| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When verifying a certificate chain containing excluded DNS constraints, these constraints are not correctly applied to wildcard DNS SANs which use a different case than the constraint. This only affects validation of otherwise trusted certificate chains, issued by a root CA in the VerifyOptions.Roots CertPool, or in the system certificate pool. |
| GIMP HDR File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of HDR files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28266. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, rpc_client_recv_fragment in libfreerdp/core/gateway/rpc_client.c ensures the response reassembly stream capacity using only the server-declared alloc_hint rather than the actual StubLength about to be written. A malicious TS Gateway can send a PTYPE_RESPONSE with a small alloc_hint and a much larger frag_length, causing Stream_Write to copy attacker-controlled stub data beyond the 4096-byte pdu->s buffer. This can crash the client and may permit code execution through heap corruption. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP H.264 decoder backends can return YUV planes sized from the bitstream without comparing the decoded width and height to the RDPGFX surface dimensions used to validate region rectangles. A malicious RDP server can provide an AVC420 or AVC444 bitstream whose decoded frame is smaller than the negotiated surface, causing yuv420_context_decode and the YUV-to-RGB conversion paths to read beyond the decoder-owned planes in libfreerdp/codec/h264.c and the selected H.264 backend. This can disclose client memory or crash the client. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, freerdp_dsp_decode_opus in libfreerdp/codec/dsp.c calls Stream_EnsureRemainingCapacity on context->common.buffer even though opus_decode writes decoded PCM into the caller-supplied out stream. A malicious RDP server that negotiates WAVE_FORMAT_OPUS with a client built with WITH_OPUS enabled and WITH_DSP_FFMPEG disabled can make libopus write a large decoded frame beyond the 4096-byte StreamPool_Take destination used by channels/rdpsnd/client/rdpsnd_main.c. This can corrupt the client heap, crash the client, and may permit code execution. This issue is fixed in version 3.28.0. |
| A security vulnerability has been detected in liftoff-sr CIPster 1802525be27d33e19a9a83c163e331a1d13b1892. This impacts an unknown function of the file source/src/enet_encap/encap.cc of the component TCP Encapsulation Receive Path. The manipulation leads to out-of-bounds read. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The identifier of the patch is e8e9dba09bf56962807d3504b783ccdb6287f3e4. To fix this issue, it is recommended to deploy a patch. |
| A weakness has been identified in liftoff-sr CIPster 1802525be27d33e19a9a83c163e331a1d13b1892. This affects the function CipConnMgrClass::forward_open of the file cipconnectionmanager.cc of the component ForwardOpen Handler. Executing a manipulation of the argument product_code_ can lead to out-of-bounds read. It is possible to launch the attack remotely. The exploit has been made available to the public and could be used for attacks. This patch is called ea870a274bf68dfaa3f511f20e2fff6778fb7b74. A patch should be applied to remediate this issue. |
| C12.22 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service |
| An out-of-bounds access issue was addressed with improved bounds checking. This issue is fixed in Safari 26.6, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A memory corruption issue was addressed with improved state management. This issue is fixed in Safari 26.6, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| A vulnerability in the XAR file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition or possibly other expanded impacts as a result of memory corruption on an affected device.
This vulnerability is due to improper boundary checks for content in XAR files during scanning. An attacker could exploit this vulnerability by submitting a crafted file that contains XAR content to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. |
| IBM Server Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the FSP firmware update process. An attacker with authenticated administrator-level access to the FSP can, under specific conditions, execute arbitrary code, resulting in a confidentiality, integrity, and availability impact. |
| IBM Power Systems Firmware FW1120.00, and FW1110.00 through FW1110.30 is affected by a vulnerability in the interface between the BMC and the host system. An attacker with service access to the BMC can send a specially crafted command, allowing arbitrary code to be executed on the host system, giving full control over the host system and all hosted partitions, resulting in a confidentiality, integrity, and availability impact. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, FW950.00 through FW950.H2, OP940.00 through OP940.a1 (Power9), and OP940.00 - OP940.81 (Power HMC) is affected by a vulnerability in host firmware configuration parsing. An attacker with service-level access to the BMC/FSP can supply specially crafted configuration data, compromising the host firmware boot stage and everything subsequently loaded by it, resulting in a confidentiality, integrity, and availability impact to the managed system. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the FSP management network protocol. An attacker with authenticated HMC administrator access can execute arbitrary code on the service processor, giving full control over the managed system, resulting in a confidentiality, integrity, and availability impact. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP clients that negotiate RDPGFX AVC444 with an H.264 decoder backend calculate the intermediate YUV444 allocation size in libfreerdp/codec/h264.c with 32-bit multiplication in avc444_ensure_buffer. A malicious RDP server can supply surface dimensions for which piDstStride multiplied by padDstHeight wraps to a small nonzero value, causing winpr_aligned_recalloc to allocate an undersized buffer before YUV420CombineToYUV444 writes using the actual stride and rectangle dimensions. This can cause a client crash and may permit code execution through attacker-influenced heap corruption. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, the glyph_cache_get function in libfreerdp/cache/glyph.c checks whether index is greater than cache->number instead of greater than or equal to it. A malicious RDP server can use GLYPH_FRAGMENT_USE replay in update_process_glyph_fragments to make the default cache receive index 254 when cache->number is 254, reading one pointer beyond the entries array and dereferencing it as a glyph. This can crash the client and may disclose adjacent heap data. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP clients using TS Gateway accept a server-controlled max_xmit_frag value in libfreerdp/core/gateway/rpc_bind.c without bounding it to the 4088-byte ReceiveFragment allocation. A malicious gateway can advertise 65535 and then send a response fragment of the same length, causing rpc_channel_read in libfreerdp/core/gateway/rpc.c to write up to 65535 bytes into the smaller ReceiveFragment buffer. This can crash the client and may permit code execution through attacker-controlled heap corruption. This issue is fixed in version 3.27.0. |
| Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, and FW1060.00 through FW1060.80 is affected by a vulnerability in the host firmware boot process image validation path. An attacker with service access to the service processor can supply a maliciously crafted code update image, allowing arbitrary code to be executed on the host system. Successful exploitation could result in a confidentiality, integrity, and availability impact to the affected host system. |
