| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| libexpat before 2.8.2 has an integer overflow in doProlog that is related to storeEntityValue and entity textLen. |
| A flaw was found in QEMU. When reading input audio in the virtio-snd device input callback, the `virtio_snd_pcm_in_cb` function did not check whether the iov could fit the data buffer, potentially leading to a heap out-of-bounds write. This issue exists due to an incomplete fix for CVE-2024-7730. |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, an integer overflow in ht_undo_impl() in src/lib/OpenEXRCore/internal_ht.cpp leads to a heap-buffer overflow when decoding a crafted HTJ2K-compressed EXR file. decode->channels[i].width (int32_t) is multiplied by bytes_per_element in 32-bit signed arithmetic. With large widths (e.g., >= 536870912 for FLOAT data), this overflows, producing a corrupted offset that is later used for pointer arithmetic and can cause a heap out-of-bounds write. The same unchecked multiplication pattern appears in two other HTJ2K paths (bytes-per-line accumulation and pixel-line pointer advancement). As with related CVE-2026-34378 through CVE-2026-34589 fixes in other codecs, validating only after the multiplication is too late because the value may already be overflowed. This issue has been fixed in version 3.4.12. |
| In libexpat before 2.8.2, there is a heap-based buffer overflow in doProlog in xmlparse.c because scaffold backing array reallocation is mishandled when there is data-structure sharing across parsers. |
| js-toml is a TOML parser for JavaScript, fully compliant with the TOML 1.0.0 Spec. Versions up to and including 1.1.0 parse hexadecimal / octal / binary integer literals via a hand-written `parseBigInt` loop that multiplies a `BigInt` accumulator by the radix once per input digit. Each iteration performs a `BigInt * BigInt` operation on an accumulator that grows linearly with the number of digits already consumed, so the whole loop is O(n²) in the literal length. The lexer regex places no upper bound on the literal length, so a single TOML document containing one ~500 kB hex literal pins one CPU core for ~40 seconds on a modern laptop (Apple M-series, Node v22). Memory amplification is bounded but CPU amplification is severe and grows quadratically: doubling the literal length quadruples the work. A caller that invokes `load()` on attacker-controlled TOML (configuration upload endpoints, CI/CD systems ingesting third-party `*.toml`, IDE plugins, build tools) is exposed to a single-request CPU exhaustion DoS. Version 1.1.1 fixes the issue. |
| A vulnerability was identified in BerriAI litellm up to 1.82.2. This affects an unknown function of the file litellm/proxy/auth/user_api_key_auth.py of the component M2M JWT Handler. Such manipulation leads to improper authorization. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is reported as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. |
| ImageMagick before 7.1.2-15 (and 6.x before 6.9.13-40) contains a heap out-of-bounds read in the PCD coder's DecodeImage loop. A crafted PCD file can trigger a one-byte heap out-of-bounds read during image decoding, resulting in denial of service and potential disclosure of an adjacent heap byte. |
| Improper escaping of database table names in the CaptureChangeMySQL Processor included with Apache NiFi 1.2.0 through 2.9.0 allows for injecting SQL commands using crafted naming. Manual quoted boundaries added in Apache NiFi 1.8.0 narrowed the scope of potential injection options, but did not cover additional strategies. Apache NiFi installations that do not use the CaptureChangeMySQL Processor are not subject to this vulnerability. Upgrading to Apache NiFi 2.10.0 is the recommended mitigation, which incorporates more robust identifier escaping. |
| ImageMagick before 7.1.2-15 and 6.9.x before 6.9.13-40 contains an integer overflow in the PSB (PSD v2) RLE decoding path (ReadPSDChannelRLE in coders/psd.c) that causes a heap out-of-bounds read on 32-bit builds. Processing a crafted PSB file can lead to information disclosure or a crash. |
| Incorrect calculation of buffer size in Windows VMSwitch allows an authorized attacker to deny service locally. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: don't merge zcopy skbs
skb_gro_receive() can currently copy frags between the source and GRO
skb, without checking the zerocopy status, and in particular the
SKBFL_MANAGED_FRAG_REFS flag.
When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference
on the pages in shinfo->frags. Appending those frags to another skb's
frags without fixing up the page refcount can lead to UAF.
When either the last skb in the GRO chain (the one we would append
frags to) or the source skb is zerocopy, don't merge the skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: cadence-quadspi: fix unclocked access on unbind
Make sure that the controller is runtime resumed before disabling it
during driver unbind to avoid an unclocked register access.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: Avoid OOB font access if console rotation fails
Clear the font buffer if the reallocation during console rotation fails
in fbcon_rotate_font(). The putcs implementations for the rotated buffer
will return early in this case. See [1] for an example.
Currently, fbcon_rotate_font() keeps the old buffer, which is too small
for the rotated font. Printing to the rotated console with a high-enough
character code will overflow the font buffer.
v2:
- fix typos in commit message |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: spi-nor: debugfs: fix out-of-bounds read in spi_nor_params_show()
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix uninit-value by validating catalog record size
Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The
root cause is that hfs_brec_read() doesn't validate that the on-disk
record size matches the expected size for the record type being read.
When mounting a corrupted filesystem, hfs_brec_read() may read less data
than expected. For example, when reading a catalog thread record, the
debug output showed:
HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26
HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ!
hfs_brec_read() only validates that entrylength is not greater than the
buffer size, but doesn't check if it's less than expected. It successfully
reads 26 bytes into a 520-byte structure and returns success, leaving 494
bytes uninitialized.
This uninitialized data in tmp.thread.nodeName then gets copied by
hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering
the KMSAN warning when the uninitialized bytes are used as array indices
in case_fold().
Fix by introducing hfsplus_brec_read_cat() wrapper that:
1. Calls hfs_brec_read() to read the data
2. Validates the record size based on the type field:
- Fixed size for folder and file records
- Variable size for thread records (depends on string length)
3. Returns -EIO if size doesn't match expected
For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading
nodeName.length to avoid reading uninitialized data at call sites that
don't zero-initialize the entry structure.
Also initialize the tmp variable in hfsplus_find_cat() as defensive
programming to ensure no uninitialized data even if validation is
bypassed. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix double free in create_space_info_sub_group() error path
When kobject_init_and_add() fails, the call chain is:
create_space_info_sub_group()
-> btrfs_sysfs_add_space_info_type()
-> kobject_init_and_add()
-> failure
-> kobject_put(&sub_group->kobj)
-> space_info_release()
-> kfree(sub_group)
Then control returns to create_space_info_sub_group(), where:
btrfs_sysfs_add_space_info_type() returns error
-> kfree(sub_group)
Thus, sub_group is freed twice.
Keep parent->sub_group[index] = NULL for the failure path, but after
btrfs_sysfs_add_space_info_type() has called kobject_put(), let the
kobject release callback handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-thin: fix metadata refcount underflow
There's a bug in dm-thin in the function rebalance_children. If the
internal btree node has one entry, the code tries to copy all btree
entries from the node's child to the node itself and then decrement the
child's reference count.
If the child node is shared (it has reference count > 1), we won't free
it, so there would be two pointers to each of the grandchildren nodes.
But the reference counts of the grandchildren is not increased, thus the
reference count doesn't match the number of pointers that point to the
grandchildren. This results in "device mapper: space map common: unable
to decrement block" errors.
Fix this bug by incrementing reference counts on the grandchildren if the
btree node is shared. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix the out-of-bounds nameoff handling for trailing dirents
Currently we already have boundary-checks for nameoffs, but the trailing
dirents are special since the namelens are calculated with strnlen()
with unchecked nameoffs.
If a crafted EROFS has a trailing dirent with nameoff >= maxsize,
maxsize - nameoff can underflow, causing strnlen() to read past the
directory block.
nameoff0 should also be verified to be a multiple of
`sizeof(struct erofs_dirent)` as well [1].
[1] https://sashiko.dev/#/patchset/20260416063511.3173774-1-hsiangkao%40linux.alibaba.com |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
nouveau_gem_pushbuf_reloc_apply() validates each relocation with
if (r->reloc_bo_offset + 4 > nvbo->bo.base.size)
but reloc_bo_offset is __u32 (uapi/drm/nouveau_drm.h) and the integer
literal 4 promotes to unsigned int, so the addition is performed in 32
bits and wraps before the comparison against the size_t bo size.
Cast to u64 so the addition happens in 64-bit arithmetic.
[ Add Fixes: tag. - Danilo ] |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()
Some crafted images can have illegal (!partial_decoding &&
m_llen < m_plen) extents, and the LZ4 inplace decompression path
can be wrongly hit, but it cannot handle (outpages < inpages)
properly: "outpages - inpages" wraps to a large value and
the subsequent rq->out[] access reads past the decompressed_pages
array.
However, such crafted cases can correctly result in a corruption
report in the normal LZ4 non-inplace path.
Let's add an additional check to fix this for backporting.
Reproducible image (base64-encoded gzipped blob):
H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g
dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i
PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz
2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w
ywAAAAAAAADwu14ATsEYtgBQAAA=
$ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt
$ dd if=/mnt/data of=/dev/null bs=4096 count=1 |
