| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: uprobes: Add missing fence.i after building the XOL buffer
The XOL (execute out-of-line) buffer is used to single-step the
replaced instruction(s) for uprobes. The RISC-V port was missing a
proper fence.i (i$ flushing) after constructing the XOL buffer, which
can result in incorrect execution of stale/broken instructions.
This was found running the BPF selftests "test_progs:
uprobe_autoattach, attach_probe" on the Spacemit K1/X60, where the
uprobes tests randomly blew up. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: free routing table on probe failure
If complete = true in dsa_tree_setup(), it means that we are the last
switch of the tree which is successfully probing, and we should be
setting up all switches from our probe path.
After "complete" becomes true, dsa_tree_setup_cpu_ports() or any
subsequent function may fail. If that happens, the entire tree setup is
in limbo: the first N-1 switches have successfully finished probing
(doing nothing but having allocated persistent memory in the tree's
dst->ports, and maybe dst->rtable), and switch N failed to probe, ending
the tree setup process before anything is tangible from the user's PoV.
If switch N fails to probe, its memory (ports) will be freed and removed
from dst->ports. However, the dst->rtable elements pointing to its ports,
as created by dsa_link_touch(), will remain there, and will lead to
use-after-free if dereferenced.
If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely
possible because that is where ds->ops->setup() is, we get a kasan
report like this:
==================================================================
BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568
Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42
Call trace:
__asan_report_load8_noabort+0x20/0x30
mv88e6xxx_setup_upstream_port+0x240/0x568
mv88e6xxx_setup+0xebc/0x1eb0
dsa_register_switch+0x1af4/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
Allocated by task 42:
__kasan_kmalloc+0x84/0xa0
__kmalloc_cache_noprof+0x298/0x490
dsa_switch_touch_ports+0x174/0x3d8
dsa_register_switch+0x800/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
Freed by task 42:
__kasan_slab_free+0x48/0x68
kfree+0x138/0x418
dsa_register_switch+0x2694/0x2ae0
mv88e6xxx_register_switch+0x1b8/0x2a8
mv88e6xxx_probe+0xc4c/0xf60
mdio_probe+0x78/0xb8
really_probe+0x2b8/0x5a8
__driver_probe_device+0x164/0x298
driver_probe_device+0x78/0x258
__device_attach_driver+0x274/0x350
The simplest way to fix the bug is to delete the routing table in its
entirety. dsa_tree_setup_routing_table() has no problem in regenerating
it even if we deleted links between ports other than those of switch N,
because dsa_link_touch() first checks whether the port pair already
exists in dst->rtable, allocating if not.
The deletion of the routing table in its entirety already exists in
dsa_tree_teardown(), so refactor that into a function that can also be
called from the tree setup error path.
In my analysis of the commit to blame, it is the one which added
dsa_link elements to dst->rtable. Prior to that, each switch had its own
ds->rtable which is freed when the switch fails to probe. But the tree
is potentially persistent memory. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Replace Mutex with Spinlock for RLCG register access to avoid Priority Inversion in SRIOV
RLCG Register Access is a way for virtual functions to safely access GPU
registers in a virtualized environment., including TLB flushes and
register reads. When multiple threads or VFs try to access the same
registers simultaneously, it can lead to race conditions. By using the
RLCG interface, the driver can serialize access to the registers. This
means that only one thread can access the registers at a time,
preventing conflicts and ensuring that operations are performed
correctly. Additionally, when a low-priority task holds a mutex that a
high-priority task needs, ie., If a thread holding a spinlock tries to
acquire a mutex, it can lead to priority inversion. register access in
amdgpu_virt_rlcg_reg_rw especially in a fast code path is critical.
The call stack shows that the function amdgpu_virt_rlcg_reg_rw is being
called, which attempts to acquire the mutex. This function is invoked
from amdgpu_sriov_wreg, which in turn is called from
gmc_v11_0_flush_gpu_tlb.
The [ BUG: Invalid wait context ] indicates that a thread is trying to
acquire a mutex while it is in a context that does not allow it to sleep
(like holding a spinlock).
Fixes the below:
[ 253.013423] =============================
[ 253.013434] [ BUG: Invalid wait context ]
[ 253.013446] 6.12.0-amdstaging-drm-next-lol-050225 #14 Tainted: G U OE
[ 253.013464] -----------------------------
[ 253.013475] kworker/0:1/10 is trying to lock:
[ 253.013487] ffff9f30542e3cf8 (&adev->virt.rlcg_reg_lock){+.+.}-{3:3}, at: amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.013815] other info that might help us debug this:
[ 253.013827] context-{4:4}
[ 253.013835] 3 locks held by kworker/0:1/10:
[ 253.013847] #0: ffff9f3040050f58 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x3f5/0x680
[ 253.013877] #1: ffffb789c008be40 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: process_one_work+0x1d6/0x680
[ 253.013905] #2: ffff9f3054281838 (&adev->gmc.invalidate_lock){+.+.}-{2:2}, at: gmc_v11_0_flush_gpu_tlb+0x198/0x4f0 [amdgpu]
[ 253.014154] stack backtrace:
[ 253.014164] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Tainted: G U OE 6.12.0-amdstaging-drm-next-lol-050225 #14
[ 253.014189] Tainted: [U]=USER, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 253.014203] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/18/2024
[ 253.014224] Workqueue: events work_for_cpu_fn
[ 253.014241] Call Trace:
[ 253.014250] <TASK>
[ 253.014260] dump_stack_lvl+0x9b/0xf0
[ 253.014275] dump_stack+0x10/0x20
[ 253.014287] __lock_acquire+0xa47/0x2810
[ 253.014303] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014321] lock_acquire+0xd1/0x300
[ 253.014333] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014562] ? __lock_acquire+0xa6b/0x2810
[ 253.014578] __mutex_lock+0x85/0xe20
[ 253.014591] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.014782] ? sched_clock_noinstr+0x9/0x10
[ 253.014795] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.014808] ? local_clock_noinstr+0xe/0xc0
[ 253.014822] ? amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015012] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.015029] mutex_lock_nested+0x1b/0x30
[ 253.015044] ? mutex_lock_nested+0x1b/0x30
[ 253.015057] amdgpu_virt_rlcg_reg_rw+0xf6/0x330 [amdgpu]
[ 253.015249] amdgpu_sriov_wreg+0xc5/0xd0 [amdgpu]
[ 253.015435] gmc_v11_0_flush_gpu_tlb+0x44b/0x4f0 [amdgpu]
[ 253.015667] gfx_v11_0_hw_init+0x499/0x29c0 [amdgpu]
[ 253.015901] ? __pfx_smu_v13_0_update_pcie_parameters+0x10/0x10 [amdgpu]
[ 253.016159] ? srso_alias_return_thunk+0x5/0xfbef5
[ 253.016173] ? smu_hw_init+0x18d/0x300 [amdgpu]
[ 253.016403] amdgpu_device_init+0x29ad/0x36a0 [amdgpu]
[ 253.016614] amdgpu_driver_load_kms+0x1a/0xc0 [amdgpu]
[ 253.0170
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use aead_request_free to match aead_request_alloc
Use aead_request_free() instead of kfree() to properly free memory
allocated by aead_request_alloc(). This ensures sensitive crypto data
is zeroed before being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: init wiphy_work before allocating rfkill fails
syzbort reported a uninitialize wiphy_work_lock in cfg80211_dev_free. [1]
After rfkill allocation fails, the wiphy release process will be performed,
which will cause cfg80211_dev_free to access the uninitialized wiphy_work
related data.
Move the initialization of wiphy_work to before rfkill initialization to
avoid this issue.
[1]
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
CPU: 0 UID: 0 PID: 5935 Comm: syz-executor550 Not tainted 6.14.0-rc6-syzkaller-00103-g4003c9e78778 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
assign_lock_key kernel/locking/lockdep.c:983 [inline]
register_lock_class+0xc39/0x1240 kernel/locking/lockdep.c:1297
__lock_acquire+0x135/0x3c40 kernel/locking/lockdep.c:5103
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3a/0x60 kernel/locking/spinlock.c:162
cfg80211_dev_free+0x30/0x3d0 net/wireless/core.c:1196
device_release+0xa1/0x240 drivers/base/core.c:2568
kobject_cleanup lib/kobject.c:689 [inline]
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x1e4/0x5a0 lib/kobject.c:737
put_device+0x1f/0x30 drivers/base/core.c:3774
wiphy_free net/wireless/core.c:1224 [inline]
wiphy_new_nm+0x1c1f/0x2160 net/wireless/core.c:562
ieee80211_alloc_hw_nm+0x1b7a/0x2260 net/mac80211/main.c:835
mac80211_hwsim_new_radio+0x1d6/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5185
hwsim_new_radio_nl+0xb42/0x12b0 drivers/net/wireless/virtual/mac80211_hwsim.c:6242
genl_family_rcv_msg_doit+0x202/0x2f0 net/netlink/genetlink.c:1115
genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
genl_rcv_msg+0x565/0x800 net/netlink/genetlink.c:1210
netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2533
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x53c/0x7f0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x8b8/0xd70 net/netlink/af_netlink.c:1882
sock_sendmsg_nosec net/socket.c:718 [inline]
__sock_sendmsg net/socket.c:733 [inline]
____sys_sendmsg+0xaaf/0xc90 net/socket.c:2573
___sys_sendmsg+0x135/0x1e0 net/socket.c:2627
__sys_sendmsg+0x16e/0x220 net/socket.c:2659
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
Close: https://syzkaller.appspot.com/bug?extid=aaf0488c83d1d5f4f029 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: uclogic: Add NULL check in uclogic_input_configured()
devm_kasprintf() returns NULL when memory allocation fails. Currently,
uclogic_input_configured() does not check for this case, which results
in a NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue. |
| SOUND4 IMPACT/FIRST/PULSE/Eco versions 2.x and below contain hardcoded credentials embedded in server binaries that cannot be modified through normal device operations. Attackers can leverage these static credentials to gain unauthorized access to the device across Linux and Windows distributions without requiring user interaction. |
| Information Exposure Vulnerability in Hitachi Ops Center API Configuration Manager, Hitachi Configuration Manager, Hitachi Device Manager allows Session Hijacking.This issue affects Hitachi Ops Center API Configuration Manager: from 10.0.0-00 before 11.0.5-00; Hitachi Configuration Manager: from 8.5.1-00 before 11.0.5-00; Hitachi Device Manager: from 8.4.1-00 before 8.6.5-00. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix gmap_helper_zap_one_page() again
A few checks were missing in gmap_helper_zap_one_page(), which can lead
to memory corruption in the guest under specific circumstances.
Add the missing checks. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Fix memory leak in get_file_all_info()
In get_file_all_info(), if vfs_getattr() fails, the function returns
immediately without freeing the allocated filename, leading to a memory
leak.
Fix this by freeing the filename before returning in this error case. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix memory and information leak in smb3_reconfigure()
In smb3_reconfigure(), if smb3_sync_session_ctx_passwords() fails, the
function returns immediately without freeing and erasing the newly
allocated new_password and new_password2. This causes both a memory leak
and a potential information leak.
Fix this by calling kfree_sensitive() on both password buffers before
returning in this error case. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: restore destructor on submit failure
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: phy: isp1301: fix non-OF device reference imbalance
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: always drop device refcount in ib_del_sub_device_and_put()
Since nldev_deldev() (introduced by commit 060c642b2ab8 ("RDMA/nldev: Add
support to add/delete a sub IB device through netlink") grabs a reference
using ib_device_get_by_index() before calling ib_del_sub_device_and_put(),
we need to drop that reference before returning -EOPNOTSUPP error. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: avoid chain re-validation if possible
Hamza Mahfooz reports cpu soft lock-ups in
nft_chain_validate():
watchdog: BUG: soft lockup - CPU#1 stuck for 27s! [iptables-nft-re:37547]
[..]
RIP: 0010:nft_chain_validate+0xcb/0x110 [nf_tables]
[..]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_immediate_validate+0x36/0x50 [nf_tables]
nft_chain_validate+0xc9/0x110 [nf_tables]
nft_table_validate+0x6b/0xb0 [nf_tables]
nf_tables_validate+0x8b/0xa0 [nf_tables]
nf_tables_commit+0x1df/0x1eb0 [nf_tables]
[..]
Currently nf_tables will traverse the entire table (chain graph), starting
from the entry points (base chains), exploring all possible paths
(chain jumps). But there are cases where we could avoid revalidation.
Consider:
1 input -> j2 -> j3
2 input -> j2 -> j3
3 input -> j1 -> j2 -> j3
Then the second rule does not need to revalidate j2, and, by extension j3,
because this was already checked during validation of the first rule.
We need to validate it only for rule 3.
This is needed because chain loop detection also ensures we do not exceed
the jump stack: Just because we know that j2 is cycle free, its last jump
might now exceed the allowed stack size. We also need to update all
reachable chains with the new largest observed call depth.
Care has to be taken to revalidate even if the chain depth won't be an
issue: chain validation also ensures that expressions are not called from
invalid base chains. For example, the masquerade expression can only be
called from NAT postrouting base chains.
Therefore we also need to keep record of the base chain context (type,
hooknum) and revalidate if the chain becomes reachable from a different
hook location. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix racy bitfield write in btrfs_clear_space_info_full()
From the memory-barriers.txt document regarding memory barrier ordering
guarantees:
(*) These guarantees do not apply to bitfields, because compilers often
generate code to modify these using non-atomic read-modify-write
sequences. Do not attempt to use bitfields to synchronize parallel
algorithms.
(*) Even in cases where bitfields are protected by locks, all fields
in a given bitfield must be protected by one lock. If two fields
in a given bitfield are protected by different locks, the compiler's
non-atomic read-modify-write sequences can cause an update to one
field to corrupt the value of an adjacent field.
btrfs_space_info has a bitfield sharing an underlying word consisting of
the fields full, chunk_alloc, and flush:
struct btrfs_space_info {
struct btrfs_fs_info * fs_info; /* 0 8 */
struct btrfs_space_info * parent; /* 8 8 */
...
int clamp; /* 172 4 */
unsigned int full:1; /* 176: 0 4 */
unsigned int chunk_alloc:1; /* 176: 1 4 */
unsigned int flush:1; /* 176: 2 4 */
...
Therefore, to be safe from parallel read-modify-writes losing a write to
one of the bitfield members protected by a lock, all writes to all the
bitfields must use the lock. They almost universally do, except for
btrfs_clear_space_info_full() which iterates over the space_infos and
writes out found->full = 0 without a lock.
Imagine that we have one thread completing a transaction in which we
finished deleting a block_group and are thus calling
btrfs_clear_space_info_full() while simultaneously the data reclaim
ticket infrastructure is running do_async_reclaim_data_space():
T1 T2
btrfs_commit_transaction
btrfs_clear_space_info_full
data_sinfo->full = 0
READ: full:0, chunk_alloc:0, flush:1
do_async_reclaim_data_space(data_sinfo)
spin_lock(&space_info->lock);
if(list_empty(tickets))
space_info->flush = 0;
READ: full: 0, chunk_alloc:0, flush:1
MOD/WRITE: full: 0, chunk_alloc:0, flush:0
spin_unlock(&space_info->lock);
return;
MOD/WRITE: full:0, chunk_alloc:0, flush:1
and now data_sinfo->flush is 1 but the reclaim worker has exited. This
breaks the invariant that flush is 0 iff there is no work queued or
running. Once this invariant is violated, future allocations that go
into __reserve_bytes() will add tickets to space_info->tickets but will
see space_info->flush is set to 1 and not queue the work. After this,
they will block forever on the resulting ticket, as it is now impossible
to kick the worker again.
I also confirmed by looking at the assembly of the affected kernel that
it is doing RMW operations. For example, to set the flush (3rd) bit to 0,
the assembly is:
andb $0xfb,0x60(%rbx)
and similarly for setting the full (1st) bit to 0:
andb $0xfe,-0x20(%rax)
So I think this is really a bug on practical systems. I have observed
a number of systems in this exact state, but am currently unable to
reproduce it.
Rather than leaving this footgun lying around for the future, take
advantage of the fact that there is room in the struct anyway, and that
it is already quite large and simply change the three bitfield members to
bools. This avoids writes to space_info->full having any effect on
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential null-ptr-deref in device_add()
I got the following null-ptr-deref report while doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G B W N 6.1.0-rc3+
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x196/0x210
bus_remove_device+0x1bd/0x240
device_add+0xd3d/0x1100
w1_add_master_device+0x476/0x490 [wire]
ds2482_probe+0x303/0x3e0 [ds2482]
This is how it happened:
w1_alloc_dev()
// The dev->driver is set to w1_master_driver.
memcpy(&dev->dev, device, sizeof(struct device));
device_add()
bus_add_device()
dpm_sysfs_add() // It fails, calls bus_remove_device.
// error path
bus_remove_device()
// The dev->driver is not null, but driver is not bound.
__device_release_driver()
klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref.
// normal path
bus_probe_device() // It's not called yet.
device_bind_driver()
If dev->driver is set, in the error path after calling bus_add_device()
in device_add(), bus_remove_device() is called, then the device will be
detached from driver. But device_bind_driver() is not called yet, so it
causes null-ptr-deref while access the 'knode_driver'. To fix this, set
dev->driver to null in the error path before calling bus_remove_device(). |
| IBM Jazz Reporting Service 7.0.2 and 7.0.3 does not invalidate session after logout which could allow an authenticated privileged user to impersonate another user on the system. |
| Commvault Web Server has an unspecified vulnerability that can be exploited by a remote, authenticated attacker. According to the Commvault advisory: "Webservers can be compromised through bad actors creating and executing webshells." Fixed in version 11.36.46, 11.32.89, 11.28.141, and 11.20.217 for Windows and Linux platforms. This vulnerability was added to the CISA Known Exploited Vulnerabilities (KEV) Catalog on 2025-04-28. |
