| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, Fix off-by-one in single-FDB error rollback
On failure at index i, the reverse cleanup loop in
mlx5_lag_create_single_fdb() starts from i, so the failed index
itself is rolled back. That can operate on uninitialized state or
double-tear-down a rule the add_one path already self-rolled-back.
Start the rollback from i - 1 so only successfully-installed entries
are undone. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix possible use after free
In dma_release_channel(), check chan->device->privatecnt after call
dma_chan_put(). However, dma_chan_put() call dma_device_put() which could
release the last reference of the device if the DMA provider is already
gone and hence free it.
Fixes it by moving dma_chan_put() after the check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pt: prevent invalid cursor access for purged BOs
During a page table walk for binding, xe_pt_stage_bind() explicitly
skips initializing the xe_res_cursor for purged BOs, treating them
similarly to NULL VMAs by only setting the cursor size.
However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check
if the BO was purged before attempting to walk the cursor using
xe_res_dma() and xe_res_next(). Because the cursor was left
uninitialized for purged BOs, this falls through and triggers
warnings like:
WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next
Fix this by explicitly checking if the BO is purged in both
xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just
as we do for NULL VMAs, avoiding the invalid cursor accesses entirely.
As a precaution, also zero-initialize the cursor in xe_pt_stage_bind()
to ensure we don't pass garbage data into the page table walkers
if we ever hit a similar edge case in the future.
(cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e) |
| In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: check device type before reading ETH_ADDRS
__skb_flow_dissect() unconditionally reads 12 bytes from eth_hdr(skb)
when FLOW_DISSECTOR_KEY_ETH_ADDRS is requested. This assumes the skb
has a valid Ethernet header at mac_header, which is not always the case.
The problem can be triggered by:
1. Creating a TUN device in L3 mode (IFF_TUN, hard_header_len=0)
2. Attaching a multiq qdisc with a flower filter matching on eth_src
3. Sending a packet through AF_PACKET
Since TUN in L3 mode has no link-layer header, mac_header points to
the L3 data area. The flow dissector reads 12 bytes of uninitialized
skb memory, which then propagates through fl_set_masked_key() and is
used as a rhashtable lookup key in __fl_lookup(), as reported by KMSAN.
Rejecting the filter in the control path (at tc filter add time) is
not feasible because TC filter blocks can be shared between arbitrary
devices -- a filter installed on an Ethernet device may later classify
packets on a headerless device through a shared block. The device
association is not fixed at filter creation time.
Fix this by gating the memcpy on dev->type == ARPHRD_ETHER, which
ensures only true Ethernet-framed packets have their addresses read.
This is more precise than the previous hard_header_len >= 12 check,
which would incorrectly pass for non-Ethernet link types like IPoIB
(ARPHRD_INFINIBAND, hard_header_len=24) and FDDI (hard_header_len=21)
whose L2 headers are not in Ethernet format. Additionally check
skb_mac_header_was_set() to guard against the pathological case where
mac_header is the unset sentinel (~0U), which would cause eth_hdr() to
return a wild pointer.
For the act_mirred redirect case (Ethernet packet redirected to a
non-Ethernet device sharing a TC block), zeroing the key is the correct
behavior: the packet is now being classified on the target device, where
Ethernet address matching is not semantically meaningful.
Note: on non-Ethernet devices, the zeroed key will match a filter
configured with all-zero MAC addresses. This is an improvement over the
previous behavior where uninitialized memory could randomly match any
filter. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl: fsl_audmix: Validate written enum values
fsl_audmix_put_mix_clk_src() and fsl_audmix_put_out_src()
convert the user-provided enum item with snd_soc_enum_item_to_val()
before checking whether the item is within the enum's item count.
The generic snd_soc_put_enum_double() helper performs that
validation, but these callbacks use the converted value first: the
clock-source path tests it with BIT(), and the output-source path
indexes the prms transition table with it.
Reject out-of-range enum items before converting them. |
| Scriban versions from 3.0.0 through 7.2.5 contain a denial of service vulnerability in the ScriptRange.Multiply operator that bypasses LoopLimit when the left operand is a lazy sequence. Attackers can supply templates with array multiplication on lazy sequences to execute billions of uncharged iterations, pinning CPU cores and exhausting garbage collection resources even when LoopLimit is set to 1. |
| The Windows interactive service in OpenVPN 2.4.0 through 2.6.21 and 2.7_alpha1 through 2.7.5 allows local authenticated users to bypass the trusted configuration directory constraint and load arbitrary configuration files via crafted options that bypass whitelist checks |
| In Progress ShareFile Storage Zones Controller versions <= 5.12.5 and <= 6.0.2, an authenticated zone administrator can exploit improper validation in the download preparation flow, enabling attacker-controlled files to be written outside the intended preparation directory. This can lead to remote code execution in v5 versions. Remote code execution is not confirmed on v6 versions. |
| The Podlove Podcast Publisher plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the create_link_item function in all versions up to, and including, 4.5.3. This makes it possible for authenticated attackers, with contributor-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). A viable POP chain exists within the plugin itself via Podlove\ImageCache\GenerationGuard, whose __destruct() method invokes wp_delete_file() with an attacker-controlled file path populated through unserialization. |
| The Real Estate Manager Pro plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 12.8.6. This is due to improper capability handling in the allow_attachment_actions() function, which can treat a target user ID as a media attachment ID during user capability checks. This makes it possible for authenticated attackers, with Subscriber-level access and above, to edit an administrator account and escalate their privileges to Administrator when the targeted user ID matches the ID of an existing media attachment. |
| The bLoyal: Loyalty & Promotions by bLoyal plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 3.1.611.78. This is due to the AJAX actions `save_bloyal_configuration_data` and `save_bloyal_accesskeyverification_data` being registered without any capability or nonce checks, and the `bloyal_customer_auto_login` function unconditionally trusting the `Customer.ExternalId` value returned by whichever API URL is stored in the plugin's options. This makes it possible for authenticated attackers, with Subscriber-level access and above, to overwrite the plugin's bLoyal Loyalty Engine API URL (`bloyal_custom_loyaltyengine_api_url`) and the `is_bloyal_custom_api_url` flag via the unprotected AJAX actions, then trigger the unauthenticated `/cart` REST route to cause `bloyal_customer_auto_login` to fetch customer data from an attacker-controlled endpoint and call `wp_set_auth_cookie()` with an attacker-supplied `Customer.ExternalId`, thereby authenticating as any WordPress user including the site Administrator. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix BPF_PROG_QUERY OOB write and cgroup backward compat
BPF_PROG_QUERY writes back the 'query.revision' field unconditionally to
userspace. If userspace passes a smaller 'bpf_attr' structure (e.g. 40
bytes, which was the layout before the addition of 'query.revision'),
the kernel performs an out-of-bounds write.
Fix this by propagating the user-provided attribute size 'uattr_size'
down to the cgroup query handlers, and conditionally skipping writing
the revision field to userspace when the provided buffer size is
insufficient.
query.revision in bpf_mprog_query is structurally identical to the
cgroup case: a late tail field, written unconditionally.
But the backward-compat hazard is not the same.
The min-historical-size test is per command, and bpf_mprog_query only
serves attach types that were born with revision in the struct:
- tcx_prog_query -> BPF_TCX_INGRESS/EGRESS
- netkit_prog_query -> BPF_NETKIT_PRIMARY/PEER
tcx, netkit, the revision field, and bpf_mprog_query itself all landed in
the same v6.6 merge window (053c8e1f235d added the mprog query API +
revision; tcx in e420bed02507, netkit in 35dfaad7188c). There has never
been a tcx/netkit BPF_PROG_QUERY userspace that doesn't know about
revision. So for these commands the minimum legitimate struct already
covers offset 56-64 — no old binary can be broken here.
Contrast with cgroup: BPF_PROG_QUERY on cgroup attach types shipped in
2017; revision write-back was bolted on years later (120933984460). That
path has a real population of pre-revision callers. |
| Use after free in Windows DNS allows an unauthorized attacker to elevate privileges over a network. |
| Use after free in Windows DNS allows an authorized attacker to execute code over a network. |
| Out-of-bounds write in Windows DNS allows an unauthorized attacker to execute code over an adjacent network. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: mipi-i3c-hci: Fix race in i3c_hci_addr_to_dev()
i3c_hci_addr_to_dev() walks bus->devs.i3c, which is protected by
bus.lock (rwsem). However, it is invoked from the MIPI I3C HCI IRQ
handler, which cannot take bus.lock. This allows concurrent device
addition/removal in the I3C core to modify the list while it is being
traversed, potentially leading to use-after-free or crashes.
Remove the dependency on the bus device list and introduce a dedicated
lookup table. Add an ibi_devs[] array indexed by DAT entry, maintained
under hci->lock. Update the array when IBIs are enabled or disabled,
so that it always reflects the set of devices allowed to generate IBIs.
Also update when IBIs are freed, to cover the corner case when an IBI is
freed without first being disabled (e.g. oldedev in
i3c_master_add_i3c_dev_locked()).
Move i3c_hci_addr_to_dev() into core.c, reimplement it using the new
array, and add a lockdep assertion to enforce that hci->lock is held
by callers.
Demote a message in PIO and DMA IBI handling, from an error to a debug
message, because there is a race window when the condition can arise
normally. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbe: do not configure xps for XDP queues
netif_set_xps_queue() should not be called for an XDP Tx queue, since such
queues are not netdev-exposed. On systems with number of CPUs >=64, on E610
adapter, netdev is configured with maximum number queue pairs being 63
(due to MSI-X assignment), but configuring XDP results in 64 XDP queues.
So, during XDP program load, when netif_set_xps_queue() is called for the
last XDP queue, we get a WARNING with a call trace and KASAN report
afterwards (if enabled).
[ 2012.699800] WARNING: net/core/dev.c:2854 at __netif_set_xps_queue+0x116a/0x1e40, CPU#36: xdpsock/103668
[...]
[ 2012.700029] RIP: 0010:__netif_set_xps_queue+0x116a/0x1e40
[ 2012.700035] Code: b6 34 06 48 89 f8 83 e0 07 83 c0 01 40 38 f0 7c 09 40 84 f6 0f 85 03 0a 00 00 0f b7 44 24 40 66 43 89 44 6a 18 e9 01 fb ff ff <0f> 0b e9 f2 ee ff ff 44 8b 44 24 44 45 85 c0 74 50 4d 85 e4 0f 84
[ 2012.700040] RSP: 0018:ffff8882369aeb28 EFLAGS: 00010246
[ 2012.700046] RAX: 0000000000000000 RBX: 000000000000003f RCX: 0000000000000000
[ 2012.700050] RDX: 1ffff1111da3d891 RSI: ffff888120e34250 RDI: ffff8888ed1ec488
[ 2012.700054] RBP: ffff888913281560 R08: 0000000000000000 R09: ffff8888ed1ec000
[ 2012.700058] R10: ffff8888a2e83180 R11: 0000000000000000 R12: 0000000000007fa8
[ 2012.700061] R13: 000000000000003f R14: ffff888120e34854 R15: ffff8889132817c8
[ 2012.700065] FS: 00007fc8ea9ff740(0000) GS:ffff88884cefe000(0000) knlGS:0000000000000000
[ 2012.700069] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2012.700073] CR2: 00007f81c8000020 CR3: 00000002299f8006 CR4: 00000000007726f0
[ 2012.700077] PKRU: 55555554
[ 2012.700080] Call Trace:
[ 2012.700084] <TASK>
[ 2012.700087] ? ktime_get+0x61/0x150
[ 2012.700097] ? usleep_range_state+0x133/0x1b0
[ 2012.700108] ? __pfx_usleep_range_state+0x10/0x10
[ 2012.700114] netif_set_xps_queue+0x31/0x50
[ 2012.700119] ixgbe_configure_tx_ring+0x472/0x920 [ixgbe]
[...]
[ 2012.700486] ixgbe_xdp+0x38f/0x750 [ixgbe]
[...]
[ 2012.701094] BUG: KASAN: slab-out-of-bounds in __netif_set_xps_queue+0x1ac5/0x1e40
[ 2012.701100] Write of size 4 at addr ffff88888d43cff8 by task xdpsock/103668
Skip XPS configuration for XDP Tx queues. |
| In the Linux kernel, the following vulnerability has been resolved:
kernfs: fix xattr race condition with multiple superblocks
Multiple superblocks with different namespaces can share the same
kernfs_node when kernfs_test_super() finds a matching root but
different namespace. This means multiple inodes from different
superblocks can reference the same kernfs_node->iattr->xattrs
structure.
The VFS layer only holds per-inode locks during xattr operations,
which is insufficient to serialize concurrent xattr modifications on
the shared kernfs_node. This can lead to race conditions in
simple_xattr_set() where the lookup->replace/remove sequence is not
atomic with respect to operations from other superblocks.
Fix this by protecting xattr operations with the existing hashed
kernfs_locks->open_file_mutex[] array, which is already used to
protect per-node open file data. The hashed mutex array provides
scalable per-node serialization (scaled by CPU count, up to 1024 locks
on 32+ CPU systems) with zero memory overhead.
Changes:
- Rename open_file_mutex[] to node_mutex[] to reflect dual purpose
- Add kernfs_node_lock_ptr() and kernfs_node_lock() helpers
- Protect simple_xattr_set() calls in kernfs_xattr_set() and
kernfs_vfs_user_xattr_set() with the hashed mutex
- Update file.c to use new helpers via compatibility wrappers
- Update documentation to explain the extended lock usage |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows DNS allows an unauthorized attacker to execute code over a network. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service and obtain sensitive information due to an integer underflow. |
