| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| merbanan/rtl_433 versions up to and including 25.02 and prior to commit 25e47f8 contain a stack-based buffer overflow vulnerability in the function parse_rfraw() located in src/rfraw.c. When processing crafted or excessively large raw RF input data, the application may write beyond the bounds of a stack buffer, resulting in memory corruption or a crash. This vulnerability can be exploited to cause a denial of service and, under certain conditions, may be leveraged for further exploitation depending on the execution environment and available mitigations. |
| Apollo Federation is an architecture for declaratively composing APIs into a unified graph. Prior to 2.9.6, 2.10.5, 2.11.6, 2.12.3, and 2.13.2, a vulnerability exists in query plan execution within the gateway that may allow pollution of Object.prototype in certain scenarios. A malicious client may be able to pollute Object.prototype in gateway directly by crafting operations with field aliases and/or variable names that target prototype-inheritable properties. Alternatively, if a subgraph were to be compromised by a malicious actor, they may be able to pollute Object.prototype in gateway by crafting JSON response payloads that target prototype-inheritable properties. This vulnerability is fixed in 2.9.6, 2.10.5, 2.11.6, 2.12.3, and 2.13.2. |
| ImpactA server can reply with a WebSocket frame using the 64-bit length form and an extremely large length. undici's ByteParser overflows internal math, ends up in an invalid state, and throws a fatal TypeError that terminates the process.
Patches
Patched in the undici version v7.24.0 and v6.24.0. Users should upgrade to this version or later. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix potential array out of bounds access
Account for IWL_SEC_WEP_KEY_OFFSET when needed while verifying
key_len size in iwl_mvm_sec_key_add(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
nl80211_parse_mbssid_elems() uses a u8 variable num_elems to count the
number of MBSSID elements in the nested netlink attribute attrs, which can
lead to an integer overflow if a user of the nl80211 interface specifies
256 or more elements in the corresponding attribute in userspace. The
integer overflow can lead to a heap buffer overflow as num_elems determines
the size of the trailing array in elems, and this array is thereafter
written to for each element in attrs.
Note that this vulnerability only affects devices with the
wiphy->mbssid_max_interfaces member set for the wireless physical device
struct in the device driver, and can only be triggered by a process with
CAP_NET_ADMIN capabilities.
Fix this by checking for a maximum of 255 elements in attrs. |
| Delta Electronics CNCSoft-G2 lacks proper validation of the user-supplied file. If a user opens a malicious file, an attacker can leverage this vulnerability to execute code in the context of the current process. |
| A flaw was found in Red Hat AMQ Broker Operator, where it displayed a password defined in ActiveMQArtemisAddress CR, shown in plain text in the Operator Log. This flaw allows an authenticated local attacker to access information outside of their permissions. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix early read unlock of page with EOF in middle
The read result collection for buffered reads seems to run ahead of the
completion of subrequests under some circumstances, as can be seen in the
following log snippet:
9p_client_res: client 18446612686390831168 response P9_TREAD tag 0 err 0
...
netfs_sreq: R=00001b55[1] DOWN TERM f=192 s=0 5fb2/5fb2 s=5 e=0
...
netfs_collect_folio: R=00001b55 ix=00004 r=4000-5000 t=4000/5fb2
netfs_folio: i=157f3 ix=00004-00004 read-done
netfs_folio: i=157f3 ix=00004-00004 read-unlock
netfs_collect_folio: R=00001b55 ix=00005 r=5000-5fb2 t=5000/5fb2
netfs_folio: i=157f3 ix=00005-00005 read-done
netfs_folio: i=157f3 ix=00005-00005 read-unlock
...
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=c
netfs_collect_stream: R=00001b55[0:] cto=5fb2 frn=ffffffff
netfs_collect_state: R=00001b55 col=5fb2 cln=6000 n=8
...
netfs_sreq: R=00001b55[2] ZERO SUBMT f=000 s=5fb2 0/4e s=0 e=0
netfs_sreq: R=00001b55[2] ZERO TERM f=102 s=5fb2 4e/4e s=5 e=0
The 'cto=5fb2' indicates the collected file pos we've collected results to
so far - but we still have 0x4e more bytes to go - so we shouldn't have
collected folio ix=00005 yet. The 'ZERO' subreq that clears the tail
happens after we unlock the folio, allowing the application to see the
uncleared tail through mmap.
The problem is that netfs_read_unlock_folios() will unlock a folio in which
the amount of read results collected hits EOF position - but the ZERO
subreq lies beyond that and so happens after.
Fix this by changing the end check to always be the end of the folio and
never the end of the file.
In the future, I should look at clearing to the end of the folio here rather
than adding a ZERO subreq to do this. On the other hand, the ZERO subreq can
run in parallel with an async READ subreq. Further, the ZERO subreq may still
be necessary to, say, handle extents in a ceph file that don't have any
backing store and are thus implicitly all zeros.
This can be reproduced by creating a file, the size of which doesn't align
to a page boundary, e.g. 24998 (0x5fb2) bytes and then doing something
like:
xfs_io -c "mmap -r 0 0x6000" -c "madvise -d 0 0x6000" \
-c "mread -v 0 0x6000" /xfstest.test/x
The last 0x4e bytes should all be 00, but if the tail hasn't been cleared
yet, you may see rubbish there. This can be reproduced with kafs by
modifying the kernel to disable the call to netfs_read_subreq_progress()
and to stop afs_issue_read() from doing the async call for NETFS_READAHEAD.
Reproduction can be made easier by inserting an mdelay(100) in
netfs_issue_read() for the ZERO-subreq case.
AFS and CIFS are normally unlikely to show this as they dispatch READ ops
asynchronously, which allows the ZERO-subreq to finish first. 9P's READ op is
completely synchronous, so the ZERO-subreq will always happen after. It isn't
seen all the time, though, because the collection may be done in a worker
thread. |
| libcurl would wrongly close the same eventfd file descriptor twice when taking
down a connection channel after having completed a threaded name resolve. |
| The html_context_handle_element function in gst/subparse/samiparse.c in gst-plugins-base in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds write) via a crafted SMI file, as demonstrated by OneNote_Manager.smi. |
| The gst_avi_demux_parse_ncdt function in gst/avi/gstavidemux.c in gst-plugins-good in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (invalid memory read and crash) via a ncdt sub-tag that "goes behind" the surrounding tag. |
| GStreamer before 1.16.0 has a heap-based buffer overflow in the RTSP connection parser via a crafted response from a server, potentially allowing remote code execution. |
| The gst_aac_parse_sink_setcaps function in gst/audioparsers/gstaacparse.c in gst-plugins-good in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (invalid memory read and crash) via a crafted audio file. |
| In GStreamer through 1.26.1, the isomp4 plugin's qtdemux_parse_tree function may read past the end of a heap buffer while parsing an MP4 file, leading to information disclosure. |
| The gst_date_time_new_from_iso8601_string function in gst/gstdatetime.c in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds heap read) via a malformed datetime string. |
| The qtdemux_parse_samples function in gst/isomp4/qtdemux.c in gst-plugins-good in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (out-of-bounds heap read) via vectors involving the current stts index. |
| The gst_asf_demux_process_ext_stream_props function in gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer before 1.10.3 allows remote attackers to cause a denial of service (invalid memory read and crash) via vectors related to the number of languages in a video file. |
| GStreamer is a library for constructing graphs of media-handling components. A null pointer dereference has been discovered in the id3v2_read_synch_uint function, located in id3v2.c. If id3v2_read_synch_uint is called with a null work->hdr.frame_data, the pointer guint8 *data is accessed without validation, resulting in a null pointer dereference. This vulnerability can result in a Denial of Service (DoS) by triggering a segmentation fault (SEGV). This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read has been detected in the function qtdemux_parse_samples within qtdemux.c. This issue arises when the function qtdemux_parse_samples reads data beyond the boundaries of the stream->stco buffer. The following code snippet shows the call to qt_atom_parser_get_offset_unchecked, which leads to the OOB-read when parsing the provided GHSL-2024-245_crash1.mp4 file. This issue may lead to read up to 8 bytes out-of-bounds. This vulnerability is fixed in 1.24.10. |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-read vulnerability has been discovered in the qtdemux_merge_sample_table function within qtdemux.c. The problem is that the size of the stts buffer isn’t properly checked before reading stts_duration, allowing the program to read 4 bytes beyond the boundaries of stts->data. This vulnerability reads up to 4 bytes past the allocated bounds of the stts array. This vulnerability is fixed in 1.24.10. |
