| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mips: select CONFIG_WEAK_REORDERING_BEYOND_LLSC from CONFIG_EYEQ
On I6500 CPU cores, lld and scd give no ordering guarantees (same as all
other instructions). To respect the assumption that arch_cmpxchg() is
fully ordered, we must inject sync instructions above and below our
lld/scd loops using the already in place WEAK_REORDERING_BEYOND_LLSC
infrastructure.
Otherwise, bad things can happen:
[ 34.054496] CPU 3 Unable to handle kernel paging request at virtual address 0000000000000000, epc == a80000080838e01c, ra == a80000080838dfc4
[ 34.054559] Oops[#1]:
[ 34.069561] CPU: 3 UID: 0 PID: 170 Comm: pipe_race Not tainted 7.2.0-rc6-01553-gb73c35220968-dirty #103 VOLUNTARY
[ 34.079932] Hardware name: Mobile EyeQ5 MP5 Evaluation board
[ 34.085592] $ 0 : 0000000000000000 0000000000000001 0000000000000000 0000000000000000
[ 34.093616] $ 4 : a800000808ee2618 000000000b7a879d 0000000000001000 0000000000000000
[ 34.101638] $ 8 : 0000000000e3f2c9 0000000000000000 a800000808a2a9f8 0000000000000000
[ 34.109660] $12 : a8000008139ffcd8 ffffffff84080018 a80000080837fae0 7878787878787878
[ 34.117682] $16 : a800000807e82940 0000000000001000 0000000000000000 0000000000000000
[ 34.125704] $20 : a800000802920e00 a8000008139ffdf8 a800000802649400 0000000000e3f2c9
[ 34.133726] $24 : 0000000000000006 00000001200406e0
[ 34.141783] $28 : a8000008139fc000 a8000008139ffd10 0000000000e3f2c8 a80000080838dfc4
[ 34.149837] epc : a80000080838e01c anon_pipe_read+0xd4/0x428
[ 34.155697] ra : a80000080838dfc4 anon_pipe_read+0x7c/0x428
[ 34.161549] Status: 140000e3 KX SX UX KERNEL EXL IE
[ 34.166551] Cause : 40800408 (ExcCode 02)
[ 34.170574] BadVA : 0000000000000000
[ 34.174161] PrId : 0001b028 (MIPS I6500)
[ 34.178183] Process pipe_race (pid: 170, threadinfo=000000005ca35720, task=00000000e1013890, tls=000000014ebbb780)
[ 34.188568] Stack : a800000802649400 0000000000000000 0000000000000000 a8000008139ffdd0
[ 34.196623] 0000000000000fba a800000808ee0000 0000000000000001 a8000008130c3e80
[ 34.204676] a8000008080d1280 a8000008139ffd58 a8000008139ffd58 1dbd2b22ea1dd500
[ 34.212729] a800000802649400 a800000808ee0000 ffffffffffffffea 0000000000000001
[ 34.220783] 0000000000001000 0000000000000000 00000001200ae518 ffffffffffffffff
[ 34.228836] 000000fffbe0e530 a80000080837edf4 000000fffbe0e530 0000000000000000
[ 34.236890] 0000000000000000 0000000000000000 000000014ebb55a0 0000000000001000
[ 34.244943] 0000000000000001 a800000802649400 0000000000000000 0000000000000000
[ 34.252996] 0000000000000000 0000400400000000 0000000000000000 1dbd2b22ea1dd500
[ 34.261049] 00000000140000e3 a800000802649400 a800000802649400 a800000808ee0000
[ 34.269103] ...
[ 34.271568] Call Trace:
[ 34.274026] [<a80000080838e01c>] anon_pipe_read+0xd4/0x428
[ 34.279533] [<a80000080837edf4>] vfs_read+0x25c/0x318
[ 34.284607] [<a80000080837faac>] ksys_read+0x104/0x138
[ 34.289763] [<a80000080802b9cc>] syscall_common+0x44/0x68
[ 34.295187]
[ 34.296689] Code: f84000cf 02209825 de020010 <dc420000> d8400004 02002825 0040f809 02802025 f84000c3
[ 34.306504]
[ 34.308099] ---[ end trace 0000000000000000 ]---
My initial reproducer was the xdp-tools test suite. A standalone
reproducer would be an lld/scd loop that, when the read is reordered by
the CPU, triggers a fault. We can achieve this from userspace by
stressing an anonymous pipe, which uses a mutex. Program used:
// SPDX-License-Identifier: GPL-2.0
// pipe_race.c - reproducer for MIPS LL/SC reordering vs fs/pipe.c
//
// Two userspace processes on an anonymous pipe:
// parent = writer: tight write() loop
// child = reader: tight read() loop
#define _GNU_SOURCE
#include <assert.h>
#include <errno.h>
#include <sched.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: PPC: Book3S HV: fix use-after-free in kvmhv_emulate_tlbie_all_lpid()
kvmhv_emulate_tlbie_all_lpid() iterates the nested-guest IDR and drops
mmu_lock before calling kvmhv_emulate_tlbie_lpid(), but does not hold a
reference on the kvm_nested_guest pointer obtained from the IDR. A
concurrent vCPU issuing a single-LPID tlbie (is=2, ric=2) can race
through kvmhv_flush_nested() -> kvmhv_remove_nested() -> idr_remove /
--refcnt -> kvmhv_release_nested() -> kfree(gp) in that window, leaving
the iterating vCPU with a dangling pointer. The subsequent
mutex_lock(&gp->tlb_lock) and accesses to gp->shadow_pgtable,
gp->shadow_lpid and gp->l1_host all touch freed memory. The free path
is fully L1-controlled.
Fix this by incrementing gp->refcnt inside the loop before dropping
mmu_lock, mirroring what kvmhv_get_nested() does, and releasing the
reference with kvmhv_put_nested() after the per-guest work completes.
This is the same get/put discipline already used at every other
call site that drops mmu_lock while holding a nested-guest pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: protect runlist updates with the runlist lock
ntfs_non_resident_attr_shrink() calls runlist helpers that require the
runlist write lock, but did not hold it while freeing clusters and
truncating the runlist. Serialize those operations and the resident
conversion with the runlist lock.
ntfs_attr_map_cluster() can merge a newly allocated run before updating
mapping pairs. If the update fails, free the clusters and restore both
the in-memory runlist and on-disk mapping pairs from a saved runlist.
Mark the volume in error if either rollback step fails. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Bound fragmented header copies by the remaining length
siw_get_hdr() can receive an extended DDP/RDMAP header across more than
one TCP callback. The first callback may receive most of the header,
while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead
of the number of missing bytes. This makes the destination move past the
end of the header and overwrite the receive state, including
fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd
value as a copy offset, which creates an OOB write.
Use the number of header bytes already received when calculating the
next copy length. |
| ieee802154_decipher_data_frame() in subsys/net/l2/ieee802154/ieee802154_frame.c computed payload_len = net_pkt_get_len(pkt) - ll_hdr_len - authtag_len without first checking that the received frame is at least ll_hdr_len + authtag_len bytes long. All three variables are uint8_t, so a frame whose payload is shorter than the configured authentication tag makes the subtraction wrap around to a large value (up to 255).
The wrapped length is passed unchanged to ieee802154_decrypt_auth() and on to the CCM operation as cipher_pkt.in_len/out_buf_max, with apkt->tag pointing at frame + ll_hdr_len + payload_len. Because the receive buffer is allocated to the exact length of the frame received from the radio driver, the crypto layer then reads several hundred bytes past the end of the packet buffer and writes the same number of decrypted bytes back over it in place. The frame's authentication tag is only verified after this processing has taken place, so no key material, association or prior authentication is needed — a single crafted short frame from any device in radio range is sufficient. Frame validation in ieee802154_validate_frame() does not prevent it: a data frame is accepted with a one-byte payload.
The result is an out-of-bounds read and an out-of-bounds write of up to roughly 240 bytes into the adjacent network-buffer pool, corrupting other packets or allocator metadata and typically faulting the target. The out-of-bounds content is not attacker-chosen (it is ciphertext XOR keystream over out-of-bounds memory) and the frame is dropped when tag verification fails, so the primary impact is memory corruption and denial of service rather than information disclosure.
Exposure is limited to configurations that enable the experimental CONFIG_NET_L2_IEEE802154_SECURITY option, select a crypto device via CONFIG_NET_L2_IEEE802154_SECURITY_CRYPTO_DEV_NAME, and have established a security session with a level other than IEEE802154_SECURITY_LEVEL_NONE; with security disabled or at level NONE the tag length is zero and no underflow occurs. The fix rejects frames shorter than ll_hdr_len + authtag_len before the subtraction, and adds the matching guard on the transmit side in ieee802154_create_data_frame(). |
| Apache YuniKorn 1.9.0 and earlier does not implement label and user annotation checks for workload UPDATE action bypassing all checks. Workloads in YuniKorn are defined as the following Kubernetes objects: "deployments", "replicasets", "statefulsets", "daemonsets", "jobs", "cronjobs". The CREATE action correctly enforces the checks for all object types.
The bypass allows any user to specify an arbitrary user info annotation. The same bypass also allows changing the application ID for the workload. The combination of the two applied in one UPDATE could allow access to a queue that the user normally would not have access to. Quota usage for the queue might be impacted if the application runs in the incorrect queue. User based quota enforcement is also based on the user annotation. User quota tracking could be side stepped even if the application runs in the correct queue.
Users are recommended to upgrade to version 1.10.0, which fixes this issue. |
| Apache YuniKorn 1.9.0 and earlier allows bypassing the check for the user annotation by setting a secondary label on the pod. If the pod has the label 'app=yunikorn' the checks limiting the user annotation content are not run. The label is used to identify the YuniKorn application itself in the deployments.
The bypass allows any user to specify an arbitrary user info annotation. The arbitrary user information could allow access to a queue that the user normally would not have access to. Quota usage for the queue might be impacted if the application runs in the incorrect queue. User based quota enforcement is also based on the user annotation. User quota tracking could be side stepped even if the application runs in the correct queue.
Users are recommended to upgrade to version 1.10.0, which fixes this issue. |
| Incorrect implementation of JWT/OAuth authentication in Impala executors in Apache Impala versions up to and including 4.5.2 which allows attacked to access resources served by the executor's webserver when that webserver is configured to accept JWT/OAuth tokens. Bearer token (JWT) signatures are not validated resulting in the webserver accepting any valid JWT.
Users are recommended to either disable JWT/OAuth auth for Impala executors or upgrade to version 4.5.3, which fixes this issue. |
| Path traversal of 'trusted_jar_paths' in Impala 4.5.2 allows an attacker-controlled JAR to be loaded via a relative path where the prefix matches a path specified in 'trusted_jar_paths'.
The startup flag 'trusted_jar_paths' references URIs for loading files from local or remote filesystems. Path traversal can't override the schema, but can result in loading a JAR that has been uploaded to a different location in that filesystem via Impala DDLs such as CREATE DATA SOURCE and CREATE TABLE. Path traversal can only be used if a trusted path exists, so this attack requires 'trusted_jar_paths' have a non-empty value configured by the Impala admin.
Users are recommended to upgrade to version 4.5.3, which fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: save input state data before secpath resets
xfrm_input() stores the current xfrm_state in the skb secpath while it
continues receive-side processing. Some input paths can reset that secpath
before xfrm_input() has finished dereferencing the state.
Receive callback users such as VTI and XFRM interfaces can reset the
secpath. The VTI receive path does so before checking whether the packet
crosses network namespaces, while the XFRM interface path does so only for
cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also
reset the secpath before the final drop callback reports the current
state's protocol.
If secpath_reset() drops the last state reference while the state is
concurrently deleted, xfrm_input() can still dereference the freed state
when selecting transport_finish() or reporting the drop callback protocol.
Save the state protocol on the stack while the state is still valid,
and use the already saved address family for transport_finish(). A larval
XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This
preserves the existing drop-path fallback while avoiding the post-reset
state dereferences without adding an extra state reference to every
received packet. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short beacon and probe responses
libipw_process_probe_response() and the libipw_network_init() call it
makes assume the frame contains the full 36-byte beacon and probe
response prefix, but the ipw2100 and ipw2200 receive paths only
establish that a management frame carries the generic 24-byte
three-address header.
libipw_network_init() then computes the information element length as
stats->len - sizeof(*beacon)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() yields
65524 for a 24-byte beacon, and the parser then walks the receive
buffer as if it held almost 64 KiB of information elements, reading
past the allocation.
Reject the frame before any fixed field is touched.
Found by an AI-assisted review of length arithmetic in management frame
parsers. Verified with a KUnit case under Generic KASAN on arm64 under
QEMU; I do not have the hardware, so it is not tested on a real device. |
| Out-of-bounds write via the TLS 1.3 handshake message cache in NetX Duo in Eclipse ThreadX NetX Duo 6.5.1.202602 allows a handshake message larger than the cache writes past it and on into the rest of the session control block, which holds pointers. A malicious or compromised server can make a TLS 1.3 client produce such a message before certificate authentication completes, so no server certificate is needed to reach it. |
| Memory Corruption when processing camera operations due to out-of-bounds write during driver updates. |
| The Bluetooth Mesh On-Demand Private Proxy solicitation handler in subsys/bluetooth/mesh/solicitation.c copies a received Solicitation PDU into a fixed 17-byte stack buffer without bounding the source length. In sol_pdu_decrypt(), out is allocated as NET_BUF_SIMPLE(17) and then filled with net_buf_simple_add_mem(out, in->data, in->len); net_buf_simple_add() guards its tailroom only with __ASSERT_NO_MSG, which is compiled out in production builds, so when in->len > 17 the underlying memcpy writes attacker-controlled bytes past the 17-byte stack buffer. The copy occurs before any decryption or authentication, so no key material is required to trigger it.
The oversized length arises because the mesh scan callback in subsys/bluetooth/mesh/adv.c calls net_buf_simple_restore() before dispatching to bt_mesh_sol_recv(), leaving buf->len covering the entire remaining advertising payload rather than just the Solicitation Service Data. After the parser locates the Service Data AD and consumes the Identification Type byte, the remaining buf->len is the 17-octet Network PDU plus any trailing advertising bytes, and prior to this fix there was no maximum-length check (only a minimum). An attacker can therefore append extra AD structures or padding after the Solicitation Service Data to make buf->len exceed 17.
bt_mesh_scan_cb() is registered directly as the BLE scan callback, so buf is raw, unauthenticated advertising data received over the air. Any device in radio range can send a non-connectable advertisement carrying a crafted mesh Proxy Solicitation to a node that has CONFIG_BT_MESH_OD_PRIV_PROXY_SRV enabled and is currently eligible to be solicited (GATT proxy disabled, On-Demand Private Proxy enabled), with no pairing, bonding, or provisioning. The result is an attacker-controlled stack overwrite — plausibly leading to remote code execution and at minimum a reliable remote denial of service. The fix trims buf->len to the spec-fixed 17 octets (dropping the PDU if fewer remain) before decryption. |
| The PowerPress Podcasting plugin by Blubrry WordPress plugin before 11.17.11 does not validate the destination of redirects when fetching a user-supplied media URL, allowing users with the contributor role and above to perform Server-Side Request Forgery attacks against internal services. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in David Lingren Media LIbrary Assistant media-library-assistant allows Stored XSS.This issue affects Media LIbrary Assistant: from n/a through 3.41. |
| The String locator WordPress plugin before 2.6.8 does not restrict the classes allowed when deserializing the content of a database row saved through its database editor, allowing unauthenticated attackers to store a serialized PHP object that is instantiated when an administrator later opens and saves that row. If a suitable POP chain is present via another installed String locator WordPress plugin before 2.6.8 or , this can lead to arbitrary file deletion, sensitive data disclosure or remote code execution. |
| The If-So Dynamic Content WordPress plugin before 1.10.2 does not validate the URL scheme of a request-supplied value before reflecting it into a link on an admin page, allowing attackers to execute arbitrary JavaScript in the browser of a logged-in user who opens a crafted link. |
| The Koinonia Link WordPress plugin before 1.1.5 does not check that a user is allowed to change roles before saving a role selection submitted with a profile update, allowing any authenticated user, such as a subscriber, to grant themselves the Administrator role. |
| The MetForm WordPress plugin before 4.3.1 does not sanitize or escape submitted form-field values before inserting them into the HTML body of its email notifications, allowing unauthenticated attackers to inject arbitrary markup into the administrator and submitter notification emails the site sends. |
