| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Initialize free_qp completion before using it
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix circular locking dependency in nci_close_device
nci_close_device() flushes rx_wq and tx_wq while holding req_lock.
This causes a circular locking dependency because nci_rx_work()
running on rx_wq can end up taking req_lock too:
nci_rx_work -> nci_rx_data_packet -> nci_data_exchange_complete
-> __sk_destruct -> rawsock_destruct -> nfc_deactivate_target
-> nci_deactivate_target -> nci_request -> mutex_lock(&ndev->req_lock)
Move the flush of rx_wq after req_lock has been released.
This should safe (I think) because NCI_UP has already been cleared
and the transport is closed, so the work will see it and return
-ENETDOWN.
NIPA has been hitting this running the nci selftest with a debug
kernel on roughly 4% of the runs. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: fix skb leak with espintcp and async crypto
When the TX queue for espintcp is full, esp_output_tail_tcp will
return an error and not free the skb, because with synchronous crypto,
the common xfrm output code will drop the packet for us.
With async crypto (esp_output_done), we need to drop the skb when
esp_output_tail_tcp returns an error. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: use generic driver_override infrastructure
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n". |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: use the current queue number for stats
There's a potential mismatch between the memory reserved for statistics
and the amount of memory written.
gem_get_sset_count() correctly computes the number of stats based on the
active queues, whereas gem_get_ethtool_stats() indiscriminately copies
data using the maximum number of queues, and in the case the number of
active queues is less than MACB_MAX_QUEUES, this results in a OOB write
as observed in the KASAN splat.
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in gem_get_ethtool_stats+0x54/0x78
[macb]
Write of size 760 at addr ffff80008080b000 by task ethtool/1027
CPU: [...]
Tainted: [E]=UNSIGNED_MODULE
Hardware name: raspberrypi rpi/rpi, BIOS 2025.10 10/01/2025
Call trace:
show_stack+0x20/0x38 (C)
dump_stack_lvl+0x80/0xf8
print_report+0x384/0x5e0
kasan_report+0xa0/0xf0
kasan_check_range+0xe8/0x190
__asan_memcpy+0x54/0x98
gem_get_ethtool_stats+0x54/0x78 [macb
926c13f3af83b0c6fe64badb21ec87d5e93fcf65]
dev_ethtool+0x1220/0x38c0
dev_ioctl+0x4ac/0xca8
sock_do_ioctl+0x170/0x1d8
sock_ioctl+0x484/0x5d8
__arm64_sys_ioctl+0x12c/0x1b8
invoke_syscall+0xd4/0x258
el0_svc_common.constprop.0+0xb4/0x240
do_el0_svc+0x48/0x68
el0_svc+0x40/0xf8
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1b0/0x1b8
The buggy address belongs to a 1-page vmalloc region starting at
0xffff80008080b000 allocated at dev_ethtool+0x11f0/0x38c0
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff00000a333000 pfn:0xa333
flags: 0x7fffc000000000(node=0|zone=0|lastcpupid=0x1ffff)
raw: 007fffc000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff00000a333000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff80008080b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff80008080b100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff80008080b180: 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffff80008080b200: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffff80008080b280: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
Fix it by making sure the copied size only considers the active number of
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_expect: skip expectations in other netns via proc
Skip expectations that do not reside in this netns.
Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's
conntrack entries via proc"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: Avoid releasing netdev before teardown completes
The patch cited in the Fixes tag below changed the teardown code for
OVS ports to no longer unconditionally take the RTNL. After this change,
the netdev_destroy() callback can proceed immediately to the call_rcu()
invocation if the IFF_OVS_DATAPATH flag is already cleared on the
netdev.
The ovs_netdev_detach_dev() function clears the flag before completing
the unregistration, and if it gets preempted after clearing the flag (as
can happen on an -rt kernel), netdev_destroy() can complete and the
device can be freed before the unregistration completes. This leads to a
splat like:
[ 998.393867] Oops: general protection fault, probably for non-canonical address 0xff00000001000239: 0000 [#1] SMP PTI
[ 998.393877] CPU: 42 UID: 0 PID: 55177 Comm: ip Kdump: loaded Not tainted 6.12.0-211.1.1.el10_2.x86_64+rt #1 PREEMPT_RT
[ 998.393886] Hardware name: Dell Inc. PowerEdge R740/0JMK61, BIOS 2.24.0 03/27/2025
[ 998.393889] RIP: 0010:dev_set_promiscuity+0x8d/0xa0
[ 998.393901] Code: 00 00 75 d8 48 8b 53 08 48 83 ba b0 02 00 00 00 75 ca 48 83 c4 08 5b c3 cc cc cc cc 48 83 bf 48 09 00 00 00 75 91 48 8b 47 08 <48> 83 b8 b0 02 00 00 00 74 97 eb 81 0f 1f 80 00 00 00 00 90 90 90
[ 998.393906] RSP: 0018:ffffce5864a5f6a0 EFLAGS: 00010246
[ 998.393912] RAX: ff00000000ffff89 RBX: ffff894d0adf5a05 RCX: 0000000000000000
[ 998.393917] RDX: 0000000000000000 RSI: 00000000ffffffff RDI: ffff894d0adf5a05
[ 998.393921] RBP: ffff894d19252000 R08: ffff894d19252000 R09: 0000000000000000
[ 998.393924] R10: ffff894d19252000 R11: ffff894d192521b8 R12: 0000000000000006
[ 998.393927] R13: ffffce5864a5f738 R14: 00000000ffffffe2 R15: 0000000000000000
[ 998.393931] FS: 00007fad61971800(0000) GS:ffff894cc0140000(0000) knlGS:0000000000000000
[ 998.393936] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 998.393940] CR2: 000055df0a2a6e40 CR3: 000000011c7fe003 CR4: 00000000007726f0
[ 998.393944] PKRU: 55555554
[ 998.393946] Call Trace:
[ 998.393949] <TASK>
[ 998.393952] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393961] ? show_trace_log_lvl+0x1b0/0x2f0
[ 998.393975] ? dp_device_event+0x41/0x80 [openvswitch]
[ 998.394009] ? __die_body.cold+0x8/0x12
[ 998.394016] ? die_addr+0x3c/0x60
[ 998.394027] ? exc_general_protection+0x16d/0x390
[ 998.394042] ? asm_exc_general_protection+0x26/0x30
[ 998.394058] ? dev_set_promiscuity+0x8d/0xa0
[ 998.394066] ? ovs_netdev_detach_dev+0x3a/0x80 [openvswitch]
[ 998.394092] dp_device_event+0x41/0x80 [openvswitch]
[ 998.394102] notifier_call_chain+0x5a/0xd0
[ 998.394106] unregister_netdevice_many_notify+0x51b/0xa60
[ 998.394110] rtnl_dellink+0x169/0x3e0
[ 998.394121] ? rt_mutex_slowlock.constprop.0+0x95/0xd0
[ 998.394125] rtnetlink_rcv_msg+0x142/0x3f0
[ 998.394128] ? avc_has_perm_noaudit+0x69/0xf0
[ 998.394130] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 998.394132] netlink_rcv_skb+0x50/0x100
[ 998.394138] netlink_unicast+0x292/0x3f0
[ 998.394141] netlink_sendmsg+0x21b/0x470
[ 998.394145] ____sys_sendmsg+0x39d/0x3d0
[ 998.394149] ___sys_sendmsg+0x9a/0xe0
[ 998.394156] __sys_sendmsg+0x7a/0xd0
[ 998.394160] do_syscall_64+0x7f/0x170
[ 998.394162] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 998.394165] RIP: 0033:0x7fad61bf4724
[ 998.394188] Code: 89 02 b8 ff ff ff ff eb bb 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 80 3d c5 e9 0c 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 89 54 24 1c 48 89
[ 998.394189] RSP: 002b:00007ffd7e2f7cb8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 998.394191] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fad61bf4724
[ 998.394193] RDX: 0000000000000000 RSI: 00007ffd7e2f7d20 RDI: 0000000000000003
[ 998.394194] RBP: 00007ffd7e2f7d90 R08: 0000000000000010 R09: 000000000000003f
[ 998.394195] R10: 000055df11558010 R11: 0000000000000202 R12: 00007ffd7e2
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Validate PDU length before reading SDU length in l2cap_ecred_data_rcv()
l2cap_ecred_data_rcv() reads the SDU length field from skb->data using
get_unaligned_le16() without first verifying that skb contains at least
L2CAP_SDULEN_SIZE (2) bytes. When skb->len is less than 2, this reads
past the valid data in the skb.
The ERTM reassembly path correctly calls pskb_may_pull() before reading
the SDU length (l2cap_reassemble_sdu, L2CAP_SAR_START case). Apply the
same validation to the Enhanced Credit Based Flow Control data path. |
| In the Linux kernel, the following vulnerability has been resolved:
NFC: nxp-nci: allow GPIOs to sleep
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 -- |
| In the Linux kernel, the following vulnerability has been resolved:
net: bonding: fix NULL deref in bond_debug_rlb_hash_show
rlb_clear_slave intentionally keeps RLB hash-table entries on
the rx_hashtbl_used_head list with slave set to NULL when no
replacement slave is available. However, bond_debug_rlb_hash_show
visites client_info->slave without checking if it's NULL.
Other used-list iterators in bond_alb.c already handle this NULL-slave
state safely:
- rlb_update_client returns early on !client_info->slave
- rlb_req_update_slave_clients, rlb_clear_slave, and rlb_rebalance
compare slave values before visiting
- lb_req_update_subnet_clients continues if slave is NULL
The following NULL deref crash can be trigger in
bond_debug_rlb_hash_show:
[ 1.289791] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 1.292058] RIP: 0010:bond_debug_rlb_hash_show (drivers/net/bonding/bond_debugfs.c:41)
[ 1.293101] RSP: 0018:ffffc900004a7d00 EFLAGS: 00010286
[ 1.293333] RAX: 0000000000000000 RBX: ffff888102b48200 RCX: ffff888102b48204
[ 1.293631] RDX: ffff888102b48200 RSI: ffffffff839daad5 RDI: ffff888102815078
[ 1.293924] RBP: ffff888102815078 R08: ffff888102b4820e R09: 0000000000000000
[ 1.294267] R10: 0000000000000000 R11: 0000000000000000 R12: ffff888100f929c0
[ 1.294564] R13: ffff888100f92a00 R14: 0000000000000001 R15: ffffc900004a7ed8
[ 1.294864] FS: 0000000001395380(0000) GS:ffff888196e75000(0000) knlGS:0000000000000000
[ 1.295239] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.295480] CR2: 0000000000000000 CR3: 0000000102adc004 CR4: 0000000000772ef0
[ 1.295897] Call Trace:
[ 1.296134] seq_read_iter (fs/seq_file.c:231)
[ 1.296341] seq_read (fs/seq_file.c:164)
[ 1.296493] full_proxy_read (fs/debugfs/file.c:378 (discriminator 1))
[ 1.296658] vfs_read (fs/read_write.c:572)
[ 1.296981] ksys_read (fs/read_write.c:717)
[ 1.297132] do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
[ 1.297325] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Add a NULL check and print "(none)" for entries with no assigned slave. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create
We have recently observed a number of subvolumes with broken dentries.
ls-ing the parent dir looks like:
drwxrwxrwt 1 root root 16 Jan 23 16:49 .
drwxr-xr-x 1 root root 24 Jan 23 16:48 ..
d????????? ? ? ? ? ? broken_subvol
and similarly stat-ing the file fails.
In this state, deleting the subvol fails with ENOENT, but attempting to
create a new file or subvol over it errors out with EEXIST and even
aborts the fs. Which leaves us a bit stuck.
dmesg contains a single notable error message reading:
"could not do orphan cleanup -2"
2 is ENOENT and the error comes from the failure handling path of
btrfs_orphan_cleanup(), with the stack leading back up to
btrfs_lookup().
btrfs_lookup
btrfs_lookup_dentry
btrfs_orphan_cleanup // prints that message and returns -ENOENT
After some detailed inspection of the internal state, it became clear
that:
- there are no orphan items for the subvol
- the subvol is otherwise healthy looking, it is not half-deleted or
anything, there is no drop progress, etc.
- the subvol was created a while ago and does the meaningful first
btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much
later.
- after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT,
which results in a negative dentry for the subvolume via
d_splice_alias(NULL, dentry), leading to the observed behavior. The
bug can be mitigated by dropping the dentry cache, at which point we
can successfully delete the subvolume if we want.
i.e.,
btrfs_lookup()
btrfs_lookup_dentry()
if (!sb_rdonly(inode->vfs_inode)->vfs_inode)
btrfs_orphan_cleanup(sub_root)
test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
btrfs_search_slot() // finds orphan item for inode N
...
prints "could not do orphan cleanup -2"
if (inode == ERR_PTR(-ENOENT))
inode = NULL;
return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume
btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP)
on the root when it runs, so it cannot run more than once on a given
root, so something else must run concurrently. However, the obvious
routes to deleting an orphan when nlinks goes to 0 should not be able to
run without first doing a lookup into the subvolume, which should run
btrfs_orphan_cleanup() and set the bit.
The final important observation is that create_subvol() calls
d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if
the dentry cache gets dropped, the next lookup into the subvolume will
make a real call into btrfs_orphan_cleanup() for the first time. This
opens up the possibility of concurrently deleting the inode/orphan items
but most typical evict() paths will be holding a reference on the parent
dentry (child dentry holds parent->d_lockref.count via dget in
d_alloc(), released in __dentry_kill()) and prevent the parent from
being removed from the dentry cache.
The one exception is delayed iputs. Ordered extent creation calls
igrab() on the inode. If the file is unlinked and closed while those
refs are held, iput() in __dentry_kill() decrements i_count but does
not trigger eviction (i_count > 0). The child dentry is freed and the
subvol dentry's d_lockref.count drops to 0, making it evictable while
the inode is still alive.
Since there are two races (the race between writeback and unlink and
the race between lookup and delayed iputs), and there are too many moving
parts, the following three diagrams show the complete picture.
(Only the second and third are races)
Phase 1:
Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set
btrfs_mksubvol()
lookup_one_len()
__lookup_slow()
d_alloc_parallel()
__d_alloc() // d_lockref.count = 1
create_subvol(dentry)
// doesn't touch the bit..
d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix undefined behavior in interpreter sdiv/smod for INT_MIN
The BPF interpreter's signed 32-bit division and modulo handlers use
the kernel abs() macro on s32 operands. The abs() macro documentation
(include/linux/math.h) explicitly states the result is undefined when
the input is the type minimum. When DST contains S32_MIN (0x80000000),
abs((s32)DST) triggers undefined behavior and returns S32_MIN unchanged
on arm64/x86. This value is then sign-extended to u64 as
0xFFFFFFFF80000000, causing do_div() to compute the wrong result.
The verifier's abstract interpretation (scalar32_min_max_sdiv) computes
the mathematically correct result for range tracking, creating a
verifier/interpreter mismatch that can be exploited for out-of-bounds
map value access.
Introduce abs_s32() which handles S32_MIN correctly by casting to u32
before negating, avoiding signed overflow entirely. Replace all 8
abs((s32)...) call sites in the interpreter's sdiv32/smod32 handlers.
s32 is the only affected case -- the s64 division/modulo handlers do
not use abs(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gt: Check set_default_submission() before deferencing
When the i915 driver firmware binaries are not present, the
set_default_submission pointer is not set. This pointer is
dereferenced during suspend anyways.
Add a check to make sure it is set before dereferencing.
[ 23.289926] PM: suspend entry (deep)
[ 23.293558] Filesystems sync: 0.000 seconds
[ 23.298010] Freezing user space processes
[ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds)
[ 23.309766] OOM killer disabled.
[ 23.313027] Freezing remaining freezable tasks
[ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 23.342038] serial 00:05: disabled
[ 23.345719] serial 00:02: disabled
[ 23.349342] serial 00:01: disabled
[ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 23.361635] ata1.00: Entering standby power mode
[ 23.368863] ata2.00: Entering standby power mode
[ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 23.452194] #PF: supervisor instruction fetch in kernel mode
[ 23.457896] #PF: error_code(0x0010) - not-present page
[ 23.463065] PGD 0 P4D 0
[ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI
[ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary)
[ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
[ 23.496511] Workqueue: async async_run_entry_fn
[ 23.501087] RIP: 0010:0x0
[ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6.
[ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246
[ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f
[ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000
[ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff
[ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8
[ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68
[ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000
[ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0
[ 23.572539] PKRU: 55555554
[ 23.575281] Call Trace:
[ 23.577770] <TASK>
[ 23.579905] intel_engines_reset_default_submission+0x42/0x60
[ 23.585695] __intel_gt_unset_wedged+0x191/0x200
[ 23.590360] intel_gt_unset_wedged+0x20/0x40
[ 23.594675] gt_sanitize+0x15e/0x170
[ 23.598290] i915_gem_suspend_late+0x6b/0x180
[ 23.602692] i915_drm_suspend_late+0x35/0xf0
[ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10
[ 23.611843] dpm_run_callback+0x78/0x1c0
[ 23.615817] device_suspend_late+0xde/0x2e0
[ 23.620037] async_suspend_late+0x18/0x30
[ 23.624082] async_run_entry_fn+0x25/0xa0
[ 23.628129] process_one_work+0x15b/0x380
[ 23.632182] worker_thread+0x2a5/0x3c0
[ 23.635973] ? __pfx_worker_thread+0x10/0x10
[ 23.640279] kthread+0xf6/0x1f0
[ 23.643464] ? __pfx_kthread+0x10/0x10
[ 23.647263] ? __pfx_kthread+0x10/0x10
[ 23.651045] ret_from_fork+0x131/0x190
[ 23.654837] ? __pfx_kthread+0x10/0x10
[ 23.658634] ret_from_fork_asm+0x1a/0x30
[ 23.662597] </TASK>
[ 23.664826] Modules linked in:
[ 23.667914] CR2: 0000000000000000
[ 23.671271] ------------[ cut here ]------------
(cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad) |
| In the Linux kernel, the following vulnerability has been resolved:
x86/platform/uv: Handle deconfigured sockets
When a socket is deconfigured, it's mapped to SOCK_EMPTY (0xffff). This causes
a panic while allocating UV hub info structures.
Fix this by using NUMA_NO_NODE, allowing UV hub info structures to be
allocated on valid nodes. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: apple: avoid memory leak in apple_report_fixup()
The apple_report_fixup() function was returning a
newly kmemdup()-allocated buffer, but never freeing it.
The caller of report_fixup() does not take ownership of the returned
pointer, but it *is* permitted to return a sub-portion of the input
rdesc, whose lifetime is managed by the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: ensure we're polling a polled queue
A user can change the polled queue count at run time. There's a brief
window during a reset where a hipri task may try to poll that queue
before the block layer has updated the queue maps, which would race with
the now interrupt driven queue and may cause double completions. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: avoid memory leak in asus_report_fixup()
The asus_report_fixup() function was returning a newly allocated
kmemdup()-allocated buffer, but never freeing it. Switch to
devm_kzalloc() to ensure the memory is managed and freed automatically
when the device is removed.
The caller of report_fixup() does not take ownership of the returned
pointer, but it is permitted to return a pointer whose lifetime is at
least that of the input buffer.
Also fix a harmless out-of-bounds read by copying only the original
descriptor size. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Make sure to use pmu_ctx->pmu for groups
Oliver reported that x86_pmu_del() ended up doing an out-of-bound memory access
when group_sched_in() fails and needs to roll back.
This *should* be handled by the transaction callbacks, but he found that when
the group leader is a software event, the transaction handlers of the wrong PMU
are used. Despite the move_group case in perf_event_open() and group_sched_in()
using pmu_ctx->pmu.
Turns out, inherit uses event->pmu to clone the events, effectively undoing the
move_group case for all inherited contexts. Fix this by also making inherit use
pmu_ctx->pmu, ensuring all inherited counters end up in the same pmu context.
Similarly, __perf_event_read() should use equally use pmu_ctx->pmu for the
group case. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Ensure swevent hrtimer is properly destroyed
With the change to hrtimer_try_to_cancel() in
perf_swevent_cancel_hrtimer() it appears possible for the hrtimer to
still be active by the time the event gets freed.
Make sure the event does a full hrtimer_cancel() on the free path by
installing a perf_event::destroy handler. |
