| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix integer overflow in ftp helper port/address parsing
ip_vs_ftp_get_addrport() accumulates decimal digits into a __u16
(hport) and into unsigned char (p[]) without checking for overflow.
A crafted FTP PASV/EPSV response with an over-long port or address
octet wraps the value, so the helper configures the data connection
with a truncated port/address.
The netfilter conntrack FTP helper had the same defect, fixed in
commit 2b413fc689ba ("netfilter: nf_conntrack_ftp: avoid u16
overflows"). Apply the equivalent fix here: widen the port accumulator
to u32 and reject values above 65535, and reject address octets above
255. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing qp->sq.offset in
_create_user_qp() before set_user_buf_size() is reached. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject out-of-range evcn in mi_enum_attr()
In mi_enum_attr(), the start/end VCN validation for non-resident
attributes is:
if (svcn > evcn + 1) goto out;
When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn
passes the check. For evcn values close to U64_MAX (but not equal to it)
the right-hand side is still a meaningless near-wrap upper bound, so a
malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass
mi_enum_attr() unrejected.
VCN (virtual cluster number) is a cluster index, so any valid evcn is
bounded by the volume's total cluster count, which ntfs3 holds in
sbi->used.bitmap.nbits (set up in ntfs_init_from_boot() before any caller
of mi_enum_attr() runs). Reject evcn values that fall outside this range.
However, an empty non-resident attribute (no allocated clusters) is
legitimately encoded with svcn == 0 and evcn == -1 (U64_MAX), e.g. via
attr->nres.evcn = cpu_to_le64((u64)vcn - 1) with vcn == 0. That sentinel
must keep passing, so exclude evcn == U64_MAX from the range check. The
existing "svcn > evcn + 1" test still tolerates the sentinel ("0 > 0" is
false) and continues to require svcn == 0 for it, while the range check
rejects every other out-of-range evcn and thereby also defuses the
"evcn + 1" wraparound.
svcn does not need its own bound: once evcn < nbits, "svcn > evcn + 1"
implies svcn <= nbits.
[almaz.alexandrovich@paragon-software.com: fixed evcn check] |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check block offset is not negative
If a negative offset is read off disk (for example the offset into the
decompressed fragment block), this will cause squashfs_copy_data() to
perform an out of bounds access.
Fix by checking if offset is negative, and returning 0. This matches
existing behaviour where an offset beyond the block returns 0 bytes
copied.
To trigger this out of bounds access requires a crafted Squashfs
filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be
able to mount such a filesystem, but once mounted, an unprivileged user
can trigger the out of bounds access by reading the crafted file with the
negative offset. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max
check_kfunc_args() detects a kfunc argument named rdonly_buf_size or
rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64,
and does not bound it. check_kfunc_call() later copies that value into
the returned register's mem_size field:
meta->r0_size = reg->var_off.value;
...
regs[BPF_REG_0].mem_size = meta.r0_size;
regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set
gets truncated instead of causing a load-time rejection, so the verifier
records a PTR_TO_MEM register with an approximately 4 GiB mem_size for
whatever allocation the kfunc returned. A later access check against
that register uses the truncated, wrong bound.
Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the
point meta->r0_size is set. |
| A vulnerability was found in Freedesktop Poppler 26.07.0. The impacted element is the function JBIG2Stream::readCodeTableSeg of the file poppler/JBIG2Stream.cc. Performing a manipulation results in integer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The patch is named eb87cf711563894649bd0c365baa479401dc6d51. To fix this issue, it is recommended to deploy a patch. |
| An integer overflow or wraparound vulnerability in File Operation in Synology DiskStation Manager (DSM) before 7.2.1-69057-10, 7.2.2-72806-7 and 7.3.2-86009-2 allows remote authenticated users to conduct limited denial-of-service attacks. |
| Integer overflow in µD3TN v0.15.0 TCPCLv3 handshake causes heap overflow, allowing remote attackers to reliably cause DoS |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: kyro: Validate overlay viewport coordinates
The overlay viewport end coordinates are computed from the viewport
origin and dimensions using 32-bit unsigned arithmetic. Large input
values can cause these calculations to wrap around before the resulting
coordinates are passed to SetOverlayViewPort().
SetOverlayViewPort() packs the viewport coordinates into 16-bit
register fields. The X coordinates are additionally adjusted by +2
and +1 before being written. Validate the coordinate calculations
for 32-bit wraparound and ensure that the adjusted coordinates fit
within their 16-bit register fields before calling
SetOverlayViewPort().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Add vm_bind region with kbo range overlap check
When a VM is created, caller has to specify the range of the address space
carve-out set aside for mapping kernel BO's. That means vm_bind mappings of
UM-exposed BO's should not intersect with that region, but at the moment
we're not checking this.
At first, I thought of giving these values to drm_gpuvm_init() through its
reserve_{offset, range} arguments, but it turns out that is meant for VM
address spans that are not managed through the usual drm_gpuvm split/merge
circuit, so storing the end of the user VA range at VM creation time and
doing a quick check in the vm_bind ioctl path was the simplest workaround.
The new check also makes sure vm_bind range doesn't overflow the size of a
64-bit unsigned integer. That was already being done further down the call
stack inside drm_gpuvm_sm_map -> drm_gpuvm_range_valid, but it's best to
fail early in the driver before GPUVM functions are invoked so that we
won't waste time allocating vm_bind context resources. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs
The loop counter 'count' was declared as u8 while num_pc is u32.
If firmware advertises more than 255 PC entries the counter wraps
back to zero and the loop never terminates potentially causing an
infinite loop or reading past the allocated pc_data array.
Change the declaration to u32 to match num_pc. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
Make sure we don't end-up with a num_frags = 0 situation.
For that, check that the required size is not 0 and put a checker on
num_frags as well. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
table->offset[i] is a u32 from firmware, but was stored into a signed
int. A crafted offset like 0xFFFFFFF0 becomes -16, placing hdr 16 bytes
before the table buffer. The subsequent avail check was bypassed
because the negative int was promoted to a large size_t in the
expression "table_sz - offset - sizeof(*hdr)", yielding a large positive
avail and letting the out-of-bounds hdr->type read proceed undetected.
Store the offset as u32 and validate it with unsigned comparisons before
any pointer arithmetic. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: refactor the two workqueues and init sequence
Multiple issues have been found within the hid-asus driver:
- unchecked size in asus_raw_event()
- unclean teardown of asus_probe on failure
- possible use-after-free in asus_probe
- multiple workqueue used for jobs where one was enough
- sleeping calls in atomic context
- packets of incorrect size being sent to the keyboard controller
Join the two workqueues into one reusing the stopping mechanism
of the brightness workqueue, use the joined workqueue to also
move the asus_wmi_send_event() sleeping call away from atomic
context and add a size check in asus_raw_event(). |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix integer overflow in verify_tags() bounds check
verify_tags() validates the tagset table unpacked from a policy blob.
For each set it reads a count and checks that advancing the index by
that count stays inside sets.table[]:
u32 cnt = tags->sets.table[i];
if (i+cnt >= tags->sets.size) {
i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32.
sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so
every entry is a raw unbounded 32-bit word taken from the policy blob,
and verify_tags() is the function that is supposed to validate it. A
count close to U32_MAX makes the sum wrap to a small value, the guard
passes, and the inner loop then walks sets.table[++i] past the end of
the kcalloc(size, sizeof(u32)) allocation.
Note that sets.size is bounded by 65535, because unpack_tagsets() reads
it with aa_unpack_array() as a u16, so the wrap cannot be reached by
growing the table; it is reached purely through the attacker-supplied
count.
With sets.size = 2 and sets.table = { 0, 0xffffffff }:
i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run
i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is
false, so the guard is bypassed and the inner loop reads
sets.table[2] -- one element past a two element allocation
The walk continues until an out-of-bounds value happens to be >=
hdrs.size or the access faults, so a crafted policy yields an
out-of-bounds read on the policy load path
(aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags ->
verify_tags). unpack_tags() runs before the perms and DFA tables are
unpacked, so no other table needs to be well formed to reach it.
Policy load is gated by aa_may_manage_policy(), which checks
CAP_MAC_ADMIN relative to the subject's own user namespace rather than
the init user namespace, so with the default
unprivileged_userns_apparmor_policy=1 the path is reachable from an
unprivileged task in a matched-level nested namespace, not only by a
globally privileged one.
Perform the addition in u64 so that it cannot wrap, restoring the
intended i + cnt < sets.size guarantee. |
| rabbitmq-c is a C-language AMQP client library for RabbitMQ. Prior to 0.16.0, a malicious AMQP server can send an undersized HEADER or METHOD frame during client login and cause unsigned size_t underflow in amqp_handle_input() in librabbitmq/amqp_connection.c. The parser subtracts HEADER_SIZE, fixed per-frame fields, and FOOTER_SIZE from state->target_size without first checking the minimum frame length. The wrapped encoded.len value is passed through amqp_decode_properties() to amqp_decode_table_internal(), where it defeats bounds checks and causes an out-of-bounds read and process crash. An on-path attacker can also trigger the issue when AMQP traffic is not protected by TLS with certificate validation. The demonstrated impact is denial of service, with no reliable memory disclosure or code execution shown. This issue is fixed in version 0.16.0. |
| Imager versions before 1.036 for Perl exit the process reading a TGA with a colour map length of 32768 or more in tga_palette_read.
The reader unpacks the two-byte colour map length into a signed short, so a length of 32768 or more becomes negative. tga_palette_read() casts that value to size_t and asks mymalloc() for a size near SIZE_MAX. The allocation fails and Imager's allocator calls exit(3).
Reading an attacker-supplied file through Imager->read() triggers an uncatchable exit. |
