| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix dma-buf attachment leak in xe_gem_prime_import()
When xe_dma_buf_init_obj() fails, the attachment from
dma_buf_dynamic_attach() is not detached. Add dma_buf_detach() before
returning the error. Note: we cannot use goto out_err here because
xe_dma_buf_init_obj() already frees bo on failure, and out_err would
double-free it.
(cherry picked from commit a828eb185aac41800df8eae4b60501ccc0dbbe51) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix nvkm_device leak on aperture removal failure
When aperture_remove_conflicting_pci_devices() fails during probe, the
error path returns directly without unwinding the nvkm_device that was
just allocated by nvkm_device_pci_new(). This leaks both the device
wrapper and the pci_enable_device() reference taken inside it.
Jump to the existing fail_nvkm label so nvkm_device_del() runs and
balances both. The leak was introduced when the intermediate
nvkm_device_del() between detection and aperture removal was dropped
in favor of creating the pci device once. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "mm/hugetlbfs: update hugetlbfs to use mmap_prepare"
This reverts commit ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use
mmap_prepare") with conflict resolution to account for changes in commit
ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare").
The patch incorrectly handled hugetlb VMA lock allocation at the
mmap_prepare stage, where a failed allocation occurring after mmap_prepare
is called might result in the lock leaking.
There is no risk of a merge causing a similar issues, as
VMA_DONTEXPAND_BIT is set for hugetlb mappings.
As a first step in addressing this issue, simply revert the change so we
can rework how we do this having corrected the underlying issues.
We maintain the VMA flags changes as best we can, accounting for the fact
that we were working with a VMA descriptor previously and propagating
like-for-like changes for this.
Note that we invoke vma_set_flags() and do not call vma_start_write() as
vm_flags_set() does. This is OK as it's being done in an .mmap hook where
the VMA is not yet linked into the tree so nobody else can be accessing
it. |
| In the Linux kernel, the following vulnerability has been resolved:
8021q: delete cleared egress QoS mappings
vlan_dev_set_egress_priority() currently keeps cleared egress
priority mappings in the hash as tombstones. Repeated set/clear cycles
with distinct skb priorities therefore accumulate mapping nodes until
device teardown and leak memory.
Delete mappings when vlan_prio is cleared instead of keeping tombstones.
Now that the egress mapping lists are RCU protected, the node can be
unlinked safely and freed after a grace period. |
| OpenTelemetry-Go is the Go implementation of OpenTelemetry. Prior to version 0.0.17, `go.opentelemetry.io/otel/schema/v1.0` and `go.opentelemetry.io/otel/schema/v1.1` leaks one file descriptor on each successful `ParseFile` call. `ParseFile` opens the schema file and passes it to `Parse` without closing it; repeated parsing in a long-running process can exhaust the process file descriptor limit and cause denial of service. Exploitation depends on a consuming application exposing repeated schema parsing to an attacker-controlled path. Version 0.0.17 contains a patch for the issue. |
| UltraJSON is a fast JSON encoder and decoder written in pure C with bindings for Python 3.7+. Prior to 5.12.1, when ujson.dump() writes to a file-like object and the write operation raises an exception, the serialized JSON string object is not decremented, leaking memory. Each failed write operation leaks the full size of the serialized payload. This vulnerability is fixed in 5.12.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: qcom: q6apm-lpass-dai: Fix multiple graph opens
As prepare can be called mulitple times, this can result in multiple
graph opens for playback path.
This will result in a memory leaks, fix this by adding a check before
opening. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: fix memory leak on ulpi_register() error paths
Commit 01af542392b5 ("usb: ulpi: fix double free in
ulpi_register_interface() error path") removed kfree(ulpi) from
ulpi_register_interface() to fix a double-free when device_register()
fails.
But when ulpi_of_register() or ulpi_read_id() fail before
device_register() is called, the ulpi allocation is leaked.
Add kfree(ulpi) on both error paths to properly clean up the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: strparser: fix skb_head leak in strp_abort_strp()
When the stream parser is aborted, for example after a message assembly timeout,
it can still hold a reference to a partially assembled message in
strp->skb_head.
That skb is not released in strp_abort_strp(), which leaks the partially
assembled message and can be triggered repeatedly to exhaust memory.
Fix this by freeing strp->skb_head and resetting the parser state in the
abort path. Leave strp_stop() unchanged so final cleanup still happens in
strp_done() after the work and timer have been synchronized. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Fix memory leak of BO array in hang state
The hang state's BO array is allocated separately with kzalloc() in
vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the
missing kfree() for the BO array before freeing the hang state struct. |
| Tanium addressed a denial of service vulnerability in Tanium Server. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: always drain queued discard work in ext4_mb_release()
While reviewing recent ext4 patch[1], Sashiko raised the following
concern[2]:
> If the filesystem is initially mounted with the discard option,
> deleting files will populate sbi->s_discard_list and queue
> s_discard_work. If it is then remounted with nodiscard, the
> EXT4_MOUNT_DISCARD flag is cleared, but the pending s_discard_work is
> neither cancelled nor flushed.
[1] https://lore.kernel.org/r/20260319094545.19291-1-qiang.zhang@linux.dev/
[2] https://sashiko.dev/#/patchset/20260319094545.19291-1-qiang.zhang%40linux.dev
The concern was valid, but it had nothing to do with the patch[1].
One of the problems with Sashiko in its current (early) form is that
it will detect pre-existing issues and report it as a problem with the
patch that it is reviewing.
In practice, it would be hard to hit deliberately (unless you are a
malicious syzkaller fuzzer), since it would involve mounting the file
system with -o discard, and then deleting a large number of files,
remounting the file system with -o nodiscard, and then immediately
unmounting the file system before the queued discard work has a change
to drain on its own.
Fix it because it's a real bug, and to avoid Sashiko from raising this
concern when analyzing future patches to mballoc.c. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ll: Fix firmware leak on error path
Smatch reports:
drivers/bluetooth/hci_ll.c:587 download_firmware() warn:
'fw' from request_firmware() not released on lines: 544.
In download_firmware(), if request_firmware() succeeds but the returned
firmware content is invalid (no data or zero size), the function returns
without releasing the firmware, resulting in a resource leak.
Fix this by calling release_firmware() before returning when
request_firmware() succeeded but the firmware content is invalid. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix iloc.bh leak in ext4_fc_replay_inode() error paths
During code review, Joseph found that ext4_fc_replay_inode() calls
ext4_get_fc_inode_loc() to get the inode location, which holds a
reference to iloc.bh that must be released via brelse().
However, several error paths jump to the 'out' label without
releasing iloc.bh:
- ext4_handle_dirty_metadata() failure
- sync_dirty_buffer() failure
- ext4_mark_inode_used() failure
- ext4_iget() failure
Fix this by introducing an 'out_brelse' label placed just before
the existing 'out' label to ensure iloc.bh is always released.
Additionally, make ext4_fc_replay_inode() propagate errors
properly instead of always returning 0. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()
Fix a user triggerable leak on the system call failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: mediatek: svs: Fix memory leak in svs_enable_debug_write()
In svs_enable_debug_write(), the buf allocated by memdup_user_nul()
is leaked if kstrtoint() fails.
Fix this by using __free(kfree) to automatically free buf, eliminating
the need for explicit kfree() calls and preventing leaks.
[Angelo: Added missing cleanup.h inclusion] |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: parsers: Fix memory leak in mtd_parser_tplink_safeloader_parse()
The function mtd_parser_tplink_safeloader_parse() allocates buf via
mtd_parser_tplink_safeloader_read_table(). If the allocation for
parts[idx].name fails inside the loop, the code jumps to the err_free
label without freeing buf, leading to a memory leak.
Fix this by freeing the temporary buffer buf in the err_free label.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix memory leak on codec_info allocation failure
In wave5_vpu_open_enc() and wave5_vpu_open_dec(), a vpu instance is
allocated via kzalloc(). If the subsequent allocation for inst->codec_info
fails, the functions return -ENOMEM without freeing the previously
allocated instance, causing a memory leak.
Fix this by calling kfree() on the instance in this error path to ensure
it is properly released. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: call ksmbd_vfs_kern_path_end_removing() on some error paths
There are two places where ksmbd_vfs_kern_path_end_removing() needs to be
called in order to balance what the corresponding successful call to
ksmbd_vfs_kern_path_start_removing() has done, i.e. drop inode locks and
put the taken references. Otherwise there might be potential deadlocks
and unbalanced locks which are caught like:
BUG: workqueue leaked lock or atomic: kworker/5:21/0x00000000/7596
last function: handle_ksmbd_work
2 locks held by kworker/5:21/7596:
#0: ffff8881051ae448 (sb_writers#3){.+.+}-{0:0}, at: ksmbd_vfs_kern_path_locked+0x142/0x660
#1: ffff888130e966c0 (&type->i_mutex_dir_key#3/1){+.+.}-{4:4}, at: ksmbd_vfs_kern_path_locked+0x17d/0x660
CPU: 5 PID: 7596 Comm: kworker/5:21 Not tainted 6.1.162-00456-gc29b353f383b #138
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
Workqueue: ksmbd-io handle_ksmbd_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x5b
process_one_work.cold+0x57/0x5c
worker_thread+0x82/0x600
kthread+0x153/0x190
ret_from_fork+0x22/0x30
</TASK>
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/of: Fix reference leak in thermal_of_cm_lookup()
In thermal_of_cm_lookup(), tr_np is obtained via of_parse_phandle(), but
never released.
Use the __free(device_node) cleanup attribute to automatically release
the node and fix the leak.
[ rjw: Changelog edits ] |
