| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the SageMaker Workflow component of aws/sagemaker-python-sdk allows for the possibility of MD5 hash collisions in all versions. This can lead to workflows being inadvertently replaced due to the reuse of results from different configurations that produce the same MD5 hash. This issue can cause integrity problems within the pipeline, potentially leading to erroneous processing outcomes. |
| VyOS 1.3 through 1.5 (fixed in 1.4.2) or any Debian-based system using dropbear in combination with live-build has the same Dropbear private host keys across different installations. Thus, an attacker can conduct active man-in-the-middle attacks against SSH connections if Dropbear is enabled as the SSH daemon. I n VyOS, this is not the default configuration for the system SSH daemon, but is for the console service. To mitigate this, one can run "rm -f /etc/dropbear/*key*" and/or "rm -f /etc/dropbear-initramfs/*key*" and then dropbearkey -t rsa -s 4096 -f /etc/dropbear_rsa_host_key and reload the service or reboot the system before using Dropbear as the SSH daemon (this clears out all keys mistakenly built into the release image) or update to the latest version of VyOS 1.4 or 1.5. Note that this vulnerability is not unique to VyOS and may appear in any Debian-based Linux distribution that uses Dropbear in combination with live-build, which has a safeguard against this behavior in OpenSSH but no equivalent one for Dropbear. |
| Dpanel is a Docker visualization panel system which provides complete Docker management functions. The Dpanel service contains a hardcoded JWT secret in its default configuration, allowing attackers to generate valid JWT tokens and compromise the host machine. This security flaw allows attackers to analyze the source code, discover the embedded secret, and craft legitimate JWT tokens. By forging these tokens, an attacker can successfully bypass authentication mechanisms, impersonate privileged users, and gain unauthorized administrative access. Consequently, this enables full control over the host machine, potentially leading to severe consequences such as sensitive data exposure, unauthorized command execution, privilege escalation, or further lateral movement within the network environment. This issue is patched in version 1.6.1. A workaround for this vulnerability involves replacing the hardcoded secret with a securely generated value and load it from secure configuration storage. |
| The use of a hard-coded cryptographic key was discovered in firmware version 3.60 of the Click Plus PLC. The vulnerability relies on the fact that the software contains a hard-coded AES key used to protect the initial messages of a new KOPS session. |
| jose v6.0.10 was discovered to contain weak encryption. NOTE: this is disputed by a third party because the claim of "do not meet recommended security standards" does not reflect guidance in a final publication. |
| ESPTouch is a connection protocol for internet of things devices. In the ESPTouchV2 protocol, while there is an option to use a custom AES key, there is no option to set the IV (Initialization Vector) prior to versions 5.3.2, 5.2.4, 5.1.6, and 5.0.8. The IV is set to zero and remains constant throughout the product's lifetime. In AES/CBC mode, if the IV is not properly initialized, the encrypted output becomes deterministic, leading to potential data leakage. To address the aforementioned issues, the application generates a random IV when activating the AES key starting in versions 5.3.2, 5.2.4, 5.1.6, and 5.0.8. This IV is then transmitted along with the provision data to the provision device. The provision device has also been equipped with a parser for the AES IV. The upgrade is applicable for all applications and users of ESPTouch v2 component from ESP-IDF. As it is implemented in the ESP Wi-Fi stack, there is no workaround for the user to fix the application layer without upgrading the underlying firmware. |
| Successful exploitation of this vulnerability could allow an attacker (who needs to have Admin access privileges) to read hardcoded AES passphrase, which may be used for decryption of certain data within backup files of 2N Access Commander version 1.14 and older.
2N has released an updated version 3.3 of 2N Access Commander, where this vulnerability is mitigated. It is recommended that all customers update 2N Access Commander to the latest version. |
| The devices are vulnerable to an authentication bypass due to flaws in the authorization mechanism. An unauthenticated remote attacker could exploit this weakness by performing brute-force attacks to guess valid credentials or by using MD5 collision techniques to forge authentication hashes, potentially compromising the device. |
| Use of Hard-coded Cryptographic Key vulnerability in ABB RMC-100, ABB RMC-100 LITE.
When the REST interface is enabled by the user, and an attacker gains access to
source code and control network, the attacker can bypass the REST interface authentication and gain access to MQTT configuration data.
This issue affects RMC-100: from 2105457-043 through 2105457-045; RMC-100 LITE: from 2106229-015 through 2106229-016. |
| Missing cryptographic key commitment in the AWS SDK for C++ may allow a user with write access to the S3 bucket to introduce a new EDK that decrypts to different plaintext when the encrypted data key is stored in an "instruction file" instead of S3's metadata record.
To mitigate this issue, upgrade AWS SDK for C++ to version 1.11.712 or later |
| An issue was discovered in Siklu Communications Etherhaul 8010TX and 1200FX devices, Firmware 7.4.0 through 10.7.3 and possibly other previous versions. The rfpiped service listening on TCP port 555 which uses static AES encryption keys hardcoded in the binary. These keys are identical across all devices, allowing attackers to craft encrypted packets that execute arbitrary commands without authentication. This is a failed patch for CVE-2017-7318. This issue may affect other Etherhaul series devices with shared firmware. |
| A static initialization vector (IV) in the encrypt function of netbird management's service from v0.23.2 to v0.29.1 allows attackers to obtain sensitive information (email addresses) when in possession of the audit events database. |
| There is a configuration defect vulnerability in ZTELink 5.4.9 for iOS. This vulnerability is caused by a flaw in the WiFi parameter configuration of the ZTELink. An attacker can obtain unauthorized access to the WiFi service. |
| A vulnerability classified as problematic was found in FNKvision FNK-GU2 up to 40.1.7. Affected by this vulnerability is an unknown functionality of the file /etc/shadow of the component MD5. The manipulation leads to risky cryptographic algorithm. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. |
| A vulnerability, which was classified as problematic, has been found in fossasia open-event-server 1.19.1. This issue affects the function send_email_change_user_email of the file /fossasia/open-event-server/blob/development/app/api/helpers/mail.py of the component Mail Verification Handler. The manipulation leads to reliance on obfuscation or encryption of security-relevant inputs without integrity checking. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Arcade MCP allows you to to create, deploy, and share MCP Servers. Prior to 1.5.4, the arcade-mcp HTTP server uses a hardcoded default worker secret ("dev") that is never validated or overridden during normal server startup. As a result, any unauthenticated attacker who knows this default key can forge valid JWTs and fully bypass the FastAPI authentication layer. This grants remote access to all worker endpoints—including tool enumeration and tool invocation—without credentials. This vulnerability is fixed in 1.5.4. |
| Besu Native contains scripts and tooling that is used to build and package the native libraries used by the Ethereum client Hyperledger Besu. Besu 24.7.1 through 25.2.2, corresponding to besu-native versions 0.9.0 through 1.2.1, have a potential consensus bug for the precompiles ALTBN128_ADD (0x06), ALTBN128_MUL (0x07), and ALTBN128_PAIRING (0x08). These precompiles were reimplemented in besu-native using gnark-crypto's bn254 implementation, as the former implementation used a library which was no longer maintained and not sufficiently performant. The new gnark implementation was initially added in version 0.9.0 of besu-native but was not utilized by Besu until version 0.9.2 in Besu 24.7.1. The issue is that there are EC points which may be crafted which are in the correct subgroup but are not on the curve and the besu-native gnark implementation was relying on subgroup checks to perform point-on-curve checks as well. The version of gnark-crypto used at the time did not do this check when performing subgroup checks. The result is that it was possible for Besu to give an incorrect result and fall out of consensus when executing one of these precompiles against a specially crafted input point. Additionally, homogenous Besu-only networks can potentially enshrine invalid state which would be incorrect and difficult to process with patched versions of besu which handle these calls correctly. The underlying defect has been patched in besu-native release 1.3.0. The fixed version of Besu is version 25.3.0. As a workaround for versions of Besu with the problem, the native precompile for altbn128 may be disabled in favor of the pure-java implementation. The pure java implementation is significantly slower, but does not have this consensus issue. |
| Emissary is a P2P based data-driven workflow engine. The ChecksumCalculator class within allows for hashing and checksum generation, but it includes or defaults to algorithms that are no longer recommended for secure cryptographic use cases (e.g., SHA-1, CRC32, and SSDEEP). These algorithms, while possibly valid for certain non-security-critical tasks, can expose users to security risks if used in scenarios where strong cryptographic guarantees are required. This issue is fixed in 8.24.0. |
| sigstore-python is a Python tool for generating and verifying Sigstore signatures. Versions of sigstore-python newer than 2.0.0 but prior to 3.6.0 perform insufficient validation of the "integration time" present in "v2" and "v3" bundles during the verification flow: the "integration time" is verified *if* a source of signed time (such as an inclusion promise) is present, but is otherwise trusted if no source of signed time is present. This does not affect "v1" bundles, as the "v1" bundle format always requires an inclusion promise.
Sigstore uses signed time to support verification of signatures made against short-lived signing keys. The impact and severity of this weakness is *low*, as Sigstore contains multiple other enforcing components that prevent an attacker who modifies the integration timestamp within a bundle from impersonating a valid signature. In particular, an attacker who modifies the integration timestamp can induce a Denial of Service, but in no different manner than already possible with bundle access (e.g. modifying the signature itself such that it fails to verify). Separately, an attacker could upload a *new* entry to the transparency service, and substitute their new entry's time. However, this would still be rejected at validation time, as the new entry's (valid) signed time would be outside the validity window of the original signing certificate and would nonetheless render the attacker auditable. |
| An Improper Authorization vulnerability was identified in the EOL OVA based connect component which is deployed for installation purposes in the customer internal network. Under certain conditions, this could allow a bad actor to gain unauthorized access to the local db containing weakly hashed credentials of the installer. This EOL component was deprecated in September 2023 with end of support extended till January 2024. |
