| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: ac100: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero.
This occurs in ac100_rtc_register_clks() due to .num being assigned only
after every clkout clock has been stored in .hws[]. With
CONFIG_UBSAN_BOUNDS and a compiler that implements __counted_by (GCC
15.1+ or Clang 20.1+), this triggers an array-index-out-of-bounds report
during probe, and with CONFIG_UBSAN_TRAP the first store traps.
Initialize .num with AC100_CLKOUT_NUM, the number of elements .hws[] was
allocated with, right after the allocation. That is the value the loop
counter ends up at on the success path anyway, so the provider's
behaviour is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: spear: initialize IRQ state before requesting alarm IRQ
devm_request_irq() enables the interrupt before it returns, so the handler
may run while probe is still initializing the device. Initialize the MMIO
address and spinlock before requesting the alarm IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: check RCV_SHUTDOWN after the sendmsg connect wait
sctp_wait_for_connect() drops the socket lock while it sleeps. An
out-of-the-blue ABORT can then be processed from the socket backlog and
unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets
RCV_SHUTDOWN, the waiter breaks with err == 0 before checking
asoc->base.dead. Its final sctp_association_put() can then free the
association, leaving sctp_sendmsg_to_asoc() to continue with a dangling
pointer.
Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc()
before using the association again. The check only accesses the socket,
so it needs no additional association reference. Return the existing
-ESRCH so that sctp_sendmsg() skips freeing a new association that may
already have been destroyed.
Keep sctp_wait_for_connect() unchanged to preserve its behavior for the
connect() caller. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: Disable TPM on null key name mismatch
The null key name check exists to protect against TPM reset attacks, so
a mismatch should stop the device from serving further requests.
Currently it does not disable the chip when it finds a mismatch.
The mismatch is logged:
tpm tpm0: null key integrity check failed
but the chip keeps serving commands:
/ # tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
...
tpm2_load_null() where the null key name check is run sets the chip as
disabled only if the rc is non zero. When the mismatch is seen, rc is
zero at that point and it returns success. The other issue is that the
caller expects the null key handle to be populated when the function
returns 0 which it does here without writing the handle and proceeds
assuming the null key handle is valid.
During the test, I noticed that tpm2_start_auth_session() uses the
uninitialized stack value as the key handle since tpm2_load_null()
returns 0 despite the integrity failure and proceeds with
TPM2_CC_START_AUTH_SESS with this value as salt key handle.
Set rc to -ENODEV on the mismatch. The error path then disables the chip
and returns the correct code to the caller.
Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making
TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name
of the re-created null key. The chip is now disabled on the mismatch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: clear post-EOF pagecache when extending a file via write
Fix netfs to erase the contents of a hole created after the EOF by an
ordinary write if dirty data has been previously left there by writes
through an mmapped region. Neither the buffered nor the unbuffered/DIO
write path clears that stale pagecache.
Zero the tail of the folio straddling the EOF before an extending
write. That is the only folio that can hold data written past the EOF
through an mmap, as pages wholly beyond the EOF can't be faulted in.
The folio is zeroed rather than dropped so a concurrent extending write
can't lose data.
Both write paths downgrade the i_rwsem to shared, so extending writes
can run concurrently and the i_size read by the caller may be stale by
the time the folio is locked. Re-read i_size under the folio lock and
clamp the zeroed range up to it, so a racing write that already put
data into the folio isn't clobbered.
Wait for any writeback on the folio to finish before zeroing it so that
the pagecache isn't modified while it may still be read by the transport
during transmission. Honour IOCB_NOWAIT by returning -EAGAIN rather
than blocking on the folio lock, on writeback, or in folio_mkclean()'s
rmap walk when the folio is mapped.
truncate_pagecache() can't be used here: it must be called with the
i_rwsem held exclusively, but these write paths only hold it shared,
and it would block unconditionally, breaking IOCB_NOWAIT.
Callers that hold i_rwsem exclusively for the whole resize (truncate,
setattr, fallocate, clone) exclude any genuine concurrent buffered
writer, so staleness can instead be decided from the folio's dirty
state, as pagecache_isize_extended() already does for filesystems that
serialise writes against truncate/setattr via a single i_rwsem.
Export netfs_clear_stale_post_isize() helper to handle such case.
The helper is required by the CIFS client to fix generic/363. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: zero gaps in read-gaps folio to avoid writing back stale data
netfs_read_gaps() leaves gaps around a streaming write's dirty region
unread on the server side, so a short/EOF response there left stale
folio content that later got written back.
Zero it after the read completes, not before: netfs_wait_for_read()
returns rreq->transferred once ret >= 0, so build an iterator over the
same bvec array the read used, advance past ret, and zero the rest.
The dirty region already maps to sink pages in that array rather than
the real folio, so this can't touch it, and only the actual shortfall
gets zeroed instead of the whole gap upfront. |
| In the Linux kernel, the following vulnerability has been resolved:
module: fix lost error code from codetag_load_module()
If codetag_load_module() fails, err is not set to reflect the failure
and load_module() returns 0 after the module has been torn down.
Also, if the module is a livepatch, mod->klp_info allocated by
copy_module_elf() leaks on this error path. Free it via a new
livepatch_cleanup label. |
| In the Linux kernel, the following vulnerability has been resolved:
virt: vmgenid: set driver_data before registering notification handlers
Both probe paths register their notification handler before assigning
driver_data, which the handler dereferences.
In the devicetree path, the notification IRQ can fire as soon as
devm_request_irq() registers the handler: the interrupt may already be
pending at probe time, for example when a VMM injects the
generation-changed notification while restoring a guest from a snapshot
that was taken before the driver had probed (Firecracker does exactly
this on snapshot restore). The IRQ is also requested with IRQF_SHARED,
so another device sharing the line can trigger the handler just as
early. The handler then calls vmgenid_notify(), which dereferences the
still-NULL driver_data and panics:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none)
Hardware name: linux,dummy-virt (DT)
pc : vmgenid_notify.isra.0+0x24/0x8c
lr : vmgenid_of_irq_handler+0x14/0x34
Call trace:
vmgenid_notify.isra.0+0x24/0x8c (P)
vmgenid_of_irq_handler+0x14/0x34
__handle_irq_event_percpu+0x44/0x1bc
handle_irq_event+0x4c/0xb4
handle_fasteoi_irq+0xf8/0x1f8
The ACPI path has the same ordering problem: the handler is installed
with acpi_install_notify_handler() before driver_data is assigned.
ACPI notifications are dispatched asynchronously from a workqueue, so
the window is narrow, but a notification arriving between the two calls
hits the same NULL dereference.
Assign driver_data before registering the handlers. The state is fully
initialized at that point, so the handlers are safe to run. Should
registration fail, the probe error path leaves no dangling pointer
behind: the driver core clears driver_data in device_unbind_cleanup(). |
| In the Linux kernel, the following vulnerability has been resolved:
vc_screen: reload vc pointer before if (ret) in vcs_write() to avoid UAF
The reload of 'vc' added by commit 8fb9ea65c9d1 ("vc_screen: reload load
of struct vc_data pointer in vcs_write() to avoid UAF") sits after the
'if (ret)' block, so the copy-failure break path exits the loop without
reloading vc. If the vc was kfree()'d via vc_port_destruct during the
unlocked copy_from_user() window, the post-loop
'if (written && vc) vcs_scr_updated(vc)' is reached with a stale
non-NULL vc. The '&& vc' guard from commit a287620312dc ("vc_screen:
fix null-ptr-deref in vcs_notifier() during concurrent vcs_write") only
handles the NULL case, not this stale-non-NULL case; vcs_notifier() then
reads param->vc->vc_num from freed memory:
BUG: KASAN: slab-use-after-free in vcs_notifier+0x7c/0xd0
Read of size 2 at addr ffff888007149190
Call Trace:
vcs_notifier+0x7c/0xd0
atomic_notifier_call_chain+0x70/0xa0
vcs_scr_updated+0x77/0xa0
vcs_write+0x71b/0x7e0
Allocated by task: vc_allocate -> con_install -> tty_open
Freed by task: kfree <- vt_ioctl (VT_DISALLOCATE -> vc_port_destruct)
Move the reload to immediately after console_lock(), before 'if (ret)',
so every break path below passes a fresh vc to the post-loop
vcs_scr_updated(). |
| In the Linux kernel, the following vulnerability has been resolved:
vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection()
In paste_selection(), the loop copies min_t(unsigned int,
vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into
tty_ldisc_receive_buf() and increments pasted += count.
Because the selection mutex (vc_sel.lock) is dropped inside the loop
Whenever the line discipline buffer fills up and paste_selection()
sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl
can replace vc_sel.buffer with a shorter selection and reduce
vc_sel.buf_len below pasted.
When paste_selection() resumes, vc_sel.buf_len - pasted underflows as an
unsigned integer to a large positive value, causing
tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, count) to read
up to 4094 bytes out-of-bounds past the newly allocated vc_sel.buffer.
Fix this by terminating the loop when pasted >= vc_sel.buf_len.
Kernel stack trace (Linux 7.3.0-rc3):
==================================================================
BUG: KASAN: slab-out-of-bounds in n_tty_receive_buf_common+0xa01/0x1650
Read of size 4094 at addr ffff888101c58010 by task kworker/u17:1/65
Workqueue: events_unbound flush_to_ldisc
Call Trace:
<TASK>
dump_stack_lvl+0x70/0xa0
print_report+0x153/0x4c6
kasan_report+0xf1/0x120
kasan_check_range+0x11c/0x200
__asan_memcpy+0x29/0x70
n_tty_receive_buf_common+0xa01/0x1650
tty_ldisc_receive_buf+0x66/0x110
tty_port_default_receive_buf+0x6b/0xb0
flush_to_ldisc+0x1b4/0x410
process_one_work+0x6ff/0x1110
worker_thread+0x4a8/0xb70
kthread+0x307/0x3e0
ret_from_fork+0x3ed/0x680
</TASK>
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
vt: skip screen update for DEC alignment test on backgroup consoles
[BUG]
Recently, we encountered a KASAN warning as follows:
BUG: KASAN: slab-out-of-bounds in fb_pad_aligned_buffer+0x11f/0x140
Read of size 1 at addr ff1100015fd9f6a4 by task tty_fbcon_oob/1239
CPU: 7 UID: 0 PID: 1239 Comm: tty_fbcon_oob Not tainted 7.3.0-rc1 #100 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
Call Trace:
<TASK>
...
kasan_report+0xf0/0x120
fb_pad_aligned_buffer+0x11f/0x140
ccw_putcs+0x86c/0xa80
fbcon_putcs+0x338/0x410
do_update_region+0x21d/0x450
do_con_write+0x1e0e/0x4880
con_write+0x13/0x80
n_tty_write+0x374/0x1010
file_tty_write.isra.0+0x404/0x7a0
...
reproduce:
1) open /dev/tty0, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET,
op.width = 8 and op.height = 16 (visible VC1)
2) open /dev/tty1, set a KDFONTOP ioctl with op.op = KD_FONT_OP_SET,
op.width = 28 and op.height = 24 (invisible VC2)
3) echo 3 > /sys/devices/virtual/graphics/fbcon/rotate_all
4) write EShash8(esc hash8) to tty1
[CAUSE]
All VCs render to the framebuffer. setfont only modifies the target VC's
font without resizing the framebuffer backing buffer (par->rotated.buf);
the buffer is only resized for the visible VC
(fbcon_do_set_font -> ... -> vc_do_resize -> update_screen). This relies on
the con_should_update() check performed before every update_region().
However, the ESC # 8 path (do_con_trol -> do_update_region) omits the
con_should_update() check. After changing the font size of an invisible VC,
do_update_region() fills using the new font size against a buffer that was
never resized, causing an out-of-bounds access.
[FIX]
Only push the update when the console is visible and not blanked, add
the con_should_update() check in the do_con_trol() like every other call
site of do_update_region() (update_region(), invert_screen(), ...). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: unregister the input device when probe fails
setup_card() registers the input device, whose name and phys point into
struct snd_usb_caiaqdev, and then goes on to snd_card_register() and
snd_usb_caiaq_control_init(). If either fails, snd_probe() calls
snd_card_free(), which frees the device state but leaves the input
device registered: card_free() only clears the pointer, and the input
device is unregistered from snd_disconnect() alone. Reading its "uevent"
attribute afterwards dereferences freed memory:
BUG: KASAN: slab-use-after-free in string+0x4a9/0x4f0
Read of size 1 at addr ffff8880208f5043 by task caiaq/4967
add_uevent_var+0x183/0x3a0
input_dev_uevent+0x162/0x900
dev_uevent+0x2f1/0x870
uevent_show+0x1ca/0x3a0
...
Unregister the input device on the probe error path, as
snd_disconnect() does. snd_usb_caiaq_input_disconnect() is a no-op when
no input device was registered.
Reproduced with a raw-gadget Audio Kontrol 1 and a temporary hack that
makes snd_usb_caiaq_control_init() fail. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: reject oversized playback packets
Each playback URB is handed a slice of out.buffer that is exactly
LINE6_ISO_PACKETS * max_packet_size_out bytes, sized from the OUT
endpoint, but the number of bytes written into that slice is never
compared against it.
submit_audio_out_urb() takes the frame count from prev_fsize, which
audio_in_callback() derived from the *IN* endpoint's received packet
length, and rescales it with the playback frame size; when prev_fsize is
still zero it synthesizes a length from the sample rate instead. On a
device declaring a large IN wMaxPacketSize and a small OUT
wMaxPacketSize, the resulting memcpy(), or the memset() when the
playback stream is idle, runs past its slice and, as the reproducer
below shows, beyond the allocation.
usb_submit_urb() is not a backstop. max_packet_size_out comes from
usb_maxpacket(), which returns only the low 11 bits of wMaxPacketSize,
while USB core validates a high-speed isochronous length against that
base scaled by usb_endpoint_maxp_mult(). A length of up to three times
the allocated slice is therefore accepted, and even a rejected URB is
only rejected after the write.
Reject a packet that does not fit the slice the driver allocated for it.
Clamping it instead would silently shorten the capture-derived rate
feedback and desynchronize the two streams.
BUG: KASAN: slab-out-of-bounds in submit_audio_out_urb (sound/usb/line6/playback.c:229)
Write of size 1024 at addr ffff888100bbd400 by task kworker/1:2/5002
Workqueue: events line6_startup_work
Call Trace:
__asan_memcpy (mm/kasan/shadow.c:106)
submit_audio_out_urb (sound/usb/line6/playback.c:229)
line6_submit_audio_out_all_urbs (sound/usb/line6/playback.c:291)
line6_stream_start (sound/usb/line6/pcm.c:194)
line6_pcm_acquire (sound/usb/line6/pcm.c:337)
line6_startup_work (sound/usb/line6/driver.c:728)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address belongs to the object at ffff888100bbd400
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes inside of
allocated 256-byte region [ffff888100bbd400, ffff888100bbd500) |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kionix-kx022a: Fix array boundary check
The driver performs a sanity check for an array size, when converting a
register value to an array index. The check incorrectly accepts the
sizeof(array) as a last index, when last valid index should be
sizeof(array) - 1.
Fix the check by bailing out when index >= sizeof(array). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: core: avoid double-free of OTP NVMEM device
If factory OTP setup fails after the user OTP NVMEM device has been
registered, mtd_otp_nvmem_add() unregisters the user device but leaves
mtd->otp_user_nvmem set. On an error, the caller unregisters it again.
For -EOPNOTSUPP, registration continues and normal teardown unregisters
it again.
Clear mtd->otp_user_nvmem after unregistering it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop oversized fragments to avoid extra_len overflow
In ieee80211_rx_h_defragment(), fragment payloads are accumulated into
entry->extra_len as subsequent fragments arrive:
entry->extra_len += rx->skb->len;
When the final fragment arrives, the head fragment is dequeued, and
pskb_expand_head() is called with entry->extra_len to ensure sufficient
tailroom for all queued fragments before copying:
if (skb_tailroom(rx->skb) < entry->extra_len) {
if (unlikely(pskb_expand_head(rx->skb, 0, entry->extra_len,
GFP_ATOMIC))) {
...
}
}
while ((skb = __skb_dequeue(&entry->skb_list))) {
skb_put_data(rx->skb, skb->data, skb->len);
dev_kfree_skb(skb);
}
In commit 69f132236827 ("mac80211: shrink struct
ieee80211_fragment_entry"), entry->extra_len was narrowed from unsigned
int to u16 in order to reduce structure memory footprint.
However, an IEEE 802.11 frame sequence can contain up to 16 fragments
(frag numbers 0..15). If a sequence of large fragments arrives (e.g. from
a malicious peer or rogue AP), the sum of fragment lengths can exceed
65535 bytes (for example, 15 fragments of 4400 bytes total 66000 bytes).
Because extra_len is a u16, this addition overflows and wraps around
modulo 65536 (e.g. 66000 wraps to 464).
Consequently, pskb_expand_head() allocates only the truncated amount of
tailroom (or is skipped entirely if the head fragment already has >= 464
bytes of tailroom). When skb_put_data() subsequently iterates through the
queued skb list, it appends the full payload into the undersized buffer,
causing skb_put() to trigger skb_over_panic() and crash the kernel in
softirq context.
A legitimate MSDU in IEEE 802.11 is at most 2304 bytes (or up to 7935/11454
bytes for A-MSDU, which is not fragmented), well below U16_MAX.
Fix this without increasing the size of struct ieee80211_fragment_entry by
checking whether adding the incoming fragment length would exceed U16_MAX.
If so, purge the queued fragments and drop the frame.
[assign a separate drop reason] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: bound TX aggregation to MAX_TX_BUF_SIZE
__hif_usb_tx() dequeues up to MAX_TX_AGGR_NUM (20) frames into a
single tx_buf of MAX_TX_BUF_SIZE (32768) bytes, limiting the batch
by record count but never by cumulative byte length.
With large frames (MTU 2304), 20 aggregated frames of 2292 bytes
each exceed the allocation (20 * 2296 = 45920 bytes), so the
memcpy() in the loop writes up to 13152 bytes past tx_buf->buf
before usb_submit_urb().
Peek the queue head and stop before copying any record that would
cross MAX_TX_BUF_SIZE, then dispatch the current batch. Leftover
skbs remain queued and are drained on the next URB completion.
The byte bound changes the loop's exit semantics: it can now exit
before i == tx_skb_cnt - 1. Stock only finalized tx_buf->len on
that last index (len += offset), so an early break would submit a
URB holding only the last record's length while every dequeued skb
is freed on completion, silently dropping frames. Make tx_buf->len
a running total and advance tx_buf->offset per record instead; the
stride round_up(nskb->len + 4, 4) is identical to the stock stride
when the loop runs to completion.
Tested on hardware with an MTU 2304 flood: the loop stops at
record 15 (len = 32144, offset = 32144, within 32768), no
oversized URB is submitted, and MTU 1500 pings pass 20/20. |
| In the Linux kernel, the following vulnerability has been resolved:
rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe()
devm_clk_get(&pdev->dev, "rtcref")'s return value was passed straight
into clk_get_rate() without checking it for an error first, unlike the
"rtc" clock a few lines above which is correctly checked with
IS_ERR(). clk_get_rate() only guards against a NULL clk, not an error
pointer:
if (!clk)
return 0;
...
rate = clk_core_get_rate_recalc(clk->core);
so if devm_clk_get() ever returns an error pointer here (for example
ERR_PTR(-EPROBE_DEFER), which is the normal, expected outcome if the
clkcfg clock-provider this RTC depends on has not registered its
clocks yet by the time this driver probes), clk_get_rate() dereferences
that error pointer instead of returning 0, crashing instead of letting
probe defer.
Capture the clock in the existing 'clk' local and check it with
IS_ERR() before calling clk_get_rate(), matching the handling already
used for the "rtc" clock in this same function. |
| In the Linux kernel, the following vulnerability has been resolved:
block: reject polled dio with user integrity metadata
IOCB_HAS_METADATA leaves iocb->private as a uio_meta, while
iocb_bio_iopoll() expects a bio. Since 2729a60bbfb9, metadata I/O
always uses __blkdev_direct_IO(), which never publishes the bio for
polling, so IOPOLL calls bio_poll() on the uio_meta.
Reproducer: io_uring IOPOLL plus a PI attribute on an integrity device
(scsi_debug dif=1 dix=1). KASAN reports:
Oops: general protection fault, probably for non-canonical
address 0xdffffc0000000004
KASAN: null-ptr-deref in range
[0x0000000000000020-0x0000000000000027]
RIP: 0010:bio_poll+0x9d/0x4b0
Call Trace:
iocb_bio_iopoll+0x5b/0x80
io_uring_classic_poll+0xf3/0x140
io_do_iopoll+0x4e3/0xc00
io_iopoll_check+0x275/0x560
__do_sys_io_uring_enter+0x2e5/0x720
Return -EOPNOTSUPP when HIPRI is combined with user metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: set RQF_USE_SCHED when the operation is known
The cached requests are allocated for one operation but can be handed
out for another. A passthrough command has RQF_USE_SCHED cleared, so
using those flags for a subsequent read/write bio will insert it into
the scheduler without ->prepare_request() and frees it without
->finish_request(). For kyber, this leaks the domain token acquired at
dispatch and stalls the queue.
Don't set RQF_USE_SCHED based on the first operation the batch happened
to be allocated for. Instead, set it after the request is claimed by an
operation. Introduce a helper function, blk_mq_rq_late_init() for this,
and absorb blk_mq_rq_time_init() since the two run together. |
