| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: prevent use-after-free when deleting claims
When batadv_bla_del_backbone_claims() removes all claims for a backbone, it
does this by dropping the link entry in the hash list. This list entry
itself was one of the references which need to be dropped at the same time
via batadv_claim_put().
But the batadv_claim_put() must not be done before the last access to the
claim object in this function. Otherwise the claim might be freed already
by the batadv_claim_release() function before the list entry was dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: fix UAF in inactivity-timer cleanup path
Commit 38224c472a03 ("HID: appletb-kbd: fix slab use-after-free bug in
appletb_kbd_probe") added timer_delete_sync(&kbd->inactivity_timer) to
both the probe close_hw error path and appletb_kbd_remove(), but the
way it was wired in left the inactivity timer reachable during driver
tear-down via two distinct windows.
Window A -- put_device() before timer_delete_sync():
put_device(&kbd->backlight_dev->dev);
timer_delete_sync(&kbd->inactivity_timer);
The inactivity_timer softirq reads kbd->backlight_dev and calls
backlight_device_set_brightness() -> mutex_lock(&ops_lock). If a
concurrent hid_appletb_bl unbind drops the last devm reference
between these two calls, the backlight_device is freed and the
mutex_lock() touches freed memory.
Window B -- backlight cleanup before hid_hw_stop():
if (kbd->backlight_dev) {
timer_delete_sync(...);
put_device(...);
}
hid_hw_close(hdev);
hid_hw_stop(hdev);
Even after Window A is closed, hid_hw_close()/hid_hw_stop() still run
afterwards, so a late ".event" callback from the HID core (USB URB
completion on real Apple hardware) can arrive after
timer_delete_sync() drained the softirq but before put_device() drops
the reference. That callback reaches reset_inactivity_timer(), which
calls mod_timer() and re-arms the timer. The freshly re-armed timer
can then fire on the about-to-be-freed backlight_device.
Both windows produce the same KASAN slab-use-after-free:
BUG: KASAN: slab-use-after-free in __mutex_lock+0x1aab/0x21c0
Read of size 8 at addr ffff88803ee9a108 by task swapper/0/0
Call Trace:
<IRQ>
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
handle_softirqs
Allocated by task N:
devm_backlight_device_register
appletb_bl_probe
Freed by task M:
(concurrent hid_appletb_bl unbind path)
Close both windows at once by reworking the tear-down in
appletb_kbd_remove() and in the probe close_hw error path so that
1) hid_hw_close()/hid_hw_stop() run before the backlight cleanup,
guaranteeing no further .event callback can fire and re-arm the
timer, and
2) inside the "if (kbd->backlight_dev)" block, timer_delete_sync()
runs before put_device(), so the softirq is drained before the
final reference is dropped. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix accept queue count leak on transport mismatch
virtio_transport_recv_listen() calls sk_acceptq_added() before
vsock_assign_transport(). If vsock_assign_transport() fails or
selects a different transport, the error path returns without
calling sk_acceptq_removed(), permanently incrementing
sk_ack_backlog.
After approximately backlog+1 such failures, sk_acceptq_is_full()
returns true, causing the listener to reject all new connections.
Fix by moving sk_acceptq_added() to after the transport validation,
matching the pattern used by vmci_transport and hyperv_transport. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/hdcp: Add NULL check for media_gt in intel_hdcp_gsc_check_status()
When media GT is disabled via configfs, there is no allocation for
media_gt, which is kept as NULL. In such scenario,
intel_hdcp_gsc_check_status() results in a kernel pagefault error due to
>->uc.gsc being evaluated as an invalid memory address.
Fix that by introducing a NULL check on media_gt and bailing out early
if so.
While at it, also drop the NULL check for gsc, since it can't be NULL if
media_gt is not NULL.
v2:
- Get address for gsc only after checking that gt is not NULL.
(Shuicheng)
- Drop the NULL check for gsc. (Shuicheng)
v3:
- Add "Fixes" and "Cc: <stable...>" tags. (Matt)
(cherry picked from commit bfaf87e84ca3ca3f6e275f9ae56da47a8b55ffd1) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Add bounds checking to ib_{get,set}_value
The uvd/vce/vcn code accesses the IB at predefined offsets without
checking that the IB is large enough. Check the bounds here. The caller
is responsible for making sure it can handle arbitrary return values.
Also make the idx a uint32_t to prevent overflows causing the condition
to fail. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fsl: fix controller deregistration
Make sure to deregister the controller before releasing underlying
resources like DMA during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: rspi: fix controller deregistration
Make sure to deregister the controller before releasing underlying
resources like DMA during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.
Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.
v2: Add comments to explain the free logic.
(cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9) |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads
The pads missed checks for connected devices which may a null dereference
when the stream is enabled.
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
pc : rkcif_interface_enable_streams+0x48/0xf0
lr : rkcif_interface_enable_streams+0x44/0xf0
Call trace:
rkcif_interface_enable_streams+0x48/0xf0
v4l2_subdev_enable_streams+0x26c/0x3f0
rkcif_stream_start_streaming+0x140/0x278
vb2_start_streaming+0x74/0x188
vb2_core_streamon+0xe0/0x1d8
vb2_ioctl_streamon+0x60/0xa8
v4l_streamon+0x2c/0x40
__video_do_ioctl+0x34c/0x400
video_usercopy+0x2d0/0x800
video_ioctl2+0x20/0x60
v4l2_ioctl+0x48/0x78 |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device name memory leak
The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.
Use a stack-local char array instead of using kzalloc() for name. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.
(cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e) |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix use-after-free on unbind
The state machine work is scheduled by the interrupt handler and
therefore needs to be cancelled after disabling interrupts to avoid a
potential use-after-free. |
| Uncontrolled resource consumption in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| Improper link resolution before file access ('link following') in .NET allows an unauthorized attacker to perform tampering locally. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: run inactivity autodim from workqueues
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock
via backlight_device_set_brightness() -> mutex_lock() from two
different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it
runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
* reset_inactivity_timer() is called from appletb_kbd_hid_event() and
appletb_kbd_inp_event(). On real USB hardware these run in
softirq/IRQ context (URB completion and input-event dispatch).
When the Touch Bar has already been dimmed or turned off, the
reset path calls backlight_device_set_brightness() directly to
restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them
together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to
struct delayed_work; the callback (appletb_inactivity_work) now
runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have
reset_inactivity_timer() schedule it instead of calling
backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the
existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on
dim, turn-off and user activity); only the execution context of the
sleeping call changes. The timer field and callback are renamed to
match their new type; reset_inactivity_timer() keeps its name because
it is invoked from input event paths that read naturally as "reset
the inactivity timer". |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
(cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51) |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix controller deregistration
Make sure to deregister the controller before disabling and releasing
underlying resources like interrupts and gpios during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix integer overflow on buff_pos
Fixing an integer overflow present in batadv_iv_ogm_send_to_if. The size
check is done using the int type in batadv_iv_ogm_aggr_packet whereas the
buff_pos variable uses the s16 type. This could lead to an out-of-bound
read. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: validate SVM ioctl nattr against buffer size
Validate nattr field against the buffer size, preventing
out-of-bounds buffer access via user-controlled attribute count.
(cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f) |
| Adobe Campaign Classic (ACC) versions 7.4.3 build 9394 and earlier are affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue does not require user interaction. Scope is changed. |
