| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate mesh send advertising payload length
mesh_send() currently bounds MGMT_OP_MESH_SEND by total command
length, but it never verifies that the bytes supplied for the
flexible adv_data[] array actually match the embedded adv_data_len
field. MGMT_MESH_SEND_SIZE only covers the fixed header, so a
truncated command can still pass the existing 20..50 byte range
check and later drive the async mesh send path past the end of the
queued command buffer.
Keep rejecting zero-length and oversized advertising payloads, but
validate adv_data_len explicitly and require the command length to
exactly match the flexible array size before queueing the request. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: convert inline data to extents when truncate exceeds inline size
Add a check in ext4_setattr() to convert files from inline data storage
to extent-based storage when truncate() grows the file size beyond the
inline capacity. This prevents the filesystem from entering an
inconsistent state where the inline data flag is set but the file size
exceeds what can be stored inline.
Without this fix, the following sequence causes a kernel BUG_ON():
1. Mount filesystem with inode that has inline flag set and small size
2. truncate(file, 50MB) - grows size but inline flag remains set
3. sendfile() attempts to write data
4. ext4_write_inline_data() hits BUG_ON(write_size > inline_capacity)
The crash occurs because ext4_write_inline_data() expects inline storage
to accommodate the write, but the actual inline capacity (~60 bytes for
i_block + ~96 bytes for xattrs) is far smaller than the file size and
write request.
The fix checks if the new size from setattr exceeds the inode's actual
inline capacity (EXT4_I(inode)->i_inline_size) and converts the file to
extent-based storage before proceeding with the size change.
This addresses the root cause by ensuring the inline data flag and file
size remain consistent during truncate operations. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| A vulnerability has been found in Vnet/IP Interface Package provided by Yokogawa Electric Corporation.
If affected product receives maliciously crafted packets, Vnet/IP software stack process may be terminated.
The affected products and versions are as follows: Vnet/IP Interface Package (for CENTUM VP R6 VP6C3300, CENTUM VP R7 VP7C3300) R1.07.00 or earlier |
| Insufficient or Incomplete Data Removal in Hardware Component in SEV firmware doesn't fully flush IOMMU. This can potentially lead to a loss of confidentiality and integrity in guest memory. |
| Secure Boot Security Feature Bypass Vulnerability |
| Secure Boot Security Feature Bypass Vulnerability |
| Secure Boot Security Feature Bypass Vulnerability |
| Secure Boot Security Feature Bypass Vulnerability |
| An issue in ollama v.0.12.10 allows a remote attacker to cause a denial of service via the GGUF decoder |
| An issue in ollama v.0.12.10 allows a remote attacker to cause a denial of service via the fs/ggml/gguf.go, function readGGUFV1String reads a string length from untrusted GGUF metadata |
| An Improper Handling of Length Parameter Inconsistency vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows a logically adjacent BGP peer sending a specifically malformed BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
Only systems configured for Ethernet Virtual Private Networking (EVPN) signaling are vulnerable to this issue.
This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability.This issue affects:
Junos OS:
* all versions before 21.4R3-S11,
* from 22.2 before 22.2R3-S7,
* from 22.4 before 22.4R3-S7,
* from 23.2 before 23.2R2-S4,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S1,
* from 24.4 before 24.4R1-S3, 24.4R2;
Junos OS Evolved:
* all versions before 22.2R3-S7-EVO,
* from 22.4-EVO before 22.4R3-S7-EVO,
* from 23.2-EVO before 23.2R2-S4-EVO,
* from 23.4-EVO before 23.4R2-S5-EVO,
* from 24.2-EVO before 24.2R2-S1-EVO,
* from 24.4-EVO before 24.4R1-S3-EVO, 24.4R2-EVO. |
| An Improper Handling of Length Parameter Inconsistency vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS).
When a device configured for Secure Vector Routing (SVR) receives a specifically malformed packet the PFE will crash and restart.
This issue affects Junos OS on SRX Series:
* All 21.4 versions,
* 22.2 versions before 22.2R3-S6,
* 22.4 versions before 22.4R3-S6,
* 23.2 versions before 23.2R2-S3,
* 23.4 versions before 23.4R2-S4,
* 24.2 versions before 24.2R2.
This issue does not affect versions before 21.4. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. Prior to 2.3.1.2, There is a heap-based buffer overflow in SIccCalcOp::Describe() at IccProfLib/IccMpeCalc.cpp. This vulnerability affects users of the iccDEV library who process ICC color profiles. The vulnerability is fixed in 2.3.1.2. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. Versions prior to 2.3.1.2 have a heap-buffer-overflow vulnerability in `CIccCLUT::Init()` at `IccProfLib/IccTagLut.cpp`. This vulnerability affects users of the iccDEV library who process ICC color profiles. Version 2.3.1.2 contains a patch. No known workarounds are available. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. Versions prior to 2.3.1.2 have a heap-buffer-overflow vulnerability in `SIccCalcOp::Describe()` at `IccProfLib/IccMpeCalc.cpp`. This vulnerability affects users of the iccDEV library who process ICC color profiles. Version 2.3.1.2 contains a patch. No known workarounds are available. |
| iccDEV provides a set of libraries and tools that allow for the interaction, manipulation, and application of International Color Consortium (ICC) color management profiles. Versions prior to 2.3.1.2 have a heap-buffer-overflow vulnerability in `CIccProfileXml::ParseBasic()` at `IccXML/IccLibXML/IccProfileXml.cpp`. This vulnerability affects users of the iccDEV library who process ICC color profiles. Version 2.3.1.2 contains a patch. No known workarounds are available. |
| Mismatched length fields in Zlib compressed protocol headers may allow a read of uninitialized heap memory by an unauthenticated client. This issue affects all MongoDB Server v7.0 prior to 7.0.28 versions, MongoDB Server v8.0 versions prior to 8.0.17, MongoDB Server v8.2 versions prior to 8.2.3, MongoDB Server v6.0 versions prior to 6.0.27, MongoDB Server v5.0 versions prior to 5.0.32, MongoDB Server v4.4 versions prior to 4.4.30, MongoDB Server v4.2 versions greater than or equal to 4.2.0, MongoDB Server v4.0 versions greater than or equal to 4.0.0, and MongoDB Server v3.6 versions greater than or equal to 3.6.0. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: errata: Add Cortex-A520 speculative unprivileged load workaround
Implement the workaround for ARM Cortex-A520 erratum 2966298. On an
affected Cortex-A520 core, a speculatively executed unprivileged load
might leak data from a privileged load via a cache side channel. The
issue only exists for loads within a translation regime with the same
translation (e.g. same ASID and VMID). Therefore, the issue only affects
the return to EL0.
The workaround is to execute a TLBI before returning to EL0 after all
loads of privileged data. A non-shareable TLBI to any address is
sufficient.
The workaround isn't necessary if page table isolation (KPTI) is
enabled, but for simplicity it will be. Page table isolation should
normally be disabled for Cortex-A520 as it supports the CSV3 feature
and the E0PD feature (used when KASLR is enabled). |
| Side-channel information leakage in Navigation and Loading in Google Chrome prior to 139.0.7258.66 allowed a remote attacker to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
