| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Remote Desktop Client Remote Code Execution Vulnerability |
| Microsoft Word Remote Code Execution Vulnerability |
| Microsoft Office Remote Code Execution Vulnerability |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Versions 1.7.14 through 1.7.17 are vulnerable to a nil-pointer panic triggered by a protobuf Transaction whose embedded RawData sub-message is omitted. This omission causes RawData to decode to nil. Every transaction gossiped on the Klever-Go P2P network is decoded and validated synchronously inside the libp2p pubsub topic-validator callback, where txVersionChecker.CheckTxVersion dereferences tx.RawData.Version with no nil check. Because the libp2p pubsub callback, the underlying go-libp2p-pubsub validation worker, and Klever's own network/p2p layer install no recover(), the panic propagates and crashes the entire node process. The attacker payload is a 3-byte protobuf message; no validator key, stake, funds, or on-chain account is required, and delivery aimed at enough of the BLS validator set can halt block production, resulting in a chain halt. This issue has been fixed in version 1.7.18. |
| A stored cross-site scripting (XSS) vulnerability in lobehub/lobe-chat through v2.2.13 allows a low-privileged authenticated user to inject arbitrary JavaScript into the application by uploading a crafted SVG file as a user avatar. |
| A vulnerability has been found in code-projects Task Management System 1.0. Affected by this issue is some unknown functionality of the file /user/comment_count_user.php. The manipulation of the argument task_id leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. In versions 1.7.14 through 1.7.17, the direct-message ingress handler spawns a new goroutine for every incoming direct message before the processor-level antiflood layer makes any admission decision, with no semaphore, throttler, or bound on the number of concurrent in-flight spawns. Because the antiflood check runs inside the spawned goroutine rather than before it, a single connected peer can open a direct-send stream and send a stream of well-formed messages to force unbounded goroutine creation, where each goroutine allocates its own stack and holds a message reference until processing completes, adding scheduler and garbage-collection pressure faster than the runtime can drain it. This lets one peer degrade the node's availability and its ability to process legitimate traffic, resulting in a remotely triggerable denial of service. The issue is fixed in 1.7.18. |
| A missing authentication vulnerability in frangoteam/FUXA through 1.3.3 allows an unauthenticated remote attacker to query all historical sensor data via the DAQ_QUERY Socket.IO event. When secureEnabled=true, all other sensitive Socket.IO events (DEVICE_BROWSE, HOST_INTERFACES, DEVICE_TAGS_REQUEST, etc.) call isSocketAdminAuthorized to verify the connection token, but the DAQ_QUERY handler in server/runtime/index.js lacks this check entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix irq-disabled in local_bh_enable()
The rxrpc_assess_MTU_size() function calls down into the IP layer to find
out the MTU size for a route. When accepting an incoming call, this is
called from rxrpc_new_incoming_call() which holds interrupts disabled
across the code that calls down to it. Unfortunately, the IP layer uses
local_bh_enable() which, config dependent, throws a warning if IRQs are
enabled:
WARNING: CPU: 1 PID: 5544 at kernel/softirq.c:387 __local_bh_enable_ip+0x43/0xd0
...
RIP: 0010:__local_bh_enable_ip+0x43/0xd0
...
Call Trace:
<TASK>
rt_cache_route+0x7e/0xa0
rt_set_nexthop.isra.0+0x3b3/0x3f0
__mkroute_output+0x43a/0x460
ip_route_output_key_hash+0xf7/0x140
ip_route_output_flow+0x1b/0x90
rxrpc_assess_MTU_size.isra.0+0x2a0/0x590
rxrpc_new_incoming_peer+0x46/0x120
rxrpc_alloc_incoming_call+0x1b1/0x400
rxrpc_new_incoming_call+0x1da/0x5e0
rxrpc_input_packet+0x827/0x900
rxrpc_io_thread+0x403/0xb60
kthread+0x2f7/0x310
ret_from_fork+0x2a/0x230
ret_from_fork_asm+0x1a/0x30
...
hardirqs last enabled at (23): _raw_spin_unlock_irq+0x24/0x50
hardirqs last disabled at (24): _raw_read_lock_irq+0x17/0x70
softirqs last enabled at (0): copy_process+0xc61/0x2730
softirqs last disabled at (25): rt_add_uncached_list+0x3c/0x90
Fix this by moving the call to rxrpc_assess_MTU_size() out of
rxrpc_init_peer() and further up the stack where it can be done without
interrupts disabled.
It shouldn't be a problem for rxrpc_new_incoming_call() to do it after the
locks are dropped as pmtud is going to be performed by the I/O thread - and
we're in the I/O thread at this point. |
| Cotonti CMS's Comments plugin deserializes user-supplied data without restricting the classes that may be instantiated. In plugins/comments/controllers/actions/CreateAction.php, a POST parameter obtained via (trim-only sanitization) is passed to with no restriction, reachable by any member with write access to comments (the default setting in plugins/comments/comments.setup.php). |
| Subrion CMS's admin grid sorting helper, _gridGetSorting in includes/classes/ia.base.controller.admin.php, whitelists the (ASC/DESC) request parameter via in_array, but falls back to the raw, attacker-supplied GET parameter whenever the requested key is not present in the per-controller whitelist array: , which is then placed into %s with only backtick-quoting and no escaping. |
| Bolt CMS renders content field values through Twig's full application-level Environment with no SandboxExtension registered anywhere in the codebase. In src/Entity/Field.php, getTwigValue calls shouldBeRenderedAsTwig, which gates rendering only on the field definition's allow_twig flag and a regex checking for , , or ; when true, the raw field value is compiled and rendered via with no sandboxing. |
| Koha's guided report builder (reports/guided_reports.pl) reads the CGI parameter and, for each value, a dynamically-named parameter, and concatenates both directly into an SQL ORDER BY clause with no allowlist or validation. Since ORDER BY columns cannot be bound via prepared-statement placeholders, this requires an explicit allowlist, which does not exist. |
| Uptime Kuma's Matomo analytics integration (server/analytics/matomo-analytics.js) injects the admin-configurable Matomo value as a bare, unquoted JavaScript expression inside a <script> block rendered on every public status page. A siteId value such as , once saved by an editor/admin, executes arbitrary JavaScript for every unauthenticated visitor of the public /status/<slug> page, enabling session-cookie theft and full page takeover. |
| Fledge's backup-restore upload handler, upload_backup (python/fledge/services/core/api/backup_restore.py), takes the first extracted tar member's filename (tar_file_names[0]) and builds a shell command via string formatting. Because os.system invokes a shell and no quoting (shlex.quote, list-form subprocess) is applied, an admin uploading a crafted backup archive achieves arbitrary OS command execution. |
| Hugging Face peft's LoRA-GA and CorDA initialization modules (src/peft/tuners/lora/corda.py lines ~102 and ~163, and src/peft/tuners/lora/loraga.py line ~101) call torch.load on config-specified cache/covariance files without weights_only=True, bypassing peft's own safe-loading wrapper used elsewhere in the codebase. |
| go-shiori's DownloadBookmark (internal/core/download.go) fetches a caller-supplied bookmark URL using a plain http.Client with no custom DialContext or destination-IP validation (no IsLoopback, IsPrivate, IsUnspecified, or IsLinkLocalUnicast checks). |
| Zigbee2MQTT's ExternalJSExtension.getFilePath (lib/extension/externalJS.ts) joins a parameter received via an MQTT message (topic zigbee2mqtt/bridge/request/extension/save) into the extensions base path using path.join(basePath, name) with no sanitization. The extension handler only validates that the name ends in .js/.mjs/.cjs, writes the file, and then dynamically imports it via Node.js import, achieving remote code execution. |
| Magistrala (formerly Mainflux)'s message-readers API reads a value from the HTTP query string (readers/api/http/transport.go) with no validation and interpolates it directly into raw SQL queries via fmt.Sprintf in both the PostgreSQL reader (readers/postgres/messages.go: ) and the TimescaleDB reader (readers/timescale/messages.go, same pattern), enabling SQL injection by any authenticated user able to query channel messages. |
| OpenBK7231T's CHANNEL_SetLabel (src/cmnds/cmd_channels.c) stores channel labels received via the MQTT SetChannelLabel command using strdup with no HTML sanitization. CHANNEL_GetLabel returns these labels unsanitized, and they are rendered via hprintf255 at 15+ locations in src/httpserver/http_fns.c with no HTML encoding. |
