| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
Number of MW LUTs depends on NTB configuration and can be set to zero,
in such scenario rounddown_pow_of_two will cause undefined behaviour and
should not be performed.
This patch ensures that rounddown_pow_of_two is called on valid value. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix freemap adjustments when adding xattrs to leaf blocks
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix null dereference in find_network
The variable pwlan has the possibility of being NULL when passed into
rtw_free_network_nolock() which would later dereference the variable. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tegra-video: Fix memory leak in __tegra_channel_try_format()
The state object allocated by __v4l2_subdev_state_alloc() must be freed
with __v4l2_subdev_state_free() when it is no longer needed.
In __tegra_channel_try_format(), two error paths return directly after
v4l2_subdev_call() fails, without freeing the allocated 'sd_state'
object. This violates the requirement and causes a memory leak.
Fix this by introducing a cleanup label and using goto statements in the
error paths to ensure that __v4l2_subdev_state_free() is always called
before the function returns. |
| In the Linux kernel, the following vulnerability has been resolved:
md/bitmap: fix GPF in write_page caused by resize race
A General Protection Fault occurs in write_page() during array resize:
RIP: 0010:write_page+0x22b/0x3c0 [md_mod]
This is a use-after-free race between bitmap_daemon_work() and
__bitmap_resize(). The daemon iterates over `bitmap->storage.filemap`
without locking, while the resize path frees that storage via
md_bitmap_file_unmap(). `quiesce()` does not stop the md thread,
allowing concurrent access to freed pages.
Fix by holding `mddev->bitmap_info.mutex` during the bitmap update. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: enable basic endpoint checking
pegasus_probe() fills URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_rcvbulkpipe(dev, 1) for RX data
- usb_sndbulkpipe(dev, 2) for TX data
- usb_rcvintpipe(dev, 3) for status interrupts
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a pegasus_usb_ep enum for endpoint numbers, replacing magic
constants throughout. Add usb_check_bulk_endpoints() and
usb_check_int_endpoints() calls before any resource allocation to
verify endpoint types before use, rejecting devices with mismatched
descriptors at probe time, and avoid triggering assertion.
Similar fix to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
- commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking") |
| In the Linux kernel, the following vulnerability has been resolved:
HID: magicmouse: Do not crash on missing msc->input
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, msc->input stays NULL,
leading to a crash at a later time.
Detect this condition in the input_configured() hook and reject the device.
This is not supposed to happen with actual magic mouse devices, but can be
provoked by imposing as a magic mouse USB device. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV"
This reverts commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wan/fsl_ucc_hdlc: Fix dma_free_coherent() in uhdlc_memclean()
The priv->rx_buffer and priv->tx_buffer are alloc'd together as
contiguous buffers in uhdlc_init() but freed as two buffers in
uhdlc_memclean().
Change the cleanup to only call dma_free_coherent() once on the whole
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-pl: handle probe errors
Errors in init must be reported back or we'll
follow a NULL pointer the first time FF is used. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leak on larb probe
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leaks on common probe
Make sure to drop the reference taken when looking up the SMI device
during common probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Avoid bitfield RMW for claim/retune flags
Move claimed and retune control flags out of the bitfield word to
avoid unrelated RMW side effects in asynchronous contexts.
The host->claimed bit shared a word with retune flags. Writes to claimed
in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite
other bits when concurrent updates happen in other contexts, triggering
spurious WARN_ON(!host->claimed). Convert claimed, can_retune,
retune_now and retune_paused to bool to remove shared-word coupling. |
| In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't dump the entire memory region
The current logic at cper_print_fw_err() doesn't check if the
error record length is big enough to handle offset. On a bad firmware,
if the ofset is above the actual record, length -= offset will
underflow, making it dump the entire memory.
The end result can be:
- the logic taking a lot of time dumping large regions of memory;
- data disclosure due to the memory dumps;
- an OOPS, if it tries to dump an unmapped memory region.
Fix it by checking if the section length is too small before doing
a hex dump.
[ rjw: Subject tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Move vbus draw to workqueue context
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix reflink preserve cleanup issue
commit c06c303832ec ("ocfs2: fix xattr array entry __counted_by error")
doesn't handle all cases and the cleanup job for preserved xattr entries
still has bug:
- the 'last' pointer should be shifted by one unit after cleanup
an array entry.
- current code logic doesn't cleanup the first entry when xh_count is 1.
Note, commit c06c303832ec is also a bug fix for 0fe9b66c65f3. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: always flush state and policy upon NETDEV_UNREGISTER event
syzbot is reporting that "struct xfrm_state" refcount is leaking.
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2
ref_tracker: netdev@ffff888052f24618 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_tracker_alloc include/linux/netdevice.h:4412 [inline]
xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316
xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline]
xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022
xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550
xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592
___sys_sendmsg+0x134/0x1d0 net/socket.c:2646
__sys_sendmsg+0x16d/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This is because commit d77e38e612a0 ("xfrm: Add an IPsec hardware
offloading API") implemented xfrm_dev_unregister() as no-op despite
xfrm_dev_state_add() from xfrm_state_construct() acquires a reference
to "struct net_device".
I guess that that commit expected that NETDEV_DOWN event is fired before
NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add()
is called only if (dev->features & NETIF_F_HW_ESP) != 0.
Sabrina Dubroca identified steps to reproduce the same symptoms as below.
echo 0 > /sys/bus/netdevsim/new_device
dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/)
ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \
spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \
offload crypto dev $dev dir out
ethtool -K $dev esp-hw-offload off
echo 0 > /sys/bus/netdevsim/del_device
Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after
xfrm_dev_state_add() acquired a reference to "struct net_device".
Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit
when acquiring a reference to "struct net_device".
Commit 03891f820c21 ("xfrm: handle NETDEV_UNREGISTER for xfrm device")
re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that
commit for unknown reason chose to share xfrm_dev_down() between the
NETDEV_DOWN event and the NETDEV_UNREGISTER event.
I guess that that commit missed the behavior in the previous paragraph.
Therefore, we need to re-introduce xfrm_dev_unregister() in order to
release the reference to "struct net_device" by unconditionally flushing
state and policy. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
Do not crash when a report has no fields.
Fake USB gadgets can send their own HID report descriptors and can define report
structures without valid fields. This can be used to crash the kernel over USB. |
