| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/MSI: Unmap MSI-X region on error"
This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202.
Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an
iounmap(dev->msix_base) on the error path of msix_capability_init() to
release the MSI-X region when msix_setup_interrupts() fails.
When msix_setup_interrupts() fails, the call chain is:
msix_setup_interrupts()
-> __msix_setup_interrupts()
struct pci_dev *dev __free(free_msi_irqs) = __dev;
...
return ret; // __free cleanup fires on error
The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which
already handles the unmap:
void pci_free_msi_irqs(struct pci_dev *dev)
{
pci_msi_teardown_msi_irqs(dev);
if (dev->msix_base) {
iounmap(dev->msix_base); // already unmapped here
dev->msix_base = NULL; // and set to NULL
}
}
So dev->msix_base is unmapped and set to NULL before
msix_setup_interrupts() returns to msix_capability_init(). The
"goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap
MSI-X region on error") then calls iounmap() a second time on a NULL
pointer.
This was reproduced on Intel Emerald Rapids (192 CPUs) while
running tools/testing/selftests/kexec/test_kexec_jump.sh:
WARNING: CPU#44 at iounmap+0x2a/0xe0
RIP: 0010:iounmap+0x2a/0xe0
RDI: 0000000000000000
Call Trace:
msix_capability_init+0x317/0x3f0
__pci_enable_msix_range+0x21d/0x2c0
pci_alloc_irq_vectors_affinity+0xa9/0x130
nvme_setup_io_queues+0x2a8/0x420 [nvme]
nvme_reset_work+0x151/0x340 [nvme]
...
RDI=0 confirms iounmap() is called with NULL.
Restore the original "goto out_disable" and leave the unmap to the
existing __free(free_msi_irqs) cleanup. |
| A flaw has been found in houtini-ai houtini-lm up to 2.13.2. The impacted element is an unknown function of the file src/index.ts of the component code_task_files. Executing a manipulation can lead to path traversal. The attack can be launched remotely. This patch is called 35d97bca0531894da36a85aedb95312da1bd5b7a. It is best practice to apply a patch to resolve this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Avoid double-unpin of DOORBELL/MMIO BOs on free
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO
remap BOs (which are pinned at allocation time) before checking whether
the BO is still mapped to the GPU. When the BO is still mapped, the
function returns -EBUSY and leaves the BO alive, but it has already
been unpinned. The BO is then unpinned again when it is finally freed
during process teardown, triggering a ttm_bo_unpin() underflow warning:
WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm]
Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu]
RIP: 0010:amdttm_bo_unpin+0x6d/0x80 [amdttm]
Call Trace:
amdgpu_bo_unpin+0x1a/0x90 [amdgpu]
amdgpu_amdkfd_gpuvm_unpin_bo+0x31/0xb0 [amdgpu]
amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x3bf/0x460 [amdgpu]
kfd_process_free_outstanding_kfd_bos+0xd4/0x170 [amdgpu]
kfd_process_wq_release+0x109/0x1b0 [amdgpu]
process_one_work+0x1e2/0x3b0
worker_thread+0x50/0x3a0
kthread+0xdd/0x100
ret_from_fork+0x29/0x50
Move the unpin after the mapped_to_gpu_memory check so it only happens
once we are committed to freeing the BO.
(cherry picked from commit 927c5b2defb9b09856444d94bebfd056a002bd75) |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/mm: use physical alignment for vmemmap_start_pfn
RISC-V computes vmemmap_start_pfn by rounding phys_ram_base down to
VMEMMAP_ADDR_ALIGN. That alignment must therefore be expressed in the
physical-address domain.
Commit 476849b0fba4 ("riscv/mm: align vmemmap to maximal folio size")
attempted to account for the maximal folio alignment by feeding
MAX_FOLIO_VMEMMAP_ALIGN directly into VMEMMAP_ADDR_ALIGN. However,
MAX_FOLIO_VMEMMAP_ALIGN is measured in bytes of struct page storage,
whereas VMEMMAP_ADDR_ALIGN is used to align a physical address.
The mask-based compound_info encoding requires pfn_to_page(0) to be
naturally aligned to MAX_FOLIO_VMEMMAP_ALIGN. Commit 9f94db4c7eaa
("mm/sparse: check memmap alignment for compound_info_has_mask()") added a
check for that requirement and exposed the unit mismatch on systems such
as QEMU virt, where the DRAM base is not aligned to MAX_FOLIO_NR_PAGES *
PAGE_SIZE.
Here is the log:
[ 0.000000][ C0] ------------[ cut here ]------------
[ 0.000000][ C0] WARNING: mm/sparse.c:365 at sparse_init+0x58a/0x6fe, CPU#0: swapper/0
[ 0.000000][ C0] Modules linked in:
[ 0.000000][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.2.0-rc3-g1d8304bdd65f #2 PREEMPT
[ 0.000000][ C0] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000][ C0] epc : sparse_init+0x58a/0x6fe
[ 0.000000][ C0] ra : sparse_init+0x58a/0x6fe
[ 0.000000][ C0] epc : ffffffff86851c88 ra : ffffffff86851c88 sp : ffffffff88807a30
[ 0.000000][ C0] gp : ffffffff8a3bf240 tp : ffffffff88842080 t0 : ff600000ffab6000
[ 0.000000][ C0] t1 : 000000017fab6000 t2 : 65203a6573726363 s0 : ffffffff88807bc0
[ 0.000000][ C0] s1 : 000000000e000000 a0 : 0000000000000007 a1 : 0000000000000000
[ 0.000000][ C0] a2 : 0000000000000002 a3 : ffffffff86851c88 a4 : 0000000000000000
[ 0.000000][ C0] a5 : ffffffff88843080 a6 : 0000000000000003 a7 : 0000000000000000
[ 0.000000][ C0] s2 : ff60000000000000 s3 : 0040000000000000 s4 : 0004000000000000
[ 0.000000][ C0] s5 : ffffffff8a4d92e0 s6 : ff600000ffab55e0 s7 : ffffffff88384d00
[ 0.000000][ C0] s8 : 0000000000000003 s9 : ffffffff88384cc1 s10: ffffffff88384cc0
[ 0.000000][ C0] s11: ffffffff8a4daae0 t3 : ffffffff915e8b20 t4 : ffffffff915e8b20
[ 0.000000][ C0] t5 : ffffffff915e8b20 t6 : ffffffff915e8bc8 ssp : 0000000000000000
[ 0.000000][ C0] status: 0000000200000100 badaddr: ffffffff86851c88 cause: 0000000000000003
[ 0.000000][ C0] [<ffffffff86851c88>] sparse_init+0x58a/0x6fe
[ 0.000000][ C0] [<ffffffff8683d396>] mm_core_init_early+0x116/0x1e30
[ 0.000000][ C0] [<ffffffff86801edc>] start_kernel+0xd2/0x848
Convert MAX_FOLIO_VMEMMAP_ALIGN to the equivalent physical alignment
before using it in VMEMMAP_ADDR_ALIGN. This keeps the existing
round_down() logic while making the resulting vmemmap base satisfy the
mask-alignment requirement. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: drop __init from vec_check_unaligned_access_speed_all_cpus
This function runs within a kthread and need not necessarily finish
before system finishes boot and free_initmem() unmaps the .init.text
section. This function makes calls to SBI for probing unaligned access
speed, and if this is slow for some reason (say some debug prints were
added to SBI), the kthread can still be running at this point and result
in an instruction page fault when trying to fetch from the freed region.
[ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8
[ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000
[ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3
[ 25.661244] Oops [#1]
[ 25.662997] Modules linked in:
[ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY
[ 25.674669] Hardware name: Tenstorrent Blackhole (DT)
[ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20
[ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000
[ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30
[ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002
[ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000
[ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30
[ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0
[ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000
[ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000
[ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402
[ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000
[ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c
[ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c
[ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc
[ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4
[ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18
[ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc
Drop __init from its signature so that this doesn't happen. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions
mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into
tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map().
If these functions are invoked while mmio_trace_array is NULL (e.g. before
initialization or after disabled), accessing tr->array_buffer.buffer will
result in a NULL pointer dereference crash.
Fix this by adding an explicit NULL check for tr at the beginning of
__trace_mmiotrace_rw() and __trace_mmiotrace_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: bound interrupt-vector register fill to the allocated array
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller
mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq
cookie), but mtk_poll_controller incorrectly passed the net_device *.
Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled
would then crash. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (ltc4282) Fix reading the minimum alarm voltage
Coverity reports an out-of-bounds access when reading the minimum alarm
voltage for the VGPIO channel. Add the missing return statement to fix
the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context
In the nested state, the physical interrupt has already been
deactivated through the HW bit in the LR. The extra deactivation
would be harmless but can hit an errata case on AmpereOne, so
avoid it here.
On AmpereOne, deactivating a physical interrupt through
ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not
active, but is the highest priority pending interrupt causes the
cpu to lose the interrupt pending state and also prevents the
delivery of future interrupts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix missing authorization check in KFD_IOC_DBG_TRAP_DISABLE
Prevent unauthorized termination of active GPU debug sessions.
Previously, users with /dev/kfd access could terminate another process's
debug session without proper ownership or ptrace authorization.
(cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5) |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: do not propagate one-packet flag to synced conns
Synced connections can be created before their destination exists. When
the destination is later added, ip_vs_bind_dest() copies connection flags
from the destination into cp->flags.
IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced
connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed,
expiry can treat it as a one-packet connection and skip unlinking the
existing conn_tab node, leaving stale hash nodes pointing at a freed
struct ip_vs_conn.
Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced
connections. |
| In the Linux kernel, the following vulnerability has been resolved:
of: reserved_mem: prevent OOB when too many dynamic regions are defined
On boot, fdt_scan_reserved_mem() saves each dynamically-placed
/reserved-memory subnode into a local array of size
MAX_RESERVED_REGIONS.
If the device tree defines more than MAX_RESERVED_REGIONS
dynamically-placed regions, fdt_scan_reserved_mem() writes past the
end of the local array.
Add a bounds check that logs an error and skips the excess regions,
restoring the original behavior. |
| The Customer Reviews for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the aggregated review form submission in versions up to and including 5.106.0. This is due to insufficient input sanitization and output escaping on user-supplied review comment text. The plugin accepts review submissions from unauthenticated users through the 'cr_local_forms_submit' AJAX action without sanitizing HTML content before storing it via wp_insert_comment(), and later renders this stored content on product pages through comment_text() without proper escaping. This makes it possible for unauthenticated attackers with a valid review form URL (obtainable through review reminder emails sent to customers who placed orders) to inject arbitrary web scripts in pages that will execute whenever a user accesses the affected product page. |
| The Everest Forms plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 3.4.4. This is due to the `load_previous_field_value()` method in `class-evf-form-task.php` accepting arbitrary URL values from `$_POST` data for upload fields without domain restriction, which are then passed to `wp_remote_head()` in the `get_local_file_size()` method of `class-evf-form-fields-upload.php`. This makes it possible for unauthenticated attackers to force the WordPress server to make outbound HTTP HEAD requests to arbitrary URLs by submitting a form with an upload field containing a malicious URL while leaving a required field empty to trigger form re-rendering. |
| The WP Rocket plugin for WordPress is vulnerable to Stored Cross-Site Scripting in versions up to, and including, 3.21.0.1. This is due to insufficient input sanitization and output escaping of user-supplied data via the rocket_beacon AJAX endpoint. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Envira Gallery plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the gallery 'description' configuration field in all versions up to, and including, 1.12.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses a page displaying the gallery with a description enabled. |
| Uncontrolled Recursion vulnerability in the Elixir standard library allows an attacker who controls a list passed to inspect/1, List.to_string/1, or List.to_charlist/1 to exhaust a BEAM node's memory.
Inspect.List's charlist branch in lib/elixir/lib/inspect.ex classifies a list as a charlist using List.ascii_printable?/2, which examines only the first :printable_limit (4096 by default) elements, and then calls IO.chardata_to_string/1 on the whole term. A list whose printable prefix exceeds that limit but which contains a later element that is not a code point (an atom, an out-of-range integer, or an improper tail) is therefore mis-classified, and the conversion raises ArgumentError. That conversion runs inside List.to_string/1, whose rescue clause builds its message by interpolating inspect(list), which re-enters the same branch and raises again. The nested inspection is an argument to raise, so the recursion is not in tail position and every level is retained: the process stack grows monotonically while each cycle re-walks the list, until the process is killed by max_heap_size or, by default, the node runs out of memory. List.to_charlist/1 has the same rescue shape.
Below the printable limit the inner inspect/1 sees the invalid element within its counter and renders the list in ordinary bracket form, so a single ArgumentError is raised and no recursion occurs.
This issue affects elixir: from 1.15.0-rc.0 before 1.18.5, from 1.19.0-rc.0 before 1.19.6, and from 1.20.0-rc.0 before 1.20.4. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at
the 'out:' label, but only calls the matching get_cpu_var() after the
'i < 0' early-return check. When event->hw.idx is negative the
function jumps to 'out:' without having taken get_cpu_var(), and the
trailing put_cpu_var() then issues an unmatched preempt_enable(),
underflowing preempt_count.
On a CONFIG_PREEMPT=y kernel preempt_count would underflow and
eventually present as a 'scheduling while atomic' BUG.
Move put_cpu_var() to pair with get_cpu_var() so the percpu access is
correctly bracketed and the 'out:' label only handles perf_pmu_enable. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Serialize readq reset state with q->lock
snd_seq_oss_readq_clear() resets qlen, head, and tail without
q->lock even though the normal reader and producer paths serialize the
same ring state under that spinlock. A reset can therefore race
snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave
stale records in the queue, drop freshly queued ones, or report the
wrong readiness after wakeup. KCSAN reports a data race between
snd_seq_oss_readq_clear() and snd_seq_oss_readq_free().
Take q->lock while clearing the ring and resetting input_time. Factor
the enqueue logic into a caller-locked helper so
snd_seq_oss_readq_put_timestamp() updates its suppression state under
the same lock instead of racing the reset path.
The buggy scenario involves two paths, with each column showing the
order within that path:
reset path: locked readq updater:
1. snd_seq_oss_reset() or 1. A reader or callback producer
release reaches takes q->lock on the same queue.
snd_seq_oss_readq_clear().
2. snd_seq_oss_readq_clear() 2. The updater tests or modifies
resets qlen, head, tail, qlen, head, and tail.
and input_time.
3. snd_seq_oss_readq_clear() 3. The updater completes its
wakes sleepers on read-modify-write sequence.
q->midi_sleep.
4. Without q->lock, the reset 4. The resulting ring state drives
can overlap the locked later reads and readiness.
update.
KCSAN reports:
BUG: KCSAN: data-race in snd_seq_oss_readq_clear /
snd_seq_oss_readq_free
write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0:
snd_seq_oss_readq_free+0x6c/0x80
snd_seq_oss_read+0xcb/0x250
odev_read+0x38/0x60
vfs_read+0xff/0x600
ksys_read+0xb4/0x140
__x64_sys_read+0x46/0x60
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1:
snd_seq_oss_readq_clear+0x1f/0x90
snd_seq_oss_reset+0xa7/0xf0
snd_seq_oss_ioctl+0x6f6/0x7e0
odev_ioctl+0x56/0xc0
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x00000001 -> 0x00000000 |
