| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: macb: properly unregister fixed rate clocks
The additional resources allocated with clk_register_fixed_rate() need
to be released with clk_unregister_fixed_rate(), otherwise they are lost. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: lag: Check for LAG device before creating debugfs
__mlx5_lag_dev_add_mdev() may return 0 (success) even when an error
occurs that is handled gracefully. Consequently, the initialization
flow proceeds to call mlx5_ldev_add_debugfs() even when there is no
valid LAG context.
mlx5_ldev_add_debugfs() blindly created the debugfs directory and
attributes. This exposed interfaces (like the members file) that rely on
a valid ldev pointer, leading to potential NULL pointer dereferences if
accessed when ldev is NULL.
Add a check to verify that mlx5_lag_dev(dev) returns a valid pointer
before attempting to create the debugfs entries. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix switchdev mode rollback in case of failure
If for some internal reason switchdev mode fails, we rollback to legacy
mode, before this patch, rollback will unregister the uplink netdev and
leave it unregistered causing the below kernel bug.
To fix this, we need to avoid netdev unregister by setting the proper
rollback flag 'MLX5_PRIV_FLAGS_SWITCH_LEGACY' to indicate legacy mode.
devlink (431) used greatest stack depth: 11048 bytes left
mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), \
necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: E-Switch: Supported tc chains and prios offload
mlx5_core 0000:00:03.0: Loading uplink representor for vport 65535
mlx5_core 0000:00:03.0: mlx5_cmd_out_err:816:(pid 456): \
QUERY_HCA_CAP(0x100) op_mod(0x0) failed, \
status bad parameter(0x3), syndrome (0x3a3846), err(-22)
mlx5_core 0000:00:03.0 enp0s3np0 (unregistered): Unloading uplink \
representor for vport 65535
------------[ cut here ]------------
kernel BUG at net/core/dev.c:12070!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 456 Comm: devlink Not tainted 6.16.0-rc3+ \
#9 PREEMPT(voluntary)
RIP: 0010:unregister_netdevice_many_notify+0x123/0xae0
...
Call Trace:
[ 90.923094] unregister_netdevice_queue+0xad/0xf0
[ 90.923323] unregister_netdev+0x1c/0x40
[ 90.923522] mlx5e_vport_rep_unload+0x61/0xc6
[ 90.923736] esw_offloads_enable+0x8e6/0x920
[ 90.923947] mlx5_eswitch_enable_locked+0x349/0x430
[ 90.924182] ? is_mp_supported+0x57/0xb0
[ 90.924376] mlx5_devlink_eswitch_mode_set+0x167/0x350
[ 90.924628] devlink_nl_eswitch_set_doit+0x6f/0xf0
[ 90.924862] genl_family_rcv_msg_doit+0xe8/0x140
[ 90.925088] genl_rcv_msg+0x18b/0x290
[ 90.925269] ? __pfx_devlink_nl_pre_doit+0x10/0x10
[ 90.925506] ? __pfx_devlink_nl_eswitch_set_doit+0x10/0x10
[ 90.925766] ? __pfx_devlink_nl_post_doit+0x10/0x10
[ 90.926001] ? __pfx_genl_rcv_msg+0x10/0x10
[ 90.926206] netlink_rcv_skb+0x52/0x100
[ 90.926393] genl_rcv+0x28/0x40
[ 90.926557] netlink_unicast+0x27d/0x3d0
[ 90.926749] netlink_sendmsg+0x1f7/0x430
[ 90.926942] __sys_sendto+0x213/0x220
[ 90.927127] ? __sys_recvmsg+0x6a/0xd0
[ 90.927312] __x64_sys_sendto+0x24/0x30
[ 90.927504] do_syscall_64+0x50/0x1c0
[ 90.927687] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 90.927929] RIP: 0033:0x7f7d0363e047 |
| In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Handle DBC deactivation if the owner went away
When a DBC is released, the device sends a QAIC_TRANS_DEACTIVATE_FROM_DEV
transaction to the host over the QAIC_CONTROL MHI channel. QAIC handles
this by calling decode_deactivate() to release the resources allocated for
that DBC. Since that handling is done in the qaic_manage_ioctl() context,
if the user goes away before receiving and handling the deactivation, the
host will be out-of-sync with the DBCs available for use, and the DBC
resources will not be freed unless the device is removed. If another user
loads and requests to activate a network, then the device assigns the same
DBC to that network, QAIC will "indefinitely" wait for dbc->in_use = false,
leading the user process to hang.
As a solution to this, handle QAIC_TRANS_DEACTIVATE_FROM_DEV transactions
that are received after the user has gone away. |
| In the Linux kernel, the following vulnerability has been resolved:
counter: rz-mtu3-cnt: do not use struct rz_mtu3_channel's dev member
The counter driver can use HW channels 1 and 2, while the PWM driver can
use HW channels 0, 1, 2, 3, 4, 6, 7.
The dev member is assigned both by the counter driver and the PWM driver
for channels 1 and 2, to their own struct device instance, overwriting
the previous value.
The sub-drivers race to assign their own struct device pointer to the
same struct rz_mtu3_channel's dev member.
The dev member of struct rz_mtu3_channel is used by the counter
sub-driver for runtime PM.
Depending on the probe order of the counter and PWM sub-drivers, the
dev member may point to the wrong struct device instance, causing the
counter sub-driver to do runtime PM actions on the wrong device.
To fix this, use the parent pointer of the counter, which is assigned
during probe to the correct struct device, not the struct device pointer
inside the shared struct rz_mtu3_channel. |
| In the Linux kernel, the following vulnerability has been resolved:
counter: rz-mtu3-cnt: prevent counter from being toggled multiple times
Runtime PM counter is incremented / decremented each time the sysfs
enable file is written to.
If user writes 0 to the sysfs enable file multiple times, runtime PM
usage count underflows, generating the following message.
rz-mtu3-counter rz-mtu3-counter.0: Runtime PM usage count underflow!
At the same time, hardware registers end up being accessed with clocks
off in rz_mtu3_terminate_counter() to disable an already disabled
channel.
If user writes 1 to the sysfs enable file multiple times, runtime PM
usage count will be incremented each time, requiring the same number of
0 writes to get it back to 0.
If user writes 0 to the sysfs enable file while PWM is in progress, PWM
is stopped without counter being the owner of the underlying MTU3
channel.
Check against the cached count_is_enabled value and exit if the user
is trying to set the same enable value. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix memory leak when a wq is reset
idxd_wq_disable_cleanup() which is called from the reset path for a
workqueue, sets the wq type to NONE, which for other parts of the
driver mean that the wq is empty (all its resources were released).
Only set the wq type to NONE after its resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: me4000: Fix potential overrun of firmware buffer
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmware loading was totally broken before commit ac584af59945
("staging: comedi: me4000: fix firmware downloading"), but that is the
most sensible target for this fix. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free and NULL deref in smb_grant_oplock()
smb_grant_oplock() has two issues in the oplock publication sequence:
1) opinfo is linked into ci->m_op_list (via opinfo_add) before
add_lease_global_list() is called. If add_lease_global_list()
fails (kmalloc returns NULL), the error path frees the opinfo
via __free_opinfo() while it is still linked in ci->m_op_list.
Concurrent m_op_list readers (opinfo_get_list, or direct iteration
in smb_break_all_levII_oplock) dereference the freed node.
2) opinfo->o_fp is assigned after add_lease_global_list() publishes
the opinfo on the global lease list. A concurrent
find_same_lease_key() can walk the lease list and dereference
opinfo->o_fp->f_ci while o_fp is still NULL.
Fix by restructuring the publication sequence to eliminate post-publish
failure:
- Set opinfo->o_fp before any list publication (fixes NULL deref).
- Preallocate lease_table via alloc_lease_table() before opinfo_add()
so add_lease_global_list() becomes infallible after publication.
- Keep the original m_op_list publication order (opinfo_add before
lease list) so concurrent opens via same_client_has_lease() and
opinfo_get_list() still see the in-flight grant.
- Use opinfo_put() instead of __free_opinfo() on err_out so that
the RCU-deferred free path is used.
This also requires splitting add_lease_global_list() to take a
preallocated lease_table and changing its return type from int to void,
since it can no longer fail. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: me_daq: Fix potential overrun of firmware buffer
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free in update_super_work when racing with umount
Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: reject mount if bigalloc with s_first_data_block != 0
bigalloc with s_first_data_block != 0 is not supported, reject mounting
it. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure. `dev->iobase`
may still be set to its initial value of 0, which would result in
undesired writes to low I/O port addresses. `dev->private` may still be
`NULL`, which would result in null pointer dereferences.
Fix `atmio16d_detach()` by checking that `dev->private` is valid
(non-null) before calling `reset_atmio16d()`. This implies that
`dev->iobase` was set correctly since that is set up before
`dev->private`. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: dt2815: add hardware detection to prevent crash
The dt2815 driver crashes when attached to I/O ports without actual
hardware present. This occurs because syzkaller or users can attach
the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.
When no hardware exists at the specified port, inb() operations return
0xff (floating bus), but outb() operations can trigger page faults due
to undefined behavior, especially under race conditions:
BUG: unable to handle page fault for address: 000000007fffff90
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:dt2815_attach+0x6e0/0x1110
Add hardware detection by reading the status register before attempting
any write operations. If the read returns 0xff, assume no hardware is
present and fail the attach with -ENODEV. This prevents crashes from
outb() operations on non-existent hardware. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: validate ND option lengths
br_nd_send() walks ND options according to option-provided lengths.
A malformed option can make the parser advance beyond the computed
option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure
Presently, if the force feedback initialisation fails when probing the
Logitech G920 Driving Force Racing Wheel for Xbox One, an error number
will be returned and propagated before the userspace infrastructure
(sysfs and /dev/input) has been torn down. If userspace ignores the
errors and continues to use its references to these dangling entities, a
UAF will promptly follow.
We have 2 options; continue to return the error, but ensure that all of
the infrastructure is torn down accordingly or continue to treat this
condition as a warning by emitting the message but returning success.
It is thought that the original author's intention was to emit the
warning but keep the device functional, less the force feedback feature,
so let's go with that. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in add_adev() error path
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit(). |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: validate ND option lengths in vxlan_na_create
vxlan_na_create() walks ND options according to option-provided
lengths. A malformed option can make the parser advance beyond the
computed option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid infinite loops caused by residual data
On the mkdir/mknod path, when mapping logical blocks to physical blocks,
if inserting a new extent into the extent tree fails (in this example,
because the file system disabled the huge file feature when marking the
inode as dirty), ext4_ext_map_blocks() only calls ext4_free_blocks() to
reclaim the physical block without deleting the corresponding data in
the extent tree. This causes subsequent mkdir operations to reference
the previously reclaimed physical block number again, even though this
physical block is already being used by the xattr block. Therefore, a
situation arises where both the directory and xattr are using the same
buffer head block in memory simultaneously.
The above causes ext4_xattr_block_set() to enter an infinite loop about
"inserted" and cannot release the inode lock, ultimately leading to the
143s blocking problem mentioned in [1].
If the metadata is corrupted, then trying to remove some extent space
can do even more harm. Also in case EXT4_GET_BLOCKS_DELALLOC_RESERVE
was passed, remove space wrongly update quota information.
Jan Kara suggests distinguishing between two cases:
1) The error is ENOSPC or EDQUOT - in this case the filesystem is fully
consistent and we must maintain its consistency including all the
accounting. However these errors can happen only early before we've
inserted the extent into the extent tree. So current code works correctly
for this case.
2) Some other error - this means metadata is corrupted. We should strive to
do as few modifications as possible to limit damage. So I'd just skip
freeing of allocated blocks.
[1]
INFO: task syz.0.17:5995 blocked for more than 143 seconds.
Call Trace:
inode_lock_nested include/linux/fs.h:1073 [inline]
__start_dirop fs/namei.c:2923 [inline]
start_dirop fs/namei.c:2934 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ibmvfc: Fix OOB access in ibmvfc_discover_targets_done()
A malicious or compromised VIO server can return a num_written value in the
discover targets MAD response that exceeds max_targets. This value is
stored directly in vhost->num_targets without validation, and is then used
as the loop bound in ibmvfc_alloc_targets() to index into disc_buf[], which
is only allocated for max_targets entries. Indices at or beyond max_targets
access kernel memory outside the DMA-coherent allocation. The
out-of-bounds data is subsequently embedded in Implicit Logout and PLOGI
MADs that are sent back to the VIO server, leaking kernel memory.
Fix by clamping num_written to max_targets before storing it. |
