| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenEMR before 8.5.0 contains an authorization bypass vulnerability in portal/lib/download_template.php that allows any authenticated core user to render documents for arbitrary patients by setting isModule. Attackers can submit arbitrary pid and template_id values to disclose patient names, birth dates, chart IDs, addresses, allergies, medications, and problem lists despite ACL and squad restrictions. |
| Site isolation issue in the Graphics: WebRender component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| IBM API Connect 12.1.0.0 through 12.1.1.2 could allow a remote authenticated attacker to modify application API subscriptions due to broken object-level authorization. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow an authenticated user to indirectly disable system auditing, which they otherwise don't have authority to disable. |
| ExcelJS through 4.4.0 contains a denial of service vulnerability that allows attackers to block the event loop by supplying an unbounded sheetId in xl/workbook.xml. Attackers can provide a workbook with a huge sheetId, making the sparse worksheet array walk stall worksheets, getWorksheet and writeBuffer for seconds. |
| exceljs through 4.4.0 contains a denial of service vulnerability that allows attackers to block the event loop by supplying unbounded row r attributes parsed in row-xform.js. Attackers can craft an XLSX file with a row numbered far beyond Excel's limit, making getSheetValues(), workbook writes and CSV export consume time proportional to that number. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zstd: fix lost wakeup when waiting for a workspace
A writer can sleep forever in zstd_get_workspace() even though a workspace
is free. When zstd_alloc_workspace() fails, the task is queued on
zwsm->wait and schedules unconditionally, never re-testing the pool.
zstd_put_workspace() publishes the workspace and then calls cond_wake_up(),
which only wakes when a sleeper is already visible, so a workspace returned
between the failed allocation and prepare_to_wait() wakes nobody. The
window is wide: zstd_alloc_workspace() goes through kvmalloc() and may
enter reclaim.
Only a max level workspace triggers the wakeup and one is deliberately kept
allocated as the fallback every waiter waits for, so once its wakeup is
lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens
to return one. Re-check the pool after prepare_to_wait() has published the
waiter, and use the workspace if one turned up. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing
the zones. If call_zone_finish() then fails it returned early, leaving the
now inactive block group on fs_info->zone_active_bgs, leaking its
reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as
its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps
selecting it, spinning btrfs_zoned_activate_one_bg().
Fall through to the cleanup on failure too and return the error, but keep
the block group read-only as its zones are left inconsistent. |
| Chargemap contains an open redirect vulnerability in the authentication login endpoint. A remote, unauthenticated attacker could send a crafted URL to a victim and redirect them to an attacker controlled domain. Fixed 2026-07-17. |
| BACnet Stack is a BACnet open source protocol stack C library for embedded systems. Prior to version 1.5.1, there is a remotely reachable denial-of-service vulnerability in bacnet-stack affecting the default demo server built from the unmodified apps/server/main.c. This issue has been patched in version 1.5.1. |
| A security flaw has been discovered in Linksys EA8100 1.0.3.216940. The affected element is an unknown function of the file etc/init.d/service_smbd.sh of the component SMB Service. Performing a manipulation of the argument ANON_ACCESS results in improper initialization. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: oa_tc6: Improve the error recovery
When oversubscribed traffic causes lot of buffer overflow errors,
probably due to loss of data chunks, driver fails to find a
data chunk with end_valid bit set, before it runs out of sk buffer
space. As a result, assert is seen during skb_put.
Now, check is made if skb buffer has enough tailroom for the
incoming data before accepting. If there is no room, current
frame is abandoned and it will start looking for a data chunk
with start_valid bit, that is a new frame.
SK buffer allocation error is considered as recoverable error.
rx_buf_overflow flag is too specific and no longer the only
condition this flag is used for. Therefore it is renamed as
wait_until_start_valid. This is more appropriate as this flag
is used to look for the next data chunk with SV bit set, after
failures like buffer overflow, buffer allocation failure, skb pointer
validity besides buffer overflow error.
Not writing to status0 if it reads 0. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Fix infinite loop in layout state revocation
find_one_sb_stid() skips stids whose sc_status is non-zero, but the
SC_TYPE_LAYOUT case in nfsd4_revoke_states() never sets sc_status
before calling nfsd4_close_layout(). The retry loop therefore finds
the same layout stid on every iteration, hanging the revoker
indefinitely. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: meson: amlogic-a4: fix deadlock issue
Accessing the pinconf-pins sysfs node may deadlock.
pinconf_pins_show() holds pctldev->mutex, and the platform driver
calls pinctrl_find_gpio_range_from_pin(), which tries to acquire
the same mutex again, leading to a deadlock.
Use pinctrl_find_gpio_range_from_pin_nolock() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: samsung: Remove redundant port lock acquisition in rx helpers
Sashiko identified a deadlock when the console flow is engaged [1].
When console flow control is enabled (UPF_CONS_FLOW),
s3c24xx_serial_stop_tx() calls s3c24xx_serial_rx_enable() and
s3c24xx_serial_start_tx() calls s3c24xx_serial_rx_disable().
The serial core framework invokes the .stop_tx() and .start_tx()
callbacks with the port->lock spinlock already held. Furthermore, all
internal driver paths that invoke stop_tx (such as the DMA TX
completion handler s3c24xx_serial_tx_dma_complete() or the PIO TX IRQ
handler s3c24xx_serial_tx_irq()) also acquire port->lock prior to
calling it. (Note that s3c24xx_serial_start_tx() is only invoked by the
serial core).
However, s3c24xx_serial_rx_enable() and s3c24xx_serial_rx_disable()
unconditionally attempt to acquire port->lock again using
uart_port_lock_irqsave(). Since spinlocks are not recursive, this
causes a deadlock on the same CPU when console flow control is engaged.
Remove the redundant lock acquisition from both rx helper functions. |
| Stack-based buffer overflow in Microsoft Office Outlook allows an unauthorized attacker to execute code over a network. |
| LibreOffice Base documents can bind macros to document events, such as opening or closing the document. The macro security setting decides whether macros that come with a document may run. Macros bound to the events of a Base document were run without the macro security setting being applied, so opening or converting a crafted database document could run a macro and, through it, any command. In fixed versions macros bound to the events of a Base document follow the macro security setting, as macros in other documents do. |
| NLTK from 3.6 before 3.10.4 contains an algorithmic complexity vulnerability in LegalitySyllableTokenizer.tokenize that allows remote attackers to exhaust CPU by supplying long all-vowel tokens. Attackers can submit a token such as a long run of vowels, causing the unguarded onset reversal loop to perform quadratic work and deny service to syllabification components. |
| LibreOffice Writer can open HTML documents, and an HTML document can bind macros to events of the document as a whole, such as the document being opened or closed. Macros bound to these events were not taken into account by the macro security check, so they could run when the document was opened, whatever the macro security level. In fixed versions these macros follow the macro security settings like any other macro in the document. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix SPSR_EL2 restore in kvm_hyp_handle_mops()
kvm_hyp_handle_mops() resets the single-step state machine as part of
rewinding state for a MOPS exception by modifying vcpu_cpsr() and
writing the result directly into hardware.
In the case of nested virtualization, vcpu_cpsr() is a synthetic value
such that the rest of KVM can deal with vEL2 cleanly. That means the
value requires translation before being written into hardware, which is
unfortunately missing from the MOPS handler.
Fix it by directly modifying SPSR_EL2 and avoiding the synthetic state
altogether, which will be resynchronized on the next 'full' exit back
to KVM. |