| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: clear new_transport when removing a peer
sctp_process_asconf_param() stores a newly added peer transport in
asoc->new_transport. After all parameters in the ASCONF chunk have been
processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the
new transport.
An authenticated ASCONF from a remote SCTP peer can add a transport and
remove it again with a wildcard DEL-IP parameter in the same chunk. The
wildcard deletion preserves the transport on which the ASCONF arrived, but
removes the newly added transport through
sctp_assoc_del_nonprimary_peers(). The removal does not clear
asoc->new_transport, leaving it pointing to the removed transport.
sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points
to the removed transport without holding a transport reference. During
local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on
control_chunk_list. After the transport is freed by RCU, a successful
ASCONF_ACK for the replacement address releases the queued HEARTBEAT and
sctp_outq_select_transport() reads the freed transport's state.
The issue was found during a static audit of SCTP objects. With an
authenticated peer, the reproducer triggered the same KASAN report in 2
of 2 unpatched runs on a KASAN-enabled netdev/main kernel:
BUG: KASAN: slab-use-after-free in sctp_outq_select_transport
Read of size 4 at addr ffff88800b9bd95c by task python3/197
Call Trace:
sctp_outq_select_transport+0x549/0x8b0 [sctp]
sctp_outq_flush+0x306/0x2c60 [sctp]
sctp_transport_immediate_rtx+0xaf/0x260 [sctp]
sctp_process_asconf_ack+0xa48/0xf70 [sctp]
Allocated by task 197:
sctp_transport_new+0x68/0x650 [sctp]
sctp_assoc_add_peer+0x258/0x12a0 [sctp]
sctp_process_asconf+0x5e9/0x1090 [sctp]
Last potentially related work creation:
__call_rcu_common.constprop.0+0x77/0xb70
sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp]
sctp_process_asconf+0xd9c/0x1090 [sctp]
The first invalid access was a four-byte read of transport->state at
net/sctp/outqueue.c:833. The same reproducer completed the full
authenticated ASCONF and local-address replacement sequence with this
change without a KASAN report or oops.
Clear new_transport when its peer is removed, before it can be used to
create the HEARTBEAT. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Take cgroup_lock() first in scx_cgroup_lock()
scx_cgroup_lock() write-locks scx_cgroup_ops_rwsem and then takes
cgroup_lock(), which can deadlock through kernfs:
scx enable/disable cgroup rmdir cpu.weight write
------------------ ------------ ----------------
cgroup_lock()
percpu_down_write(rwsem)
cgroup_lock()
kernfs_get_active()
percpu_down_read(rwsem)
kernfs_drain()
The enable path waits for the rmdir to release cgroup_mutex. The rmdir,
deactivating the cpu controller's files, waits in kernfs_drain() for the
write's active reference. The write, in scx_group_set_weight(), waits for
the rwsem behind the pending writer.
Take cgroup_lock() first. The set_* paths take no cgroup locks inside the
read side, so a pending write-lock then only waits for read sections that
always run to completion, and no dependency from the rwsem back to
cgroup_mutex remains. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer()
In rb_allocate_cpu_buffer(), bpage->order was omitted, leaving it as 0.
This is an issue for a ring-buffer with subbufs bigger than PAGE_SIZE if
when freed: free_buffer_page() relies on this value. Align the value
with the actual allocation size (buffer::subbuf_order). |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: don't warn when the mount is completed from another user namespace
fsopen() records the caller's user namespace in fc->user_ns and hands
back an ordinary file descriptor. Nothing ties the task that calls
fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The
fd is inherited across fork() and exec() and it can be passed over a
unix socket.
Completing a context from another user namespace is allowed on purpose.
vfs_cmd_create() authorizes the create with mount_capable(), which for
FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that
succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns.
So an unprivileged task can reach the WARN_ON() in ovl_fill_super():
create a user and a mount namespace in a child, call fsopen("overlay")
there, send the fscontext fd to the parent and let the parent issue
FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no
capability is needed anywhere:
WARNING: fs/overlayfs/super.c:1551 at ovl_fill_super+0x7b9/0x1e20 [overlay]
CPU: 3 UID: 1000 PID: 3243376 Comm: fswarn
Call Trace:
get_tree_nodev+0x71/0xa0
ovl_get_tree+0x15/0x20 [overlay]
vfs_get_tree+0x2a/0x100
vfs_cmd_create+0x60/0xf0
__do_sys_fsconfig+0x4b2/0x500
The child needs the mount namespace because fsopen() itself gates on
may_mount(), which asks for CAP_SYS_ADMIN in the user namespace owning
the caller's mount namespace. fsconfig() doesn't repeat that check.
It is a WARN_ON() and not a WARN_ON_ONCE(), so the condition can be
raised in a loop to taint the kernel and flood the log, and it panics a
kernel booted with panic_on_warn.
Keep refusing the mount and stop warning about it. ovl_parse_param()
already spells a user namespace check this way for Opt_override_creds. |
| In the Linux kernel, the following vulnerability has been resolved:
net: atlantic: free stranded TX buffers on ring deinit
aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean()
call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and
stops at hw_head, which no longer moves once aq_vec_stop() has stopped
the hardware and NAPI. Completed descriptors beyond the budget and
everything still posted in [hw_head, sw_tail) keep their skb or
xdp_frame when the interface goes down: aq_vec_ring_free() then frees
the buffer ring and the references are lost for good.
Today this is a silent memory leak on every interface down under
TX/XDP_TX load. With the conversion of the RX path to page_pool posted
for net-next it becomes much more visible: XDP_TX frames carry fragment
references on the RX ring's page_pool, so a single stranded frame keeps
the pool's inflight count above zero forever. page_pool_destroy() then
never completes, the pool is leaked together with its pages, and
"page_pool_release_retry() stalled pool shutdown" is warned every 60
seconds from that point on, on every ifdown, XDP detach or ring resize
under XDP_TX load.
Bring back aq_ring_tx_deinit() as it was before the removal and use it
for teardown again, with one extension: TX rings can hold xdp_frames
nowadays, so release those too. They are returned with
xdp_return_frame() since this runs in process context. |
| In the Linux kernel, the following vulnerability has been resolved:
rqspinlock: Reset tail when preserving queue on deadlock
Currently, the destruction of the waiter queue is suppressed for
rqspinlock in cases where a deadlock is detected. Deadlock checks happen
relatively frequently (on entry for AA, within 1ms for ABBA), and waiter
threads may not be involved in locking scenarios involving deadlocks.
Thus, it is useful to not flush the queue and let other waiters take a
stab at acquiring the lock after we detect a deadlock and exit.
However, we need to follow the same logic as what we did previously for
the waitq_timeout label: reset the tail, and if we cannot, signal the
next waiter appropriately. In case of deadlocks, this signal would just
mark the MCS node as unlocked, and in case of timeouts, it would signal
RES_TIMEOUT_VAL. The difference thus is in the value propagated, which
decides whether the queue remains active or gets flushed.
Not doing the tail reset, and waiting for the next waiter can lead to
cases where we are the final waiter, and thus no next waiter arrives,
leading to intermittent stalls in this path. Once the next waiter does
join, we will be unblocked. In the theoretical case when the next waiter
never joins, we risk stalling indefinitely.
This can only happen for ABBA deadlocks, since entry into the wait queue
is guarded with AA checks. A precise sequence of executions leading up
to this scenario can be:
CPU 0 holds lock A.
CPU 1 holds lock B.
CPU 2 attempts lock B, becomes the pending waiter for B.
CPU 0 attempts lock B. B has locked+pending bits set, thus CPU 0 queues.
CPU 1 attempts lock A.
CPU 0 detects an ABBA deadlock.
Once deadlock detection happens for CPU 0, it will sit waiting for the
next waiter in the queue to populate node->next, which will experience
delays until such a waiter arrives.
Fix this by adjusting the logic for the check for deadlocks preceding
the waitq_timeout label. It would make sense to consolidate code for
both cases and use 'ret' to distinguish the value being propagated, but
that is left as an exercise for a future refactoring task to avoid diff
noise in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: prestera: validate firmware header length
prestera_fw_hdr_parse() reads the firmware header before checking
that the firmware image contains that header.
Reject images shorter than struct prestera_fw_header before decoding the
magic and version fields. |
| A flaw was found in libdm. A local attacker could craft a malicious Logical Volume Manager (LVM) metadata configuration with deeply nested structures. This could lead to uncontrolled recursion in the libdm configuration file parser, exhausting the stack and causing any LVM command reading the metadata to crash. This vulnerability results in a Denial of Service (DoS) for affected systems. |
| HAProxy Community Edition 3.2.x through 3.3.x before 3.3.3 can enter a loop or crash because varint is mishandled. HAProxy Enterprise and ALOHA are also affected. |
| HAProxy Community Edition 3.0 through 3.3 before 3.3.3 lacks a length check for the NEW_TOKEN format. HAProxy Enterprise and ALOHA are also affected. |
| Clickjacking issue in the Downloads component in Firefox for Android. This vulnerability was fixed in Firefox 154. |
| Spoofing issue in the Downloads component in Firefox for Android. This vulnerability was fixed in Firefox 154. |
| mcp-shell is an MCP server for running shell commands securely, auditably, and on demand. Prior to 0.6.0, the default Docker security.yaml includes /bin/bash in allowed_executables, while security.go validates only the first token and checkBlockedPatternsAndCommands does not reject the shell command-mode flag -c. A caller of the shell_exec MCP tool can provide the command argument `/bin/bash -c <arbitrary-command>`, which passes validation and reaches executor.go, where parseCommand and exec.CommandContext execute the arbitrary command as mcpuser outside the intended allowlist. This issue is fixed in version 0.6.0. |
| Privilege escalation in the Enterprise Policies component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| Site isolation issue in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| mcp-shell is an MCP server for running shell commands securely, auditably, and on demand. Prior to 0.6.0, the default security.yaml allows /usr/bin/git, while security.go omits ! from containsShellMetacharacters and containsDangerousShellConstructs and applies no per-executable argument policy. A caller of the shell_exec MCP tool can provide the command argument /usr/bin/git -c alias.pwn=!<arbitrary-command>, causing Git to create a shell alias and execute arbitrary OS commands as the mcp-shell process user. The default Docker image runs as mcpuser with Git installed and secure mode enabled, so the bypass is exploitable in the default deployment without additional authentication beyond MCP connectivity. This issue is fixed in version 0.6.0. |
| Integer overflow in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1. |
| NoteGen before 0.32.0 grants the Tauri shell plugin shell:allow-execute capability for bash, python, and python3 with arbitrary arguments in the default desktop capabilities. JavaScript running in the application webview can therefore invoke plugin:shell|execute to run attacker-controlled operating system commands with the privileges of the NoteGen process. In combination with script execution in the webview (for example via chat XSS), this enables full remote code execution on the user's machine. |
| NoteGen before 0.32.0 renders AI chat responses with markdown-it configured with html:true and injects the result into the DOM via dangerouslySetInnerHTML in chat-preview, without HTML sanitization and with CSP set to null. Attacker-controlled content that reaches the model prompt (for example a malicious skill REFERENCE.md that instructs the model to emit HTML) can cause the model response to include executable markup such as an img onerror handler. When the user views the chat response, that markup runs as JavaScript in the privileged Tauri webview, enabling arbitrary script execution in the application context (cross-site scripting). |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
tb_drom_parse_entry_port() validates the device-supplied header->index
against sw->config.max_port_number before indexing sw->ports[], but the
sibling field entry->dual_link_port_nr -- a 6-bit value also read from
the DROM -- indexes the same array with no such check. A malicious or
malformed Thunderbolt device can set dual_link_port_nr beyond the
allocated sw->ports[] (max_port_number + 1 entries), producing an
out-of-bounds tb_port pointer that is stored and later dereferenced.
Reject a port entry whose dual_link_port_nr exceeds max_port_number,
the same bound already applied to header->index. |
