| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Silence a warning in btf_type_id_size()
syzbot reported a warning in [1] with the following stacktrace:
WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
Call Trace:
<TASK>
map_check_btf kernel/bpf/syscall.c:1024 [inline]
map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198
__sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040
__do_sys_bpf kernel/bpf/syscall.c:5162 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5160 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With the following btf
[1] DECL_TAG 'a' type_id=4 component_idx=-1
[2] PTR '(anon)' type_id=0
[3] TYPE_TAG 'a' type_id=2
[4] VAR 'a' type_id=3, linkage=static
and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG),
the following WARN_ON_ONCE in btf_type_id_size() is triggered:
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
Note that 'return NULL' is the correct behavior as we don't want
a DECL_TAG type to be used as a btf_{key,value}_type_id even
for the case like 'DECL_TAG -> STRUCT'. So there
is no correctness issue here, we just want to silence warning.
To silence the warning, I added DECL_TAG as one of kinds in
btf_type_nosize() which will cause btf_type_id_size() returning
NULL earlier without the warning.
[1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add check for kmemdup
Since the kmemdup may return NULL pointer,
it should be better to add check for the return value
in order to avoid NULL pointer dereference. |
| There exists an arbitrary memory read within the Linux Kernel BPF - Constants provided to fill pointers in structs passed in to bpf_sys_bpf are not verified and can point anywhere, including memory not owned by BPF. An attacker with CAP_BPF can arbitrarily read memory from anywhere on the system. We recommend upgrading past commit 86f44fcec22c |
| In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: fix of_iomap memory leak
Smatch reports:
drivers/clk/mediatek/clk-mtk.c:583 mtk_clk_simple_probe() warn:
'base' from of_iomap() not released on lines: 496.
This problem was also found in linux-next. In mtk_clk_simple_probe(),
base is not released when handling errors
if clk_data is not existed, which may cause a leak.
So free_base should be added here to release base. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint
If vhost_scsi_set_endpoint is called multiple times without a
vhost_scsi_clear_endpoint between them, we can hit multiple bugs
found by Haoran Zhang:
1. Use-after-free when no tpgs are found:
This fixes a use after free that occurs when vhost_scsi_set_endpoint is
called more than once and calls after the first call do not find any
tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds
tpgs to add to the vs_tpg array match=true, so we will do:
vhost_vq_set_backend(vq, vs_tpg);
...
kfree(vs->vs_tpg);
vs->vs_tpg = vs_tpg;
If vhost_scsi_set_endpoint is called again and no tpgs are found
match=false so we skip the vhost_vq_set_backend call leaving the
pointer to the vs_tpg we then free via:
kfree(vs->vs_tpg);
vs->vs_tpg = vs_tpg;
If a scsi request is then sent we do:
vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend
which sees the vs_tpg we just did a kfree on.
2. Tpg dir removal hang:
This patch fixes an issue where we cannot remove a LIO/target layer
tpg (and structs above it like the target) dir due to the refcount
dropping to -1.
The problem is that if vhost_scsi_set_endpoint detects a tpg is already
in the vs->vs_tpg array or if the tpg has been removed so
target_depend_item fails, the undepend goto handler will do
target_undepend_item on all tpgs in the vs_tpg array dropping their
refcount to 0. At this time vs_tpg contains both the tpgs we have added
in the current vhost_scsi_set_endpoint call as well as tpgs we added in
previous calls which are also in vs->vs_tpg.
Later, when vhost_scsi_clear_endpoint runs it will do
target_undepend_item on all the tpgs in the vs->vs_tpg which will drop
their refcount to -1. Userspace will then not be able to remove the tpg
and will hang when it tries to do rmdir on the tpg dir.
3. Tpg leak:
This fixes a bug where we can leak tpgs and cause them to be
un-removable because the target name is overwritten when
vhost_scsi_set_endpoint is called multiple times but with different
target names.
The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup
a vhost-scsi device to target/tpg mapping, then calls
VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we
haven't seen before (target1 has tpg1 but target2 has tpg2). When this
happens we don't teardown the old target tpg mapping and just overwrite
the target name and the vs->vs_tpg array. Later when we do
vhost_scsi_clear_endpoint, we are passed in either target1 or target2's
name and we will only match that target's tpgs when we loop over the
vs->vs_tpg. We will then return from the function without doing
target_undepend_item on the tpgs.
Because of all these bugs, it looks like being able to call
vhost_scsi_set_endpoint multiple times was never supported. The major
user, QEMU, already has checks to prevent this use case. So to fix the
issues, this patch prevents vhost_scsi_set_endpoint from being called
if it's already successfully added tpgs. To add, remove or change the
tpg config or target name, you must do a vhost_scsi_clear_endpoint
first. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel wiphy_work before freeing wiphy
A wiphy_work can be queued from the moment the wiphy is allocated and
initialized (i.e. wiphy_new_nm). When a wiphy_work is queued, the
rdev::wiphy_work is getting queued.
If wiphy_free is called before the rdev::wiphy_work had a chance to run,
the wiphy memory will be freed, and then when it eventally gets to run
it'll use invalid memory.
Fix this by canceling the work before freeing the wiphy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Check encryption key size on incoming connection
This is required for passing GAP/SEC/SEM/BI-04-C PTS test case:
Security Mode 4 Level 4, Responder - Invalid Encryption Key Size
- 128 bit
This tests the security key with size from 1 to 15 bytes while the
Security Mode 4 Level 4 requests 16 bytes key size.
Currently PTS fails with the following logs:
- expected:Connection Response:
Code: [3 (0x03)] Code
Identifier: (lt)WildCard: Exists(gt)
Length: [8 (0x0008)]
Destination CID: (lt)WildCard: Exists(gt)
Source CID: [64 (0x0040)]
Result: [3 (0x0003)] Connection refused - Security block
Status: (lt)WildCard: Exists(gt),
but received:Connection Response:
Code: [3 (0x03)] Code
Identifier: [1 (0x01)]
Length: [8 (0x0008)]
Destination CID: [64 (0x0040)]
Source CID: [64 (0x0040)]
Result: [0 (0x0000)] Connection Successful
Status: [0 (0x0000)] No further information available
And HCI logs:
< HCI Command: Read Encrypti.. (0x05|0x0008) plen 2
Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)
> HCI Event: Command Complete (0x0e) plen 7
Read Encryption Key Size (0x05|0x0008) ncmd 1
Status: Success (0x00)
Handle: 14 Address: 00:1B:DC:F2:24:10 (Vencer Co., Ltd.)
Key size: 7
> ACL Data RX: Handle 14 flags 0x02 dlen 12
L2CAP: Connection Request (0x02) ident 1 len 4
PSM: 4097 (0x1001)
Source CID: 64
< ACL Data TX: Handle 14 flags 0x00 dlen 16
L2CAP: Connection Response (0x03) ident 1 len 8
Destination CID: 64
Source CID: 64
Result: Connection successful (0x0000)
Status: No further information available (0x0000) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in kerberos authentication
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix type confusion via race condition when using ipc_msg_send_request
req->handle is allocated using ksmbd_acquire_id(&ipc_ida), based on
ida_alloc. req->handle from ksmbd_ipc_login_request and
FSCTL_PIPE_TRANSCEIVE ioctl can be same and it could lead to type confusion
between messages, resulting in access to unexpected parts of memory after
an incorrect delivery. ksmbd check type of ipc response but missing add
continue to check next ipc reponse. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress
Bug report and analysis from Ding Hui.
During iSCSI session logout, if another task accesses the shost ipaddress
attr, we can get a KASAN UAF report like this:
[ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0
[ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088
[ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3
[ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
[ 276.944470] Call Trace:
[ 276.944943] <TASK>
[ 276.945397] dump_stack_lvl+0x34/0x48
[ 276.945887] print_address_description.constprop.0+0x86/0x1e7
[ 276.946421] print_report+0x36/0x4f
[ 276.947358] kasan_report+0xad/0x130
[ 276.948234] kasan_check_range+0x35/0x1c0
[ 276.948674] _raw_spin_lock_bh+0x78/0xe0
[ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp]
[ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi]
[ 276.952185] dev_attr_show+0x3f/0x80
[ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0
[ 276.953401] seq_read_iter+0x402/0x1020
[ 276.954260] vfs_read+0x532/0x7b0
[ 276.955113] ksys_read+0xed/0x1c0
[ 276.955952] do_syscall_64+0x38/0x90
[ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 276.956769] RIP: 0033:0x7f5d3a679222
[ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24
[ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222
[ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003
[ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000
[ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000
[ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58
[ 276.960536] </TASK>
[ 276.961357] Allocated by task 2209:
[ 276.961756] kasan_save_stack+0x1e/0x40
[ 276.962170] kasan_set_track+0x21/0x30
[ 276.962557] __kasan_kmalloc+0x7e/0x90
[ 276.962923] __kmalloc+0x5b/0x140
[ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi]
[ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi]
[ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp]
[ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi]
[ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi]
[ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi]
[ 276.965546] netlink_unicast+0x4d5/0x7b0
[ 276.965905] netlink_sendmsg+0x78d/0xc30
[ 276.966236] sock_sendmsg+0xe5/0x120
[ 276.966576] ____sys_sendmsg+0x5fe/0x860
[ 276.966923] ___sys_sendmsg+0xe0/0x170
[ 276.967300] __sys_sendmsg+0xc8/0x170
[ 276.967666] do_syscall_64+0x38/0x90
[ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 276.968773] Freed by task 2209:
[ 276.969111] kasan_save_stack+0x1e/0x40
[ 276.969449] kasan_set_track+0x21/0x30
[ 276.969789] kasan_save_free_info+0x2a/0x50
[ 276.970146] __kasan_slab_free+0x106/0x190
[ 276.970470] __kmem_cache_free+0x133/0x270
[ 276.970816] device_release+0x98/0x210
[ 276.971145] kobject_cleanup+0x101/0x360
[ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi]
[ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp]
[ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi]
[ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi]
[ 276.972808] netlink_unicast+0x4d5/0x7b0
[ 276.973201] netlink_sendmsg+0x78d/0xc30
[ 276.973544] sock_sendmsg+0xe5/0x120
[ 276.973864] ____sys_sendmsg+0x5fe/0x860
[ 276.974248] ___sys_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL dereference on root when tracing inode eviction
When evicting an inode the first thing we do is to setup tracing for it,
which implies fetching the root's id. But in btrfs_evict_inode() the
root might be NULL, as implied in the next check that we do in
btrfs_evict_inode().
Hence, we either should set the ->root_objectid to 0 in case the root is
NULL, or we move tracing setup after checking that the root is not
NULL. Setting the rootid to 0 at least gives us the possibility to trace
this call even in the case when the root is NULL, so that's the solution
taken here. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: sh: rz-dmac: fix device leak on probe failure
Make sure to drop the reference taken when looking up the ICU device
during probe also on probe failures (e.g. probe deferral). |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: check validation of fault attrs in f2fs_build_fault_attr()
- It missed to check validation of fault attrs in parse_options(),
let's fix to add check condition in f2fs_build_fault_attr().
- Use f2fs_build_fault_attr() in __sbi_store() to clean up code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Sanitise num_phys
Information is stored in mr_sas_port->phy_mask, values larger then size of
this field shouldn't be allowed. |
| Stack buffer overflow in WebRTC in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit stack corruption via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Sanitize syscall table indexing under speculation
The syscall number is a user-controlled value used to index into the
syscall table. Use array_index_nospec() to clamp this value after the
bounds check to prevent speculative out-of-bounds access and subsequent
data leakage via cache side channels. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: properly keep track of conduit reference
Problem description
-------------------
DSA has a mumbo-jumbo of reference handling of the conduit net device
and its kobject which, sadly, is just wrong and doesn't make sense.
There are two distinct problems.
1. The OF path, which uses of_find_net_device_by_node(), never releases
the elevated refcount on the conduit's kobject. Nominally, the OF and
non-OF paths should result in objects having identical reference
counts taken, and it is already suspicious that
dsa_dev_to_net_device() has a put_device() call which is missing in
dsa_port_parse_of(), but we can actually even verify that an issue
exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command
"before" and "after" applying this patch:
(unbind the conduit driver for net device eno2)
echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
we see these lines in the output diff which appear only with the patch
applied:
kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000)
kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000)
2. After we find the conduit interface one way (OF) or another (non-OF),
it can get unregistered at any time, and DSA remains with a long-lived,
but in this case stale, cpu_dp->conduit pointer. Holding the net
device's underlying kobject isn't actually of much help, it just
prevents it from being freed (but we never need that kobject
directly). What helps us to prevent the net device from being
unregistered is the parallel netdev reference mechanism (dev_hold()
and dev_put()).
Actually we actually use that netdev tracker mechanism implicitly on
user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with
the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link().
But time still passes at DSA switch probe time between the initial
of_find_net_device_by_node() code and the user port creation time, time
during which the conduit could unregister itself and DSA wouldn't know
about it.
So we have to run of_find_net_device_by_node() under rtnl_lock() to
prevent that from happening, and release the lock only with the netdev
tracker having acquired the reference.
Do we need to keep the reference until dsa_unregister_switch() /
dsa_switch_shutdown()?
1: Maybe yes. A switch device will still be registered even if all user
ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not
make user port errors fatal"), and the cpu_dp->conduit pointers
remain valid. I haven't audited all call paths to see whether they
will actually use the conduit in lack of any user port, but if they
do, it seems safer to not rely on user ports for that reference.
2. Definitely yes. We support changing the conduit which a user port is
associated to, and we can get into a situation where we've moved all
user ports away from a conduit, thus no longer hold any reference to
it via the net device tracker. But we shouldn't let it go nonetheless
- see the next change in relation to dsa_tree_find_first_conduit()
and LAG conduits which disappear.
We have to be prepared to return to the physical conduit, so the CPU
port must explicitly keep another reference to it. This is also to
say: the user ports and their CPU ports may not always keep a
reference to the same conduit net device, and both are needed.
As for the conduit's kobject for the /sys/class/net/ entry, we don't
care about it, we can release it as soon as we hold the net device
object itself.
History and blame attribution
-----------------------------
The code has been refactored so many times, it is very difficult to
follow and properly attribute a blame, but I'll try to make a short
history which I hope to be correct.
We have two distinct probing paths:
- one for OF, introduced in 2016 i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Add basic validation for RAS header
If RAS header read from EEPROM is corrupted, it could result in trying
to allocate huge memory for reading the records. Add some validation to
header fields. |
| In the Linux kernel, the following vulnerability has been resolved:
cdrom: rearrange last_media_change check to avoid unintentional overflow
When running syzkaller with the newly reintroduced signed integer wrap
sanitizer we encounter this splat:
[ 366.015950] UBSAN: signed-integer-overflow in ../drivers/cdrom/cdrom.c:2361:33
[ 366.021089] -9223372036854775808 - 346321 cannot be represented in type '__s64' (aka 'long long')
[ 366.025894] program syz-executor.4 is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 366.027502] CPU: 5 PID: 28472 Comm: syz-executor.7 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 366.027512] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 366.027518] Call Trace:
[ 366.027523] <TASK>
[ 366.027533] dump_stack_lvl+0x93/0xd0
[ 366.027899] handle_overflow+0x171/0x1b0
[ 366.038787] ata1.00: invalid multi_count 32 ignored
[ 366.043924] cdrom_ioctl+0x2c3f/0x2d10
[ 366.063932] ? __pm_runtime_resume+0xe6/0x130
[ 366.071923] sr_block_ioctl+0x15d/0x1d0
[ 366.074624] ? __pfx_sr_block_ioctl+0x10/0x10
[ 366.077642] blkdev_ioctl+0x419/0x500
[ 366.080231] ? __pfx_blkdev_ioctl+0x10/0x10
...
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang. It was re-enabled in the
kernel with Commit 557f8c582a9ba8ab ("ubsan: Reintroduce signed overflow
sanitizer").
Let's rearrange the check to not perform any arithmetic, thus not
tripping the sanitizer. |
