| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/fwctl: Fix __fortify_panic
Fix a runtime assertion in cxlctl_get_supported_features(). Fortify
complains that it is potentially overflowing the entries array per
__counted_by_le(num_entries). Quiet the false positive by initializing
@num_entries earlier.
memcpy: detected buffer overflow: 48 byte write of buffer size 0
WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#7: fwctl/1398
RIP: 0010:__fortify_report+0x50/0xa0
Call Trace:
__fortify_panic+0xd/0xf
cxlctl_get_supported_features.cold+0x23/0x35 [cxl_core] |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Reference count incoming FLB data
Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so
that the FLB structure cannot be freed while the caller is actively using
it. Add an additional liveupdate_flb_put_incoming() function so the
caller can explicitly indicate when it is done using the FLB data.
During a Live Update, a subsystem might need to hold onto the incoming
File-Lifecycle-Bound (FLB) data for an extended period, such as during
device enumeration. Incrementing the reference count guarantees that the
data remains valid and accessible until the subsystem releases it,
preventing future use-after-free bugs. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix warning in poll cq direct mode
CQs allocated by ib_alloc_cq() always have a comp_handler. Though
in direct mode this handler is never expected to be called, it
is still called when the driver is reset, triggering the following
WARN_ONCE():
Call trace:
ib_cq_completion_direct+0x38/0x60
hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2]
hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2]
hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2]
hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2]
hclge_notify_roce_client+0x60/0xbc [hclge]
hclge_reset_rebuild+0x48/0x34c [hclge]
hclge_reset_subtask+0xcc/0xec [hclge]
hclge_reset_service_task+0x80/0x160 [hclge]
hclge_service_task+0x50/0x80 (hclge]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Fix race condition in event registration
The zynqmp_power driver registers handlers for suspend and subsystem
restart events using register_event(). However, the work structures
(zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by
these handlers were allocated and initialized after the registration
call.
This created a race window where, if the firmware triggered an event
immediately after registration but before allocation, the callback
(suspend_event_callback or subsystem_restart_event_callback) would
dereference a NULL pointer in work_pending(), leading to a crash.
Fix this by allocating and initializing the work structures before
registering the events. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable xfrm_decode_session hook attachment
BPF LSM programs can currently attach to xfrm_decode_session(). That
hook may return an error, but security_skb_classify_flow() calls it
from a void path and triggers BUG_ON() if an error is returned.
Disable BPF attachment to the hook to prevent a BPF LSM program from
turning packet classification into a full panic. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - add response length checks
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL
dsm_create() initially checks pdev->bus when computing segment_id:
u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0;
But the next two lines unconditionally dereference pdev->bus via
pcie_find_root_port() and especially pci_dev_id(pdev), which expands
to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact
NULL, segment_id is initialised to 0 but the very next statement
crashes the kernel.
smatch flags this:
drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we
previously assumed 'pdev->bus' could be null (see line 251)
Make the NULL handling consistent: if pdev->bus is NULL the device
has no PCI context to work with and SEV TIO setup cannot proceed,
so return -ENODEV before any of the bus-dependent lookups. The
remaining initialisation now runs only on the path where pdev->bus
is known to be valid.
No change for callers where pdev->bus is non-NULL, which is the
only case where dsm_create() did meaningful work before this change. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer
The management mailbox channel cleanup helpers can be called from
error handling paths when mgmt_chann has already been destroyed.
Add NULL checks to xdna_mailbox_free_channel() and
xdna_mailbox_stop_channel() so the cleanup path safely returns instead
of dereferencing a NULL mailbox channel pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: defer reset until cmd_mutex is unlocked
vub300_cmndwork_thread() holds cmd_mutex while it sends a command and
waits for the command response. If the response wait times out,
__vub300_command_response() kills the command URBs and then synchronously
resets the USB device through usb_reset_device().
That reset path re-enters the driver through vub300_pre_reset(), which
also takes cmd_mutex. The worker therefore tries to acquire the same
mutex recursively while it is still holding it from the command path.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the real worker and timeout/reset carrier:
vub300_cmndwork_thread()
__vub300_command_response()
usb_lock_device_for_reset()
usb_reset_device()
vub300_pre_reset()
Lockdep reported the same-task recursive acquisition on cmd_mutex:
WARNING: possible recursive locking detected
... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv]
... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv]
Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv]
*** DEADLOCK ***
Return a flag from __vub300_command_response() when the timeout path needs
a device reset, then perform the reset after vub300_cmndwork_thread() has
cleared the in-flight command state and dropped cmd_mutex. The reset is
still attempted before mmc_request_done(), preserving the existing request
completion ordering while avoiding the recursive lock. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix NULL pointer dereference in initialization
The mtd_info contains a struct device, which must be linked to its
parent. Without this, the initialization of the MTD fails with a NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
It's pointless to call WARN_ON() in case of an allocation failure in
dev_change_net_namespace() and device_rename(), since it only leads to
useless splats caused by deliberate fault injections, so avoid it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/MSI: Unmap MSI-X region on error"
This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202.
Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an
iounmap(dev->msix_base) on the error path of msix_capability_init() to
release the MSI-X region when msix_setup_interrupts() fails.
When msix_setup_interrupts() fails, the call chain is:
msix_setup_interrupts()
-> __msix_setup_interrupts()
struct pci_dev *dev __free(free_msi_irqs) = __dev;
...
return ret; // __free cleanup fires on error
The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which
already handles the unmap:
void pci_free_msi_irqs(struct pci_dev *dev)
{
pci_msi_teardown_msi_irqs(dev);
if (dev->msix_base) {
iounmap(dev->msix_base); // already unmapped here
dev->msix_base = NULL; // and set to NULL
}
}
So dev->msix_base is unmapped and set to NULL before
msix_setup_interrupts() returns to msix_capability_init(). The
"goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap
MSI-X region on error") then calls iounmap() a second time on a NULL
pointer.
This was reproduced on Intel Emerald Rapids (192 CPUs) while
running tools/testing/selftests/kexec/test_kexec_jump.sh:
WARNING: CPU#44 at iounmap+0x2a/0xe0
RIP: 0010:iounmap+0x2a/0xe0
RDI: 0000000000000000
Call Trace:
msix_capability_init+0x317/0x3f0
__pci_enable_msix_range+0x21d/0x2c0
pci_alloc_irq_vectors_affinity+0xa9/0x130
nvme_setup_io_queues+0x2a8/0x420 [nvme]
nvme_reset_work+0x151/0x340 [nvme]
...
RDI=0 confirms iounmap() is called with NULL.
Restore the original "goto out_disable" and leave the unmap to the
existing __free(free_msi_irqs) cleanup. |
| Uncontrolled Recursion vulnerability in the Elixir standard library allows an attacker who controls a list passed to inspect/1, List.to_string/1, or List.to_charlist/1 to exhaust a BEAM node's memory.
Inspect.List's charlist branch in lib/elixir/lib/inspect.ex classifies a list as a charlist using List.ascii_printable?/2, which examines only the first :printable_limit (4096 by default) elements, and then calls IO.chardata_to_string/1 on the whole term. A list whose printable prefix exceeds that limit but which contains a later element that is not a code point (an atom, an out-of-range integer, or an improper tail) is therefore mis-classified, and the conversion raises ArgumentError. That conversion runs inside List.to_string/1, whose rescue clause builds its message by interpolating inspect(list), which re-enters the same branch and raises again. The nested inspection is an argument to raise, so the recursion is not in tail position and every level is retained: the process stack grows monotonically while each cycle re-walks the list, until the process is killed by max_heap_size or, by default, the node runs out of memory. List.to_charlist/1 has the same rescue shape.
Below the printable limit the inner inspect/1 sees the invalid element within its counter and renders the list in ordinary bracket form, so a single ArgumentError is raised and no recursion occurs.
This issue affects elixir: from 1.15.0-rc.0 before 1.18.5, from 1.19.0-rc.0 before 1.19.6, and from 1.20.0-rc.0 before 1.20.4. |
| An issue in the inviteController.js component in Bluewave Labs Checkmate <=3.3.0 allows remote authenticated administrators to escalate privileges to superadmin via the role parameter to the /api/v1/invite endpoint. |
| gitoxide versions from 0.25.4 contain an HTTP credential leak vulnerability in the curl-based transport backend where credentials are sent to attacker-controlled servers after HTTP redirects. The vulnerability occurs because credential validation checks the original URL instead of the effective URL after redirect, allowing attackers to steal authentication tokens through cross-domain redirects or HTTPS-to-HTTP downgrades. |
| gitoxide gix-packetline versions before 0.21.5 contain a panic vulnerability in the TextRef implementation that occurs when processing side-band packet lines with empty payloads. A malicious Git server can send a crafted side-band packet to trigger an index out of bounds panic, aborting the client process during fetch operations without authentication. |
| filebrowser through 2.63.23 fails to validate named pipes in directory archive and public download handlers, allowing attackers to trigger blocking open syscalls. Authenticated users or anonymous visitors with public share links can repeatedly request archives containing named pipes to pin server goroutines and exhaust connection resources. |
| A missing input-validation issue in MongoDB libmongocrypt's automatic-encryption context setup allows a caller-supplied database identifier to be accepted without sanitization. The resulting impact is limited to incorrect schema selection, which may lead to limited disclosure or modification of information handled by the application. |
| The wpForo Forum plugin for WordPress is vulnerable to SQL Injection via the 'referer' parameter in all versions up to, and including, 2.4.17. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| Agno up to and including 2.5.8 is vulnerable to Remote Code Execution (RCE) via prompt injection. The PythonTools and ShellTools components pass unsanitized, LLM-generated arguments directly to execution sinks including exec(), runpy.run_path(), and subprocess.run(). An unauthenticated attacker can exploit this by embedding malicious instructions in content processed by the agent (such as web pages or documents), allowing for arbitrary code and OS command execution on the host server. |
