| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Magic Link authentication flow accepts multiple invalid authentication requests without adequate rate limiting or resource control, leading to uncontrolled memory usage growth.
This vulnerability can result in a denial-of-service condition, causing service unavailability for deployments that utilize the Magic Link authenticator. The impact is limited to these specific deployments and requires repeated invalid authentication attempts to trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler
The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function
allocates memory for the device path using kobject_get_path(). If the
length of the device path exceeds the output buffer length, the function
returns -ENOSPC but does not free the allocated memory, resulting in a
memory leak.
Add a kfree() call to the error path to ensure the allocated memory is
properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: fix memory leak in raid1_run()
raid1_run() calls setup_conf() which registers a thread via
md_register_thread(). If raid1_set_limits() fails, the previously
registered thread is not unregistered, resulting in a memory leak
of the md_thread structure and the thread resource itself.
Add md_unregister_thread() to the error path to properly cleanup
the thread, which aligns with the error handling logic of other paths
in this function.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix memory leak in amdxdna_ubuf_map
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail. |
| Unspecified vulnerability in IBM Java 8 before SR1 allows remote attackers to cause a denial of service via unknown vectors related to SSL/TLS and the Secure Socket Extension provider. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Security). Supported versions that are affected are Oracle Java SE: 8u341, 8u345-perf, 11.0.16.1; Oracle GraalVM Enterprise Edition: 20.3.7, 21.3.3 and 22.2.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L). |
| Vulnerability in the Oracle Java SE, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Hotspot). Supported versions that are affected are Oracle Java SE: 7u343, 8u333, 11.0.15.1, 17.0.3.1, 18.0.1.1; Oracle GraalVM Enterprise Edition: 20.3.6, 21.3.2 and 22.1.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized read access to a subset of Oracle Java SE, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability can also be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N). |
| .NET Core and Visual Studio Denial of Service Vulnerability |
| .NET and Visual Studio Denial of Service Vulnerability |
| .NET and Visual Studio Denial of Service Vulnerability |
| Uncontrolled Resource Consumption vulnerability in benoitc hackney allows Flooding. The SOCKS5 transport in src/hackney_socks5.erl correctly applies the caller-supplied timeout to the SOCKS5 negotiation phase, but then upgrades the connection to TLS using the two-argument form ssl:connect/2, which defaults to an infinite timeout. The Timeout value is in scope at the call site but is not forwarded. A hostile SOCKS5 proxy that completes the SOCKS5 handshake normally and then goes silent (or sends a partial TLS ServerHello and stalls) will cause the connecting process to block indefinitely, regardless of the connect_timeout or recv_timeout options supplied by the caller.
This issue affects hackney: from 0.10.0 before 4.0.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in benoitc hackney allows Flooding. The WebSocket client in src/hackney_ws.erl imposes no upper bound on memory consumption in three code paths. First, read_handshake_response/3 accumulates received bytes into a growing buffer with no size cap; the per-receive timeout resets on every chunk, so a server that streams bytes without ever sending \r\n\r\n causes the buffer to grow until memory is exhausted. Second, parse_payload/9 and parse_active_payload/8 do not validate the declared frame payload length against any limit; because RFC 6455 allows payload lengths up to 2^63-1 bytes, a server that announces a very large frame and dribbles bytes causes the accumulation buffer to grow until OOM. Third, the frag_buffer field in #ws_data{} accumulates continuation frames indefinitely; a server that sends an endless stream of non-final (nofin) fragmented frames without ever sending a final (fin) frame grows frag_buffer without bound.
In all three cases the attacker only needs to control the WebSocket server the hackney client connects to, with no authentication or special client configuration required.
This issue affects hackney: from 2.0.0 before 4.0.1. |
| Allocation of Resources Without Limits or Throttling vulnerability in benoitc hackney allows Flooding. hackney_h3:await_response_loop/6 accumulates the HTTP/3 response body in memory without any size cap. The after Timeout clause is a per-message inactivity timer that resets on every received chunk, housekeeping message, or settings frame — it is not a wall-clock deadline. A malicious HTTP/3 server that emits one small chunk every Timeout - 1 ms with Fin = false and never sends a final frame keeps the loop alive indefinitely while the accumulation buffer grows linearly without bound, eventually exhausting the BEAM process heap and causing an out-of-memory condition.
This issue affects hackney: from 2.0.0 before 4.0.1. |
| IBM HTTP Server 8.5, and 9.0 is vulnerable to denial of service in configurations where an attacker has write access to parts of the server configuration. |
| The Appointment Booking Calendar — Simply Schedule Appointments Booking Plugin plugin for WordPress is vulnerable to denial of service in all versions up to, and including, 1.6.11.5. This is due to a publicly accessible REST API endpoint (/wp-json/ssa/v1/async) that calls PHP's sleep() function on a user-supplied delay parameter without any rate limiting. This makes it possible for unauthenticated attackers to exhaust PHP worker processes, denying access to the site to legitimate users. |
| Uncontrolled Resource Consumption vulnerability in oban-bg oban_web ('Elixir.Oban.Web.CronExpr' modules) allows memory exhaustion via unbounded cron range expansion.
An attacker with access to schedule cron jobs can submit a malicious cron expression such as "0 0 1-100000000 * *". When a user with dashboard access views the cron job list, 'Elixir.Oban.Web.CronExpr':describe/1 is called to render the expression. parse_range/1 parses both range endpoints via Integer.parse/1 with no bounds check, and the downstream helpers expand_dom_parts/1 and expand_dow_parts/1 materialise the range eagerly via Enum.to_list/1, causing allocation of ~2.4 GB and stalling or crashing the BEAM node. A sibling helper extract_dom_values already validates range bounds, but the expansion helpers do not.
This issue affects oban_web: from 2.12.0 before 2.12.5. |
| Microsoft Defender Denial of Service Vulnerability |
| Insufficient Validation of Autoprimary SOA Queries |
| A security flaw has been discovered in GPAC up to 2.4.0. Affected is the function MergeFragment of the file src/isomedia/isom_intern.c of the component MP4Box. The manipulation results in null pointer dereference. The attack needs to be approached locally. The exploit has been released to the public and may be used for attacks. The patch is identified as 525bf1af642c30af04e4df5345e6d798c0a4d8a1. It is advisable to implement a patch to correct this issue. |
