| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix UAF via dangling GEM handle in create_bo
rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via
drm_gem_handle_create() early on, then performs several operations that
can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after
the handle is live, the error path calls drm_gem_shmem_object_free()
which kfree's the object without removing the handle from the IDR.
This leaves a dangling handle pointing to freed slab memory. Any
subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls
drm_gem_object_lookup() and dereferences freed memory (UAF).
Fix by moving drm_gem_handle_create() to after all fallible operations
succeed, matching the pattern used by panfrost, lima, and etnaviv.
Also fix drm_mm_insert_node_generic() whose return value was silently
overwritten by iommu_map_sgtable() on the next line. Add the missing
error check.
[tomeu: Move handle creation to the very end] |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix durable reconnect error path file lifetime
After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes
the same ksmbd_file into the session volatile-id table. If smb2_open()
then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp)
and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp).
In this case fp and dh_info.fp are the same object. The first put drops the
reconnect lookup reference, but the final durable put can run
__ksmbd_close_fd(NULL, fp). Because the final close is not session-aware,
it can free the file object without removing the volatile-id entry that was
just published into the session table.
Use the session-aware put for the final reconnect drop when the reconnect
had already succeeded and the error path is cleaning up the republished
file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep
using the durable-only put path. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: fix a potential use-after-free
On error we free aggr->lookups->dev_id before removing the entry from
the lookup table. If a concurrent thread calls gpiod_find() before we
remove the entry, it could iterate over the list and call
gpiod_match_lookup_table() which unconditionally dereferences dev_id
when calling strcmp(). Reverse the order of cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Fix unregister_fprobe() to wait for RCU grace period
Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod. |
| Use after free in Skia in Google Chrome prior to 150.0.7871.125 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
The aoe driver (or similar) generates a non-IPv6 packet
(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()
on a 6LoWPAN interface (configured by the user or test case).
Since the packet is not IPv6, the 6LoWPAN header_ops->create function
(lowpan_header_create or header_create) returns early without initializing
the lowpan_addr_info structure in the skb headroom.
In the transmit function (lowpan_xmit), the driver calls lowpan_header
(or setup_header) which unconditionally copies and uses the lowpan_addr_info
from the headroom, which contains uninitialized data.
Fix this by dropping non IPv6 packets.
A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs: Fix use-after-free in path file creation cleanup
In the error path of rtrs_srv_create_path_files(), the sysfs root folders
may already have been created and srv_path->kobj may already have been
initialized. If a later step fails, the cleanup currently calls
kobject_put(&srv_path->kobj) before
rtrs_srv_destroy_once_sysfs_root_folders(srv_path).
kobject_put() may drop the last reference to srv_path->kobj and invoke the
release callback, rtrs_srv_release(), which frees srv_path. The following
call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then
dereferences srv_path internally to access srv_path->srv, resulting in a
use-after-free.
This failure path is reached before rtrs_srv_create_path_files() returns
success, so the successful-path lifetime handling is not involved.
Fix this by destroying the sysfs root folders before calling
kobject_put(&srv_path->kobj), so srv_path is still valid while the helper
accesses it.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release layout stid on setlease failure
nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via
idr_alloc_cyclic() under cl_lock before returning to
nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then
fails, the error path frees the layout stateid directly with
kmem_cache_free() without ever calling idr_remove(), leaving the
IDR slot pointing at freed slab memory. Any subsequent IDR walker
(states_show, client teardown) dereferences the dangling pointer.
The correct teardown for an IDR-published stid is nfs4_put_stid(),
which removes the IDR slot under cl_lock, dispatches sc_free
(nfsd4_free_layout_stateid) to release ls->ls_file via
nfsd4_close_layout(), and drops the nfs4_file reference in its
tail.
A second issue blocks that switch: nfsd4_free_layout_stateid()
unconditionally inspects ls->ls_fence_work via
delayed_work_pending() under ls_lock, but
INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only
after the setlease call. On the setlease-failure path the
destructor would touch an uninitialized delayed_work.
nfsd4_alloc_layout_stateid()
nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */
nfsd4_layout_setlease() /* fails */
nfs4_put_stid()
nfsd4_free_layout_stateid()
delayed_work_pending(&ls->ls_fence_work) /* needs INIT */
nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */
put_nfs4_file()
Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK
initialization above the nfsd4_layout_setlease() call, and replace
the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup
with a single nfs4_put_stid(stp). |
| In the Linux kernel, the following vulnerability has been resolved:
eventpoll: fix ep_remove struct eventpoll / struct file UAF
ep_remove() (via ep_remove_file()) cleared file->f_ep under
file->f_lock but then kept using @file inside the critical section
(is_file_epoll(), hlist_del_rcu() through the head, spin_unlock).
A concurrent __fput() taking the eventpoll_release() fastpath in
that window observed the transient NULL, skipped
eventpoll_release_file() and ran to f_op->release / file_free().
For the epoll-watches-epoll case, f_op->release is
ep_eventpoll_release() -> ep_clear_and_put() -> ep_free(), which
kfree()s the watched struct eventpoll. Its embedded ->refs
hlist_head is exactly where epi->fllink.pprev points, so the
subsequent hlist_del_rcu()'s "*pprev = next" scribbles into freed
kmalloc-192 memory.
In addition, struct file is SLAB_TYPESAFE_BY_RCU, so the slot
backing @file could be recycled by alloc_empty_file() --
reinitializing f_lock and f_ep -- while ep_remove() is still
nominally inside that lock. The upshot is an attacker-controllable
kmem_cache_free() against the wrong slab cache.
Pin @file via epi_fget() at the top of ep_remove() and gate the
critical section on the pin succeeding. With the pin held @file
cannot reach refcount zero, which holds __fput() off and
transitively keeps the watched struct eventpoll alive across the
hlist_del_rcu() and the f_lock use, closing both UAFs.
If the pin fails @file has already reached refcount zero and its
__fput() is in flight. Because we bailed before clearing f_ep,
that path takes the eventpoll_release() slow path into
eventpoll_release_file() and blocks on ep->mtx until the waiter
side's ep_clear_and_put() drops it. The bailed epi's share of
ep->refcount stays intact, so the trailing ep_refcount_dec_and_test()
in ep_clear_and_put() cannot free the eventpoll out from under
eventpoll_release_file(); the orphaned epi is then cleaned up
there.
A successful pin also proves we are not racing
eventpoll_release_file() on this epi, so drop the now-redundant
re-check of epi->dying under f_lock. The cheap lockless
READ_ONCE(epi->dying) fast-path bailout stays. |
| In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Use waiter::task instead of current in remove_waiter()
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ] |
| Information disclosure due to uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Information disclosure due to uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| ForgeCode (tailcallhq/forgecode), an AI pair-programming CLI, automatically loads and executes the MCP servers defined in a repository's .mcp.json file on startup without user confirmation. A malicious repository can supply a crafted .mcp.json whose mcpServers entries specify arbitrary command and args values (for example, command: bash with args: ['-c', 'touch /tmp/pwned']). When a user runs the forge CLI inside a cloned untrusted repository, the specified commands are spawned with the invoking user's privileges, resulting in arbitrary code execution. This provides a reliable initial-access and persistence primitive against developers who evaluate untrusted repositories with ForgeCode. |
| A use-after-free vulnerability was found in libxslt while parsing xsl nodes that may lead to the dereference of expired pointers and application crash. |
| Invalid pointer in the DOM: Bindings (WebIDL) component. This vulnerability was fixed in Firefox 153, Firefox ESR 115.38, Firefox ESR 140.13, Thunderbird 153, and Thunderbird 140.13. |
| A flaw was found in GnuTLS. The `gnutls_pkcs11_token_set_pin` function, used for changing the Security Officer PIN, can lead to a use-after-free vulnerability. This occurs when an attacker attempts to change the PIN with a NULL old PIN for a token that lacks a protected authentication path. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: do not reuse cached ip_hdr() value after skb_tunnel_check_pmtu()
skb_tunnel_check_pmtu() can change skb->head.
Reusing old_iph afer skb_tunnel_check_pmtu() can cause an UAF.
Use instead ip_hdr(skb) as done in drivers/net/bareudp.c
and drivers/net/geneve.c.
Found by Sashiko. |
| PraisonAI is a multi-agent teams system. The v4.6.32 chokepoint refactor (which patched CVE-2026-44334 / GHSA-xcmw-grxf-wjhj) added the PRAISONAI_ALLOW_LOCAL_TOOLS env-var gate to the tool_override.py sinks. However, two additional spec.loader.exec_module call sites in praisonai/agents_generator.py were missed and remain completely unguarded in versions prior to 4.6.40. Both functions accept a module_path parameter sourced from YAML configuration and execute it without validation, signature checking, or the env-var gate. Version 4.6.40 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix setup list UAF on proc write error
snd_pcm_oss_proc_write() links a newly allocated setup entry into the
OSS setup list before duplicating the task name. If the task-name
allocation fails, the error path frees the already linked entry and
leaves setup_list pointing at freed memory.
A later OSS device open can then walk the stale list entry in
snd_pcm_oss_look_for_setup() and dereference freed memory.
Allocate the task name and initialize the setup entry before publishing
the entry on setup_list. Also fetch the initial proc read iterator only
after taking setup_mutex, so all setup_list traversal follows the same
list lifetime rules. |
