| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: hold cl_lock in client_has_openowners()
client_has_openowners() walks clp->cl_openowners and reads so_stateids
without clp->cl_lock. nfs4_put_stateowner() unhashes that openowner under
cl_lock and then frees it, so a concurrent EXCHANGE_ID with mismatched
creds can use-after-free the nfs4_openowner.
BUG: KASAN: slab-use-after-free in client_has_state+0x10a/0x140
fs/nfsd/nfs4state.c:3718 client_has_openowners()
nfsd4_exchange_id
nfsd4_proc_compound
nfsd_dispatch
svc_process
Take clp->cl_lock while client_has_openowners() walks the openowner
list. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix overflow in dacloffset bounds check in build_sec_desc()
When the large dacl_offset is provided, dacl_offset + sizeof(struct
smb_acl) overflows on 32-bit builds and the check is passed,
Which makes le16_to_cpu(ppdacl_ptr->size) read out-of-bounds. This
only happens for dacl_offset in range [0xFFFFFFF8, 0xFFFFFFFF]. So
the oob read is max 8 bytes preceding the allocated ppntsd.
unsigned int dacl_offset = le32_to_cpu(ppntsd->dacloffset);
int ppdacl_size, ntacl_size = ppntsd_size - dacl_offset;
if (!dacl_offset ||
(dacl_offset + sizeof(struct smb_acl) > ppntsd_size))
goto out;
Commit beff0bc9d69b ("ksmbd: fix overflow in dacloffset bounds check")
fixes similar checks in other functions. But leaves this one out,
because it is only valid for 32-bit builds.
Reproduced on 32-bit ARM with KASAN, by a client sending SMB2
SET_INFO(SEC) with dacloffset=0xfffffff8, then QUERY_INFO(SEC) on the
same file:
BUG: KASAN: slab-out-of-bounds in build_sec_desc (fs/smb/server/smbacl.c:1105)
Read of size 2 at addr c2a273fa by task kworker/1:1/35
CPU: 1 UID: 0 PID: 35 Comm: kworker/1:1 Not tainted 7.3.0-rc2+ #5
Workqueue: ksmbd-io handle_ksmbd_work
Call trace:
kasan_check_range from build_sec_desc (fs/smb/server/smbacl.c:1105)
build_sec_desc from smb2_query_info (fs/smb/server/smb2pdu.c:7676)
smb2_query_info from handle_ksmbd_work (fs/smb/server/server.c:160)
handle_ksmbd_work from process_one_work (kernel/workqueue.c:3401)
process_one_work from worker_thread (kernel/workqueue.c:3473)
worker_thread from kthread (kernel/kthread.c:436)
Add overflow check. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: reject mdsmaps that claim more than CEPH_MAX_MDS ranks
check_new_map() sizes its export-target bitmap from CEPH_MAX_MDS but walks
it with newmap->possible_max_rank, which comes straight off the wire:
ceph_mdsmap_decode() sets it to max(m_num_active_mds, m_max_mds), then
overwrites it with the size of the "in" set. Neither is bounded by
CEPH_MAX_MDS, only by m_info allocating, so a monitor announcing more ranks
than the bitmap holds makes test_bit() read past the end of targets[]. The
clear_bit() loop above indexes the same bitmap, though it is additionally
bounded by mdsc->max_sessions. The map arrives on the monitor connection,
which is unauthenticated in legacy msgr mode.
CEPH_MAX_MDS is a protocol constant from src/mds/mdstypes.h, and the
reserved inode ranges in super.h are laid out one rank apart over that
span, so a map claiming more ranks is corrupt. Reject it where the rank
space is established rather than letting the count reach check_new_map().
BUG: KASAN: stack-out-of-bounds in check_new_map (fs/ceph/mds_client.c:5968)
Read of size 8 at addr ffffc90000ac7798 by task kworker/1:2/127
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
kasan_check_range (mm/kasan/generic.c:186 mm/kasan/generic.c:200)
check_new_map (fs/ceph/mds_client.c:5968)
ceph_mdsc_handle_mdsmap (fs/ceph/mds_client.c:7060)
extra_mon_dispatch (fs/ceph/super.c:802)
mon_dispatch (net/ceph/mon_client.c:1483)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
The buggy address belongs to stack of task kworker/1:2/127
and is located at offset 288 in frame:
check_new_map (fs/ceph/mds_client.c:5846)
This frame has 1 object:
[32, 288) 'targets' |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use
dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and
rebuilds it, but fbcon holds raw pointers into that list in
fb_display[i].mode and nothing un-publishes them the way
do_unregister_framebuffer() and store_modes() do with
fbcon_delete_modelist(). The function does refuse to install a new mode
while the framebuffer has users (dlfb->fb_count != 0), but only after the
list is already destroyed. Reached from the 0666 "edid" sysfs attribute,
an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with
-EINVAL and still leaves every fb_display[i].mode dangling; the next
console switch reads the freed fb_videomode in fb_videomode_to_var().
Test fb_count before touching the list. fbcon takes a reference through
fbcon_open(), so that condition covers exactly the states in which
fb_display[] points into the list, and the errno returned to userspace is
unchanged.
BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47
Workqueue: events console_callback
Call Trace:
fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905)
display_to_var (drivers/video/fbdev/core/fbcon.c:998)
fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182)
redraw_screen (drivers/tty/vt/vt.c:994)
complete_change_console (drivers/tty/vt/vt_ioctl.c:1141)
console_callback (drivers/tty/vt/vt.c:3358)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 28 bytes inside of
freed 96-byte region [ffff8880107b4480, ffff8880107b44e0) |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: fix integer overflow in the snap trace bounds check
ceph_update_snap_trace() bounds the two encoded snapid arrays that follow a
struct ceph_mds_snap_realm with sizeof(u64) * (num_snaps +
num_prior_parent_snaps). Both counts come straight off the wire as __le32,
so the addition is evaluated in unsigned int and wraps before sizeof(u64)
promotes it to size_t: an MDS sending num_snaps = 1 and
num_prior_parent_snaps = 0xffffffff makes the sum zero and the check
degenerates to ceph_decode_need(&p, e, 0, bad), which always passes.
dup_array() then reads num_snaps * 8 bytes past the end of the message
front, which ceph_msg_new2() allocates at exactly front_len bytes. An
unsolicited CEPH_MSG_CLIENT_SNAP reaches this from a malicious or
compromised MDS with no client-side action, as do the snaptraces carried in
an MDS reply and in a cap import.
Compute the length with size_add()/size_mul() so it saturates at SIZE_MAX
instead of wrapping, in the style fs/ceph/mdsmap.c already uses for
num_export_targets.
BUG: KASAN: slab-out-of-bounds in dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
Read of size 8 at addr ffff8880102a16c8 by task kworker/1:2/129
Workqueue: ceph-msgr ceph_con_workfn
Call Trace:
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dup_array (include/linux/unaligned.h:28 fs/ceph/snap.c:500)
ceph_update_snap_trace (fs/ceph/snap.c:836)
ceph_handle_snap (fs/ceph/snap.c:1155)
mds_dispatch (fs/ceph/mds_client.c:7234)
ceph_con_process_message (net/ceph/messenger.c:1424)
ceph_con_v1_try_read (net/ceph/messenger_v1.c:1430)
ceph_con_workfn (net/ceph/messenger.c:1576)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
...
The buggy address is located 0 bytes to the right of
allocated 72-byte region [ffff8880102a1680, ffff8880102a16c8) |
| In the Linux kernel, the following vulnerability has been resolved:
media: em28xx: fix double free in em28xx_alloc_urbs
When allocation of usb_bufs->buf[i] fails, em28xx_alloc_urbs()
explicitly frees all items within usb_bufs->buf before calling
em28xx_uninit_usb_xfer(), which also frees these items, causing them to be
freed twice.
BUG: KASAN: double-free in usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96)
Free of addr ffff88802fd37c00 by task kworker/1:2/1182
Workqueue: events request_module_async
Call Trace:
kasan_report_invalid_free (mm/kasan/report.c:557)
check_slab_allocation (mm/kasan/common.c:235)
kfree (./include/linux/kasan.h:199 (discriminator 1) mm/slub.c:2693 (discriminator 1) mm/slub.c:6508 (discriminator 1) mm/slub.c:6801 (discriminator 1))
usb_free_urb.part.0 (drivers/usb/core/urb.c:25 ./include/linux/kref.h:65 drivers/usb/core/urb.c:96)
usb_free_urb (drivers/usb/core/urb.c:95)
em28xx_uninit_usb_xfer (drivers/media/usb/em28xx/em28xx-core.c:964)
em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1076)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Allocated by task 1182:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
__kmalloc_noprof (./include/linux/kasan.h:263 mm/slub.c:5414 mm/slub.c:5439)
em28xx_alloc_urbs (./include/linux/slab.h:995 ./include/linux/slab.h:1312 drivers/media/usb/em28xx/em28xx-core.c:1081)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Freed by task 1182:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2748 mm/slub.c:6508 mm/slub.c:6801)
em28xx_alloc_urbs (drivers/media/usb/em28xx/em28xx-core.c:1084)
em28xx_dvb_init (drivers/media/usb/em28xx/em28xx-dvb.c:1734 drivers/media/usb/em28xx/em28xx-dvb.c:1698)
em28xx_init_extension (drivers/media/usb/em28xx/em28xx-core.c:1248)
request_module_async (drivers/media/usb/em28xx/em28xx-cards.c:3685)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
Remove the explicit cleanup loop and let em28xx_uninit_usb_xfer()
handle the cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound mon_command ack decode to front len
handle_command_ack() bounds the decode with msg->front_alloc_len, the size
of the reply buffer, instead of msg->front.iov_len, the number of bytes the
monitor sent. mon_alloc_msg() routes every CEPH_MSG_MON_COMMAND_ACK to
get_generic_reply(), which returns the preallocated ->reply of whichever
generic request carries the same tid, so the buffer keeps its fixed size
however short the reply is. An ack with hdr.front_len below sizeof(struct
ceph_mon_request_header) + sizeof(u32), including 0, still passes
ceph_decode_need(), and ceph_decode_32() returns four bytes that were never
received: uninitialized slab memory, stale bytes of an earlier message, or
bytes the peer planted by sending a reply that lands in the same buffer and
is then rejected. The read stays within the allocation, so KASAN does not
flag it.
req->result reaches userspace through ceph_monc_do_statfs(),
ceph_monc_get_version() and ceph_monc_blocklist_add(); rbd hands it back
from write() on /sys/bus/rbd/add_single_major, and rbd_get_client() passes
it to ERR_PTR() unchecked, which faults:
rbd: failed to get latest osdmap: -186318427
BUG: unable to handle page fault for address: fffffbfffe9ca034
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:do_rbd_add (drivers/block/rbd.c:7105)
Call Trace:
...
kernfs_fop_write_iter (fs/kernfs/file.c:345)
vfs_write (fs/read_write.c:595 fs/read_write.c:687)
ksys_write (fs/read_write.c:739)
do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Kernel panic - not syncing: Fatal exception
Use msg->front.iov_len, matching handle_subscribe_ack(),
handle_statfs_reply(), handle_get_version_reply() and handle_auth_reply().
A well-formed ack has front.iov_len >= 22 and is unaffected; a short one
takes the existing bad: path. This applies commit d3c32939fa0e ("libceph:
bound get_version reply decode to front len") to the last decode-side
use of front_alloc_len in this file. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: stop processing a read response after a receive error
cifs_read_iter_from_socket() may call cifs_reconnect() before returning an
error. The reconnect path aborts pending mids and invokes their callbacks.
The callback can then release the cifs_io_subrequest containing rdata.
cifs_readv_receive() nevertheless continues after a negative return and may
dereference rdata in cifs_readv_discard(). KASAN reports the resulting
UAF:
BUG: KASAN: slab-use-after-free in cifs_readv_receive
Read of size 4 by task cifsd
cifs_readv_receive (fs/smb/client/transport.c:1284)
cifs_demultiplex_thread (fs/smb/client/connect.c:1355)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Freed by task 148:
netfs_put_subrequest (fs/netfs/objects.c:267)
netfs_read_collection (fs/netfs/read_collect.c:460)
netfs_wait_for_in_progress (fs/netfs/misc.c:462)
Return the socket error immediately, as this path did before the iterator
conversion. This also avoids adding a negative length to total_read. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix slab-out-of-bounds write in id_mode_to_cifs_acl()
In id_mode_to_cifs_acl(), while the chown branch reserves
sizeof(struct smb_ntsd) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_acl) and the worst-case ACE space after
commit 0ee150794c75 ("smb: client: fix heap overflow in DACL owner/group
rewrite")), the chmod branch only adds 2 * sizeof(struct smb_ace) or
5 * sizeof(struct smb_ace) to secdesclen (or 1 * sizeof(struct smb_ace)
on posix).
However, the chmod branch also invokes build_sec_desc() ->
copy_sec_desc(), which unconditionally writes the Owner SID at
pnntsd + sidsoffset and the Group SID at
pnntsd + sidsoffset + sizeof(struct smb_sid) (2 * 68 = 136 bytes total),
and set_chmod_dacl() always writes a struct smb_acl header (8 bytes)
even when the source descriptor has dacloffset == 0. When a security
descriptor has compact or overlapping Owner/Group SIDs (or
dacloffset == 0), calling chmod() under-allocates pnntsd and writes past
the end of the slab buffer.
Reserve sizeof(struct smb_acl) + 2 * sizeof(struct smb_sid) (plus
sizeof(struct smb_ntsd) on the posix path) in the chmod branch of
id_mode_to_cifs_acl(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SMB2 CREATE response buffer overflow
smb2_allocate_rsp_buf() uses the MAX_CIFS_SMALL_BUFFER_SIZE
(448-byte) buffer for a single SMB2_CREATE response. That buffer also
holds a 4-byte length field, which only leaves 444 bytes for the SMB2
body.
The AAPL response made this buffer too small. After 8f1b796ff113, a
request with AAPL response contexts may need at least 456 bytes. In
the 456-byte case, create_aapl_rsp_buf() is appended last, clears 128
bytes, and writes 12 bytes past the allocation.
KASAN reports:
BUG: KASAN: slab-out-of-bounds in create_aapl_rsp_buf+0x31/0x6e0
Write of size 128 at addr ffff88800370954c by task kworker/0:0/9
...
create_aapl_rsp_buf+0x31/0x6e0
smb2_open+0x58f9/0xef10
...
smb2_allocate_rsp_buf+0x19d/0x370
...
The buggy address is located 332 bytes inside of
allocated 448-byte region [ffff888003709400, ffff8880037095c0)
Reserve enough space for any fixed CREATE response KSMBD can build.
Store the required allocation size in the per-dialect values table.
This keeps the small buffer for other commands and avoids using the max
transaction buffer for every CREATE. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free after a failed durable reconnect
ksmbd_reopen_durable_fd() republishes a detached durable handle in the
reconnecting session's file table and takes no reference for that entry.
If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to
remove the volatile id.
Two reconnects of the same handle can both take a lookup reference before
either attaches it. If the one that reopens first then fails and drops
its references first, the other request makes the final put through
ksmbd_put_durable_fd(). That frees the handle without removing the first
session's table entry, so tearing that session down writes to freed
memory.
BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd]
Call Trace:
__close_file_table_ids+0x14d/0x740 [ksmbd]
ksmbd_destroy_file_table+0x76/0x100 [ksmbd]
ksmbd_session_destroy+0xf8/0x480 [ksmbd]
ksmbd_dispose_sessions+0x13e/0x200 [ksmbd]
ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd]
Freed by task 1030:
__ksmbd_close_fd+0x97d/0x1000 [ksmbd]
smb2_open+0x14eb/0xd9f0 [ksmbd]
Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file
lifetime") handles a final put made by the reconnecting request, but not
one made by another holder.
Remove the volatile id under the file-table lock on this error path,
before the references are dropped, as ksmbd_close_fd() does on the
request_open path just above. Removal then no longer depends on which
holder makes the final put. The stale comment in the reconnect cleanup
is updated to match. A successful reconnect is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix app-instance non-durable supersede session UAF
ksmbd_close_fd_app_instance_id() supersedes a prior open that has the
same AppInstanceId. It reaches that open's session through opinfo->sess.
This pointer is not refcounted.
Session teardown detaches durable handles before it frees the session.
It does not detach a non-durable open. That open still points at the
session through opinfo->sess after the session is freed. Another session
can supersede the open at the same time. The supersede then takes a
write lock through the stale pointer, in the freed session's file table.
BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0
Call Trace:
_raw_write_lock+0x71/0xd0
ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd]
smb2_open+0x3e10/0xd910 [ksmbd]
Freed by task 212:
ksmbd_session_destroy+0x38d/0x480 [ksmbd]
Fix this by looking the session up by opinfo->session_id. The lookup
returns a reference, as smb2_break_collect_channels() does. Recheck that
opinfo->sess still points at it before using it.
Do the lookup without m_lock held. destroy_previous_session() takes
m_lock under the session table lock, and taking them in the other order
here would deadlock. |
| Incorrect authorization in SurfaceCapture in Google Chrome prior to 158.0.8127.36 allowed a remote attacker leveraging social engineering to obtain sensitive information via a crafted Chrome extension. (Chromium security severity: Low) |
| Incorrect authorization in Extensions in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to obtain sensitive information via a crafted HTML page. (Chromium security severity: Low) |
| Use after free in V8 in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Use after free in Payments in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Improper input validation in ChromeDriver in Google Chrome prior to 158.0.8127.36 allowed a remote attacker who had compromised the renderer process to obtain sensitive information via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in Mojo in Google Chrome on on Windows prior to 158.0.8127.36 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: High) |
| Incorrect authorization in UI in Google Chrome prior to 158.0.8127.36 allowed a remote attacker who had compromised the renderer process to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Missing authorization in Layout in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |