| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Inappropriate implementation in CSS in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in Chromoting in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code via malicious network traffic. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
x86-64: rename misleadingly named '__copy_user_nocache()' function
This function was a masterclass in bad naming, for various historical
reasons.
It claimed to be a non-cached user copy. It is literally _neither_ of
those things. It's a specialty memory copy routine that uses
non-temporal stores for the destination (but not the source), and that
does exception handling for both source and destination accesses.
Also note that while it works for unaligned targets, any unaligned parts
(whether at beginning or end) will not use non-temporal stores, since
only words and quadwords can be non-temporal on x86.
The exception handling means that it _can_ be used for user space
accesses, but not on its own - it needs all the normal "start user space
access" logic around it.
But typically the user space access would be the source, not the
non-temporal destination. That was the original intention of this,
where the destination was some fragile persistent memory target that
needed non-temporal stores in order to catch machine check exceptions
synchronously and deal with them gracefully.
Thus that non-descriptive name: one use case was to copy from user space
into a non-cached kernel buffer. However, the existing users are a mix
of that intended use-case, and a couple of random drivers that just did
this as a performance tweak.
Some of those random drivers then actively misused the user copying
version (with STAC/CLAC and all) to do kernel copies without ever even
caring about the exception handling, _just_ for the non-temporal
destination.
Rename it as a first small step to actually make it halfway sane, and
change the prototype to be more normal: it doesn't take a user pointer
unless the caller has done the proper conversion, and the argument size
is the full size_t (it still won't actually copy more than 4GB in one
go, but there's also no reason to silently truncate the size argument in
the caller).
Finally, use this now sanely named function in the NTB code, which
mis-used a user copy version (with STAC/CLAC and all) of this interface
despite it not actually being a user copy at all. |
| Insufficient validation of untrusted input in DevTools in Google Chrome prior to 149.0.7827.53 allowed a remote attacker who had compromised the renderer process to inject arbitrary scripts or HTML (UXSS) via a crafted HTML page. (Chromium security severity: High) |
| Inappropriate implementation in CSS in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to inject arbitrary scripts or HTML (UXSS) via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in Cast Streaming in Google Chrome prior to 149.0.7827.53 allowed an attacker on the local network segment to execute arbitrary code via malicious network traffic. (Chromium security severity: Critical) |
| Use after free in Cast in Google Chrome prior to 149.0.7827.53 allowed an attacker on the local network segment to potentially exploit heap corruption via malicious network traffic. (Chromium security severity: Critical) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop reclaim before pushing AIL during unmount
The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while
background reclaim and inodegc are still running. This is broken
independently of any use-after-free issues - background reclaim and
inodegc should not be running while the AIL is being pushed during
unmount, as inodegc can dirty and insert inodes into the AIL during the
flush, and background reclaim can race to abort and free dirty inodes.
Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background
reclaim before pushing the AIL. Stop inodegc before cancelling
m_reclaim_work because the inodegc worker can re-queue m_reclaim_work
via xfs_inodegc_set_reclaimable. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Iron Mountain Archiving Services Inc. EnVision allows Command Injection.
This issue affects enVision: before 250563. |
| In the Linux kernel, the following vulnerability has been resolved:
romfs: check sb_set_blocksize() return value
romfs_fill_super() ignores the return value of sb_set_blocksize(), which
can fail if the requested block size is incompatible with the block
device's configuration.
This can be triggered by setting a loop device's block size larger than
PAGE_SIZE using ioctl(LOOP_SET_BLOCK_SIZE, 32768), then mounting a romfs
filesystem on that device.
When sb_set_blocksize(sb, ROMBSIZE) is called with ROMBSIZE=4096 but the
device has logical_block_size=32768, bdev_validate_blocksize() fails
because the requested size is smaller than the device's logical block
size. sb_set_blocksize() returns 0 (failure), but romfs ignores this and
continues mounting.
The superblock's block size remains at the device's logical block size
(32768). Later, when sb_bread() attempts I/O with this oversized block
size, it triggers a kernel BUG in folio_set_bh():
kernel BUG at fs/buffer.c:1582!
BUG_ON(size > PAGE_SIZE);
Fix by checking the return value of sb_set_blocksize() and failing the
mount with -EINVAL if it returns 0. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: smscufx: properly copy ioctl memory to kernelspace
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: virtio - Add spinlock protection with virtqueue notification
When VM boots with one virtio-crypto PCI device and builtin backend,
run openssl benchmark command with multiple processes, such as
openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32
openssl processes will hangup and there is error reported like this:
virtio_crypto virtio0: dataq.0:id 3 is not a head!
It seems that the data virtqueue need protection when it is handled
for virtio done notification. If the spinlock protection is added
in virtcrypto_done_task(), openssl benchmark with multiple processes
works well. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()
On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is
freed via free_transport(), which does not decrement active_num_conn,
leaking this counter.
Replace free_transport() with ksmbd_tcp_disconnect(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: omap - Allocate OMAP_CRYPTO_FORCE_COPY scatterlists correctly
The existing allocation of scatterlists in omap_crypto_copy_sg_lists()
was allocating an array of scatterlist pointers, not scatterlist objects,
resulting in a 4x too small allocation.
Use sizeof(*new_sg) to get the correct object size. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset. |
| In the Linux kernel, the following vulnerability has been resolved:
can: etas_es58x: allow partial RX URB allocation to succeed
When es58x_alloc_rx_urbs() fails to allocate the requested number of
URBs but succeeds in allocating some, it returns an error code.
This causes es58x_open() to return early, skipping the cleanup label
'free_urbs', which leads to the anchored URBs being leaked.
As pointed out by maintainer Vincent Mailhol, the driver is designed
to handle partial URB allocation gracefully. Therefore, partial
allocation should not be treated as a fatal error.
Modify es58x_alloc_rx_urbs() to return 0 if at least one URB has been
allocated, restoring the intended behavior and preventing the leak
in es58x_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: omap-dma: fix dma_pool resource leak in error paths
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: fix kmemleak by releasing references to fault configfs items
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, the null-blk
driver sets up fault injection support by creating the timeout_inject,
requeue_inject, and init_hctx_fault_inject configfs items as children
of the top-level nullbX configfs group.
However, when the nullbX device is removed, the references taken to
these fault-config configfs items are not released. As a result,
kmemleak reports a memory leak, for example:
unreferenced object 0xc00000021ff25c40 (size 32):
comm "mkdir", pid 10665, jiffies 4322121578
hex dump (first 32 bytes):
69 6e 69 74 5f 68 63 74 78 5f 66 61 75 6c 74 5f init_hctx_fault_
69 6e 6a 65 63 74 00 88 00 00 00 00 00 00 00 00 inject..........
backtrace (crc 1a018c86):
__kmalloc_node_track_caller_noprof+0x494/0xbd8
kvasprintf+0x74/0xf4
config_item_set_name+0xf0/0x104
config_group_init_type_name+0x48/0xfc
fault_config_init+0x48/0xf0
0xc0080000180559e4
configfs_mkdir+0x304/0x814
vfs_mkdir+0x49c/0x604
do_mkdirat+0x314/0x3d0
sys_mkdir+0xa0/0xd8
system_call_exception+0x1b0/0x4f0
system_call_vectored_common+0x15c/0x2ec
Fix this by explicitly releasing the references to the fault-config
configfs items when dropping the reference to the top-level nullbX
configfs group. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak
In gs_can_open(), the URBs for USB-in transfers are allocated, added to the
parent->rx_submitted anchor and submitted. In the complete callback
gs_usb_receive_bulk_callback(), the URB is processed and resubmitted. In
gs_can_close() the URBs are freed by calling
usb_kill_anchored_urbs(parent->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in gs_can_close().
Fix the memory leak by anchoring the URB in the
gs_usb_receive_bulk_callback() to the parent->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: rockchip: inno-usb2: Fix a double free bug in rockchip_usb2phy_probe()
The for_each_available_child_of_node() calls of_node_put() to
release child_np in each success loop. After breaking from the
loop with the child_np has been released, the code will jump to
the put_child label and will call the of_node_put() again if the
devm_request_threaded_irq() fails. These cause a double free bug.
Fix by returning directly to avoid the duplicate of_node_put(). |
