| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix bo leak in xe_dma_buf_init_obj() on allocation failure
When drm_gpuvm_resv_object_alloc() fails, the pre-allocated storage bo
is not freed. Add xe_bo_free(storage) before returning the error.
xe_dma_buf_init_obj() calls xe_bo_init_locked(), which frees the bo on
error. Therefore, xe_dma_buf_init_obj() must also free the bo on its own
error paths. Otherwise, since xe_gem_prime_import() cannot distinguish
whether the failure originated from xe_dma_buf_init_obj() or from
xe_bo_init_locked(), it cannot safely decide whether the bo should be
freed.
Add comments documenting the ownership semantics: on success, ownership
of storage is transferred to the returned drm_gem_object; on failure,
storage is freed before returning.
v2: Add comments to explain the free logic.
(cherry picked from commit 78a6c5f899f22338bbf48b44fb8950409c5a69b9) |
| In the Linux kernel, the following vulnerability has been resolved:
media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads
The pads missed checks for connected devices which may a null dereference
when the stream is enabled.
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000020
pc : rkcif_interface_enable_streams+0x48/0xf0
lr : rkcif_interface_enable_streams+0x44/0xf0
Call trace:
rkcif_interface_enable_streams+0x48/0xf0
v4l2_subdev_enable_streams+0x26c/0x3f0
rkcif_stream_start_streaming+0x140/0x278
vb2_start_streaming+0x74/0x188
vb2_core_streamon+0xe0/0x1d8
vb2_ioctl_streamon+0x60/0xa8
v4l_streamon+0x2c/0x40
__video_do_ioctl+0x34c/0x400
video_usercopy+0x2d0/0x800
video_ioctl2+0x20/0x60
v4l2_ioctl+0x48/0x78 |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device name memory leak
The device name allocated via kzalloc() in init_one_mc() is assigned to
dev->init_name but never freed on the normal removal path. device_register()
copies init_name and then sets dev->init_name to NULL, so the name pointer
becomes unreachable from the device. Thus leaking memory.
Use a stack-local char array instead of using kzalloc() for name. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.
(cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e) |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix use-after-free on unbind
The state machine work is scheduled by the interrupt handler and
therefore needs to be cancelled after disabling interrupts to avoid a
potential use-after-free. |
| Uncontrolled resource consumption in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| Improper link resolution before file access ('link following') in .NET allows an unauthorized attacker to perform tampering locally. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: appletb-kbd: run inactivity autodim from workqueues
The autodim code in hid-appletb-kbd takes backlight_device->ops_lock
via backlight_device_set_brightness() -> mutex_lock() from two
different atomic contexts:
* appletb_inactivity_timer() is a struct timer_list callback, so it
runs in softirq context. Every expiry triggers
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
Call Trace:
<IRQ>
__might_resched
__mutex_lock
backlight_device_set_brightness
appletb_inactivity_timer
call_timer_fn
run_timer_softirq
* reset_inactivity_timer() is called from appletb_kbd_hid_event() and
appletb_kbd_inp_event(). On real USB hardware these run in
softirq/IRQ context (URB completion and input-event dispatch).
When the Touch Bar has already been dimmed or turned off, the
reset path calls backlight_device_set_brightness() directly to
restore brightness, producing the same warning.
Both call sites hit the same mutex_lock()-from-atomic bug. Fix them
together by moving the blocking work onto the system workqueue:
* Convert the inactivity timer from struct timer_list to
struct delayed_work; the callback (appletb_inactivity_work) now
runs in process context where mutex_lock() is legal.
* Add a dedicated struct work_struct restore_brightness_work and have
reset_inactivity_timer() schedule it instead of calling
backlight_device_set_brightness() directly.
Cancel both works synchronously during driver tear-down alongside the
existing backlight reference drop.
The semantics are unchanged (same delays, same state transitions on
dim, turn-off and user activity); only the execution context of the
sleeping call changes. The timer field and callback are renamed to
match their new type; reset_inactivity_timer() keeps its name because
it is invoked from input event paths that read naturally as "reset
the inactivity timer". |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
(cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51) |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix controller deregistration
Make sure to deregister the controller before disabling and releasing
underlying resources like interrupts and gpios during driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix integer overflow on buff_pos
Fixing an integer overflow present in batadv_iv_ogm_send_to_if. The size
check is done using the int type in batadv_iv_ogm_aggr_packet whereas the
buff_pos variable uses the s16 type. This could lead to an out-of-bound
read. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: validate SVM ioctl nattr against buffer size
Validate nattr field against the buffer size, preventing
out-of-bounds buffer access via user-controlled attribute count.
(cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f) |
| Adobe Campaign Classic (ACC) versions 7.4.3 build 9394 and earlier are affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue does not require user interaction. Scope is changed. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "mm/hugetlbfs: update hugetlbfs to use mmap_prepare"
This reverts commit ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use
mmap_prepare") with conflict resolution to account for changes in commit
ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare").
The patch incorrectly handled hugetlb VMA lock allocation at the
mmap_prepare stage, where a failed allocation occurring after mmap_prepare
is called might result in the lock leaking.
There is no risk of a merge causing a similar issues, as
VMA_DONTEXPAND_BIT is set for hugetlb mappings.
As a first step in addressing this issue, simply revert the change so we
can rework how we do this having corrected the underlying issues.
We maintain the VMA flags changes as best we can, accounting for the fact
that we were working with a VMA descriptor previously and propagating
like-for-like changes for this.
Note that we invoke vma_set_flags() and do not call vma_start_write() as
vm_flags_set() does. This is OK as it's being done in an .mmap hook where
the VMA is not yet linked into the tree so nobody else can be accessing
it. |
| In the Linux kernel, the following vulnerability has been resolved:
8021q: delete cleared egress QoS mappings
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Fix potential ADE in loongson_gpu_fixup_dma_hang()
The switch case in loongson_gpu_fixup_dma_hang() may not DC2 or DC3, and
readl(crtc_reg) will access with random address, because the "device" is
from "base+PCI_DEVICE_ID", "base" is from "pdev->devfn+1". This is wrong
when my platform inserts a discrete GPU:
lspci -tv
-[0000:00]-+-00.0 Loongson Technology LLC Hyper Transport Bridge Controller
...
+-06.0 Loongson Technology LLC LG100 GPU
+-06.2 Loongson Technology LLC Device 7a37
...
Add a default switch case to fix the panic as below:
Kernel ade access[#1]:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.136-loong64-desktop-hwe+ #4
pc 90000000017e5534 ra 90000000017e54c0 tp 90000001002f8000 sp 90000001002fb6c0
a0 80000efe00003100 a1 0000000000003100 a2 0000000000000000 a3 0000000000000002
a4 90000001002fb6b4 a5 900000087cdb58fd a6 90000000027af000 a7 0000000000000001
t0 00000000000085b9 t1 000000000000ffff t2 0000000000000000 t3 0000000000000000
t4 fffffffffffffffd t5 00000000fffb6d9c t6 0000000000083b00 t7 00000000000070c0
t8 900000087cdb4d94 u0 900000087cdb58fd s9 90000001002fb826 s0 90000000031c12c8
s1 7fffffffffffff00 s2 90000000031c12d0 s3 0000000000002710 s4 0000000000000000
s5 0000000000000000 s6 9000000100053000 s7 7fffffffffffff00 s8 90000000030d4000
ra: 90000000017e54c0 loongson_gpu_fixup_dma_hang+0x40/0x210
ERA: 90000000017e5534 loongson_gpu_fixup_dma_hang+0xb4/0x210
CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
PRMD: 00000004 (PPLV0 +PIE -PWE)
EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
ESTAT: 00480000 [ADEM] (IS= ECode=8 EsubCode=1)
BADV: 7fffffffffffff00
PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
Modules linked in:
Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
Stack : 0000000000000006 90000001002fb778 90000001002fb704 0000000000000007
0000000016a65700 90000000017e5690 000000000000ffff ffffffffffffffff
900000000209f7c0 9000000100053000 900000000209f7a8 9000000000eebc08
0000000000000000 0000000000000000 0000000000000006 90000001002fb778
90000001000530b8 90000000027af000 0000000000000000 9000000100054000
9000000100053000 9000000000ebb70c 9000000100004c00 9000000004000001
90000001002fb7e4 bae765461f31cb12 0000000000000000 0000000000000000
0000000000000006 90000000027af000 0000000000000030 90000000027af000
900000087cd6f800 9000000100053000 0000000000000000 9000000000ebc560
7a2500147cdaf720 bae765461f31cb12 0000000000000001 0000000000000030
...
Call Trace:
[<90000000017e5534>] loongson_gpu_fixup_dma_hang+0xb4/0x210
[<9000000000eebc08>] pci_fixup_device+0x108/0x280
[<9000000000ebb70c>] pci_setup_device+0x24c/0x690
[<9000000000ebc560>] pci_scan_single_device+0xe0/0x140
[<9000000000ebc684>] pci_scan_slot+0xc4/0x280
[<9000000000ebdd00>] pci_scan_child_bus_extend+0x60/0x3f0
[<9000000000f5bc94>] acpi_pci_root_create+0x2b4/0x420
[<90000000017e5e74>] pci_acpi_scan_root+0x2d4/0x440
[<9000000000f5b02c>] acpi_pci_root_add+0x21c/0x3a0
[<9000000000f4ee54>] acpi_bus_attach+0x1a4/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<90000000010e200c>] device_for_each_child+0x6c/0xe0
[<9000000000f4bbf4>] acpi_dev_for_each_child+0x44/0x70
[<9000000000f4ef40>] acpi_bus_attach+0x290/0x3c0
[<9000000000f5211c>] acpi_bus_scan+0x6c/0x280
[<900000000189c028>] acpi_scan_init+0x194/0x310
[<900000000189bc6c>] acpi_init+0xcc/0x140
[<9000000000220cdc>] do_one_initcall+0x4c/0x310
[<90000000018618fc>] kernel_init_freeable+0x258/0x2d4
[<900000000184326c>] kernel_init+0x28/0x13c
[<9000000000222008>] ret_from_kernel_thread+0xc/0xa4 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: drop stray 'static' from fast-RX rx_result
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix heap leak in IEEE 1284 device ID via short response
usblp_ctrl_msg() collapses the usb_control_msg() return value to
0/-errno, discarding the actual number of bytes transferred. A broken
printer can complete the GET_DEVICE_ID control transfer short and the
driver has no way to know.
usblp_cache_device_id_string() reads the 2-byte big-endian length prefix
from the response and trusts it (clamped only to the buffer bounds).
The buffer is kmalloc(1024) at probe time. A device that sends exactly
two bytes (e.g. 0x03 0xFF, claiming a 1023-byte ID) leaves
device_id_string[2..1022] holding stale kmalloc heap.
That stale data is then exposed:
- via the ieee1284_id sysfs attribute (sprintf("%s", buf+2), truncated
at the first NUL in the stale heap), and
- via the IOCNR_GET_DEVICE_ID ioctl, which copy_to_user()s the full
claimed length regardless of NULs, up to 1021 bytes of uninitialized
heap, with the leak size chosen by the device.
Fix this up by just zapping the buffer with zeros before each request
sent to the device. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix divide-by-zero in setup_geo() with zero far_copies
setup_geo() extracts near_copies (nc) and far_copies (fc) from the
user-provided layout parameter without checking for zero. When fc=0
with the "improved" far set layout selected, 'geo->far_set_size =
disks / fc' triggers a divide-by-zero.
Validate nc and fc immediately after extraction, returning -1 if
either is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
fanotify: fix false positive on permission events
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group. |
