| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| HCL BigFix Service Management is affected by Cross-Site Scripting (XSS) vulnerability, which could allow an attacker to inject unsanitized malicious scripts that execute in a victim's browser, enabling session hijacking, account takeover, and unauthorized actions on behalf of affected users. |
| HCL BigFix Service Management is affected by a high-severity Broken Access Control vulnerability, which could allow a low-privileged user to gain unauthorized access to administrative screens and functions reserved for higher-privileged roles. |
| HCL BigFix Service Management is affected by SQL Injection flaw and a Cross-Tenant Data Exposure flaw vulnerabilities. which could allow an authenticated attacker to inject database commands to extract sensitive system details, as well as manipulate request values to gain unauthorized access to full personal profile data and PII across different organizations. |
| HCL BigFix Service Management is affected by a Server-Side Request Forgery (SSRF) vulnerability in its search functionality, which could allow an attacker to force the application server to send requests to internal systems that are not accessible from the internet. |
| Authorization bypass through User-Controlled key vulnerability in TECHIN2B TECHIN2B Application allows Privilege Abuse.
This issue affects TECHIN2B Application: from V1.0.7676.13 through 18092026.
NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
The atlas driver requests its hardware data-ready IRQ with
devm_request_threaded_irq(); its threaded handler queues an irq_work,
atlas_work_handler(), that calls iio_trigger_poll(data->trig).
The IRQ is devm-managed, so free_irq() runs from the devres unwind after
atlas_remove() returns without flushing that irq_work. Once a buffer is
enabled, conversion-complete IRQs keep firing and queueing it; a pending
irq_work can therefore run after the unwind has freed atlas_data/indio_dev
and the trigger, when atlas_work_handler() derives the atlas_data pointer
via container_of() and dereferences data->trig, a use-after-free.
Call iio_trigger_poll_nested() directly from the threaded handler instead
of bouncing through irq_work. free_irq() then drains the threaded handler,
closing the window; other iio drivers with a threaded data-ready IRQ do the
same (e.g. bmi270).
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: buffer: Fix potential use-after-free in anonymous buffer release
An anonymous buffer handle holds a reference to the underlying IIO device.
The reference is dropped in the buffer handle's release function. If the
device has been removed, either through unbind or hot-unplug, the buffer
handle might hold the last reference.
The release function takes the mutex for the buffer using a guard, which
means the unlock happens after all the code in the function, including
`iio_device_put()`. If the anonymous buffer holds the last reference this
might free both the IIO device and the buffer, which contains the mutex,
leading to use-after-free when the mutex is unlocked.
Fix this by using a scoped guard just around the buffer dmabuf list access,
making sure the mutex is unlocked before releasing the IIO device.
Version 10 of the patch that introduced this issue used this exact scheme
of first unlocking and then dropping the reference [1]. During review it
was suggested to use a guard instead, and version 11 made that change [2]. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: meson: align gxbb_32k_clk_sel number of parents with actual count
The following out-of-bounds read has been observed by Christian on a
GXBB WeTek Hub:
==================================================================
BUG: KASAN: global-out-of-bounds in __clk_register+0x1b70/0x2418
Read of size 8 at addr ffffd66320cf88e0 by task swapper/0/1
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc5 #1 PREEMPT
Hardware name: WeTek Hub (DT)
Call trace:
show_stack+0x14/0x20 (C)
dump_stack_lvl+0x74/0x94
print_report+0x164/0x4b0
kasan_report+0x98/0xd8
__asan_report_load8_noabort+0x1c/0x24
__clk_register+0x1b70/0x2418
devm_clk_hw_register+0x74/0x15c
meson_clkc_init+0xd4/0x20c
meson_clkc_syscon_probe+0x5c/0x94
platform_probe+0xbc/0x17c
really_probe+0x184/0x844
__driver_probe_device+0x154/0x35c
driver_probe_device+0x60/0x188
__driver_attach+0x168/0x4a0
bus_for_each_dev+0xec/0x180
driver_attach+0x38/0x58
bus_add_driver+0x238/0x4c0
driver_register+0x150/0x388
__platform_driver_register+0x54/0x7c
gxbb_clkc_driver_init+0x18/0x20
do_one_initcall+0xb8/0x340
kernel_init_freeable+0x49c/0x52c
kernel_init+0x24/0x148
ret_from_fork+0x10/0x20
The buggy address belongs to the variable:
gxbb_32k_clk_parents+0x60/0x400
The buggy address belongs to a vmalloc virtual mapping
The buggy address belongs to the physical page:
Memory state around the buggy address:
ffffd66320cf8780: 00 00 00 00 f9 f9 f9 f9 00 f9 f9 f9 f9 f9 f9 f9
ffffd66320cf8800: 00 04 f9 f9 f9 f9 f9 f9 00 04 f9 f9 f9 f9 f9 f9
>ffffd66320cf8880: 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 f9 f9
^
ffffd66320cf8900: 00 01 f9 f9 f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9
ffffd66320cf8980: 00 00 02 f9 f9 f9 f9 f9 00 00 02 f9 f9 f9 f9 f9
==================================================================
Commit 7915d7d5407c ("clk: amlogic: gxbb: drop non existing 32k clock
parent") dropped a non-existing clock parent from the gxbb_32k_clk_sel
mux but didn't adjust the hard-coded num_parents field. Fix the actual
number of parents of that mux by using ARRAY_SIZE instead (avoiding
similar problems in future). |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: fix freeing of claims on meshif deletion
When the mesh interface is getting deleted, then
batadv_bla_del_backbone_claims() (via batadv_bla_purge_backbone_gw()) could
make sure that all claims gets removed. But this function is only executed
when bat_priv->bla.claim_hash is not NULL. And since batadv_bla_free() is
always setting it to NULL before it is (indirectly) called, it was never
actually executed.
But the batadv_bla_purge_claims() -> batadv_handle_unclaim() is at the
moment too fragile because the BLA code is not handling the rehashing in
batadv_bla_update_orig_address(). The stored backbone address doesn't have
to be the one actually used for the hash bucket selection during the
initial adding of the backbone. The batadv_handle_unclaim() can therefore
fail to find the respective backbone for the unclaim and then stop the
deletion.
But the actual backbone_gw object is not needed for the unclaim because all
relevant information is always provided by the caller. And the check for
the existence of the backbone_gw doesn't provide any additional security
check for the deletion of a claim. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: dat: avoid unaligned fault in IP extraction
Independent of the alignment of the ARP packet in the SKB, either the
batadv_arp_ip_src or the batadv_arp_ip_dst will have an unaligned access
(on HW without native unaligned read support).
Use get_unaligned() to handle this properly on all architectures. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix stale receive device on merged fragments
Fragment reassembly reuses the skb from the highest-numbered buffered
fragment as the merged packet. When that fragment was received on a hard
interface which is deleted before the chain completes, the merged skb can
re-enter the receive path with a stale skb->dev and skb_iif.
batadv_batman_skb_recv() passes such merged packets through the normal
receive handlers again. DAT and bridge loop avoidance both derive the ARP
header length from skb->dev, so they can dereference the freed net_device
before the packet reaches the local mesh interface.
Refresh the receive device metadata from the current receive device before
running the packet handlers. This keeps internally reinjected merged
fragments consistent with the normal receive path after hard interface
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Take trace_array reference before accessing its ftrace_ops
The trace instance files set_ftrace_filter and set_ftrace_notrace was
updated to work with specific trace instances (trace_arrays). The issue is
that when these files are opened, there is a small race window where it
will use the ftrace_ops from the inode->private pointer to get a reference
to the trace_array and then take its reference. The problem is that the
ftrace_ops itself could be freed. If the rmdir on the instance happens at
the same time the set_ftrace_filter file is opened, the rmdir could have
also freed the ftrace_ops and referencing it will cause a use-after-free
bug and crash the kernel.
Instead, pass in the trace_array as the file private data (NULL for the
top level instance), and then pass both the trace_array and the ftrace_ops
to the ftrace_regex_open() function. If the trace_array is NULL, then it
just uses the ftrace_ops without the need to take its reference (like
normal). If the ftrace_ops is NULL, that is only the case for the top
level instance and the global_ops can be used.
This allows the trace_array to have its reference incremented before
touching the ftrace_ops that could also be freed when the instance is. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent rcuwait use-after-free during requeue PI
On PREEMPT_RT, FUTEX_CMP_REQUEUE_PI can trigger a KASAN report
(slab-out-of-bounds) in futex_requeue_pi_complete() invocation of
rcuwait_wake_up().
The futex_q used by futex_wait_requeue_pi() is allocated on the waiter's
stack. An early wakeup can race with a PI requeue as follows:
waiter requeue task
------ ------------
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue
futex_proxy_trylock_atomic()
futex_requeue_pi_prepare()
Q_REQUEUE_PI_NONE -> Q_REQUEUE_PI_IN_PROGRESS
* timeout/ signal wakes waiter *
futex_requeue_pi_wakeup_sync()
Q_REQUEUE_PI_IN_PROGRESS -> Q_REQUEUE_PI_WAIT
requeue_pi_wake_futex
futex_requeue_pi_complete()
cmpxchg Q_REQUEUE_PI_WAIT -> Q_REQUEUE_PI_LOCKED
rcuwait_wait_event()
if (atomic_read(&q->requeue_state) != Q_REQUEUE_PI_WAIT)
break /* no schedule() */
/* q.pi_state->owner == current */
futex_private_hash_put()
/* return from syscall */
rcuwait_wake_up(&q->requeue_wait)
/* q is gone */
futex_requeue_pi_complete() publishes Q_REQUEUE_PI_LOCKED before
calling rcuwait_wake_up(). The waiter observes this state in
rcuwait_wait_event() before invoking schedule() in rcuwait_wait_event().
Here, the waiter is free leave the syscall before requeue task can
complete the wake.
To address this race skip rcuwait_wake_up() in the Q_REQUEUE_PI_LOCKED
case.
This state is only published by requeue_pi_wake_futex(), which saves
q->task before futex_requeue_pi_complete() and wakes the waiter via
wake_up_state().
This wake is intended to wake the waiter from its futex_do_wait() sleep.
If the waiter is still sleeping there, it can not get into the
Q_REQUEUE_PI_WAIT state (and require this removed wake).
Should the waiter be woken up from futex_do_wait() by other means (as in
this example) and sleep in futex_requeue_pi_wakeup_sync() then the
wake_up_state() from requeue_pi_wake_futex() will wake it, too.
Should the waiter task terminate before wake_up_state() had a chance to
wake the task then the task pointer does not become invalid because the
futex_hash_bucket::lock is held and the task pointer is RCU protected.
[bigeasy: Updated comment and commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bsg: Fix TOCTOU in io_uring passthrough command setup
scsi_bsg_uring_cmd() reads bsg_uring_cmd from the shared mmap'd SQE.
Userspace can change a field after we check it and before we use it.
request_len is the sharp case: it can grow past sizeof(scmd->cmnd) after
the bound check and overflow scmd->cmnd in copy_from_user().
READ_ONCE() the SQE fields we check or use into locals before use. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Reserve a terminator byte for the login payload
iscsi_target_check_login_request() rejects a login PDU whose
DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and
login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS
bytes. Since iscsit_get_login_rx() receives payload_length + padding
bytes, where
padding = ((-payload_length) & 3);
any payload_length from 8189 to 8192 fills the whole 8192 byte
buffer. The write stays in bounds, but no byte is left for a NUL
terminator.
The buffer is subsequently consumed as a C string. In the CHAP path
chap_check_algorithm() calls kstrdup(a_str), and extract_param() calls
strstr(in_buf, pattern) followed by strlen_semi(), none of which take a
length. convert_null_to_semi() additionally rewrites every embedded NUL
to ';', so even a payload made of well formed NUL separated key=value
records is left without a terminator. These walk past the end of the
object into adjacent slab memory. It is reachable by an unauthenticated
initiator against a portal configured for CHAP; when authentication is
not required iscsi_login_zero_tsih_s2() rewrites AuthMethod to None and
the CHAP path is never entered.
Allocate one extra byte. kzalloc() zeroes it and nothing ever writes to
it, as every writer copies to offset 0 for at most MAX_KEY_VALUE_PAIRS
bytes, so the buffer is always terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: Fix DMA mapping ownership on partial map failure
If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps
TX but leaves tx_sg_mapped set. If TX mapping fails on a later
transfer, mappings created for earlier transfers remain active.
In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they
are assigned only after every transfer has been mapped. The subsequent
spi_unmap_msg() may therefore unmap the TX mapping again or release
earlier mappings using a NULL or stale device. Using a NULL device can
trigger an oops. An empty SG table does not prevent the NULL dereference
because dma_unmap_sg_attrs() accesses the device before checking the
entry count.
Publish both mapping devices before mapping starts and unwind all
failures through __spi_unmap_msg(). This clears the mapping flags and
releases each mapping once with the device that created it.
Publishing the devices before the loop also refreshes them when no
transfer needs mapping. No mapping flag is set in that case, so current
users do not use the pointers as mapping owners. |
| A flaw was found in the foreman_ansible plugin's Ansible inventory API. The controller builds its host query using an unscoped Host.where call that does not enforce the search filter associated with the caller's view_hosts permission. An authenticated user whose host visibility is restricted by a permission filter can supply arbitrary host IDs within their organization and receive the full Ansible inventory for those hosts, including parameter values marked as hidden. |
| SigNoz versions 0.88.0 through 0.141.0 fail to apply authorization wrappers to trace-funnel analytics endpoints in the HTTP handler. Unauthenticated attackers can submit arbitrary funnel definitions to retrieve trace analytics including identifiers, durations, span counts, service topology, and error activity without credentials. |
| The Location Manager plugin for WordPress is vulnerable to generic SQL Injection via 'latitude' and 'longitude' REST API Parameters in all versions up to, and including, 2.3.38 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The injection is triggered when the orderby=lat_lon parameter is supplied, and affects multiple publicly accessible REST endpoints including geodir/v2/locations/cities, /regions, /countries, and /neighbourhoods via both the get_locations() and get_neighbourhoods() functions. |
| The Qi Addons For Elementor plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 's' parameter in all versions up to, and including, 1.11 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the Table of Contents widget to be placed on a template that renders on the WordPress search-results page (e.g., a sitewide header or footer template) with the 'Limit ToC to Main Page Content' option left at its default value of No, so the widget scans the search-results heading that reflects the unsanitized `s` parameter. |
