| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix OOB write in QUERY_INFO for compound requests
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: limit BOND_MODE_8023AD to Ethernet devices
BOND_MODE_8023AD makes sense for ARPHRD_ETHER only.
syzbot reported:
BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline]
BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118
Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497
CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200
__asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105
__hw_addr_create net/core/dev_addr_lists.c:63 [inline]
__hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118
__dev_mc_add net/core/dev_addr_lists.c:868 [inline]
dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886
bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180
do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963
do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
____sys_sendmsg+0x505/0x820 net/socket.c:2592
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2646
__sys_sendmsg+0x164/0x220 net/socket.c:2678
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0x1dc/0x560 arch/x86/entry/syscall_32.c:307
do_fast_syscall_32+0x34/0x80 arch/x86/entry/syscall_32.c:332
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
</TASK>
The buggy address belongs to the variable:
lacpdu_mcast_addr+0x0/0x40 |
| Impact:
Undici's cache interceptor incorrectly classifies some responses as cacheable when the upstream Cache-Control header uses whitespace-padded qualified private or no-cache field names such as private=" authorization" or no-cache="\tauthorization". The parser preserves the surrounding whitespace, so later comparisons against the literal authorization field name fail and the response is stored.
In shared-cache mode, this allows a response containing one user's authenticated data to be served from cache to a subsequent caller, including an unauthenticated caller, when both requests resolve to the same cache key.
Affected applications are those that explicitly enable the cache interceptor (interceptors.cache()) in shared mode, forward Authorization headers upstream, and receive cacheable responses with non-canonical qualified private or no-cache directives.
Patches:
Upgrade to undici v7.28.0 or v8.5.0.
Workarounds:
If upgrade is not immediately possible, disable shared-cache mode for traffic that includes Authorization headers, avoid caching responses to authenticated requests, or add Vary: Authorization upstream. |
| An out-of-bounds read issue was addressed with improved input validation. This issue is fixed in iOS 18.4 and iPadOS 18.4, iPadOS 17.7.6, macOS Sequoia 15.4, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.4, visionOS 2.4, watchOS 11.4. Playing a malicious audio file may lead to an unexpected app termination. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 18.3 and iPadOS 18.3, iPadOS 17.7.6, macOS Sequoia 15.3, macOS Sonoma 14.7.5, macOS Ventura 13.7.5, tvOS 18.3, visionOS 2.3. An attacker on the local network may be able to cause a denial-of-service. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| DNG SDK versions 1.7.1 2536 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
exit: prevent preemption of oopsing TASK_DEAD task
When an already-exiting task oopses, make_task_dead() currently calls
do_task_dead() with preemption enabled. That is forbidden:
do_task_dead() calls __schedule(), which has a comment saying "WARNING:
must be called with preemption disabled!".
If an oopsing task is preempted in do_task_dead(), between becoming
TASK_DEAD and entering the scheduler explicitly, bad things happen:
finish_task_switch() assumes that once the scheduler has switched away
from a TASK_DEAD task, the task can never run again and its stack is no
longer needed; but that assumption apparently doesn't hold if the dead
task was preempted (the SM_PREEMPT case).
This means that the scheduler ends up repeatedly dropping references on
the dead task's stack, which can lead to use-after-free or double-free
of the entire task stack; in other words, two tasks can end up running
on the same stack, resulting in various kinds of memory corruption.
(This does not just affect "recursively oopsing" tasks; it is enough to
oops once during task exit, for example in a file_operations::release
handler) |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: prevent potential out-of-bounds reads in handle_auth_done()
Perform an explicit bounds check on payload_len to avoid a possible
out-of-bounds access in the callout.
[ idryomov: changelog ] |
| DNG SDK versions 1.7.1 2536 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| DNG SDK versions 1.7.1 2536 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject short ahash digests during instance creation
authencesn requires either a zero authsize or an authsize of at least
4 bytes because the ESN encrypt/decrypt paths always move 4 bytes of
high-order sequence number data at the end of the authenticated data.
While crypto_authenc_esn_setauthsize() already rejects explicit
non-zero authsizes in the range 1..3, crypto_authenc_esn_create()
still copied auth->digestsize into inst->alg.maxauthsize without
validating it. The AEAD core then initialized the tfm's default
authsize from that value.
As a result, selecting an ahash with digest size 1..3, such as
cbcmac(cipher_null), exposed authencesn instances whose default
authsize was invalid even though setauthsize() would have rejected the
same value. AF_ALG could then trigger the ESN tail handling with a
too-short tag and hit an out-of-bounds access.
Reject authencesn instances whose ahash digest size is in the invalid
non-zero range 1..3 so that no tfm can inherit an unsupported default
authsize. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt()
ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read
when the queue reader or writer index from hardware exceeds
REMOTE_QUEUE_SIZE (60).
A compromised service processor can trigger this by writing an
out-of-range value to the reader or writer MMIO register before
asserting an interrupt. Since writer is re-read from hardware on
every loop iteration, it can also be set to an out-of-range value
after the loop has already started.
The root cause is that get_queue_reader() and get_queue_writer() return
raw readl() values that are passed directly into get_queue_entry(),
which computes:
queue_begin + reader * sizeof(struct remote_input)
with no bounds check. This unchecked MMIO address is then passed to
memcpy_fromio(), reading 8 bytes from unintended device registers.
For sufficiently large values the address falls outside the PCI BAR
mapping entirely, triggering a machine check exception.
Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of
the loop body, before any call to get_queue_entry(). On an out-of-range
value, reset the reader register to 0 via set_queue_reader() before
breaking, so that normal queue operation can resume if the corrupted
hardware state is transient. |
| In the Linux kernel, the following vulnerability has been resolved:
dm mirror: fix integer overflow in create_dirty_log()
The argument count calculation in create_dirty_log() performs
`*args_used = 2 + param_count` before validating against argc. When a
user provides a param_count close to UINT_MAX via the device mapper
table string, this unsigned addition wraps around to a small value,
causing the subsequent `argc < *args_used` check to be bypassed.
The overflowed param_count is then passed as argc to dm_dirty_log_create(),
where it can cause out-of-bounds reads on the argv array.
Fix by comparing param_count against argc - 2 before performing the
addition, following the same pattern used by parse_features() in the
same file. Since argc >= 2 is already guaranteed, the subtraction is
safe. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Prevent potential null-ptr-deref in ceph_handle_auth_reply()
If a message of type CEPH_MSG_AUTH_REPLY contains a zero value for both
protocol and result, this is currently not treated as an error. In case
of ac->negotiating == true and ac->protocol > 0, this leads to setting
ac->protocol = 0 and ac->ops = NULL. Thereafter, the check for
ac->protocol != protocol returns false, and init_protocol() is not
called. Subsequently, ac->ops->handle_reply() is called, which leads to
a null pointer dereference, because ac->ops is still NULL.
This patch changes the check for ac->protocol != protocol to
!ac->protocol, as this also includes the case when the protocol was set
to zero in the message. This causes the message to be treated as
containing a bad auth protocol. |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.3, kitty's OSC 21 (color-control) query reply reflects attacker-controlled bytes, including newlines, into the shell's input without sanitization. Version 0.47.3 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: reject inodes with zero i_nlink and valid mode in ext2_iget()
ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is
zero or i_dtime is set, treating them as deleted. However, the case of
i_nlink == 0 with a non-zero mode and zero dtime slips through. Since
ext2 has no orphan list, such a combination can only result from
filesystem corruption - a legitimate inode deletion always sets either
i_dtime or clears i_mode before freeing the inode.
A crafted image can exploit this gap to present such an inode to the
VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via
ext2_unlink(), ext2_rename() and ext2_rmdir():
WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295
vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477
do_unlinkat+0x53e/0x730 fs/namei.c:4541
__x64_sys_unlink+0xc6/0x110 fs/namei.c:4587
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rename+0x35e/0x850 fs/ext2/namei.c:374
vfs_rename+0xf2f/0x2060 fs/namei.c:5021
do_renameat2+0xbe2/0xd50 fs/namei.c:5178
__x64_sys_rename+0x7e/0xa0 fs/namei.c:5223
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336
CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1
Call Trace:
<TASK>
inode_dec_link_count include/linux/fs.h:2518 [inline]
ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311
vfs_rmdir+0x204/0x690 fs/namei.c:4348
do_rmdir+0x372/0x3e0 fs/namei.c:4407
__x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577
do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Extend the existing i_nlink == 0 check to also catch this case,
reporting the corruption via ext2_error() and returning -EFSCORRUPTED.
This rejects the inode at load time and prevents it from reaching any
of the namei.c paths.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged. |
