| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: fix leak if split 6 GHz scanning fails
rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's
supposed to be released at ___cfg80211_scan_done() but this doesn't happen
as rdev->scan_req is NULL at that point, too, leading to the early return
from the freeing function.
unreferenced object 0xffff8881161d0800 (size 512):
comm "wpa_supplicant", pid 379, jiffies 4294749765
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................
backtrace (crc c867fdb6):
kmemleak_alloc+0x89/0x90
__kmalloc_noprof+0x2fd/0x410
cfg80211_scan+0x133/0x730
nl80211_trigger_scan+0xc69/0x1cc0
genl_family_rcv_msg_doit+0x204/0x2f0
genl_rcv_msg+0x431/0x6b0
netlink_rcv_skb+0x143/0x3f0
genl_rcv+0x27/0x40
netlink_unicast+0x4f6/0x820
netlink_sendmsg+0x797/0xce0
__sock_sendmsg+0xc4/0x160
____sys_sendmsg+0x5e4/0x890
___sys_sendmsg+0xf8/0x180
__sys_sendmsg+0x136/0x1e0
__x64_sys_sendmsg+0x76/0xc0
x64_sys_call+0x13f0/0x17d0
Found by Linux Verification Center (linuxtesting.org). |
| A flaw was found in GnuTLS. This vulnerability allows a denial of service (DoS) by excessive CPU (Central Processing Unit) and memory consumption via specially crafted malicious certificates containing a large number of name constraints and subject alternative names (SANs). |
| Missing Release of Memory after Effective Lifetime vulnerability in leandrocp mdex and mdex_native allows an attacker who controls a rendered document to cause a denial of service through unbounded native memory exhaustion.
The native rendering code permanently leaks memory when rendering a document that contains escaped-tag nodes. The conversion of each %MDEx.EscapedTag{} node into its native representation (From<ExEscapedTag> for NodeValue in the Rust NIF) calls Box::leak on the caller-supplied literal string, which surrenders the backing allocation so that it lives for the entire lifetime of the operating system process and is never freed.
Both the byte length of each literal and the number of escaped-tag nodes in a document are attacker-controlled, and there is no size cap, rate limit, or string interning on this path. Every render of a document containing escaped-tag nodes therefore leaks literal_size x node_count bytes that can never be reclaimed, and repeated renders accumulate without bound. Rendering reaches this path through the public MDEx.to_html/1 entry point and any other API that renders a supplied %MDEx.Document{}.
Any application that uses mdex (or mdex_native directly) to render documents derived from user-supplied content is affected. Because the leaked memory is never reclaimed for the life of the BEAM process, an attacker can drive resident memory upward without limit until the node exhausts memory and crashes, taking down every process on it.
The vulnerable native code originally shipped inside mdex (in native/comrak_nif/src/types/document.rs) and was later extracted into the separate mdex_native package (native/mdex_native_nif/src/types/document.rs), where it remains unpatched.
This issue affects mdex from 0.11.0 before 0.12.3, and mdex_native from 0.1.0 before 0.2.3. |
| An issue in the DSO::mmap_and_copy function of relibc commit 61f42d allows attackers to cause a Denial of Service (DoS) via loading a crafted shared library. |
| js-yaml is a JavaScript YAML parser and dumper. Prior to 4.2.0 and 3.15.0, a crafted YAML document can trigger algorithmic CPU exhaustion in js-yaml merge-key processing (<<) by repeating the same alias many times in a merge sequence. This causes quadratic parse-time behavior relative to input size and can block a Node.js worker/event loop for seconds with a relatively small payload (tens of KB), resulting in denial of service. The issue is in merge handling inside lib/loader.js. This vulnerability is fixed in 4.2.0 and 3.15.0. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: max77705: Free allocated workqueue and fix removal order
Use devm interface for allocating workqueue to fix two bugs at the same
time:
1. Driver leaks the memory on remove(), because the workqueue is not
destroyed.
2. Driver allocates workqueue and then registers interrupt handlers
with devm interface. This means that probe error paths will not use a
reversed order, but first destroy the workqueue and then, via devm
release handlers, free the interrupt.
The interrupt handler schedules work on this exact workqueue, thus if
interrupt is hit in this short time window - after destroying
workqueue, but before devm() frees the interrupt - the schedulled
work will lead to use of freed memory.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update power supply (power_supply_changed()) status, thus there
is no point to run it for memory reclaim. Note that dev_name() is not
directly used in second argument to prevent possible unlikely parsing
any "%" character in device name as format. |
| A weakness has been identified in GPAC up to 26.02.0. This affects an unknown part of the file src/utils/base_encoding.c of the component ISOBMFF Parser. Executing a manipulation can lead to highly compressed data. The attack needs to be launched locally. The exploit has been made available to the public and could be used for attacks. This patch is called 297f2d8d1f493d8b241330533cd47f7da758aeb3. A patch should be applied to remediate this issue. The vendor confirms: "We added a check on inflate output size, if it surpasses 32 times the input size we stop in error. This value could be adjusted later." |
| A vulnerability was detected in 78 xiaozhi-esp32 up to 2.2.6. This vulnerability affects the function Application::GetInstance of the file main/protocols/mqtt_protocol.cc of the component MQTT Goodbye Handler. Performing a manipulation of the argument session_id results in denial of service. The attack is possible to be carried out remotely. The complexity of an attack is rather high. It is stated that the exploitability is difficult. The exploit is now public and may be used. The patch is named e182471f8c5a22434346bd98da34d3b66c8c8b3e. It is recommended to apply a patch to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix potential unbounded skb queue
virtio_transport_inc_rx_pkt() checks vvs->rx_bytes + len > vvs->buf_alloc.
virtio_transport_recv_enqueue() skips coalescing for packets
with VIRTIO_VSOCK_SEQ_EOM.
If fed with packets with len == 0 and VIRTIO_VSOCK_SEQ_EOM,
a very large number of packets can be queued
because vvs->rx_bytes stays at 0.
Fix this by estimating the skb metadata size:
(Number of skbs in the queue) * SKB_TRUESIZE(0) |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: xsk: Fix DMA and xdp_frame leak on XDP_TX xmit failure
In the XSK branch of mlx5e_xmit_xdp_buff(), when sq->xmit_xdp_frame()
returns false (e.g. XDPSQ is full), the function returns without
unmapping the DMA address or freeing the xdp_frame allocated by
xdp_convert_zc_to_xdp_frame(). The xdpi_fifo push only happens on
success, so the completion path cannot recover these entries.
With CONFIG_DMA_API_DEBUG=y, the leak surfaces on driver unbind:
DMA-API: pci 0000:08:00.0: device driver has pending DMA
allocations while released from device [count=1116]
One of leaked entries details: [device address=0x000000010ffd7028]
[size=1534 bytes] [mapped with DMA_TO_DEVICE] [mapped as phy]
WARNING: kernel/dma/debug.c:881 at dma_debug_device_change+0x127/0x180
...
DMA-API: Mapped at:
debug_dma_map_phys+0x4b/0xd0
dma_map_phys+0xfd/0x2d0
mlx5e_xdp_handle+0x5ae/0xac0 [mlx5_core]
mlx5e_xsk_skb_from_cqe_mpwrq_linear+0xc4/0x170 [mlx5_core]
mlx5e_handle_rx_cqe_mpwrq+0xc1/0x290 [mlx5_core]
Add the missing unmap + xdp_return_frame, matching the cleanup already
done in mlx5e_xdp_xmit(). has_frags is rejected earlier in this branch,
so no per-frag unmap is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: fix leaking free_bds
While reclaiming the tx queue we fast forward the write pointer to
drop any data in flight. These dropped frames are not added back
to the pool of free bds. We also need to tell the netdev that we
are dropping said data. |
| In the Linux kernel, the following vulnerability has been resolved:
neigh: let neigh_xmit take skb ownership
neigh_xmit always releases the skb, except when no neighbour table is
found. But even the first added user of neigh_xmit (mpls) relied on
neigh_xmit to release the skb (or queue it for tx).
sashiko reported:
If neigh_xmit() is called with an uninitialized neighbor table (for
example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT
and bypasses its internal out_kfree_skb error path. Because the return
value of neigh_xmit() is ignored here, does this leak the SKB?
Assume full ownership and remove the last code path that doesn't
xmit or free skb. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: fix strparser anchor skb leak on offload RX setup failure
When tls_set_device_offload_rx() fails at tls_dev_add(), the error path
calls tls_sw_free_resources_rx() to clean up the SW context that was
initialized by tls_set_sw_offload(). This function calls
tls_sw_release_resources_rx() (which stops the strparser via
tls_strp_stop()) and tls_sw_free_ctx_rx() (which kfrees the context),
but never frees the anchor skb that was allocated by alloc_skb(0) in
tls_strp_init().
Note that tls_sw_free_resources_rx() is exclusively used for this
"failed to start offload" code path, there's no other caller.
The leak did not exist before commit 84c61fe1a75b ("tls: rx: do not use
the standard strparser"), because the standard strparser doesn't try
to pre-allocate an skb.
The normal close path in tls_sk_proto_close() handles cleanup by calling
tls_sw_strparser_done() (which calls tls_strp_done()) after dropping
the socket lock, because tls_strp_done() does cancel_work_sync() and
the strparser work handler takes the socket lock. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: renesas: Fix memory leak in renesas_i3c_i3c_xfers()
The xfer structure allocated by renesas_i3c_alloc_xfer() was never freed
in the renesas_i3c_i3c_xfers() function. Use the __free(kfree) cleanup
attribute to automatically free the memory when the variable goes out of
scope. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: Fix memory leak destroying device
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix memory leaks in beacon template setup
The functions ath11k_mac_setup_bcn_tmpl_ema() and
ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates
but fail to free it when parameter setup returns an error.
Since beacon templates must be released during normal execution, they
must also be released in the error handling paths to prevent memory
leaks.
Fix this by using unified exit paths with proper cleanup in the respective
error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| AutoGPT is a workflow automation platform for creating, deploying, and managing continuous artificial intelligence agents. Prior to 0.6.32, there is a DoS vulnerability in AITextSummarizerBlock. Malicious users can amplify their input. For example, if a malicious user inputs 10K of content, the server will consume 50G of memory, eventually causing memory resources to be exhausted, resulting in DoS. This vulnerability is fixed in 0.6.32. |
| In the Linux kernel, the following vulnerability has been resolved:
amd-pstate: Fix memory leak in amd_pstate_epp_cpu_init()
On failure to set the epp, the function amd_pstate_epp_cpu_init()
returns with an error code without freeing the cpudata object that was
allocated at the beginning of the function.
Ensure that the cpudata object is freed before returning from the
function.
This memory leak was discovered by Claude Opus 4.6 with the aid of
Chris Mason's AI review-prompts
(https://github.com/masoncl/review-prompts/tree/main/kernel). |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. Prior to 2.94.0, the HTML backend has unsafe URI and path handling. This vulnerability is fixed in 2.94.0. |
| Docling simplifies document processing by parsing diverse formats and providing integrations with the generative AI ecosystem. From 2.45.0 until 2.91.0, the METS-GBS backend's XML parsing and the input document format detection lacked security controls. An attacker could craft malicious METS-GBS archives that, when processed, could read sensitive files, exhaust system resources, or cause application crashes. This vulnerability is fixed in 2.91.0. |
