| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context
Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP
garbage-collection workqueue, rather than the NAPI poll context. For any
unmatched PTP entries carrying an SKB, it calls
mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For
ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end
of that function is the following:
skb->protocol = eth_type_trans(skb, skb->dev);
napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb);
The napi pointer is one that was placed in the SKB control block when the
trapped packet was received in the NAPI context. Later, when the GC reaps
the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to
napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe
if the poll is running concurrently on another CPU.
In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent
softirq processing, but this only applies to the local CPU. Additionally,
its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish()
invokes netif_receive_skb(). This has not been accurate since the
referenced commit; this patch makes that comment accurate again.
mlxsw_pci_napi_devs_init() calls netif_threaded_enable() on the NAPI RX
net_device without any conditions. The NAPI instance's poll, which may be
running concurrent to the GC, is running as an independently-scheduled
kthread which may be on a different CPU. The call to local_bh_disable()
does not guard against this.
If a tx-timestamp timeout produces an unmatched entry (which can be easily
reproduced by running ptp4l and waiting for a port to reach the
UNCALIBRATED/SLAVE state) while the owning NAPI thread is in the middle of
a poll on another CPU, both sides mutate the GRO list concurrently, as
shown below:
[39.846] port 1 (swp1): MASTER to UNCALIBRATED on RS_SLAVE
list_add corruption. next->prev should be prev (ffff8d620faf4138), but was ffff8d624150f700. (next=ffff8d620faf4138).
kernel BUG at lib/list_debug.c:29!
Oops: invalid opcode: 0000 [#1] SMP PTI
CPU: 1 UID: 0 PID: 539 Comm: napi/mlxsw_rx-0 Not tainted 6.18.48 #1-NixOS PREEMPT(lazy)
Hardware name: Mellanox Technologies Ltd. MSN2410/VMOD0001, BIOS 4.6.5 09/13/2018
RIP: 0010:__list_add_valid_or_report+0x79/0xb0
RSP: 0018:ffffcdf8c0f27c08 EFLAGS: 00010246
RAX: 0000000000000075 RBX: ffff8d624150fd00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8d6315d1e540
RBP: ffff8d620faf4070 R08: 0000000000000000 R09: 00000000ffffdfff
R10: ffffffffa5c60fe0 R11: ffffcdf8c0f27ab8 R12: 0000000000000003
R13: 000000000000003d R14: 00000000000001bc R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8d636f63f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562689a60c24 CR3: 000000015f224004 CR4: 00000000001726f0
Call Trace:
<TASK>
gro_receive_skb+0xee/0x230
mlxsw_sp1_ptp_got_packet+0x61/0x140 [mlxsw_spectrum]
mlxsw_core_skb_receive+0xdf/0x1b0 [mlxsw_core]
mlxsw_pci_napi_poll_cq_rx+0x780/0x9d0 [mlxsw_pci]
__napi_poll+0x31/0x1e0
napi_threaded_poll_loop+0x16b/0x1c0
napi_threaded_poll+0x71/0xa0
kthread+0xfb/0x260
ret_from_fork+0x22d/0x260
ret_from_fork_asm+0x1a/0x30
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
The machinery that leads to this kernel panic has not been changed between
6.18.48 and mainline.
This patch adds an ingress-delivery helper for the PTP packet_finish()
path that calls netif_receive_skb() instead of napi_gro_receive().
netif_receive_skb(), unlike napi_gro_receive(), can be called from outside
of the NAPI instance's poll context, which can occur at the call site for
this path. RX stats accounting and the skb->dev assignment are still
preserved; the only change is the delivery call itself.
This removes GR
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: zero extend the result of an arena 32-bit cmpxchg
bpf_convert_ctx_accesses() rewrites an atomic on an arena pointer from
BPF_STX | BPF_ATOMIC to BPF_STX | BPF_PROBE_ATOMIC, and it runs before
bpf_opt_subreg_zext_lo32_rnd_hi32().
That pass emits an explicit zero extension for a 32-bit cmpxchg even
when bpf_jit_needs_zext() is false. This is done because on some
architectures 32-bit cmpxchg requires explicit zero extension for the
dst register. E.g. on x86-64 'lock cmpxchg' does not change the %eax
if comparison is successful, while BPF semantics declare that each
operation on a 32-bit register zero extends it's upper half.
is_cmpxchg_insn() matches BPF_MODE == BPF_ATOMIC only, so an arena
cmpxchg misses said zero extension adjustment. This patch adjusts
is_cmpxchg_insn() to match BPF_PROBE_ATOMIC alongside BPF_ATOMIC. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: take commit root semaphore when iterating in mark_block_group_to_copy()
mark_block_group_to_copy() iterates over the commit root with
skip_locking=true. A concurrent transaction commit can swap and free
the commit root during iteration, causing use-after-free when
accessing extent buffers.
Fix it by using path->need_commit_sem to protect the commit root search. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: fs210x: fix possible buffer overflow
In fs210x_effect_scene_info(), a string was copied like this:
strscpy(DST, SRC, strlen(SRC) + 1);
A buffer overflow would happen if strlen(SRC) >= sizeof(DST).
Actually, strscpy() must be used this way:
strscpy(DST, SRC, sizeof(DST));
strscpy(DST, SRC); // defaults to sizeof(DST) |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Check BAR resources before exporting a DMABUF
A DMABUF exports access to BAR resources and, although they are
requested at startup time, we need to ensure they really were reserved
before exporting. Otherwise, it's possible to access unreserved
resources through the export.
Add a check to the DMABUF-creation path. |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix race between deleting interface and adding new peer
While deleting an existing ovpn interface, there is a very
narrow window where adding a new peer via netlink may cause
the netdevice to hang and prevent its unregistration.
It may happen during ovpn_dellink(), when all existing peers are
freed and the device is queued for deregistration, but a
CMD_PEER_NEW message comes in adding a new peer that takes again
a reference to the netdev.
At this point there is no way to release the device because we are
under the assumption that all peers were already released.
Fix the race condition by releasing all peers in ndo_uninit(),
when the netdevice has already been removed from the netdev
list.
Also ovpn_peer_add() has now an extra check that forces the
function to bail out if the device reg_state is not REGISTERED.
This way any incoming CMD_PEER_NEW racing with the interface
deletion routine will simply stop before adding the peer.
Note that the above check happens while holding the netdev_lock
to prevent racing netdev state changes.
ovpn_dellink() is now empty and can be removed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state
sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which
clears the logger pointer without an RCU grace period. Immediately after,
ops_free_list() frees the per-net state while concurrent packets might
still be executing nf_log_packet() under rcu_read_lock()."
Clear the pointer via .pre_exit to make sure rcu readers have completed
before pernet storage is free'd. The change in nf_log_syslog.c is only
done for consistency: it doesn't use pernet data. |
| In the Linux kernel, the following vulnerability has been resolved:
media: atomisp: gc2235: fix UAF and memory leak
gc2235_probe() handles its error paths incorrectly.
If media_entity_pads_init() fails, gc2235_remove() is called, which
tears down the subdev and frees dev, but then still falls through to
atomisp_register_i2c_module(). This results in use-after-free.
If atomisp_register_i2c_module() fails, the media entity and control
handler are left initialized and dev is leaked.
gc2235_remove() unconditionally calls media_entity_cleanup() and
v4l2_ctrl_handler_free(), but these are not initialized at every
error path in gc2235_probe().
Replace gc2235_remove() calls in the probe error paths with explicit
unwind labels that free only the resources initialized at each point
of failure, in reverse order of initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close()
acp6x_pdm_dma_close() does not free the runtime->private_data buffer
allocated in acp6x_pdm_dma_open(). Add the missing kfree. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Prevent shared tags across queues on Apple A11
On Apple A11, tags of pending commands must be unique across the admin
and IO queues, else the firmware crashes with
"duplicate tag error for tag N", with N being the tag.
Apply the existing workaround for M1 of reserving two tags for the admin
queue to A11. |
| In the Linux kernel, the following vulnerability has been resolved:
bluetooth/l2cap: sync sock recv cb and release
The problem occurs between the system call to close the sock and hci_rx_work,
where the former releases the sock and the latter accesses it without lock protection.
CPU0 CPU1
---- ----
sock_close hci_rx_work
l2cap_sock_release hci_acldata_packet
l2cap_sock_kill l2cap_recv_frame
sk_free l2cap_conless_channel
l2cap_sock_recv_cb
If hci_rx_work processes the data that needs to be received before the sock is
closed, then everything is normal; Otherwise, the work thread may access the
released sock when receiving data.
Add a chan mutex in the rx callback of the sock to achieve synchronization between
the sock release and recv cb.
Sock is dead, so set chan data to NULL, avoid others use invalid sock pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: pmem: keep PREFLUSH before data writes
pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the
bio data and can later overwrite the error with a successful REQ_FUA flush.
That lets data writes run after a failed preflush and can complete the bio
successfully despite the failed ordering barrier.
Run the REQ_PREFLUSH flush synchronously before touching the bio data and
complete the bio with the flush error if it fails. Keep asynchronous flush
chaining for REQ_FUA. At that point, data copy has completed and the parent
bio can wait for the chained flush bio. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: validate CLC firmware records
The CLC region is supplied by firmware, but the loader trusts the
region count and each record length. A malformed image can make the
region table pointer precede the firmware buffer, make the record loop
fail to advance, or index phy->clc past its end. Validate the table and
record bounds before dereferencing or copying. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp_async: drop the errored frame instead of resetting its headroom
ppp_receive_nonmp_frame() prepends a two-byte direction tag before running
the pass/active BPF filters:
*(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG);
Nothing on the receive path guarantees those two bytes of headroom. The
frame-error path in ppp_async's process_input_packet() resets a reused skb's
headroom to zero while claiming to restore it to a freshly allocated state -
but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD:
err:
if (skb) {
/* make skb appear as freshly allocated */
skb_trim(skb, 0);
skb_reserve(skb, - skb_headroom(skb));
}
ap->rpkt still points at that skb, so the next frame is reassembled into it
with no headroom at all. A peer that sends a bad-FCS frame followed by one
beginning ff 03 then leaves a single byte of headroom by the time the filter
tag is pushed, which lands one byte below skb->head:
skbuff: skb_under_panic: len:49 put:2 head:ffff888003c10000
data:ffff888003c0ffff tail:0x30 end:0x640 dev:<NULL>
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x13e/0x230
Call Trace:
skb_push+0xbd/0x100
ppp_receive_nonmp_frame+0x48a/0x1d10
ppp_input+0x4e9/0x2f80
ppp_async_process+0x2a/0xe0
tasklet_action_common+0x20f/0x8a0
handle_softirqs+0x18e/0x590
Kernel panic - not syncing: Fatal exception in interrupt
Zeroing the headroom violates the NET_SKB_PAD guarantee that dev_alloc_skb()
gives the rest of the receive path. Besides the filter panic above, when CCP
compression is enabled ppp_decompress_frame() hands skb->data - 2 to
->decompress()/->incomp(), which then reads out of bounds before skb->head
for the same reason.
Rather than restore the headroom, drop the errored frame - as ppp_synctty
already does on its error path - and clear ap->rpkt so the next frame is
reassembled into a fresh skb with proper headroom. This is simpler and fixes
both the filter under-panic and the CCP out-of-bounds read.
The original V1 of this patch made room in ppp_receive_nonmp_frame() with
skb_cow_head(); Eric pointed out that fixing the root cause in the transport
is the right approach.
Found by fuzzing the PPP receive path with a mutating peer on a pty; it is an
interesting (remote) DoS: root configures PPP, the peer supplies two crashing
frames. The reproducer (repro-ppp-skb.c, unchanged from v1) panics in about a
second, and returns cleanly with this applied. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Address potential out-of-bounds read in resp_worker()
Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the
owner went away")' fixes the scenario it was intended for by walking the
message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it
skipped over the bounds checking code that is included in decode_message().
This could lead to issues such as reading past the slab allocation's end,
infinite loops or kernel panics. For those issues to happen, a malformed
wire message is needed to be sent from the device.
Instead of duplicating the bounds checking code already present in
decode_message(), use the function inside resp_worker(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix -EIO cleanup order in queue_rq
On -EIO, the RDMA queue_rq path reports a host path error and then
still cleans up the command and unmaps the SQE DMA. The path error
helper completes the request, so that is double cleanup and DMA unmap
after the request is already complete.
Unmap the SQE first, then report the host path error. Skip the outer
command cleanup on that path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/cirrus-qemu: Validate BAR0 size during probe
The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate
framebuffer sizes. However, during PCI probe, the driver mapped BAR0
without verifying that its size matches `CIRRUS_VRAM_SIZE`.
If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the
mapped VRAM will be smaller than expected. Because validation checks assume
4 MB VRAM, framebuffers larger than the mapped memory can be created.
When the display plane is updated (e.g. during release),
`cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to
VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory
causes a supervisor write page fault:
BUG: unable to handle page fault for address: ffffc9000389c000
...
RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110
...
Call Trace:
<TASK>
iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline]
drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442
cirrus_primary_plane_helper_atomic_update+0x98a/0xb00
drivers/gpu/drm/tiny/cirrus-qemu.c:358
drm_atomic_helper_commit_planes+0x626/0xea0
drivers/gpu/drm/drm_atomic_helper.c:3038
drm_atomic_helper_commit_tail+0x60/0x510
drivers/gpu/drm/drm_atomic_helper.c:1989
commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074
drm_atomic_helper_commit+0xa77/0xb10
drivers/gpu/drm/drm_atomic_helper.c:2312
Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource
is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
actually armed. Take the association reference only when timer_reduce()
successfully starts a new timer, closing the race between checking the
timer state and rearming it.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it. |
