| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in the SFTP server message decoding logic of libssh. The issue occurs due to an incorrect packet length check that allows an integer overflow when handling large payload sizes on 32-bit systems. This issue leads to failed memory allocation and causes the server process to crash, resulting in a denial of service. |
| There's a vulnerability in the libssh package where when a libssh consumer passes in an unexpectedly large input buffer to ssh_get_fingerprint_hash() function. In such cases the bin_to_base64() function can experience an integer overflow leading to a memory under allocation, when that happens it's possible that the program perform out of bounds write leading to a heap corruption.
This issue affects only 32-bits builds of libssh. |
| A flaw was found in glib. This vulnerability allows a heap buffer overflow and denial-of-service (DoS) via an integer overflow in GLib's GIO (GLib Input/Output) escape_byte_string() function when processing malicious file or remote filesystem attribute values. |
| A heap-based buffer overflow problem was found in glib through an incorrect calculation of buffer size in the g_escape_uri_string() function. If the string to escape contains a very large number of unacceptable characters (which would need escaping), the calculation of the length of the escaped string could overflow, leading to a potential write off the end of the newly allocated string. |
| A flaw was found in grub2. When reading tar files, grub2 allocates an internal buffer for the file name. However, it fails to properly verify the allocation against possible integer overflows. It's possible to cause the allocation length to overflow with a crafted tar file, leading to a heap out-of-bounds write. This flaw eventually allows an attacker to circumvent secure boot protections. |
| A stack overflow flaw was found when reading a BFS file system. A crafted BFS filesystem may lead to an uncontrolled loop, causing grub2 to crash. |
| A flaw was found in WebKitGTK and WPE WebKit. This vulnerability allows an out-of-bounds read and integer underflow, leading to a UIProcess crash (DoS) via a crafted payload to the GLib remote inspector server. |
| The CONS_HISTORY ioctl handler did not adequately validate the requested history size. A large value caused an integer overflow in the buffer size calculation, resulting in a heap allocation smaller than expected. Subsequent initialization of the buffer wrote beyond the end of the allocation.
An unprivileged local user with access to a vt(4) device can trigger an out-of-bounds write in the kernel, potentially escalating privileges. |
| Nmap through 7.99 does not keep the IPv6 extension-header walk within the captured packet in ipv6_get_data_primitive (libnetutil/netutil.cc), so the pointer advances past the buffer and the remaining-length computation underflows to a large value. A scanned target or on-path attacker returning a crafted IPv6 response with a truncated extension header can trigger out-of-bounds reads and a crash during raw IPv6 scans. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: hvc_iucv: fix off-by-one in number of supported devices
MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8.
This is the number of entries in:
static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];
Sometimes hvc_iucv_table[] is limited by:
(a) if (num > hvc_iucv_devices) // for error detection
or
(b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places
(so these 2 don't agree; second one appears to be correct to me.)
hvc_iucv_devices can be 0..8. This is a counter.
(c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES)
If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8].
Oops. |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| libssh2 through 1.11.1 reads an attacker-controlled 32-bit attribute count from a publickey-subsystem response and uses it in the allocation num_attrs * sizeof(libssh2_publickey_attribute) without bounds checking, so on 32-bit platforms the multiplication overflows to an undersized buffer. A malicious SSH server can then drive the attribute-parsing loop to write past the allocation, causing a heap buffer overflow in a connecting libssh2 client. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/komeda: fix integer overflow in AFBC framebuffer size check
The AFBC framebuffer size validation calculates the minimum required
buffer size by adding the AFBC payload size to the framebuffer offset.
This addition is performed without checking for integer overflow.
If the addition oveflows, the size check may incorrectly succed and
allow userspace to provide an undersized drm_gem_object, potentially
leading to out-of-bounds memory access.
Add usage of check_add_overflow() to safely compute the minimum
required size and reject the framebuffer if an overflow is detected.
This makes the AFBC size validation more robust against malformed.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: fix off-by-one in bcmgenet_put_txcb
The write_ptr points to the next open tx_cb. We want to return the
tx_cb that gets rewinded, so we must rewind the pointer first then
return the tx_cb that it points to. That way the txcb can be correctly
cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
Add guards to ensure ie_length is large enough before subtracting
fixed IE offsets to prevent unsigned integer underflow. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
In drivers/infiniband/ulp/isert/ib_isert.c, isert_login_recv_done()
computes the login request payload length as wc->byte_len minus
ISER_HEADERS_LEN with no lower bound, and login_req_len is a signed int.
A remote iSER initiator can post a login Send work request carrying
fewer than ISER_HEADERS_LEN (76) bytes, so the subtraction underflows
and login_req_len becomes negative.
isert_rx_login_req() then reads that negative length back into a signed
int, takes size = min(rx_buflen, MAX_KEY_VALUE_PAIRS), and because the
min() is signed it keeps the negative value; the value is then passed as
the memcpy() length and sign-extended to a multi-gigabyte size_t. The
copy into the 8192-byte login->req_buf runs far out of bounds and
faults, crashing the target node. The login phase precedes iSCSI
authentication, so no credentials are required to reach this path.
Reject any login PDU shorter than ISER_HEADERS_LEN before the
subtraction, mirroring the existing early return on a failed work
completion, so login_req_len can never go negative. The upper bound was
already safe: a posted login buffer cannot deliver more than
ISER_RX_PAYLOAD_SIZE, so the difference stays at or below
MAX_KEY_VALUE_PAIRS and the existing min() clamps it; only the missing
lower bound needs to be added. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix arithmetic issues in dma_length()
dma_length() derives DMA region usage from command stream values and
updates region_size[]:
len = ((len + stride[0]) * size0 + stride[1]) * size1
region_size[region] = max(..., len + dma->offset)
Several arithmetic issues can corrupt the derived region size:
- signed stride values may underflow when added to len
- intermediate multiplications may overflow
- len + dma->offset may overflow during region_size updates
- dma_length() error returns were not validated by the caller
region_size[] is later used by ethosu_job.c to validate command stream
accesses against GEM buffer sizes. Arithmetic wraparound can therefore
under-report region usage and bypass the bounds validation.
Fix by validating signed additions, using overflow helpers for
multiplications and offset updates, and propagating dma_length()
failures to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: reject DMA commands with uninitialized length
cmd_state_init() initializes the command state with memset(0xff),
leaving dma->len at U64_MAX to signal missing setup. The only setter
is NPU_SET_DMA0_LEN; if userspace omits this command and issues
NPU_OP_DMA_START, dma->len remains U64_MAX.
In dma_length(), a positive stride added to U64_MAX wraps to a small
value. With size0 == 1, check_mul_overflow() does not trigger and
dma_length() returns 0 instead of U64_MAX. The caller's U64_MAX check
then passes, region_size[] stays 0, and the bounds check in
ethosu_job.c is bypassed, allowing hardware to execute DMA with stale
physical addresses.
Fix by checking for U64_MAX at the start of dma_length() before any
arithmetic, consistent with the sentinel value used throughout the
driver to detect uninitialized fields. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Fix off-by-one in check_imm signed range check
check_imm(bits, imm) is used in the arm64 BPF JIT to verify that
a branch displacement (in arm64 instruction units) fits into the
signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding
before it is handed to the encoder. The macro currently tests for
(imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits
values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A
signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check
admits one extra bit of range on each side.
In particular, for check_imm19(), values in [2^18, 2^19) slip past
the check but do not fit into the 19-bit signed imm19 field of
B.cond. aarch64_insn_encode_immediate() then masks the raw value
into the 19-bit field, setting bit 18 (the sign bit) and flipping
a forward branch into a backward one. Same class of issue exists
for check_imm26() and the B/BL encoding. Shift by (bits - 1)
instead of bits so the actual signed N-bit range is enforced. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix possible infinite loop and oob read in symlink_data()
On 32-bit architectures, the infinite loop is as follows:
len = p->ErrorDataLength == 0xfffffff8
u8 *next = p->ErrorContextData + len
next == p
On 32-bit architectures, the out-of-bounds read is as follows:
len = p->ErrorDataLength == 0xfffffff0
u8 *next = p->ErrorContextData + len
next == (u8 *)p - 8 |
