| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Frontegg SAML SSO WordPress plugin through 1.0.1 does not verify the signature or issuer of SAML authentication responses before establishing a session, allowing unauthenticated attackers to log in as any user, including administrators, as well as to create arbitrary accounts. |
| The CODE MONKEYS PROPOSALS WordPress plugin through 1.0.1 does not validate a user-supplied file path before deleting a file, and does not check the capability of the user making the request, allowing any authenticated user, such as a subscriber, to delete arbitrary files on the server, which can lead to a site takeover. |
| The Booking for Appointments and Events Calendar WordPress plugin before 2.4.10 does not verify that the user editing a customer or employee record is entitled to modify the WordPress account linked to it, allowing users holding Amelia's customer or employee management permissions to set the password and email address of other users' WordPress accounts and take them over. |
| The Temporary Login Without Password WordPress plugin before 1.9.9 does not verify that the user requesting a temporary login holds network super admin rights before granting the new account those rights, allowing an administrator of a single site on a multisite network to take over the whole network. The same missing check also allows an existing account, including the attacker's own, to be promoted. |
| matrix-sdk-crypto is a no-network-IO implementation of a state machine that handles end-to-end encryption for Matrix clients. Starting in version 0.12.0 and prior to version 0.17.0, the matrix-sdk-crypto crate was missing a check for the user ID when decrypting an Olm-encrypted event containing the `sender_device_keys` property. This could be exploited to forge an encrypted to-device event, but only if the attacker colludes with the homeserver operator. This issue is fixed in matrix-sdk-crypto 0.17.0. There are no known workarounds for the issue. |
| Hoverfly is an open source API simulation tool. Prior to version 1.12.8, when Hoverfly is running in Diff mode, the `AddDiff()` function writes to the shared `responsesDiff` map without any synchronization (no mutex). When multiple proxy requests are processed concurrently (the normal case for any proxy), the concurrent map writes trigger Go's built-in race detector which causes a `fatal error: concurrent map read and map write`, immediately killing the entire Hoverfly process. This is trivially exploitable by sending multiple simultaneous requests. Version 1.12.8 patches the issue. |
| Hoverfly is an open source API simulation tool. Prior to version 1.12.8, remote post-serve actions use `http.DefaultClient` without any timeout configuration. When the remote endpoint is unreachable or intentionally slow (accepts TCP connection but never responds), each triggered proxy request spawns a goroutine that blocks indefinitely on `http.DefaultClient.Do()`. An attacker can cause unbounded goroutine accumulation leading to memory exhaustion and process crash (OOM kill). Unlike local post-serve action execution, this requires no binary execution, only a URL pointing to a non-responsive endpoint. Version 1.12.8 patches the issue. |
| The Yogeta WP Cloud WordPress plugin through 1.0 does not validate a user-supplied file path before passing it to a file-read function on a public endpoint that lacks any authorization check, allowing unauthenticated attackers to download arbitrary files from the server, including files containing sensitive credentials. |
| The Export & Import WPBakery Page Builder WordPress plugin through 1.0.2 does not perform any CSRF check on its template-import feature and does not sanitise the imported data before storing it and echoing it back, allowing attackers to make a logged-in administrator import a crafted template via a forged request that results in Stored Cross-Site Scripting executed in the administrator's session. |
| The BE REST Endpoints WordPress plugin through 1.0.0 does not perform any authorization check before allowing widgets to be read, created, updated and deleted, and does not sanitize the values it stores in them, allowing unauthenticated users to inject arbitrary web scripts which will execute in the browser of any user visiting the site. |
| The Add User Autocomplete WordPress plugin before 1.2 does not perform any capability or nonce check before creating a pending site-membership invitation carrying a caller-supplied role, allowing any authenticated user, such as a subscriber, to grant themselves the administrator role on a multisite installation. |
| zstd-jni versions 1.2.0 through 1.5.7-13 contain an out-of-bounds read vulnerability in the ZstdDictDecompress constructor because offset and length arguments are never validated against the dictionary array bounds. Attackers can supply arbitrary offset or length values to read memory past the end of the supplied array, potentially causing JVM termination. |
| snappy-java through 1.1.10.8 contains an out-of-bounds write vulnerability in Snappy.uncompress(ByteBuffer, ByteBuffer) because destination buffer capacity is never validated against decompressed size. Attackers can supply valid compressed data that decompresses larger than the destination buffer, causing writes past buffer boundaries and JVM termination. |
| sngrep through 1.8.4 contains stack buffer overflow vulnerabilities in SIP attribute formatting routines when header values exceed the 255-byte buffer limit. Attackers can craft malicious SIP packets with oversized Call-ID, X-Call-ID, or other header fields to overflow stack buffers and cause crashes or execute arbitrary code during packet parsing and rendering. |
| Freeciv versions 3.1.0 through 3.2.5 contain an out-of-bounds read vulnerability in sg_load_player_unit() when processing savegame files with invalid unit activity indices. An attacker can craft a malicious savegame file with an out-of-range activity index that bypasses bounds checking and causes a crash or limited heap memory exposure when loaded. |
| Freeciv versions before 3.2.6 contain a heap buffer overflow in worklist_load() when processing savegame files with declared worklist lengths exceeding the fixed array bound of 64 elements. Attackers can craft malicious savegame files that write past the entries array into adjacent heap-allocated struct fields, potentially corrupting memory when a user or server operator loads the file. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: imx: serialize imx_uart_ports[] lifetime
imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.
A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.
Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addition and removal together with their table updates so sibling
operations cannot interleave. Reject an occupied slot rather than
clobbering an active port during a duplicate-line probe. |
| The Temporary Login Without Password WordPress plugin before 1.9.9 does not prevent a temporary user from creating an Application Password, and does not revoke one when the temporary access expires or is disabled, allowing the recipient of a temporary login to retain working access to the site over REST and XML-RPC after the administrator believes it has been withdrawn. The retained access carries whatever role was granted, which for the Temporary Login Without Password WordPress plugin before 1.9.9's main use case is Administrator. |
| The DS Ad Rotator WordPress plugin through 0.8 does not perform any capability check, nonce verification, or file-type validation on its image upload handler, allowing unauthenticated attackers to upload arbitrary files, including PHP, to a web-accessible directory, which can lead to remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: reject out-of-range nseconds in NFSv3 SETATTR and create ops
A client can send an NFSv3 SETATTR, CREATE, MKDIR, SYMLINK or MKNOD
carrying an atime or mtime whose nseconds field is out of range. The
value is well-formed on the wire and decodes cleanly into a valid
uint32, but it is not a valid timespec64: tv_nsec must be less than
NSEC_PER_SEC.
Nothing in the setattr path clamps it. notify_change() runs the time
through timestamp_truncate(), which does not reduce tv_nsec below
NSEC_PER_SEC when the filesystem supports nanosecond granularity
(s_time_gran == 1), and the inode atime/mtime setters store it verbatim
(only ctime is normalized, via inode_set_ctime_to_ts()). The
un-normalized value then corrupts on-disk metadata: ext4's
ext4_encode_extra_time() shifts tv_nsec left by EXT4_EPOCH_BITS, which
overflows the 32-bit extra field and clobbers the seconds-epoch bits, so
the stored seconds (and thus the year) are wrong on read-back. XFS with
bigtime mis-stores the timestamp for the same reason.
Validate the client-supplied atime/mtime in the proc handlers and return
NFS3ERR_INVAL before anything is changed. RFC 1813 lists NFS3ERR_INVAL
for SETATTR and describes it as the error for a value the server 'can
not store ... in its own representation'; the client maps it to EINVAL.
Checking in the proc handlers, rather than in nfsd_setattr(), keeps the
rejection in front of object creation. The create operations create the
object before nfsd_create_setattr() runs, so a late failure would leave
the new object behind and turn a non-idempotent request into a namespace
change that reports failure. The check is therefore done up front, for
the create operations before the object is created.
tv_nsec is a long, so the comparison casts it to unsigned long (the same
width) rather than to u32, matching timespec64_valid(). A u32 cast would
truncate on 64-bit; the unsigned long cast also rejects a value that
became negative when an out-of-range u32 wire nseconds was assigned to a
32-bit long.
Only client-supplied times are checked: SET_TO_SERVER_TIME requests
carry no client value. The sattrguard3 ctime is deliberately left alone:
an out-of-range guard simply never matches the object's ctime and yields
NFS3ERR_NOT_SYNC via the existing guardtime comparison, which is the
protocol-correct outcome rather than rejecting the request. |
