| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
e1000/e1000e: Fix leak in DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented after a successful mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping would leak.
In these commits, a faulty while condition caused an infinite loop in
dma_error:
Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e
driver")
Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver")
Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of
unsigned in *_tx_map()") fixed the infinite loop, but introduced the
off-by-one error.
This issue may still exist in the igbvf driver, but I did not address it
in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix memory allocation in nvme_pr_read_keys()
nvme_pr_read_keys() takes num_keys from userspace and uses it to
calculate the allocation size for rse via struct_size(). The upper
limit is PR_KEYS_MAX (64K).
A malicious or buggy userspace can pass a large num_keys value that
results in a 4MB allocation attempt at most, causing a warning in
the page allocator when the order exceeds MAX_PAGE_ORDER.
To fix this, use kvzalloc() instead of kzalloc().
This bug has the same reasoning and fix with the patch below:
https://lore.kernel.org/linux-block/20251212013510.3576091-1-kartikey406@gmail.com/
Warning log:
WARNING: mm/page_alloc.c:5216 at __alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216, CPU#1: syz-executor117/272
Modules linked in:
CPU: 1 UID: 0 PID: 272 Comm: syz-executor117 Not tainted 6.19.0 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:__alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216
Code: ff 83 bd a8 fe ff ff 0a 0f 86 69 fb ff ff 0f b6 1d f9 f9 c4 04 80 fb 01 0f 87 3b 76 30 ff 83 e3 01 75 09 c6 05 e4 f9 c4 04 01 <0f> 0b 48 c7 85 70 fe ff ff 00 00 00 00 e9 8f fd ff ff 31 c0 e9 0d
RSP: 0018:ffffc90000fcf450 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1ffff920001f9ea0
RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0
RBP: ffffc90000fcf648 R08: ffff88800b6c3380 R09: 0000000000000001
R10: ffffc90000fcf840 R11: ffff88807ffad280 R12: 0000000000000000
R13: 0000000000040dc0 R14: 0000000000000001 R15: ffffc90000fcf620
FS: 0000555565db33c0(0000) GS:ffff8880be26c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000000c CR3: 0000000003b72000 CR4: 00000000000006f0
Call Trace:
<TASK>
alloc_pages_mpol+0x236/0x4d0 mm/mempolicy.c:2486
alloc_frozen_pages_noprof+0x149/0x180 mm/mempolicy.c:2557
___kmalloc_large_node+0x10c/0x140 mm/slub.c:5598
__kmalloc_large_node_noprof+0x25/0xc0 mm/slub.c:5629
__do_kmalloc_node mm/slub.c:5645 [inline]
__kmalloc_noprof+0x483/0x6f0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
nvme_pr_read_keys+0x8f/0x4c0 drivers/nvme/host/pr.c:245
blkdev_pr_read_keys block/ioctl.c:456 [inline]
blkdev_common_ioctl+0x1b71/0x29b0 block/ioctl.c:730
blkdev_ioctl+0x299/0x700 block/ioctl.c:786
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x1bf/0x220 fs/ioctl.c:583
x64_sys_call+0x1280/0x21b0 mnt/fuzznvme_1/fuzznvme/linux-build/v6.19/./arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x71/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fb893d3108d
Code: 28 c3 e8 46 1e 00 00 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffff61f2f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffff61f3138 RCX: 00007fb893d3108d
RDX: 0000000020000040 RSI: 00000000c01070ce RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffff61f3138
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffff61f3128 R14: 00007fb893dae530 R15: 0000000000000001
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
X.509: Fix out-of-bounds access when parsing extensions
Leo reports an out-of-bounds access when parsing a certificate with
empty Basic Constraints or Key Usage extension because the first byte of
the extension is read before checking its length. Fix it.
The bug can be triggered by an unprivileged user by submitting a
specially crafted certificate to the kernel through the keyrings(7) API.
Leo has demonstrated this with a proof-of-concept program responsibly
disclosed off-list. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check
cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE
entries fit within the skb. The first check correctly accounts for
ndpoffset:
if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len)
but the second check omits it:
if ((sizeof(struct usb_cdc_ncm_ndp16) +
ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len)
This validates the DPE array size against the total skb length as if
the NDP were at offset 0, rather than at ndpoffset. When the NDP is
placed near the end of the NTB (large wNdpIndex), the DPE entries can
extend past the skb data buffer even though the check passes.
cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating
the DPE array.
Add ndpoffset to the nframes bounds check and use struct_size_t() to
express the NDP-plus-DPE-array size more clearly. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: add missing syscalls to read class
The "at" variant of getxattr() and listxattr() are missing from the
audit read class. Calling getxattrat() or listxattrat() on a file to
read its extended attributes will bypass audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds missing syscalls to the audit read class. |
| NLnet Labs Unbound up to and including version 1.25.0 has a vulnerability when handling replies with very large RRsets that Unbound needs to perform name compression for. Malicious upstream responses with very large RRsets with records that don't share a suffix above the root can cause Unbound to spend a considerable time applying name compression to downstream replies. This can lead to degraded performance and eventually denial of service in well orchestrated attacks. An adversary can exploit the vulnerability by querying Unbound for the specially crafted contents of a malicious zone with very large RRsets. Before Unbound replies to the query it will try to apply name compression which was an unbounded operation that could lock the CPU until the whole packet was complete. A compression limit was introduced in 1.21.1 for this but it didn't account for the case where records would not share any suffix above the root. That causes Unbound to go in a different code path because of the compression tree lookup failure and eventually not increment the compression counter for those operations. Unbound 1.25.1 contains a patch with a fix that increments the compression counter regardless of the compression tree lookup. This is a complement fix to CVE-2024-8508. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix overflow when accumulating packets
Add a check to ensure that `x25_sock.fraglen` does not overflow.
The `fraglen` also needs to be resetted when purging `fragment_queue` in
`x25_clear_queues()`. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: sps30_i2c: fix buffer size in sps30_i2c_read_meas()
sizeof(num) evaluates to sizeof(size_t) (8 bytes on 64-bit) instead
of the intended __be32 element size (4 bytes). Use sizeof(*meas) to
correctly match the buffer element type. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: class: cdc-wdm: fix reordering issue in read code path
Quoting the bug report:
Due to compiler optimization or CPU out-of-order execution, the
desc->length update can be reordered before the memmove. If this
happens, wdm_read() can see the new length and call copy_to_user() on
uninitialized memory. This also violates LKMM data race rules [1].
Fix it by using WRITE_ONCE and memory barriers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations. |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier are affected by a Dependency on Vulnerable Third-Party Component vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read
The q54sj108a2_debugfs_read function suffers from a stack buffer overflow
due to incorrect arguments passed to bin2hex(). The function currently
passes 'data' as the destination and 'data_char' as the source.
Because bin2hex() converts each input byte into two hex characters, a
32-byte block read results in 64 bytes of output. Since 'data' is only
34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end
of the buffer onto the stack.
Additionally, the arguments were swapped: it was reading from the
zero-initialized 'data_char' and writing to 'data', resulting in
all-zero output regardless of the actual I2C read.
Fix this by:
1. Expanding 'data_char' to 66 bytes to safely hold the hex output.
2. Correcting the bin2hex() argument order and using the actual read count.
3. Using a pointer to select the correct output buffer for the final
simple_read_from_buffer call. |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier are affected by a Dependency on Vulnerable Third-Party Component vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_mass_storage: Fix potential integer overflow in check_command_size_in_blocks()
The `check_command_size_in_blocks()` function calculates the data size
in bytes by left shifting `common->data_size_from_cmnd` by the block
size (`common->curlun->blkbits`). However, it does not validate whether
this shift operation will cause an integer overflow.
Initially, the block size is set up in `fsg_lun_open()` , and the
`common->data_size_from_cmnd` is set up in `do_scsi_command()`. During
initialization, there is no integer overflow check for the interaction
between two variables.
So if a malicious USB host sends a SCSI READ or WRITE command
requesting a large amount of data (`common->data_size_from_cmnd`), the
left shift operation can wrap around. This results in a truncated data
size, which can bypass boundary checks and potentially lead to memory
corruption or out-of-bounds accesses.
Fix this by using the check_shl_overflow() macro to safely perform the
shift and catch any overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the
source operand is a constant. When dst has signed range [-1, 0], it
forks the verifier state: the pushed path gets dst = 0, the current
path gets dst = -1.
For BPF_AND this is correct: 0 & K == 0.
For BPF_OR this is wrong: 0 | K == K, not 0.
The pushed path therefore tracks dst as 0 when the runtime value is K,
producing an exploitable verifier/runtime divergence that allows
out-of-bounds map access.
Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to
push_stack(), so the pushed path re-executes the ALU instruction with
dst = 0 and naturally computes the correct result for any opcode. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: avoid overflows in ip6_datagram_send_ctl()
Yiming Qian reported :
<quote>
I believe I found a locally triggerable kernel bug in the IPv6 sendmsg
ancillary-data path that can panic the kernel via `skb_under_panic()`
(local DoS).
The core issue is a mismatch between:
- a 16-bit length accumulator (`struct ipv6_txoptions::opt_flen`, type
`__u16`) and
- a pointer to the *last* provided destination-options header (`opt->dst1opt`)
when multiple `IPV6_DSTOPTS` control messages (cmsgs) are provided.
- `include/net/ipv6.h`:
- `struct ipv6_txoptions::opt_flen` is `__u16` (wrap possible).
(lines 291-307, especially 298)
- `net/ipv6/datagram.c:ip6_datagram_send_ctl()`:
- Accepts repeated `IPV6_DSTOPTS` and accumulates into `opt_flen`
without rejecting duplicates. (lines 909-933)
- `net/ipv6/ip6_output.c:__ip6_append_data()`:
- Uses `opt->opt_flen + opt->opt_nflen` to compute header
sizes/headroom decisions. (lines 1448-1466, especially 1463-1465)
- `net/ipv6/ip6_output.c:__ip6_make_skb()`:
- Calls `ipv6_push_frag_opts()` if `opt->opt_flen` is non-zero.
(lines 1930-1934)
- `net/ipv6/exthdrs.c:ipv6_push_frag_opts()` / `ipv6_push_exthdr()`:
- Push size comes from `ipv6_optlen(opt->dst1opt)` (based on the
pointed-to header). (lines 1179-1185 and 1206-1211)
1. `opt_flen` is a 16-bit accumulator:
- `include/net/ipv6.h:298` defines `__u16 opt_flen; /* after fragment hdr */`.
2. `ip6_datagram_send_ctl()` accepts *repeated* `IPV6_DSTOPTS` cmsgs
and increments `opt_flen` each time:
- In `net/ipv6/datagram.c:909-933`, for `IPV6_DSTOPTS`:
- It computes `len = ((hdr->hdrlen + 1) << 3);`
- It checks `CAP_NET_RAW` using `ns_capable(net->user_ns,
CAP_NET_RAW)`. (line 922)
- Then it does:
- `opt->opt_flen += len;` (line 927)
- `opt->dst1opt = hdr;` (line 928)
There is no duplicate rejection here (unlike the legacy
`IPV6_2292DSTOPTS` path which rejects duplicates at
`net/ipv6/datagram.c:901-904`).
If enough large `IPV6_DSTOPTS` cmsgs are provided, `opt_flen` wraps
while `dst1opt` still points to a large (2048-byte)
destination-options header.
In the attached PoC (`poc.c`):
- 32 cmsgs with `hdrlen=255` => `len = (255+1)*8 = 2048`
- 1 cmsg with `hdrlen=0` => `len = 8`
- Total increment: `32*2048 + 8 = 65544`, so `(__u16)opt_flen == 8`
- The last cmsg is 2048 bytes, so `dst1opt` points to a 2048-byte header.
3. The transmit path sizes headers using the wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1463-1465`:
- `headersize = sizeof(struct ipv6hdr) + (opt ? opt->opt_flen +
opt->opt_nflen : 0) + ...;`
With wrapped `opt_flen`, `headersize`/headroom decisions underestimate
what will be pushed later.
4. When building the final skb, the actual push length comes from
`dst1opt` and is not limited by wrapped `opt_flen`:
- In `net/ipv6/ip6_output.c:1930-1934`:
- `if (opt->opt_flen) proto = ipv6_push_frag_opts(skb, opt, proto);`
- In `net/ipv6/exthdrs.c:1206-1211`, `ipv6_push_frag_opts()` pushes
`dst1opt` via `ipv6_push_exthdr()`.
- In `net/ipv6/exthdrs.c:1179-1184`, `ipv6_push_exthdr()` does:
- `skb_push(skb, ipv6_optlen(opt));`
- `memcpy(h, opt, ipv6_optlen(opt));`
With insufficient headroom, `skb_push()` underflows and triggers
`skb_under_panic()` -> `BUG()`:
- `net/core/skbuff.c:2669-2675` (`skb_push()` calls `skb_under_panic()`)
- `net/core/skbuff.c:207-214` (`skb_panic()` ends in `BUG()`)
- The `IPV6_DSTOPTS` cmsg path requires `CAP_NET_RAW` in the target
netns user namespace (`ns_capable(net->user_ns, CAP_NET_RAW)`).
- Root (or any task with `CAP_NET_RAW`) can trigger this without user
namespaces.
- An unprivileged `uid=1000` user can trigger this if unprivileged
user namespaces are enabled and it can create a userns+netns to obtain
namespaced `CAP_NET_RAW` (the attached PoC does this).
- Local denial of service: kernel BUG/panic (system crash).
-
---truncated--- |
| A flaw was found in nano. A local user could exploit a format string vulnerability in the `statusline()` function. By creating a directory with a name containing `printf` specifiers, the application attempts to display this name, leading to a segmentation fault (SEGV). This results in a Denial of Service (DoS) for the `nano` application. |
| In the Linux kernel, the following vulnerability has been resolved:
media: dvb-net: fix OOB access in ULE extension header tables
The ule_mandatory_ext_handlers[] and ule_optional_ext_handlers[] tables
in handle_one_ule_extension() are declared with 255 elements (valid
indices 0-254), but the index htype is derived from network-controlled
data as (ule_sndu_type & 0x00FF), giving a range of 0-255. When
htype equals 255, an out-of-bounds read occurs on the function pointer
table, and the OOB value may be called as a function pointer.
Add a bounds check on htype against the array size before either table
is accessed. Out-of-range values now cause the SNDU to be discarded. |
| seroval facilitates JS value stringification, including complex structures beyond JSON.stringify capabilities. In versions 0.2.0 through 1.4.0, overriding RegExp serialization with extremely large patterns can exhaust JavaScript runtime memory during deserialization. Additionally, overriding RegExp serialization with patterns that trigger catastrophic backtracking can lead to ReDoS (Regular Expression Denial of Service). This issue has been fixed in version 1.4.1. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: validate MTU against usable frame size on bind
AF_XDP bind currently accepts zero-copy pool configurations without
verifying that the device MTU fits into the usable frame space provided
by the UMEM chunk.
This becomes a problem since we started to respect tailroom which is
subtracted from chunk_size (among with headroom). 2k chunk size might
not provide enough space for standard 1500 MTU, so let us catch such
settings at bind time. Furthermore, validate whether underlying HW will
be able to satisfy configured MTU wrt XSK's frame size multiplied by
supported Rx buffer chain length (that is exposed via
net_device::xdp_zc_max_segs). |
