Search

Search Results (428783 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-99481 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_vhci: Pin module for debugfs file operations An open debugfs file retains its file_operations pointer in the debugfs proxy state. However, force_suspend_fops, force_wakeup_fops, aosp_capable_fops, and force_devcoredump_fops have no .owner set to THIS_MODULE. As a result, full_proxy_open_regular() calls fops_get() which succeeds without taking a reference to the hci_vhci module. When userspace opens any of these debugfs files and later closes the /dev/vhci file descriptor (triggering vhci_release() and debugfs file removal), the open debugfs file descriptor remains valid in userspace. Because the module refcount was not incremented, the hci_vhci module can be unloaded via delete_module (rmmod hci_vhci). When the userspace process subsequently closes the debugfs file descriptor, full_proxy_release() accesses the already unmapped file_operations structure, resulting in a kernel page fault / oops: BUG: unable to handle page fault for address: fffffbfff846f18b #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP KASAN NOPTI RIP: 0010:full_proxy_release+0x8e/0x140 Call Trace: <TASK> __fput+0x39f/0xa60 fput_close_sync+0xff/0x200 __x64_sys_close+0x8c/0xf0 do_syscall_64+0xc3/0x590 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Modules linked in: ... [last unloaded: hci_vhci(E)] The issue was discovered via manual code audit of drivers/bluetooth/hci_vhci.c and verified on a Linux 7.3-rc6 test VM with CONFIG_BT_VHCI=m by keeping a debugfs file open across controller teardown and module unload. Set .owner = THIS_MODULE on all four file_operations structures so that debugfs pins the module until all file descriptors are closed.
CVE-2026-99482 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: ps: fix snd_acp63_remove() teardown ordering The ACP IRQ handlers dereference the SoundWire, SoundWire DMA, and PDM child platform devices, but snd_acp63_remove() unregisters them while the interrupt is still held by devres, which frees it only after remove returns. An interrupt in this window is a use-after-free. Mask the ACP interrupt sources and call devm_free_irq() before the first child device is unregistered. The masking goes through the new acp_hw_ops->disable_interrupts callback, keeping the remove path platform-agnostic. The interrupt line is shared, and acp_hw_deinit() clears the sources only after the children are gone, which would leave the line raised with no handler left to ack it. The window predates the tagged refactor, which only reshaped the dereferences. devm_free_irq() waits for in-flight handlers, but not for work the hardirq has already queued: acp63_irq_handler() schedules amd_sdw_irq_thread on the SoundWire manager. Draining that work in the manager's remove path is a soundwire-side change and follows separately. This issue was found by an in-house static analysis tool.
CVE-2026-99483 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: ALSA: pcmtest: handle multiple wraps in random capture fill The random capture helpers assume that the data generated for one timer tick wraps the DMA ring at most once. However, b_rw describes 200 ms of audio because the timer runs at 5 Hz, so it can be several times larger than a small ring. For 48 kHz, S16_LE, four-channel capture with a 512-frame buffer, the DMA ring is 4096 bytes while one tick generates 76800 bytes. After filling the 4096-byte tail, the existing code issues a second 72704-byte write from the ring base, writing 68608 bytes beyond the ring. Both interleaved and non-interleaved capture are affected. KASAN reports the first write into the adjacent free page as a use-after-free in the random-byte generator. The underlying defect is an out-of-bounds write from the live DMA ring, not a stale DMA allocation. Split each random write repeatedly at the interleaved ring or per-channel block boundary. Keep the hardware-pointer update exactly once after the complete logical write. The issue reproduced on three of three clean boots. With this change, the same vulnerable geometry completed six times without a sanitizer finding. Boundary, pattern-fill, no-timer, open/close, and module-reload controls also completed normally. snd-pcmtest is a test driver, and selecting random fill requires an administrator-controlled module parameter. The written values come from the kernel random generator; no privilege escalation or attacker-controlled write primitive was demonstrated.
CVE-2026-99486 1 Linux 2 Linux, Linux Kernel 2026-11-20 6.1 Medium
In the Linux kernel, the following vulnerability has been resolved: rust: configfs: fix data offset calculation for subsystem callbacks `get_group_data()` chooses between `Group::<Parent>::container_of()` and `Subsystem::<Parent>::container_of()` based on whether `this` represents the root group of a configfs subsystem. It detects this by checking `(*this).cg_subsys.is_null()`, but `link_group()` in `fs/configfs/dir.c` unconditionally sets `cg_subsys` for every `config_group` attached anywhere in a registered subsystem, including the subsystem's own `su_group`. The only `config_group` with a NULL `cg_subsys` is the configfs root, on which userspace cannot trigger callbacks. The check is therefore always false at runtime, and the `Subsystem` branch is dead. Subsystem-level callbacks reach the `Group` branch and may read `data` at the wrong offset. Thus change the `is_root` check to correctly identify whether a group is a root group by comparing `this` to `subsys.su_group`. [ Andreas: Fix clippy warning on 1.85.0 by moving safety comment. ]
CVE-2026-99487 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: rust: bug: pass TAINT_WARN to warn_slowpath_fmt() on UML On UML, `warn_flags!` calls `warn_slowpath_fmt()` directly. Its third argument is a taint number, but `warn_on!` passes its bug flags there. As a result, `add_taint()` gets 2304 instead of 9 (`TAINT_WARN`). The warning is not recorded: `/proc/sys/kernel/tainted` stays 0 after `warn_on!` fires, where it should be 512. It also causes an out-of-bounds write in `add_taint()`. Pass `TAINT_WARN` directly, as C does on UML.
CVE-2026-99731 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/filemap: don't lose a folio lock wakeup to a signal An exclusive waiter in folio_wait_bit_common() can leave the wait loop because of a fatal signal, then be woken by folio_unlock() before finish_wait(). If the waker did not hand over the lock, the waiter returns -EINTR without trying to acquire it. folio_wake_bit() stops after waking the first exclusive waiter, so this loses the wakeup and can leave other waiters asleep indefinitely on an unlocked folio. After finish_wait(), let a waiter woken without a lock handoff try once more to acquire the lock. If successful, return success so the caller's eventual unlock wakes the next waiter. Otherwise, the current lock owner will do so. Fix generated by an LLM and sent by Josef Bacik in private. [ david: clarify and simplify comment + description ]
CVE-2026-99737 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/shmem: fix truncate loop after boundary swapin failure If swapping in a large entry at the new EOF fails, shmem_undo_range() leaves the entry in place. Its final scan skips the entry, then restarts from the same start index and finds it again. Truncation can loop forever while holding i_rwsem. Advance start past the skipped entry so that a restarted scan can finish, as we already do for folios that cannot be split. Note that this does not fix the missing zeroing when boundary swapin fails, it merely prevents the endless loop.
CVE-2026-99738 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/shmem: preserve allocation errors when swapping in large entries shmem_swapin_folio() adjusts swap to the requested slot within a large swap entry before allocating a folio. If allocation or charging fails, the error path compares this adjusted value with the original entry still stored in the XArray in shmem_confirm_swap(). Unless the index is at the start of the entry, this turns -ENOMEM into -EEXIST even though nothing changed. The caller retries -EEXIST, so persistent allocation failures can leave the task spinning instead of returning the error. Restore swap to index_entry on allocation failure so the existing error path checks the original entry. This preserves the allocation error if the entry is unchanged and still retries if it changed concurrently.
CVE-2026-99740 1 Linux 2 Linux, Linux Kernel 2026-11-20 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: mm/shmem: stop retrying folios that cannot be split A fault or collapse can insert a large folio crossing EOF after shmem_undo_range() has handled the boundary folios. If splitting that folio fails, truncate_inode_partial_folio() retains it when it is dirty. The final scan then repeatedly finds it because it restarts from an unchanged start. Truncation keeps the inode lock and ignores fatal signals while looping. A concurrent unlink() can then block other directory operations while holding the directory lock and waiting for the file's lock. Advance start past the retained folio, whose truncated part has already been zeroed. Do not move start backwards if the failed split has shrunk the folio. Fix generated by an LLM and sent by Chris Mason in private. [ david: split fixes, simplify descriptions, adjust comments ]
CVE-2026-131018 1 Google 1 Chrome 2026-11-20 8.1 High
Confused deputy in DevTools in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to bypass web origin policy via a crafted HTML page. (Chromium security severity: Low)
CVE-2026-133608 1 Openzipkin 1 Zipkin 2026-11-20 5.3 Medium
A vulnerability was identified in OpenZipkin Zipkin 3.6.1. This affects the function UnzippingBytesRequestConverter.convertRequest of the file zipkin-server/src/main/java/zipkin2/server/internal/ZipkinHttpCollector.java of the component HTTP Collector. Such manipulation leads to highly compressed data. The attack can be executed remotely. The pull request to fix this issue awaits acceptance.
CVE-2026-132749 1 Vtiger 1 Vtiger Crm 2026-11-20 6.5 Medium
Vtiger CRM through 8.4.0 contains a blind SQL injection vulnerability in ReportRun::generateAdvFilterSql() that allows authenticated low-privileged users to inject SQL via the bw comparator. Attackers can send a crafted advanced_filter parameter containing a single quote to the Reports getRecordsCount action to break out of BETWEEN literals and extract database contents.
CVE-2026-132745 1 Vtiger 1 Vtiger Crm 2026-11-20 6.5 Medium
Vtiger CRM through 8.4.0 contains a blind SQL injection vulnerability that allows authenticated non-administrative users to inject SQL through the k (does not contain) comparator in list view search_params. Attackers can send crafted search_params to the ListAjax getRecordsCount mode, breaking out of the unescaped NOT LIKE clause to extract database contents via boolean or time-based techniques.
CVE-2026-132602 2 Seo Panel, Seopanel 2 Seo Panel, Seo Panel 2026-11-20 6.3 Medium
A vulnerability was detected in SEO Panel 6.0.0. This impacts an unknown function of the file controllers/siteauditor.ctrl.php of the component Site Auditor. Performing a manipulation of the argument order_col/order_val results in sql injection. The attack can be initiated remotely. The exploit is now public and may be used. Upgrading to version 7.0.0 will fix this issue. The patch is named 389783b5d8235f5637f4e4587f524b5fef07864d. The affected component should be upgraded.
CVE-2026-132610 1 Sourcecodester 1 Simple Form Builder Web App 2026-11-20 7.3 High
A security flaw has been discovered in SourceCodester Simple Form Builder Web App 1.0. The impacted element is the function save_form of the file /classes/Forms.php. Performing a manipulation of the argument form_code/form_data results in code injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.
CVE-2026-132625 1 Sourcecodester 1 Student Project Allocation And Management System 2026-11-20 7.3 High
A vulnerability was determined in SourceCodester Student Project Allocation and Management System 1.0. Affected is an unknown function of the file /login.php of the component Login Handler. Executing a manipulation of the argument username/password can lead to sql injection. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized.
CVE-2026-132128 2026-11-20 7.4 High
@fastify/middie is the middleware engine that adds Express and Connect style middleware support to Fastify. In versions up to and including 9.3.6, middie does not honor the router's caseSensitive setting and matches path-scoped middleware mount paths with a case-insensitive regular expression that does not fold non-ASCII characters, while Fastify's router, when caseSensitive is set to false, lowercases the request path with a Unicode-aware conversion that maps the KELVIN SIGN character (U+212A) to the ASCII letter k. A request that spells a k in a protected mount path as the percent-encoded KELVIN SIGN is therefore routed to the protected handler while the middleware mounted on that path, such as authentication, authorization, or rate limiting, never matches and is skipped, letting an unauthenticated client reach the handler. Only applications that set caseSensitive to false and protect a mount path containing the letter k are affected. The issue is fixed in @fastify/middie 9.3.7, and users should upgrade to 9.3.7 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after routing, or keep routing case-sensitive, which is the default.
CVE-2026-132133 2026-11-20 4.8 Medium
@fastify/middie is the middleware engine that adds Express and Connect style middleware support to Fastify. In versions up to and including 9.3.6, middie builds the match regular expression for each path-scoped middleware from its mount path without collapsing duplicate slashes, even when the application enables the ignoreDuplicateSlashes router option. Under that option Fastify's router collapses duplicate slashes in both the registered route and the request path, so a mount path containing a doubled slash is served by the router at its single-slash form while the middleware's compiled match still requires the doubled slash and never matches. A path-scoped middleware such as authentication, authorization, or rate limiting is therefore skipped while the router dispatches the request to the protected handler, without any authentication required. Applications are affected when they enable ignoreDuplicateSlashes and a middleware mount path reaches middie with a duplicate slash, most commonly when a plugin prefix that ends with a slash is joined to a mount path that starts with one. The issue is fixed in @fastify/middie 9.3.7, and users should upgrade to 9.3.7 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after routing, and avoid mount paths and plugin prefixes that introduce duplicate slashes.
CVE-2026-99488 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.1 Medium
In the Linux kernel, the following vulnerability has been resolved: klist: avoid accesses after waking klist_remove() klist_remove() waits until a node is unreferenced so that its caller can free the containing object. klist_release() currently publishes waiter->woken and wakes the waiter before its final accesses to the waiter and node. klist_remove() can then return, allowing its stack waiter and the containing object to be freed or reused while klist_release() is still running. In particular, bus_remove_driver() can free drv->p while __device_attach() walks the same bus klist with bus_for_each_drv(). On an arm64 Cortex-A72 system, an unpatched 7.2.0-rc3 kernel with CONFIG_PREEMPT_RT=y and CONFIG_KASAN=y reproduced the bug through the in-tree I2C/at24 path. KASAN reported a use-after-free in klist_dec_and_del() reached from klist_next()/bus_for_each_drv() while at24 was being unregistered. Clear n_klist and take a task reference before publishing woken. Use release/acquire accesses for that publication and wake the referenced task. The task reference keeps the waiter task alive if it returns and exits before wake_up_process().
CVE-2026-99489 1 Linux 2 Linux, Linux Kernel 2026-11-20 4.6 Medium
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Redesign shared sibling data lifecycle The Wacom driver coordinates state between sibling interfaces of the same physical device using a shared structure 'wacom_shared' inside 'wacom_hdev_data'. The driver kept a volatile representative pointer 'data->dev' pointing to a sibling 'hid_device' for physical path comparisons during sibling matching. This pointer management is fragile. When the representative device is disconnected, wacom_remove_shared_data() failed to clear/update 'data->dev', leading to a Use-After-Free vulnerability when subsequent sibling probes dereference the dangling 'data->dev' pointer. Resolve this issue by redesigning the sibling data lifecycle: - Eliminate the volatile 'data->dev' representative pointer completely - Redesign 'wacom_hdev_data' to store stable static copies of the required attributes upon first allocation: 'phys' path string, 'vendor', 'product' IDs and the sibling's 'device_type' - Use these static attributes for stable sibling matching in wacom_are_sibling() and wacom_get_hdev_data() This ensures sibling matching remains safe and stable even if individual siblings are dynamically added or removed. To secure the lifecycle against concurrent probe/disconnect races: - Switch kref_put() to kref_put_mutex() in wacom_remove_shared_data() to serialize refcount drops with list traversal and lookup - Modify wacom_release_shared_data() to assume the list lock is already held Also, do not accumulate the 'device_type' capability flag during subsequent sibling probes. Keeping only the first probed sibling's device_type exactly preserves the original sibling matching behavior without introducing side effects.