| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix Rx page leak on multi-buffer frames
The ice_put_rx_mbuf() function handles calling ice_put_rx_buf() for each
buffer in the current frame. This function was introduced as part of
handling multi-buffer XDP support in the ice driver.
It works by iterating over the buffers from first_desc up to 1 plus the
total number of fragments in the frame, cached from before the XDP program
was executed.
If the hardware posts a descriptor with a size of 0, the logic used in
ice_put_rx_mbuf() breaks. Such descriptors get skipped and don't get added
as fragments in ice_add_xdp_frag. Since the buffer isn't counted as a
fragment, we do not iterate over it in ice_put_rx_mbuf(), and thus we don't
call ice_put_rx_buf().
Because we don't call ice_put_rx_buf(), we don't attempt to re-use the
page or free it. This leaves a stale page in the ring, as we don't
increment next_to_alloc.
The ice_reuse_rx_page() assumes that the next_to_alloc has been incremented
properly, and that it always points to a buffer with a NULL page. Since
this function doesn't check, it will happily recycle a page over the top
of the next_to_alloc buffer, losing track of the old page.
Note that this leak only occurs for multi-buffer frames. The
ice_put_rx_mbuf() function always handles at least one buffer, so a
single-buffer frame will always get handled correctly. It is not clear
precisely why the hardware hands us descriptors with a size of 0 sometimes,
but it happens somewhat regularly with "jumbo frames" used by 9K MTU.
To fix ice_put_rx_mbuf(), we need to make sure to call ice_put_rx_buf() on
all buffers between first_desc and next_to_clean. Borrow the logic of a
similar function in i40e used for this same purpose. Use the same logic
also in ice_get_pgcnts().
Instead of iterating over just the number of fragments, use a loop which
iterates until the current index reaches to the next_to_clean element just
past the current frame. Unlike i40e, the ice_put_rx_mbuf() function does
call ice_put_rx_buf() on the last buffer of the frame indicating the end of
packet.
For non-linear (multi-buffer) frames, we need to take care when adjusting
the pagecnt_bias. An XDP program might release fragments from the tail of
the frame, in which case that fragment page is already released. Only
update the pagecnt_bias for the first descriptor and fragments still
remaining post-XDP program. Take care to only access the shared info for
fragmented buffers, as this avoids a significant cache miss.
The xdp_xmit value only needs to be updated if an XDP program is run, and
only once per packet. Drop the xdp_xmit pointer argument from
ice_put_rx_mbuf(). Instead, set xdp_xmit in the ice_clean_rx_irq() function
directly. This avoids needing to pass the argument and avoids an extra
bit-wise OR for each buffer in the frame.
Move the increment of the ntc local variable to ensure its updated *before*
all calls to ice_get_pgcnts() or ice_put_rx_mbuf(), as the loop logic
requires the index of the element just after the current frame.
Now that we use an index pointer in the ring to identify the packet, we no
longer need to track or cache the number of fragments in the rx_ring. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix race condition validating r_parent before applying state
Add validation to ensure the cached parent directory inode matches the
directory info in MDS replies. This prevents client-side race conditions
where concurrent operations (e.g. rename) cause r_parent to become stale
between request initiation and reply processing, which could lead to
applying state changes to incorrect directory inodes.
[ idryomov: folded a kerneldoc fixup and a follow-up fix from Alex to
move CEPH_CAP_PIN reference when r_parent is updated:
When the parent directory lock is not held, req->r_parent can become
stale and is updated to point to the correct inode. However, the
associated CEPH_CAP_PIN reference was not being adjusted. The
CEPH_CAP_PIN is a reference on an inode that is tracked for
accounting purposes. Moving this pin is important to keep the
accounting balanced. When the pin was not moved from the old parent
to the new one, it created two problems: The reference on the old,
stale parent was never released, causing a reference leak.
A reference for the new parent was never acquired, creating the risk
of a reference underflow later in ceph_mdsc_release_request(). This
patch corrects the logic by releasing the pin from the old parent and
acquiring it for the new parent when r_parent is switched. This
ensures reference accounting stays balanced. ] |
| In the Linux kernel, the following vulnerability has been resolved:
spi: microchip-core-qspi: stop checking viability of op->max_freq in supports_op callback
In commit 13529647743d9 ("spi: microchip-core-qspi: Support per spi-mem
operation frequency switches") the logic for checking the viability of
op->max_freq in mchp_coreqspi_setup_clock() was copied into
mchp_coreqspi_supports_op(). Unfortunately, op->max_freq is not valid
when this function is called during probe but is instead zero.
Accordingly, baud_rate_val is calculated to be INT_MAX due to division
by zero, causing probe of the attached memory device to fail.
Seemingly spi-microchip-core-qspi was the only driver that had such a
modification made to its supports_op callback when the per_op_freq
capability was added, so just remove it to restore prior functionality. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: always call ceph_shift_unused_folios_left()
The function ceph_process_folio_batch() sets folio_batch entries to
NULL, which is an illegal state. Before folio_batch_release() crashes
due to this API violation, the function ceph_shift_unused_folios_left()
is supposed to remove those NULLs from the array.
However, since commit ce80b76dd327 ("ceph: introduce
ceph_process_folio_batch() method"), this shifting doesn't happen
anymore because the "for" loop got moved to ceph_process_folio_batch(),
and now the `i` variable that remains in ceph_writepages_start()
doesn't get incremented anymore, making the shifting effectively
unreachable much of the time.
Later, commit 1551ec61dc55 ("ceph: introduce ceph_submit_write()
method") added more preconditions for doing the shift, replacing the
`i` check (with something that is still just as broken):
- if ceph_process_folio_batch() fails, shifting never happens
- if ceph_move_dirty_page_in_page_array() was never called (because
ceph_process_folio_batch() has returned early for some of various
reasons), shifting never happens
- if `processed_in_fbatch` is zero (because ceph_process_folio_batch()
has returned early for some of the reasons mentioned above or
because ceph_move_dirty_page_in_page_array() has failed), shifting
never happens
Since those two commits, any problem in ceph_process_folio_batch()
could crash the kernel, e.g. this way:
BUG: kernel NULL pointer dereference, address: 0000000000000034
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 172 UID: 0 PID: 2342707 Comm: kworker/u778:8 Not tainted 6.15.10-cm4all1-es #714 NONE
Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.10 12/08/2023
Workqueue: writeback wb_workfn (flush-ceph-1)
RIP: 0010:folios_put_refs+0x85/0x140
Code: 83 c5 01 39 e8 7e 76 48 63 c5 49 8b 5c c4 08 b8 01 00 00 00 4d 85 ed 74 05 41 8b 44 ad 00 48 8b 15 b0 >
RSP: 0018:ffffb880af8db778 EFLAGS: 00010207
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 0000000000000003
RDX: ffffe377cc3b0000 RSI: 0000000000000000 RDI: ffffb880af8db8c0
RBP: 0000000000000000 R08: 000000000000007d R09: 000000000102b86f
R10: 0000000000000001 R11: 00000000000000ac R12: ffffb880af8db8c0
R13: 0000000000000000 R14: 0000000000000000 R15: ffff9bd262c97000
FS: 0000000000000000(0000) GS:ffff9c8efc303000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000034 CR3: 0000000160958004 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
ceph_writepages_start+0xeb9/0x1410
The crash can be reproduced easily by changing the
ceph_check_page_before_write() return value to `-E2BIG`.
(Interestingly, the crash happens only if `huge_zero_folio` has
already been allocated; without `huge_zero_folio`,
is_huge_zero_folio(NULL) returns true and folios_put_refs() skips NULL
entries instead of dereferencing them. That makes reproducing the bug
somewhat unreliable. See
https://lore.kernel.org/20250826231626.218675-1-max.kellermann@ionos.com
for a discussion of this detail.)
My suggestion is to move the ceph_shift_unused_folios_left() to right
after ceph_process_folio_batch() to ensure it always gets called to
fix up the illegal folio_batch state. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix crash after fscrypt_encrypt_pagecache_blocks() error
The function move_dirty_folio_in_page_array() was created by commit
ce80b76dd327 ("ceph: introduce ceph_process_folio_batch() method") by
moving code from ceph_writepages_start() to this function.
This new function is supposed to return an error code which is checked
by the caller (now ceph_process_folio_batch()), and on error, the
caller invokes redirty_page_for_writepage() and then breaks from the
loop.
However, the refactoring commit has gone wrong, and it by accident, it
always returns 0 (= success) because it first NULLs the pointer and
then returns PTR_ERR(NULL) which is always 0. This means errors are
silently ignored, leaving NULL entries in the page array, which may
later crash the kernel.
The simple solution is to call PTR_ERR() before clearing the pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix list corruption after hardware restart
Since stations are recreated from scratch, all lists that wcids are added
to must be cleared before calling ieee80211_restart_hw.
Set wcid->sta = 0 for each wcid entry in order to ensure that they are
not added again before they are ready. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Fix memory leak in hws_action_get_shared_stc_nic error flow
When an invalid stc_type is provided, the function allocates memory for
shared_stc but jumps to unlock_and_out without freeing it, causing a
memory leak.
Fix by jumping to free_shared_stc label instead to ensure proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, Fix memory leak in hws_pool_buddy_init error path
In the error path of hws_pool_buddy_init(), the buddy allocator cleanup
doesn't free the allocator structure itself, causing a memory leak.
Add the missing kfree() to properly release all allocated memory. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: x86/aegis - Add missing error checks
The skcipher_walk functions can allocate memory and can fail, so
checking for errors is necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask()
ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to
ieee80211_iterate_stations_atomic(). Note in this case the iterator is
required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does
not follow it as it might sleep. Consequently below warning is seen:
BUG: sleeping function called from invalid context at wmi.c:304
Call Trace:
<TASK>
dump_stack_lvl
__might_resched.cold
ath11k_wmi_cmd_send
ath11k_wmi_set_peer_param
ath11k_mac_disable_peer_fixed_rate
ieee80211_iterate_stations_atomic
ath11k_mac_op_set_bitrate_mask.cold
Change to ieee80211_iterate_stations_mtx() to fix this issue.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: Fix error code in iwl_op_mode_dvm_start()
Preserve the error code if iwl_setup_deferred_work() fails. The current
code returns ERR_PTR(0) (which is NULL) on this path. I believe the
missing error code potentially leads to a use after free involving
debugfs. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd: pmf: Use device managed allocations
If setting up smart PC fails for any reason then this can lead to
a double free when unloading amd-pmf. This is because dev->buf was
freed but never set to NULL and is again freed in amd_pmf_remove().
To avoid subtle allocation bugs in failures leading to a double free
change all allocations into device managed allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix invalid access to memory
In ath12k_dp_rx_msdu_coalesce(), rxcb is fetched from skb and boolean
is_continuation is part of rxcb.
Currently, after freeing the skb, the rxcb->is_continuation accessed
again which is wrong since the memory is already freed.
This might lead use-after-free error.
Hence, fix by locally defining bool is_continuation from rxcb,
so that after freeing skb, is_continuation can be used.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-tcp: sanitize request list handling
Validate the request in nvme_tcp_handle_r2t() to ensure it's not part of
any list, otherwise a malicious R2T PDU might inject a loop in request
list processing. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix uprobe pte be overwritten when expanding vma
Patch series "Fix uprobe pte be overwritten when expanding vma".
This patch (of 4):
We encountered a BUG alert triggered by Syzkaller as follows:
BUG: Bad rss-counter state mm:00000000b4a60fca type:MM_ANONPAGES val:1
And we can reproduce it with the following steps:
1. register uprobe on file at zero offset
2. mmap the file at zero offset:
addr1 = mmap(NULL, 2 * 4096, PROT_NONE, MAP_PRIVATE, fd, 0);
3. mremap part of vma1 to new vma2:
addr2 = mremap(addr1, 4096, 2 * 4096, MREMAP_MAYMOVE);
4. mremap back to orig addr1:
mremap(addr2, 4096, 4096, MREMAP_MAYMOVE | MREMAP_FIXED, addr1);
In step 3, the vma1 range [addr1, addr1 + 4096] will be remap to new vma2
with range [addr2, addr2 + 8192], and remap uprobe anon page from the vma1
to vma2, then unmap the vma1 range [addr1, addr1 + 4096].
In step 4, the vma2 range [addr2, addr2 + 4096] will be remap back to the
addr range [addr1, addr1 + 4096]. Since the addr range [addr1 + 4096,
addr1 + 8192] still maps the file, it will take vma_merge_new_range to
expand the range, and then do uprobe_mmap in vma_complete. Since the
merged vma pgoff is also zero offset, it will install uprobe anon page to
the merged vma. However, the upcomming move_page_tables step, which use
set_pte_at to remap the vma2 uprobe pte to the merged vma, will overwrite
the newly uprobe pte in the merged vma, and lead that pte to be orphan.
Since the uprobe pte will be remapped to the merged vma, we can remove the
unnecessary uprobe_mmap upon merged vma.
This problem was first found in linux-6.6.y and also exists in the
community syzkaller:
https://lore.kernel.org/all/000000000000ada39605a5e71711@google.com/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix a use-after-free in r535_gsp_rpc_push()
The RPC container is released after being passed to r535_gsp_rpc_send().
When sending the initial fragment of a large RPC and passing the
caller's RPC container, the container will be freed prematurely. Subsequent
attempts to send remaining fragments will therefore result in a
use-after-free.
Allocate a temporary RPC container for holding the initial fragment of a
large RPC when sending. Free the caller's container when all fragments
are successfully sent.
[ Rebase onto Blackwell changes. - Danilo ] |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/pwrctrl: Cancel outstanding rescan work when unregistering
It's possible to trigger use-after-free here by:
(a) forcing rescan_work_func() to take a long time and
(b) utilizing a pwrctrl driver that may be unloaded for some reason
Cancel outstanding work to ensure it is finished before we allow our data
structures to be cleaned up.
[bhelgaas: tidy commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: copy_verifier_state() should copy 'loop_entry' field
The bpf_verifier_state.loop_entry state should be copied by
copy_verifier_state(). Otherwise, .loop_entry values from unrelated
states would poison env->cur_state.
Additionally, env->stack should not contain any states with
.loop_entry != NULL. The states in env->stack are yet to be verified,
while .loop_entry is set for states that reached an equivalent state.
This means that env->cur_state->loop_entry should always be NULL after
pop_stack().
See the selftest in the next commit for an example of the program that
is not safe yet is accepted by verifier w/o this fix.
This change has some verification performance impact for selftests:
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
---------------------------------- ---------------------------- --------- --------- -------------- ---------- ---------- -------------
arena_htab.bpf.o arena_htab_llvm 717 426 -291 (-40.59%) 57 37 -20 (-35.09%)
arena_htab_asm.bpf.o arena_htab_asm 597 445 -152 (-25.46%) 47 37 -10 (-21.28%)
arena_list.bpf.o arena_list_del 309 279 -30 (-9.71%) 23 14 -9 (-39.13%)
iters.bpf.o iter_subprog_check_stacksafe 155 141 -14 (-9.03%) 15 14 -1 (-6.67%)
iters.bpf.o iter_subprog_iters 1094 1003 -91 (-8.32%) 88 83 -5 (-5.68%)
iters.bpf.o loop_state_deps2 479 725 +246 (+51.36%) 46 63 +17 (+36.96%)
kmem_cache_iter.bpf.o open_coded_iter 63 59 -4 (-6.35%) 7 6 -1 (-14.29%)
verifier_bits_iter.bpf.o max_words 92 84 -8 (-8.70%) 8 7 -1 (-12.50%)
verifier_iterating_callbacks.bpf.o cond_break2 113 107 -6 (-5.31%) 12 12 +0 (+0.00%)
And significant negative impact for sched_ext:
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
----------------- ---------------------- --------- --------- -------------------- ---------- ---------- ------------------
bpf.bpf.o lavd_init 7039 14723 +7684 (+109.16%) 490 1139 +649 (+132.45%)
bpf.bpf.o layered_dispatch 11485 10548 -937 (-8.16%) 848 762 -86 (-10.14%)
bpf.bpf.o layered_dump 7422 1000001 +992579 (+13373.47%) 681 31178 +30497 (+4478.27%)
bpf.bpf.o layered_enqueue 16854 71127 +54273 (+322.02%) 1611 6450 +4839 (+300.37%)
bpf.bpf.o p2dq_dispatch 665 791 +126 (+18.95%) 68 78 +10 (+14.71%)
bpf.bpf.o p2dq_init 2343 2980 +637 (+27.19%) 201 237 +36 (+17.91%)
bpf.bpf.o refresh_layer_cpumasks 16487 674760 +658273 (+3992.68%) 1770 65370 +63600 (+3593.22%)
bpf.bpf.o rusty_select_cpu 1937 40872 +38935 (+2010.07%) 177 3210 +3033 (+1713.56%)
scx_central.bpf.o central_dispatch 636 2687 +2051 (+322.48%) 63 227 +164 (+260.32%)
scx_nest.bpf.o nest_init 636 815 +179 (+28.14%) 60 73 +13 (+21.67%)
scx_qmap.bpf.o qmap_dispatch
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but
we may have scheduled task work via io_uring_cmd_complete_in_task() for
dispatching request, then kernel crash can be triggered.
Fix it by not trying to canceling the command if ublk block request is
started. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: prevent hang on link training fail
[Why]
When link training fails, the phy clock will be disabled. However, in
enable_streams, it is assumed that link training succeeded and the
mux selects the phy clock, causing a hang when a register write is made.
[How]
When enable_stream is hit, check if link training failed. If it did, fall
back to the ref clock to avoid a hang and keep the system in a recoverable
state. |
