| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ibmasm: fix OOB reads in command_file_write due to missing size checks
The command_file_write() handler allocates a kernel buffer of exactly
count bytes and copies user data into it, but does not validate the
buffer against the dot command protocol before passing it to
get_dot_command_size() and get_dot_command_timeout().
Since both the allocation size (count) and the header fields (command_size,
data_size) are independently user-controlled, an attacker can cause
get_dot_command_size() to return a value exceeding the allocation,
triggering OOB reads in get_dot_command_timeout() and an out-of-bounds
memcpy_toio() that leaks kernel heap memory to the service processor.
Fix with two guards: reject writes smaller than sizeof(struct
dot_command_header) before allocation, then after copying user data
reject commands where the buffer is smaller than the total size declared
by the header (sizeof(header) + command_size + data_size). This ensures
all subsequent header and payload field accesses stay within the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: Validate SQE128 flag before accessing the cmd
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: Add validation for MTU changes
Increasing the MTU beyond the HDS threshold causes the hardware to
fragment packets across multiple buffers. If a single-buffer XDP program
is attached, the driver will drop all multi-frag frames. While we can't
prevent a remote sender from sending non-TCP packets larger than the MTU,
this will prevent users from inadvertently breaking new TCP streams.
Traditionally, drivers supported XDP with MTU less than 4Kb
(packet per page). Fbnic currently prevents attaching XDP when MTU is too high.
But it does not prevent increasing MTU after XDP is attached. |
| Improper validation of syntactic correctness of input in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| User interface (ui) misrepresentation of critical information in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| guzzlehttp/psr7 is a PSR-7 HTTP message library implementation in PHP. Versions prior to 2.10.2 contain improper Host header validation when parsing raw HTTP request messages and when deriving a server request URI from server variables. An attacker can provide a malformed Host header containing URI authority delimiters, such as `trusted.example@evil.example`. When the Host value is used to construct a URI, the malformed value can be reinterpreted as URI userinfo and host. This can cause the PSR-7 request URI host to differ from the original Host header value. Applications are affected if they parse attacker-controlled raw HTTP requests with `GuzzleHttp\Psr7\Message::parseRequest()` or the legacy 1.x `GuzzleHttp\Psr7\parse_request()` function, or if they build server requests from attacker-controlled server variables, then rely on the resulting URI host for routing, allow-list checks, or forwarding decisions. In affected forwarding or gateway scenarios, this may cause requests or credentials to be sent to an unintended host. The issue is patched in `2.10.2`. `1.x` is end-of-life and will not receive a patch. Some workarounds are available. Validate the `Host` header as `uri-host [ ":" port ]` before calling `Message::parseRequest()` or legacy `parse_request()` on untrusted HTTP request data, or before deriving routing and forwarding decisions from a parsed request URI. Reject Host values containing userinfo, path, query, or fragment delimiters. |
| The Aqara Cloud OAuth Authorization Endpoint (open-cn.aqara.com/oauth/authorize) is vulnerable to a redirect bypass due to lax controls on domain matching, which is an instance of "CWE-1289: Improper Validation of Unsafe Equivalence in Input" and has an estimated CVSS of CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:N (9.3 Critical). |
| ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-48 and 7.1.2-24, a missing check in the DCM decoder could result in an image with invalid dimensions and that could cause crashes in other operation. This issue has been patched in versions 6.9.13-48 and 7.1.2-24. |
| Dulwich is a pure-Python implementation of the Git file formats and protocols. Starting in version 0.1.0 and prior to version 1.2.5, a client with push access could push a tiny crafted thin pack (~174 bytes) whose delta header declares a huge dest_size. When dulwich ingested it via add_thin_pack / apply_delta, it would allocate hundreds of MB of memory based on that attacker-controlled size, with no relationship to the actual bytes received. Operators running a Dulwich-based Git server that exposes git-receive-pack (i.e. accepts pushes) - for example via dulwich.server functionality, the HTTP smart server, or anything built on ReceivePackHandler - are impacted. The issue is patched in 1.2.5. add_thin_pack now accepts a max_input_size keyword (bytes; 0/None = unlimited, matching git's semantics), and ReceivePackHandler reads receive.maxInputSize from the repository config and passes it through. Wire reads are counted and a PackInputTooLarge exception is raised once the cap is exceeded - equivalent to git index-pack --max-input-size. Users should upgrade to Dulwich 1.2.5 or later and set receive.maxInputSize in their server's repository config to a sane bound for their environment. On unpatched versions, receive.maxInputSize has no effect, so it cannot be used as a workaround. Until upgrading, operators should restrict dulwich-receive-pack (push) access to trusted, authenticated clients only, or disable it entirely on servers that only need to serve fetches and/or run the server under an OS-level memory limit (e.g. ulimit, cgroups/MemoryMax, or a container memory limit) so a malicious push is killed rather than taking down the host. |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub. Fedify previously addressed SSRF/internal network access in GHSA-p9cg-vqcc-grcx by adding public URL validation before runtime document and media fetching. However, the IPv4 validation logic present starting in version 0.11.2 and prior to versions 1.9.12, 1.10.11, 2.0.19, 2.1.15, and 2.2.4 appears incomplete. The `validatePublicUrl()` protection relies on `isValidPublicIPv4Address()` to reject non-public IPv4 destinations. The function blocks common private and local ranges such as `10.0.0.0/8`, `127.0.0.0/8`, `169.254.0.0/16`, `172.16.0.0/12`, and `192.168.0.0/16`, but it still treats several special-use, reserved, multicast, benchmarking, and carrier-grade NAT IPv4 ranges as valid public destinations. Because this validation is used as an SSRF defense before outbound fetches, this appears to be an incomplete mitigation or bypass class for the previous SSRF issue. Versions 1.9.12, 1.10.11, 2.0.19, 2.1.15, and 2.2.4 contain an updated patch. |
| Fedify is a TypeScript library for building federated server apps powered by ActivityPub. Prior to versions 1.9.11, 1.10.10, 2.0.18, 2.1.14, and 2.2.3, an attacker can make use of JSON-LD features to restructure a JSON-LD document that would change how Fedify interprets it without changing its Linked Data Signature, allowing them to alter a third-party signed activity they have received. Versions 1.9.11, 1.10.10, 2.0.18, 2.1.14, and 2.2.3 fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: b43legacy: enforce bounds check on firmware key index in RX path
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices. |
| The $_internalApplyOplogUpdate aggregation pipeline stage can be used to execute a document diff containing a malformed binary diff to return memory out-of-bounds or crash the server. $_internalApplyOplogUpdate can be executed by any authenticated user with access to the aggregate command. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/sdma4: replace BUG_ON with WARN_ON in fence emission
sdma_v4_0_ring_emit_fence() contains two BUG_ON(addr & 0x3) assertions
that verify fence writeback addresses are dword-aligned. These
assertions can be reached from unprivileged userspace via crafted
DRM_IOCTL_AMDGPU_CS submissions, causing a fatal kernel panic in a
scheduler worker thread.
Replace both BUG_ON() calls with WARN_ON() to log the condition without
crashing the kernel. A misaligned fence address at this point indicates
a driver bug, but crashing the kernel is never the correct response when
the assertion is reachable from userspace.
The CS IOCTL path is the correct place to filter invalid submissions;
the ring emission callback is too late to do anything about it.
(cherry picked from commit b90250bd933afd1ba94d86d6b13821997b22b18e) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: validate SVM ioctl nattr against buffer size
Validate nattr field against the buffer size, preventing
out-of-bounds buffer access via user-controlled attribute count.
(cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f) |
| When OIDC authentication is enabled in configuration, clients may set specific values in the "mechanism" parameter of the "authenticate" command that lead to server crash. The authenticate command is accessible to unauthenticated clients, leading to pre-auth denial-of-service in affected product configurations. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds stream encoder index v3
eng_id can be negative and that stream_enc_regs[]
can be indexed out of bounds.
eng_id is used directly as an index into stream_enc_regs[], which has
only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can
access memory past the end of the array.
Add a bounds check using ARRAY_SIZE() before using eng_id as an index.
The unsigned cast also rejects negative values.
This avoids out-of-bounds access.
Fixes the below smatch error:
dcn*_resource.c: stream_encoder_create() may index
stream_enc_regs[eng_id] out of bounds (size 5).
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c
1246 static struct stream_encoder *dcn35_stream_encoder_create(
1247 enum engine_id eng_id,
1248 struct dc_context *ctx)
1249 {
...
1255
1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */
1257 if (eng_id <= ENGINE_ID_DIGF) {
ENGINE_ID_DIGF is 5. should <= be <?
Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative?
end_id is type signed long, but there are checks in the caller which prevent it from being negative.
1258 vpg_inst = eng_id;
1259 afmt_inst = eng_id;
1260 } else
1261 return NULL;
1262
...
1281
1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios,
1283 eng_id, vpg, afmt,
--> 1284 &stream_enc_regs[eng_id],
^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array.
...
1287 return &enc1->base;
1288 }
v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast
v3: The compiler already knows how to compare the two values, so the
cast (int) is not needed. (Roman) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: disallow non-power of two min_region_sz on damon_start()
Commit d8f867fa0825 ("mm/damon: add damon_ctx->min_sz_region") introduced
a bug that allows unaligned DAMON region address ranges. Commit
c80f46ac228b ("mm/damon/core: disallow non-power of two min_region_sz")
fixed it, but only for damon_commit_ctx() use case. Still, DAMON sysfs
interface can emit non-power of two min_region_sz via damon_start(). Fix
the path by adding the is_power_of_2() check on damon_start().
The issue was discovered by sashiko [1]. |
| Ubuntu Linux 6.8, 6.17 and 7.0 contain SAUCE patches which fail to validate invalid sizes of the name field in AppAmor notification responses. The bug can be triggered by an unprivileged local user and could result in handling of crafted responses. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix zero-size GDS range init on RDNA4
RDNA4 (GFX 12) hardware removes the GDS, GWS, and OA on-chip memory
resources. The gfx_v12_0 initialisation code correctly leaves
adev->gds.gds_size, adev->gds.gws_size, and adev->gds.oa_size at
zero to reflect this.
amdgpu_ttm_init() unconditionally calls amdgpu_ttm_init_on_chip() for
each of these resources regardless of size. When the size is zero,
amdgpu_ttm_init_on_chip() forwards the call to ttm_range_man_init(),
which calls drm_mm_init(mm, 0, 0). drm_mm_init() immediately fires
DRM_MM_BUG_ON(start + size <= start) -- trivially true when size is
zero -- crashing the kernel during modprobe of amdgpu on an RX 9070 XT.
Guard against this by returning 0 early from
amdgpu_ttm_init_on_chip() when size_in_page is zero. This skips TTM
resource manager registration for hardware resources that are absent,
without affecting any other GPU type.
DRM_MM_BUG_ON() only asserts if CONFIG_DRM_DEBUG_MM is enabled in
the kernel config. This is apparently rarely enabled as these chips
have been in the market for over a year and this issue was only reported
now.
Oops-Analysis: http://oops.fenrus.org/reports/bugzilla.korg/221376/report.html
(cherry picked from commit 5719ce5865279cad4fd5f01011fe037168503f2d) |
