| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix resource leak in device_add()
When calling kobject_add() failed in device_add(), it will call
cleanup_glue_dir() to free resource. But in kobject_add(),
dev->kobj.parent has been set to NULL. This will cause resource leak.
The process is as follows:
device_add()
get_device_parent()
class_dir_create_and_add()
kobject_add() //kobject_get()
...
dev->kobj.parent = kobj;
...
kobject_add() //failed, but set dev->kobj.parent = NULL
...
glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto
//"Error" label
...
cleanup_glue_dir() //becaues glue_dir is NULL, not call
//kobject_put()
The preceding problem may cause insmod mac80211_hwsim.ko to failed.
sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim'
Call Trace:
<TASK>
dump_stack_lvl+0x8e/0xd1
sysfs_warn_dup.cold+0x1c/0x29
sysfs_create_dir_ns+0x224/0x280
kobject_add_internal+0x2aa/0x880
kobject_add+0x135/0x1a0
get_device_parent+0x3d7/0x590
device_add+0x2aa/0x1cb0
device_create_groups_vargs+0x1eb/0x260
device_create+0xdc/0x110
mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim]
init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim]
do_one_initcall+0x10f/0x630
do_init_module+0x19f/0x5e0
load_module+0x64b7/0x6eb0
__do_sys_finit_module+0x140/0x200
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to
register things with the same name in the same directory. |
| In the Linux kernel, the following vulnerability has been resolved:
intel_th: fix device leak on output open()
Make sure to drop the reference taken when looking up the th device
during output device open() on errors and on close().
Note that a recent commit fixed the leak in a couple of open() error
paths but not all of them, and the reference is still leaking on
successful open(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error
In commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix
URB memory leak"), the URB was re-anchored before usb_submit_urb() in
gs_usb_receive_bulk_callback() to prevent a leak of this URB during
cleanup.
However, this patch did not take into account that usb_submit_urb() could
fail. The URB remains anchored and
usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops
infinitely since the anchor list never becomes empty.
To fix the bug, unanchor the URB when an usb_submit_urb() error occurs,
also print an info message. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Enforce that teql can only be used as root qdisc
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - reject too-short AAD (assoclen<8) to match ESP/ESN spec
authencesn assumes an ESP/ESN-formatted AAD. When assoclen is shorter than
the minimum expected length, crypto_authenc_esn_decrypt() can advance past
the end of the destination scatterlist and trigger a NULL pointer dereference
in scatterwalk_map_and_copy(), leading to a kernel panic (DoS).
Add a minimum AAD length check to fail fast on invalid inputs. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: call skb_orphan() before skb_attempt_defer_free()
Standard UDP receive path does not use skb->destructor.
But skmsg layer does use it, since it calls skb_set_owner_sk_safe()
from udp_read_skb().
This then triggers this warning in skb_attempt_defer_free():
DEBUG_NET_WARN_ON_ONCE(skb->destructor);
We must call skb_orphan() to fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL pointer dereference in do_abort_log_replay()
Coverity reported a NULL pointer dereference issue (CID 1666756) in
do_abort_log_replay(). When btrfs_alloc_path() fails in
replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay()
calls do_abort_log_replay() which unconditionally dereferences
wc->subvol_path when attempting to print debug information. Fix this by
adding a NULL check before dereferencing wc->subvol_path in
do_abort_log_replay(). |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
Call Trace:
__hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72)
bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517)
ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66)
ptp_clock_unregister (drivers/ptp/ptp_clock.c:518)
bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134)
bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889)
Lines are against commit f8f9c1f4d0c7 ("Linux 6.19-rc3")
Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before
freeing HWRM resources. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: fix typo in frequency notification
The NAN notification is for 5745 MHz which corresponds to channel 149
and not 5475 which is not actually a valid channel. This could result in
a NULL pointer dereference in cfg80211_next_nan_dw_notif. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: fix NULL fb and crtc dereferences on USB disconnect
On disconnect drm_atomic_helper_disable_all() is called which
sets both the fb and crtc for a plane to NULL before invoking a commit.
This causes a kernel oops on every display disconnect.
Add guards for those dereferences. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix kvm_device leak in kvm_eiointc_destroy()
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_eiointc_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix kvm_device leak in kvm_ipi_destroy()
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_ipi_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix kvm_device leak in kvm_pch_pic_destroy()
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_pch_pic_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: frags: drop fraglist conntrack references
Jakub added a warning in nf_conntrack_cleanup_net_list() to make debugging
leaked skbs/conntrack references more obvious.
syzbot reports this as triggering, and I can also reproduce this via
ip_defrag.sh selftest:
conntrack cleanup blocked for 60s
WARNING: net/netfilter/nf_conntrack_core.c:2512
[..]
conntrack clenups gets stuck because there are skbs with still hold nf_conn
references via their frag_list.
net.core.skb_defer_max=0 makes the hang disappear.
Eric Dumazet points out that skb_release_head_state() doesn't follow the
fraglist.
ip_defrag.sh can only reproduce this problem since
commit 6471658dc66c ("udp: use skb_attempt_defer_free()"), but AFAICS this
problem could happen with TCP as well if pmtu discovery is off.
The relevant problem path for udp is:
1. netns emits fragmented packets
2. nf_defrag_v6_hook reassembles them (in output hook)
3. reassembled skb is tracked (skb owns nf_conn reference)
4. ip6_output refragments
5. refragmented packets also own nf_conn reference (ip6_fragment
calls ip6_copy_metadata())
6. on input path, nf_defrag_v6_hook skips defragmentation: the
fragments already have skb->nf_conn attached
7. skbs are reassembled via ipv6_frag_rcv()
8. skb_consume_udp -> skb_attempt_defer_free() -> skb ends up
in pcpu freelist, but still has nf_conn reference.
Possible solutions:
1 let defrag engine drop nf_conn entry, OR
2 export kick_defer_list_purge() and call it from the conntrack
netns exit callback, OR
3 add skb_has_frag_list() check to skb_attempt_defer_free()
2 & 3 also solve ip_defrag.sh hang but share same drawback:
Such reassembled skbs, queued to socket, can prevent conntrack module
removal until userspace has consumed the packet. While both tcp and udp
stack do call nf_reset_ct() before placing skb on socket queue, that
function doesn't iterate frag_list skbs.
Therefore drop nf_conn entries when they are placed in defrag queue.
Keep the nf_conn entry of the first (offset 0) skb so that reassembled
skb retains nf_conn entry for sake of TX path.
Note that fixes tag is incorrect; it points to the commit introducing the
'ip_defrag.sh reproducible problem': no need to backport this patch to
every stable kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: remove spin_lock() in rust_shrink_free_page()
When forward-porting Rust Binder to 6.18, I neglected to take commit
fb56fdf8b9a2 ("mm/list_lru: split the lock to per-cgroup scope") into
account, and apparently I did not end up running the shrinker callback
when I sanity tested the driver before submission. This leads to crashes
like the following:
============================================
WARNING: possible recursive locking detected
6.18.0-mainline-maybe-dirty #1 Tainted: G IO
--------------------------------------------
kswapd0/68 is trying to acquire lock:
ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: lock_list_lru_of_memcg+0x128/0x230
but task is already holding lock:
ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&l->lock);
lock(&l->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by kswapd0/68:
#0: ffffffff90d2e260 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0x597/0x1160
#1: ffff956000fa18b0 (&l->lock){+.+.}-{2:2}, at: rust_helper_spin_lock+0xd/0x20
#2: ffffffff90cf3680 (rcu_read_lock){....}-{1:2}, at: lock_list_lru_of_memcg+0x2d/0x230
To fix this, remove the spin_lock() call from rust_shrink_free_page(). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: correctly handle io_poll_add() return value on update
When the core of io_uring was updated to handle completions
consistently and with fixed return codes, the POLL_REMOVE opcode
with updates got slightly broken. If a POLL_ADD is pending and
then POLL_REMOVE is used to update the events of that request, if that
update causes the POLL_ADD to now trigger, then that completion is lost
and a CQE is never posted.
Additionally, ensure that if an update does cause an existing POLL_ADD
to complete, that the completion value isn't always overwritten with
-ECANCELED. For that case, whatever io_poll_add() set the value to
should just be retained. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: ensure context reset on disconnect()
After the blamed commit below, if the MPC subflow is already in TCP_CLOSE
status or has fallback to TCP at mptcp_disconnect() time,
mptcp_do_fastclose() skips setting the `send_fastclose flag` and the later
__mptcp_close_ssk() does not reset anymore the related subflow context.
Any later connection will be created with both the `request_mptcp` flag
and the msk-level fallback status off (it is unconditionally cleared at
MPTCP disconnect time), leading to a warning in subflow_data_ready():
WARNING: CPU: 26 PID: 8996 at net/mptcp/subflow.c:1519 subflow_data_ready (net/mptcp/subflow.c:1519 (discriminator 13))
Modules linked in:
CPU: 26 UID: 0 PID: 8996 Comm: syz.22.39 Not tainted 6.18.0-rc7-05427-g11fc074f6c36 #1 PREEMPT(voluntary)
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:subflow_data_ready (net/mptcp/subflow.c:1519 (discriminator 13))
Code: 90 0f 0b 90 90 e9 04 fe ff ff e8 b7 1e f5 fe 89 ee bf 07 00 00 00 e8 db 19 f5 fe 83 fd 07 0f 84 35 ff ff ff e8 9d 1e f5 fe 90 <0f> 0b 90 e9 27 ff ff ff e8 8f 1e f5 fe 4c 89 e7 48 89 de e8 14 09
RSP: 0018:ffffc9002646fb30 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88813b218000 RCX: ffffffff825c8435
RDX: ffff8881300b3580 RSI: ffffffff825c8443 RDI: 0000000000000005
RBP: 000000000000000b R08: ffffffff825c8435 R09: 000000000000000b
R10: 0000000000000005 R11: 0000000000000007 R12: ffff888131ac0000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f88330af6c0(0000) GS:ffff888a93dd2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f88330aefe8 CR3: 000000010ff59000 CR4: 0000000000350ef0
Call Trace:
<TASK>
tcp_data_ready (net/ipv4/tcp_input.c:5356)
tcp_data_queue (net/ipv4/tcp_input.c:5445)
tcp_rcv_state_process (net/ipv4/tcp_input.c:7165)
tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1955)
__release_sock (include/net/sock.h:1158 (discriminator 6) net/core/sock.c:3180 (discriminator 6))
release_sock (net/core/sock.c:3737)
mptcp_sendmsg (net/mptcp/protocol.c:1763 net/mptcp/protocol.c:1857)
inet_sendmsg (net/ipv4/af_inet.c:853 (discriminator 7))
__sys_sendto (net/socket.c:727 (discriminator 15) net/socket.c:742 (discriminator 15) net/socket.c:2244 (discriminator 15))
__x64_sys_sendto (net/socket.c:2247)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1))
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
RIP: 0033:0x7f883326702d
Address the issue setting an explicit `fastclosing` flag at fastclose
time, and checking such flag after mptcp_do_fastclose(). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: exynos-clkout: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
cpuset: fix warning when disabling remote partition
A warning was triggered as follows:
WARNING: kernel/cgroup/cpuset.c:1651 at remote_partition_disable+0xf7/0x110
RIP: 0010:remote_partition_disable+0xf7/0x110
RSP: 0018:ffffc90001947d88 EFLAGS: 00000206
RAX: 0000000000007fff RBX: ffff888103b6e000 RCX: 0000000000006f40
RDX: 0000000000006f00 RSI: ffffc90001947da8 RDI: ffff888103b6e000
RBP: ffff888103b6e000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88810b2e2728 R12: ffffc90001947da8
R13: 0000000000000000 R14: ffffc90001947da8 R15: ffff8881081f1c00
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f55c8bbe0b2 CR3: 000000010b14c000 CR4: 00000000000006f0
Call Trace:
<TASK>
update_prstate+0x2d3/0x580
cpuset_partition_write+0x94/0xf0
kernfs_fop_write_iter+0x147/0x200
vfs_write+0x35d/0x500
ksys_write+0x66/0xe0
do_syscall_64+0x6b/0x390
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f55c8cd4887
Reproduction steps (on a 16-CPU machine):
# cd /sys/fs/cgroup/
# mkdir A1
# echo +cpuset > A1/cgroup.subtree_control
# echo "0-14" > A1/cpuset.cpus.exclusive
# mkdir A1/A2
# echo "0-14" > A1/A2/cpuset.cpus.exclusive
# echo "root" > A1/A2/cpuset.cpus.partition
# echo 0 > /sys/devices/system/cpu/cpu15/online
# echo member > A1/A2/cpuset.cpus.partition
When CPU 15 is offlined, subpartitions_cpus gets cleared because no CPUs
remain available for the top_cpuset, forcing partitions to share CPUs with
the top_cpuset. In this scenario, disabling the remote partition triggers
a warning stating that effective_xcpus is not a subset of
subpartitions_cpus. Partitions should be invalidated in this case to
inform users that the partition is now invalid(cpus are shared with
top_cpuset).
To fix this issue:
1. Only emit the warning only if subpartitions_cpus is not empty and the
effective_xcpus is not a subset of subpartitions_cpus.
2. During the CPU hotplug process, invalidate partitions if
subpartitions_cpus is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tilcdc: Fix removal actions in case of failed probe
The drm_kms_helper_poll_fini() and drm_atomic_helper_shutdown() helpers
should only be called when the device has been successfully registered.
Currently, these functions are called unconditionally in tilcdc_fini(),
which causes warnings during probe deferral scenarios.
[ 7.972317] WARNING: CPU: 0 PID: 23 at drivers/gpu/drm/drm_atomic_state_helper.c:175 drm_atomic_helper_crtc_duplicate_state+0x60/0x68
...
[ 8.005820] drm_atomic_helper_crtc_duplicate_state from drm_atomic_get_crtc_state+0x68/0x108
[ 8.005858] drm_atomic_get_crtc_state from drm_atomic_helper_disable_all+0x90/0x1c8
[ 8.005885] drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x90/0x144
[ 8.005911] drm_atomic_helper_shutdown from tilcdc_fini+0x68/0xf8 [tilcdc]
[ 8.005957] tilcdc_fini [tilcdc] from tilcdc_pdev_probe+0xb0/0x6d4 [tilcdc]
Fix this by rewriting the failed probe cleanup path using the standard
goto error handling pattern, which ensures that cleanup functions are
only called on successfully initialized resources. Additionally, remove
the now-unnecessary is_registered flag. |
