| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Fix vaddr leak when indirect CSD has zeroed workgroups
v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect
buffer and the workgroup buffer and is expected to release them before
returning. When any of the workgroup counts read from the buffer is zero,
the function bailed out early and skipped the cleanup, leaking the vaddr
mappings of both BOs.
Jump to the cleanup path instead of returning directly, so the mappings
are always dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: restore reservation on error in hugetlb folio copy paths
Two sites in mm/hugetlb.c allocate a hugetlb folio via
alloc_hugetlb_folio() (consuming a VMA reservation) and then call
copy_user_large_folio(), which became int-returning in commit 1cb9dc4b475c
("mm: hwpoison: support recovery from HugePage copy-on-write faults") and
can now fail (e.g. -EHWPOISON on a hwpoisoned source page). On the
failure path, folio_put() restores the global hugetlb pool count through
free_huge_folio(), but the per-VMA reservation map entry is left marked
consumed:
- hugetlb_mfill_atomic_pte() resubmission path (UFFDIO_COPY)
- copy_hugetlb_page_range() fork-time CoW path when
hugetlb_try_dup_anon_rmap() fails (rare: pinned hugetlb anon
folio under fork)
User-visible effect: on UFFDIO_COPY into a private hugetlb VMA where the
resubmission copy fails, the reservation for that address is leaked from
the VMA's reserve map. A subsequent fault at the same address takes the
no-reservation path, and under hugetlb pool pressure the task is SIGBUSed
at an address it had previously reserved. The fork-time CoW path leaks
the same way in the child VMA's reserve map, though it requires the much
rarer combination of pinned hugetlb anon page + hwpoisoned source.
Add the missing restore_reserve_on_error() call before folio_put() on both
error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Do not try to iommu_map a 0 length region in swiotlb
iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three
parts, the head, middle and trailer. If the middle is empty because there
are no aligned pages it will call down to iommu_map() with a 0 size
which the iommupt implementation will fail as illegal.
It then tries to do an error unwind and starts from the wrong spot
corrupting the mapping so the eventual destruction triggers a WARN_ON.
Check for 0 length and avoid mapping and use offset not 0 as the starting
point to unlink.
This is frequently triggered by using some kinds of thunderbolt NVMe
drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to
pass in oddly aligned buffers for the passthrough commands from smartctl
that hit this condition. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: reject fuse_notify() pagecache ops on directories
The operations FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE allow the
FUSE daemon to actively write/read pagecache contents.
For directories with FOPEN_CACHE_DIR, the pagecache is used as
kernel-internal cache storage, and userspace is not supposed to have
direct access to this cache - in particular, fuse_parse_cache() will hit
WARN_ON() if the cache contains bogus data.
Reject FUSE_NOTIFY_STORE and FUSE_NOTIFY_RETRIEVE on anything other than
regular files with -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
rseq: Fix using an uninitialized stack variable in rseq_exit_user_update()
There is an bug in which an uninitialized stack variable is used in
rseq_exit_user_update() as reported by syzbot:
BUG: KMSAN: kernel-infoleak in rseq_set_ids_get_csaddr include/linux/rseq_entry.h:502 [inline]
The local variable:
struct rseq_ids ids = {
.cpu_id = task_cpu(t),
.mm_cid = task_mm_cid(t),
.node_id = cpu_to_node(ids.cpu_id),
};
According to the C standard, the evaluation order of expressions in an
initializer list is indeterminately sequenced. The compiler (Clang, in
this KMSAN build) evaluates `cpu_to_node(ids.cpu_id)` *before*
`ids.cpu_id` is initialized with `task_cpu(t)`.
This is fixed by moving the assignment of ids.node_id outside the
structure initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache metadata: fix memory leak on metadata abort retry
When failing to acquire the root_lock in dm_cache_metadata_abort because
the block_manager is read-only, the temporary block_manager created
outside the root_lock is not properly released, causing a memory leak.
Reproduce steps:
This can be reproduced by reloading a new table while the metadata
is read-only. While the second call to dm_cache_metadata_abort is
caused by lack of support for table preload in dm-cache, mentioned
in commit 9b1cc9f251af ("dm cache: share cache-metadata object across
inactive and active DM tables"), it exposes the memory leak in
dm_cache_metadata_abort when the function is called multiple times.
Specifically, dm-cache fails to sync the new cache object's mode during
preresume, creating the reproducer condition.
This issue could also occur through concurrent metadata_operation_failed
calls due to races in cache mode updates, but the table preload scenario
below provides a reliable reproducer.
1. Create a cache device with some faulty trailing metadata blocks
dmsetup create cmeta <<EOF
0 200 linear /dev/sdc 0
200 7992 error
EOF
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0"
2. Suspend and resume the cache to start a new metadata transaction and
trigger metadata io errors on the next metadata commit.
dmsetup suspend cache
dmsetup resume cache
3. Write to the cache device to update metadata
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --size 64k
4. Preload the same table
dmsetup reload cache --table "$(dmsetup table cache)"
5. Resume the new table. This triggers the memory leak.
dmsetup suspend cache
dmsetup resume cache
kmemleak logs:
<snip>
unreferenced object 0xffff8880080c2010 (size 16):
comm "dmsetup", pid 132, jiffies 4294982580
hex dump (first 16 bytes):
00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ...
backtrace (crc 3118f31c):
kmemleak_alloc+0x28/0x40
__kmalloc_cache_noprof+0x3d9/0x510
dm_block_manager_create+0x51/0x140
dm_cache_metadata_abort+0x85/0x320
metadata_operation_failed+0x103/0x1e0
cache_preresume+0xacd/0xe70
dm_table_resume_targets+0xd3/0x320
__dm_resume+0x1b/0xf0
dm_resume+0x127/0x170
<snip> |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory-failure: fix hugetlb_lock AA deadlock in get_huge_page_for_hwpoison
Two concurrent madvise(MADV_HWPOISON) calls on the same hugetlb page can
trigger a recursive spinlock self-deadlock (AA deadlock) on hugetlb_lock
when racing with a concurrent unmap:
thread#0 thread#1
-------- --------
madvise(folio, MADV_HWPOISON)
-> poisons the folio successfully
madvise(folio, MADV_HWPOISON) unmap(folio)
try_memory_failure_hugetlb
get_huge_page_for_hwpoison
spin_lock_irq(&hugetlb_lock) <- held
__get_huge_page_for_hwpoison
hugetlb_update_hwpoison()
-> MF_HUGETLB_FOLIO_PRE_POISONED
goto out:
folio_put()
refcount: 1 -> 0
free_huge_folio()
spin_lock_irqsave(&hugetlb_lock)
-> AA DEADLOCK!
The out: path in __get_huge_page_for_hwpoison() calls folio_put() to drop
the GUP reference while the hugetlb_lock is still held by the hugetlb.c
wrapper get_huge_page_for_hwpoison(). If concurrent unmap has released
the page table mapping reference, folio_put() drops the folio refcount to
zero, triggering free_huge_folio() which attempts to re-acquire the
non-recursive hugetlb_lock.
Fix this by moving hugetlb_lock acquisition from the hugetlb.c wrapper
into get_huge_page_for_hwpoison(). Place spin_unlock_irq() before the
folio_put() at the out: label so the folio is always released outside the
lock.
[akpm@linux-foundation.org: fix race, rename label per Miaohe] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
NFT_META_BRI_IIFHWADDR declares its destination register with
len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to
two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does
memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and
leaving the upper 2 bytes of the second register as uninitialised
nft_do_chain() stack. A downstream load of that register span leaks
those stale bytes to userspace.
Zero the second register before the memcpy so the full declared span is
written. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Reject zero-length property entries in validator
tb_property_entry_valid() accepts entries with length == 0 for
DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes
validation but causes an underflow in the null-termination logic:
property->value.text[property->length * 4 - 1] = '\0';
When property->length is 0 this writes to offset -1 relative to
the allocation.
Reject zero-length entries early in the validator since they have no
valid representation in the XDomain property protocol. |
| In the Linux kernel, the following vulnerability has been resolved:
6lowpan: fix off-by-one in multicast context address compression
The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses
&data[1] as destination and &ipaddr->s6_addr[11] as source, but
both should be offset by one: &data[2] and &ipaddr->s6_addr[12]
respectively.
This off-by-one has two consequences:
1. data[1] is overwritten with s6_addr[11], corrupting the RIID
field in the compressed multicast address
2. data[5] is never written, so uninitialized kernel stack memory
is transmitted over the network via lowpan_push_hc_data(),
leaking kernel stack contents
The correct inline data layout must match what the decompression
function lowpan_uncompress_multicast_ctx_daddr() expects:
data[0..1] = s6_addr[1..2] (flags/scope + RIID)
data[2..5] = s6_addr[12..15] (group ID)
Also zero-initialize the data array as a defensive measure against
similar bugs in the future. |
| OS Command Injection vulnerability in Rapid7 InsightConnect RPM Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the repo, key, or name parameters due to insufficient input sanitization in shell command construction. |
| OS Command Injection vulnerability in Rapid7 InsightConnect SQLmap Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the api_host or api_port parameters during connection configuration due to insufficient input validation. |
| OS Command Injection vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to execute arbitrary OS commands via the expression parameter due to insufficient input validation. |
| Arbitrary File Write vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to write attacker-controlled content to arbitrary file paths via the expression parameter. |
| Arbitrary File Read vulnerability in Rapid7 InsightConnect Sed Plugin on Linux allows authenticated attackers to read arbitrary files via the expression parameter due to insufficient input validation. |
| OS Command Injection vulnerability in the ping action of Rapid7 InsightConnect Ping Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host parameter due to insufficient input validation when constructing shell commands. |
| OS Command Injection vulnerability in the TR action of Rapid7 InsightConnect Translate Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to insufficient input sanitization in shell command construction. |
| OS Command Injection vulnerability in the process_string action of Rapid7 InsightConnect AWK Plugin on Linux allows remote attackers to execute arbitrary OS commands via the text or expression parameters due to unsafe shell command construction in the processing pipeline. |
| OS Command Injection vulnerability in the traceroute action of Rapid7 InsightConnect Traceroute Plugin on Linux allows remote attackers to execute arbitrary OS commands via the host, port, max_ttl, count, or time_out request parameters due to insufficient input validation when constructing shell commands. |
| Path Traversal vulnerability in the create_archive function of Rapid7 InsightConnect Compression Plugin on Linux allows authenticated attackers to write to unintended file paths via crafted filename input. The impact is limited to file corruption as content cannot be controlled by the attacker. |
