chrome on Linux prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| IBM Langflow OSS 1.0.0 through 1.10.0 Langflow could allow remote code execution due to incomplete validation enforcement on MCP server configuration files. |
| IBM Langflow OSS 1.0.0 through 1.10.1 Lanflow OSS contains an unauthenticated remote code execution vulnerability in the public flow build endpoint ( /api/v1/build_public_tmp/{flow_id}/flow ). The vulnerability stems from an incomplete denylist in the validate_public_flow_no_code_execution() function that fails to block several code-execution agent components including OpenDsStarAgent, CodeActAgentSmolagents, and CSVAgent. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Do not read uninitialized fragment address in airoha_dev_xmit()
The transmit loop in airoha_dev_xmit() reads fragment address and length
during its final iteration, when the loop index equals
skb_shinfo(skb)->nr_frags, at which point the fragment data is
uninitialized. While these values are never consumed, the read itself is
unsafe and may trigger a page fault. Fix this by avoiding the fragment
read on the last iteration.
Additionally, move the skb pointer from the first to the last used packet
descriptor, so that airoha_qdma_tx_napi_poll() defers freeing the skb
until the final descriptor is processed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: close TOCTOU race while computing rcv_wnd
The MPTCP output path access locklessly the MPTCP-level ack_seq
in multiple times, using possibly different values for the data_ack
in the DSS option and to compute the announced rcv wnd for the same
packet.
Refactor the cote to avoid inconsistencies which may confuse the
peer. Also ensure that the MPTCP level rcv wnd is updated only when
the egress packet actually contains a DSS ack. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
When parsing the radiotap header of an injected frame,
ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value
directly as a shift count:
info->control.antennas |= BIT(*iterator.this_arg);
*iterator.this_arg is an 8-bit value taken straight from the frame
supplied by userspace, so BIT() can be asked to shift by up to 255. That
is undefined behaviour on the unsigned long and is reported by UBSAN:
UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30
shift exponent 235 is too large for 64-bit type 'unsigned long'
Call Trace:
ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174
ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451
...
packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109
info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna
indices 0 and 1 can ever be represented. Ignore any larger value instead
of shifting out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp: usb: fix race between urb completion and rx_retry cancellation
It's possible that sequencing between setting ->stopped and cancelling
the rx_retry work (in ndo_stop) could leave us with an urb queued:
T1: ndo_stop T2: rx_retry_work
------------ ----------------
LD: ->stopped => false
ST: ->stopped <= true
usb_kill_urb()
mctp_usb_rx_queue()
usb_submit_urb()
cancel_delayed_work_sync()
That urb completion can then re-schedule rx_retry_work.
Strenghen the sequencing between the stop (preventing another requeue)
and the cancel by updating both atomically under a new rx lock. After
setting ->rx_stopped, and cancelling pending work, we know that the
requeue cannot occur, so all that's left is killing any pending urb. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: tlb: Flush walk cache when unsharing PMD tables
When huge_pmd_unshare() is called to unshare a PMD table, the
tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true
but the aarch64 tlb_flush() only checked tlb->freed_tables to
determine whether to use TLBF_NONE (vae1is, invalidates walk
cache) or TLBF_NOWALKCACHE (vale1is, leaf-only).
This caused the stale PMD page table entry to remain in the walk cache
after unshare, potentially leading to incorrect page table walks.
Fix by including unshared_tables in the check, so that when
unsharing tables, TLBF_NONE is used and the walk cache is properly
invalidated.
Here is the detailed distinction between vae1is and vale1is:
| Instruction Combination | Actual Invalidation Scope |
| ------------------------ | --------------------------------------------------|
| `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) |
| `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 |
| `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) |
| `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix lock leak on ENOMEM in AMDGPU_GEM_OP_GET_MAPPING_INFO
The AMDGPU_GEM_OP_GET_MAPPING_INFO branch of amdgpu_gem_op_ioctl()
holds three cleanup-tracked resources before calling kvcalloc():
the drm_gem_object reference from drm_gem_object_lookup(), the
drm_exec lock on the looked-up GEM via drm_exec_lock_obj(), and
the drm_exec lock on the per-process VM root page directory via
amdgpu_vm_lock_pd(). All three are released by the out_exec
label that every other error path in this function jumps to.
The kvcalloc() failure path returns -ENOMEM directly, skipping
out_exec and leaking all three.
The leaked per-process VM root PD dma_resv lock is the
load-bearing leak: any subsequent operation on the same VM
(further GEM ops, command-submission, eviction, TTM shrinker
callbacks) blocks on the held lock. DRM_IOCTL_AMDGPU_GEM_OP is
DRM_AUTH | DRM_RENDER_ALLOW, so this is an unprivileged-local
denial of service against the caller's GPU context, reachable
by any process with /dev/dri/renderD* access.
Route the failure through out_exec so drm_exec_fini() and
drm_gem_object_put() run.
Reproduced on stock 7.0.0-10, Ryzen 7 5700U / Radeon Vega
(Lucienne): the failing ioctl returns -ENOMEM and a second
GET_MAPPING_INFO on the same fd then blocks in
drm_exec_lock_obj() on the leaked dma_resv. SIGKILL on the
caller does not reap the task; the fd-release path during
process exit goes through amdgpu_gem_object_close() ->
drm_exec_prepare_obj() on the same lock, leaving the task in D
state until the box is rebooted. The patched kernel was not
rebuilt and re-tested on this hardware; the fix is mechanical.
Tested on a single Lucienne / Vega box only.
Ziyi Guo posted an independent INT_MAX-bound check for
args->num_entries in the same branch [1]; the two patches are
complementary and can land in either order.
(cherry picked from commit b69d3256d79de15f54c322986ff4da68f1d65b0a) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gem: fix race between change_handle and handle_delete
drm_gem_change_handle_ioctl leaves the old handle live in the IDR
during the window between spin_unlock(table_lock) and the final
spin_lock(table_lock). A concurrent drm_gem_handle_delete on the old
handle succeeds in this window, decrements handle_count to 0, and frees
the GEM object while the new handle's IDR entry still references it.
NULL the old handle's IDR entry before dropping table_lock so that any
concurrent GEM_CLOSE on the old handle sees NULL and returns -EINVAL.
Restore the old entry on the prime-bookkeeping error path. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this. |
