Search

Search Results (424672 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-87042 1 Zephyrproject 1 Zephyr 2026-11-14 6.5 Medium
The IEEE 1588 (PTP) port implementation in subsys/net/lib/ptp/port.c adopted the logMessageInterval field of a received Delay_Resp message without any validation. port_delay_resp_msg_process() stored the raw wire value (a full-range int8_t) into port_ds.log_min_delay_req_interval, and that value is later used as a shift count by port_timer_set_timeout() when the Delay_Req timer is armed. Values below about -30 truncate the computed timeout to zero, and values with a magnitude of 64 or more perform an undefined shift of a uint64_t; the standards-defined "not applicable" encoding 0x7F fell into the latter case as well. PTP messages are received over unauthenticated link-local traffic (UDP multicast on 224.0.1.129, IPv6 multicast, or raw IEEE 802.3), and the handler accepts a Delay_Resp from any sender as long as the port is a time receiver using the end-to-end delay mechanism and the message echoes the port identity and a pending sequence id — both of which the victim itself broadcasts in its Delay_Req. Any node on the same link can therefore inject a single crafted Delay_Resp, or simply become the time transmitter and advertise the bogus interval. Once the delay timer is armed with a zero timeout, the cooperative PTP thread re-arms and retransmits a Delay_Req on every tick. Each transmission takes a buffer from the fixed CONFIG_PTP_MSG_POLL_SIZE message slab (default 10) and holds it on port->delay_req_list for three seconds, so the slab is emptied within milliseconds and ptp_msg_alloc() then blocks with K_FOREVER inside the only thread that frees those buffers — permanently stalling time synchronization until reboot. Where a transmit-timestamp callback on another thread keeps recycling buffers, the result is instead a sustained multicast Delay_Req flood and continuous CPU consumption. There is no memory corruption and no disclosure of data; the impact is availability of the PTP subsystem and of the local network segment. The fix rejects intervals outside a representable range and treats 0x7F as "not applicable" as required by IEEE 1588-2019 Table 42. The equivalent unchecked adoption of logMessageInterval from Sync messages in port_sync_msg_process(), a weaker variant of the same issue, is fixed by the companion change 334bf57f416f (#118150), which applies the same range check, ignores the field for unicast Sync messages and treats 0x7F as not applicable.
CVE-2026-82978 1 Revive 1 Adserver 2026-11-14 N/A
An authorization bypass in channel-edit.php in Revive Adserver 6.0.8 and earlier allows an authenticated manager to create a delivery rule set belonging to another agency by changing the submitted agencyid parameter. The server trusts the submitted agency identifier when inserting the new rule set, allowing unauthorized creation of objects in another agency's account. The issue is fixed in Revive Adserver 6.0.9 by obtaining the agency identifier from the authenticated account rather than submitted form data and removing the agency identifier from the form's hidden fields.
CVE-2026-86322 1 Redhat 4 Satellite, Satellite Capsule, Satellite Maintenance and 1 more 2026-11-14 8.8 High
A flaw was found in Foreman’s Api::V2::PersonalAccessTokensController, where Foreman::Controller::UserAware#find_user resolves the target account using User.find(params[:user_id]) without applying the required parent-user authorization check. An attacker with the create_personal_access_tokens permission can therefore invoke POST /api/v2/users/:user_id/personal_access_tokens with another user’s ID and create a Personal Access Token on their behalf. The resulting plaintext token is returned in the API response, while PersonalAccessToken#check_permissions_after_save only validates create_personal_access_tokens on the token and does not enforce edit_users authorization on the target user. The attacker can then use the forged token to authenticate as the victim, potentially resulting in complete account takeover, including administrator accounts.
CVE-2026-82391 1 Zephyrproject 1 Zephyr 2026-11-14 9.1 Critical
The HTTP/2 front-end of the Zephyr HTTP server aliased connection receive state as a scratch output. In subsys/net/lib/http/http_server_http2.c, handle_http2_static_fs_resource() passed &client->data_len as the file_size out-parameter of http_server_find_file(). client->data_len is the count of unprocessed bytes remaining in the fixed-size per-connection receive buffer client->buffer[CONFIG_HTTP_SERVER_CLIENT_BUFFER_SIZE] (256 bytes by default), an invariant every frame handler and the socket receive path rely on. Serving any static file therefore replaced that bounded value with the file's on-disk size, and nothing resets it afterwards. The defect is reached by an unauthenticated HTTP/2 GET for any file under the web root, in applications that register a static-filesystem resource (HTTP_RESOURCE_TYPE_STATIC_FS) with CONFIG_FILE_SYSTEM=y; CONFIG_HTTP_SERVER_VERSION_2 is enabled by default and no TLS or credentials are required on this path. Once client->data_len exceeds the buffer size, the frame dispatch loop in subsys/net/lib/http/http_server_core.c keeps parsing past the end of the received data, and the peer controls the bytes at client->cursor, so it can choose which fabricated frame the state machine consumes next by appending bytes after its request. The inflated length defeats the only guards on the buffer. parse_http_frame_header() and the per-frame handlers read and skip up to a 24-bit frame length beyond the buffer (out-of-bounds read); the compaction memmove(client->buffer, client->cursor, client->data_len) at the end of request handling copies the file-size number of bytes into the 256-byte buffer, overflowing the rest of struct http_client_ctx — including the current_detail/current_stream pointers, the parser_settings function-pointer table and the inactivity_timer work handler — and the adjacent client contexts in static memory; and the subsequent zsock_recv(client->fd, client->buffer + client->data_len, sizeof(client->buffer) - client->data_len, 0) underflows its size argument, writing attacker-supplied data of attacker-chosen length out of bounds. The impact is remote memory corruption in the server's single address space: at minimum a crash or hang of the device, and plausibly control-data overwrite leading to code execution. The HTTP/1 and HTTP/3 static-filesystem handlers already used a local variable and are unaffected; the fix makes the HTTP/2 handler use a local size_t file_size as well.
CVE-2026-77168 1 Revive 1 Adserver 2026-11-14 N/A
A cross-site request forgery vulnerability in tracker-invocation.php in Revive Adserver 6.0.8 and earlier allows an attacker to modify a tracker's name, description or advertiser assignment using an authenticated victim's permissions. A leftover state-changing handler accepts request parameters without verifying a CSRF token, although it is not used by the normal invocation-tag interface. Exploitation requires victim interaction and a request path that carries the victim's session credentials. The issue is fixed in Revive Adserver 6.0.9 by removing the unused tracker-modification handler.
CVE-2026-126936 1 Diced 1 Zipline 2026-11-14 5.9 Medium
Zipline before 4.7.0 contains a race condition vulnerability that allows users to bypass invitation usage limits, upload storage quotas, and shortened-URL quotas through concurrent requests. Attackers can send overlapping registration, upload, or URL creation requests that pass checks against stale state, creating extra accounts and exceeding administrator-configured resource quotas.
CVE-2026-126494 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-14 7.1 High
OpenEMR before 8.4.0 contains an improper authorization vulnerability in ScopeRepository::finalizeScopes() that allows read-only SMART/OAuth clients to obtain write scopes because ScopeEntity::containsScope() ignores registered permissions. Attackers with a client registered for user/<resource>.read can request user/<resource>.write to create, update, and delete appointments or patient data.
CVE-2026-126491 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-14 7.6 High
OpenEMR before 8.5.0 contains a stored SQL injection vulnerability in getByPatientDemographics() where layout_options field_id values are concatenated into the patient search WHERE clause. Attackers with Layout Editor access can plant a malicious field_id, allowing any authenticated low-privilege user to exfiltrate data from patient_data and users_secure tables.
CVE-2026-126483 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-14 6.5 Medium
OpenEMR before 8.5.0 contains an SQL injection vulnerability that allows authenticated report users to manipulate queries by supplying a crafted form_facility value to interface/reports/ippf_statistics.php. Attackers can close the string literal in the facility_id WHERE clause and use boolean or time-based payloads to read sensitive database contents.
CVE-2026-126479 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-14 7.6 High
OpenEMR before 8.5.0 contains a missing authorization vulnerability in five Module Manager InstallerController actions that lack the admin/manage_modules ACL check and CSRF validation. Low-privilege users such as Front Office accounts can POST to saveConfig or SaveHooks to overwrite any module's configuration, retarget CCDA and HIE settings, and delete module hooks.
CVE-2026-126474 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-14 6.1 Medium
OpenEMR before 8.5.0 contains a reflected cross-site scripting vulnerability in the ACL module that allows attackers to execute JavaScript in authenticated sessions via the module_id parameter. Attackers can deliver crafted acl/index or acl/acl links that inject unencoded input into inline script blocks, stealing non-HttpOnly session cookies and modifying ACL configuration.
CVE-2026-126470 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-14 8.8 High
OpenEMR before 8.5.0 contains an insecure direct object reference vulnerability in the Carecoordination module that allows authenticated users with send_to_hie permission to access any patient's CCDA/CCR/QRDA documents. Attackers can supply arbitrary document or patient IDs to download, transmit, or export patient health records, inject falsified clinical data, and delete audit records.
CVE-2026-126467 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-14 6.5 Medium
OpenEMR before 8.5.0 contains a mass assignment vulnerability in ObservationController::processEnhancedFormSave() that allows authenticated low-privilege users to forge authorization flags through an incomplete field blacklist. Attackers can submit authorized=1 or override the id field alongside observation_id to mark observations as Provider-signed and overwrite clinical fields of other observations within the same patient encounter.
CVE-2026-126463 2 Open-emr, Openemr 2 Openemr, Openemr 2026-11-14 7.1 High
OpenEMR before 8.5.0 contains multiple sql injection vulnerabilities that allow authenticated users to inject payloads through ERA CLP01, form_facility, form_icd_codes, and POST key names. Attackers can perform UNION, blind, and error-based injection to read users_secure password hashes and patient PHI, and overwrite patient_data fields.
CVE-2026-77685 1 Zephyrproject 1 Zephyr 2026-11-14 8.3 High
The RFCOMM multiplexer control-channel handler in subsys/bluetooth/host/classic/rfcomm.c computed the echo length for a BT_RFCOMM_TEST command as buf->len - 1 and passed it to rfcomm_send_test(), whose length parameter is a uint8_t. A malformed but FCS-valid UIH frame on DLCI 0 can leave buf->len == 0 after rfcomm_handle_msg() pulls the two-byte MCC header, so buf->len - 1 underflows and narrows to 255. rfcomm_send_test() then copies 255 bytes out of a receive buffer that holds no remaining valid data, and appends them to an outgoing L2CAP PDU allocated with only CONFIG_BT_L2CAP_TX_MTU (253 by default for CONFIG_BT_CLASSIC) bytes of tailroom. The source read runs past the end of the ACL receive buffer into adjacent buffers of the same net_buf pool, and the destination copy overruns the transmit buffer by about eight bytes; net_buf_add_mem() performs no runtime bounds check in ordinary builds, where the underlying __ASSERT_NO_MSG() is compiled out. The trigger is a single five-byte RFCOMM frame on the multiplexer control channel, which is processed as soon as the L2CAP channel for PSM 3 is established — before any DLC exists and independent of RFCOMM session state. bt_rfcomm_init() registers that L2CAP server with .sec_level = BT_SECURITY_L1, which l2cap_br_conn_security() accepts without any link key from a peer that does not claim host Secure Simple Pairing support, so an unpaired BR/EDR device in radio range of a connectable target with CONFIG_BT_RFCOMM enabled (SPP, HFP, HSP, GOEP and similar profiles all enable it) can reach the defect. The resulting 255-byte TEST response is transmitted back to the attacker, disclosing roughly 255 bytes of adjacent stack/pool memory — including the contents of neighbouring receive buffers, which an attacker can prime with earlier packets — and the accompanying out-of-bounds write corrupts memory following the transmit buffer, which can crash the Bluetooth host. The request is trivially repeatable, so both the disclosure and the corruption can be driven at will. Two fixes are needed, and the first on its own does not close the out-of-bounds write. Fix 1 (0040ef781e1d, #115768) strips the FCS byte in rfcomm_recv() and echoes buf->len, rejecting anything over UINT8_MAX, which removes the underflow and the over-read. But rfcomm_make_uih_msg() still allocates the response with bt_l2cap_create_pdu() and never compares the requested length with the buffer's tailroom, so a well-formed TEST command carrying a pattern of about 248 bytes or more still builds a response (3-byte frame header, 2-byte message header, pattern, FCS) larger than the 253 bytes available. A pattern that long can only be received when the RFCOMM L2CAP receive MTU (CONFIG_BT_RFCOMM_L2CAP_MTU, which defaults to CONFIG_BT_BUF_ACL_RX_SIZE) exceeds CONFIG_BT_L2CAP_TX_MTU. The plain BR/EDR defaults (200 against 253) cannot reach it, but from v4.3.0 enabling CONFIG_BT_GOEP raises CONFIG_BT_BUF_ACL_RX_SIZE to 264 (265 from v4.4.0), so GOEP builds with only fix 1 applied still overrun the transmit buffer by up to eight bytes. This includes v4.3.2, the last v4.3 release, which carries fix 1 but will not receive fix 2. Fix 2 (214530895dd3, #118293) checks the tailroom on every RFCOMM PDU allocation and closes this residual write.
CVE-2026-68862 2026-11-14 6.6 Medium
Dell Terraform Provider for Dell PowerFlex contain(s) an OS Command Injection Vulnerability in the SDC host provisioning component. A high privileged remote attacker with access to the PowerFlex management plane could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on provisioned SDC hosts. Exploitation may lead to full compromise of affected SDC hosts.
CVE-2026-76078 1 Getprobo 1 Probo 2026-11-14 3.1 Low
Probo is a self-hostable governance, risk, and compliance (GRC) platform built for engineering and security teams. Prior to version 0.224.0, the public Trust Center GraphQL API exposes acceptElectronicSignature and recordSigningEvent, both gated only by @authentication(required: PRESENT) @sessionOnly — any self-provisioned trust center identity can call them. The underlying esign.Service.AcceptSignature and esign.Service.recordEvent build the tenant scope from the client-supplied signatureId GID (coredata.NewScopeFromObjectID(req.SignatureID)) and load the signature by that GID. At no point do they verify that the signature belongs to the caller or that the caller's email matches the signature's SignerEmail. As a result, any authenticated trust-center visitor who possesses another visitor's signature GID can: (1) complete that visitor's NDA signature — overwriting signer name/IP/UA with attacker data and setting status to Accepted, which triggers the sealing worker to generate a completion certificate; (2) inject arbitrary audit-trail events into any signature's log. Both attacks defeat the non-repudiation and integrity guarantees of the e-signature system. This issue has been patched in version 0.224.0.
CVE-2026-82977 1 Webpros 1 Plesk 2026-11-14 N/A
The Plesk GoAccess statistics integration in Plesk Obsidian for Linux, versions 18.0.77 to 18.0.81.7, 18.0.82 to 18.0.82.2, allows cross-subscription information disclosure.
CVE-2026-122063 2 Contrid, Wordpress-extensions 2 Newsletters, Newsletters 2026-11-14 6.5 Medium
The Newsletters plugin for WordPress is vulnerable to blind SQL Injection via the 'user_email' parameter in all versions up to, and including, 4.18.2 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation requires the admin-controlled 'currentusersubscribed' option to be enabled and at least one page rendering the Newsletters subscribe shortcode or widget to exist; a Subscriber-level attacker can self-serve the attack by updating their own profile email to a crafted payload and loading such a page.
CVE-2026-76079 1 Getprobo 1 Probo 2026-11-14 7.2 High
Probo is a self-hostable governance, risk, and compliance (GRC) platform built for engineering and security teams. Prior to version 0.224.0, an organization ADMIN can mint an OWNER membership via createUser, bypassing the owner-only set-owner authorization gate. This issue has been patched in version 0.224.0.