| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: require at least 16 bytes of TX metadata
AF_XDP accepts a TX metadata length as small as eight bytes, but every
supported request needs the flags plus at least one eight-byte request
field. Such short metadata also lets the kernel read beyond the registered
area.
Require 16 bytes rather than sizeof(struct xsk_tx_metadata) to preserve
compatibility with applications that do not use launch-time metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix locally exploitable BUG_ON in amdxdna_insert_pages()
In amdxdna_insert_pages(), vm_flags_mod() sets VM_MIXEDMAP and clears
VM_PFNMAP. If an unprivileged userspace process mmaps a non-imported GEM
object and then calls madvise(MADV_DONTNEED), the PTEs will be
successfully cleared because VM_MIXEDMAP allows this (unlike VM_PFNMAP).
When userspace subsequently accesses the memory, drm_gem_shmem_fault()
handles the page fault and attempts to map the backing shmem page via
vmf_insert_pfn() which calls vmf_insert_pfn_prot(). Because the backing
shmem page is normal system memory (pfn_valid(pfn) is true) and the VMA
now has VM_MIXEDMAP set, won't this predictably trigger the explicit
assertion BUG_ON((vma->vm_flags & VM_MIXEDMAP) && pfn_valid(pfn))
Fix by removing the vm_flags_mod() call and replacing the vm_insert_pages()
pre-population with the handle_mm_fault() loop that was already used for
the import (dma-buf) path. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amxdna: Fix page-insertion errors in amdxdna_insert_pages()
Two error paths in amdxdna_insert_pages() called vma->vm_ops->close(vma)
before returning an error code to the caller. This is incorrect:
amdxdna_gem_obj_mmap() registers an HMM interval notifier before calling
amdxdna_insert_pages(), and on a hard error it jumps to hmm_unreg to undo
that registration. Calling vm_ops->close() manually — which drops the
shmem pages_pin_count and the GEM object reference that backs the VMA —
before the mmap syscall has even returned causes those resources to be
released while the VMA is still alive. The kernel VMA teardown will call
vm_ops->close() a second time when the process later unmaps the range,
producing a reference count underflow.
Replace both hard-error returns with a deferred-fault approach that keeps
the VMA alive and retries page insertion through the HMM range-fault path. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix memory leak in btrfs_do_encoded_write()
Local fuzzing of 6.12.94 has found the following memory leak:
Unreferenced object 0xffff888018050a80 (size 64):
comm "syz.0.17", pid 10297, jiffies 4294953601
hex dump (first 32 bytes):
00 10 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
10 0a 05 18 80 88 ff ff 10 0a 05 18 80 88 ff ff ................
backtrace (crc a8a6fc29):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
extent_changeset_alloc fs/btrfs/extent_io.h:207 [inline]
qgroup_reserve_data+0x1c5/0x7d0 fs/btrfs/qgroup.c:4305
btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355
btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746
btrfs_encoded_write fs/btrfs/file.c:1482 [inline]
btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507
btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738
btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:47 [inline]
do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Unreferenced object 0xffff888018050a00 (size 64):
comm "syz.0.17", pid 10297, jiffies 4294953601
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 ff 0f 00 00 00 00 00 00 ................
90 0a 05 18 80 88 ff ff 90 0a 05 18 80 88 ff ff ................
backtrace (crc cb5c9580):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:4152 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x168/0x2c0 mm/slub.c:4358
kmalloc_noprof include/linux/slab.h:878 [inline]
kzalloc_noprof include/linux/slab.h:1014 [inline]
ulist_prealloc+0x9c/0x110 fs/btrfs/ulist.c:114
extent_changeset_prealloc fs/btrfs/extent_io.h:217 [inline]
__set_extent_bit+0x16b/0x1a70 fs/btrfs/extent-io-tree.c:1086
set_record_extent_bits+0x50/0x90 fs/btrfs/extent-io-tree.c:1821
qgroup_reserve_data+0x274/0x7d0 fs/btrfs/qgroup.c:4312
btrfs_qgroup_reserve_data+0x2e/0xb0 fs/btrfs/qgroup.c:4355
btrfs_do_encoded_write+0x92e/0x1040 fs/btrfs/inode.c:9746
btrfs_encoded_write fs/btrfs/file.c:1482 [inline]
btrfs_do_write_iter+0x280/0x610 fs/btrfs/file.c:1507
btrfs_ioctl_encoded_write+0x3d6/0x490 fs/btrfs/ioctl.c:4738
btrfs_ioctl+0x6f9/0xc90 fs/btrfs/ioctl.c:-1
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl+0xf9/0x170 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:47 [inline]
do_syscall_64+0xbe/0x1a0 arch/x86/entry/common.c:78
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by freeing an extent changeset before returning from
btrfs_do_encoded_write(). |
| In the Linux kernel, the following vulnerability has been resolved:
enic: fix tx_hang_reset use-after-free on device removal
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Skip sub-disable teardown for never-linked sub-schedulers
A sub-scheduler enable can fail before scx_link_sched() links the sched into
the hierarchy, e.g. when the parent is already being disabled, and cleanup
still runs the full scx_sub_disable().
That is racy against root disable: drain_descendants() is the only ordering
between a sub's disable-time task walk and root disable's all-task teardown,
and an unlinked sub is invisible to it. Root's teardown can thus run between
the never-linked sub's drain and its walk, exiting every task to no
scheduler.
The walk then trips the membership WARN and re-homes the exited tasks onto
the dying hierarchy, a use-after-free.
Skip the cgroup ownership reset and the task walk if @sch was never linked,
indicated by the empty ->sibling as unlinking only happens later in the same
function. The membership WARN remains valid: a linked sub is always waited
on by an ancestor's drain. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
Locking is disabled in the regmap config as this driver uses its own
lock. This means that all calls to regmap functions (read or write) must
hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do
this, and it was therefore possible that multiple threads could cause an
incorrect register to be read/written.
A previous patch partly fixed this, but only protected the write to the
interrupt mask register, and not the read from the direction register. |
| Issue summary: OpenSSL CMP response validation passed an unexpected response
sender distinguished name directly as the format string to `ERR_raise_data()`.
Impact summary: A malicious or intercepted CMP endpoint can crash a CMP client
that enforces an expected sender or uses a pinned server certificate whose
subject becomes the default expected sender.
CWE: CWE-134 (Use of Externally-Controlled Format String)
Description: When validating a received CMP message, ossl_cmp_msg_check_update()
converts the peer-supplied sender distinguished name with X509_NAME_oneline()
and passes it directly as the format argument to ERR_raise_data(). Percent
characters survive the conversion, so a sender DN such as "CN=%s%n" reaches
BIO_vsnprintf() as an attacker-controlled format string with no matching variadic
arguments. This path is only reached when the caller configures an expected
sender or pins a server certificate, which is the normal configuration for a
CMP client validating server responses.
Since the attacker controls the format string but none of the variadic
arguments, such specifiers as %s and %n dereference or write through unrelated
stack contents and crash the client. The reliable consequence is a denial of
service, when the response comes from a malicious or intercepted CMP endpoint.
There is no controlled memory write, arbitrary-address read, or reliable path
to remote code execution.
FIPS impact: no
No FIPS modules are affected by this issue, as the CMP protocol
implementation is outside the OpenSSL FIPS module boundary. |
| Issue summary: ChaCha20-Poly1305 and AES-OCB decryption with an empty
ciphertext can report success without verifying the supplied authentication
tag when the operation is finalized by calling the EVP_Cipher() function.
Impact summary: Applications calling EVP_Cipher() on an empty ciphertext and
expecting the call to check the AEAD tag may accept forged messages.
CWE: CWE-354 (Improper Validation of Integrity Check Value)
Description: The EVP_Cipher() API call for AEAD ciphers behaves like a one
shot encryption and decryption call. It also verifies the AEAD tag after the
decryption operation. However for AES-OCB and ChaCha20-Poly1305 ciphers
it skipped the AEAD tag verification when an empty ciphertext was passed to
the function. The callers of this function might believe that a successful
return indicates a valid AEAD tag for these ciphers, even when that has not
truly been validated in this case.
FIPS impact: no
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this CVE
as the affected algorithms are not FIPS approved and thus not implemented
in the FIPS module. |
| A flaw was found in open-iscsi's iscsiuio component. This vulnerability involves an integer underflow and out-of-bounds read during Dynamic Host Configuration Protocol for IPv6 (DHCPv6) packet parsing. Specifically, crafted DHCPv6 Advertise traffic with a short User Datagram Protocol (UDP) length can cause the DHCPv6 payload length to underflow. An unauthenticated attacker on an adjacent network segment can exploit this by sending specially crafted IPv6 UDP traffic while the client is in an active DHCPv6 exchange, leading to a denial of service due to a process crash or service disruption. |
| The Versa Concerto SD-WAN orchestration platform is vulnerable to an privileges escalation and container escape vulnerability caused by unsafe default mounting of host binary paths that allow the container to modify host paths. The escape can be used to trigger remote code execution or direct host access depending on the host operating system configuration.This issue is known to affect Concerto from 12.1.2 through 12.2.0. Additional versions may be vulnerable. |
| PraisonAI is a multi-agent teams system. Prior to praisonaiagents 1.6.58, spider_tools._host_is_blocked() does not resolve ordinary hostnames before scrape_page fetches them. A hostname such as 127.0.0.1.nip.io passes validation and resolves to loopback, permitting internal HTTP access. The fix uses socket.getaddrinfo and fails closed on DNS errors. This issue is fixed in version 1.6.58. |
| The Versa Concerto SD-WAN orchestration platform is vulnerable to an authentication bypass in the Traefik reverse proxy configuration, allowing at attacker to access administrative endpoints. The Spack upload endpoint can be leveraged for a Time-of-Check to Time-of-Use (TOCTOU) write in combination with a race condition to achieve remote code execution via path loading manipulation, allowing an unauthenticated actor to achieve remote code execution (RCE).This issue is known to affect Concerto from 12.1.2 through 12.2.0. Additional versions may be vulnerable. |
| A flaw was found in FreeIPA. The trust-fetch-domains command is gated by a read-only permission on the trust object rather than a trust-administration permission, allowing an authenticated, non-privileged IPA user to trigger a privileged Active Directory trust refresh using an attacker-supplied server and credentials, resulting in unauthorized, attacker-controlled modification of trusted-domain and ID-range identity data in the IPA LDAP directory. |
| IBM Power Systems Firmware FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the ASMI web interface. An unauthenticated attacker with network access can send the FSP a malformed request, allowing arbitrary code execution, giving the attacker full control over the managed system, resulting in a confidentiality, integrity, and availability impact. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "thermal/drivers/hwmon: Cleanup coding style a bit"
Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style
a bit") that introduced a use-after-free into the error path of
thermal_add_hwmon_sysfs() by removing a valid check from it. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: read le->link under the node lock in tipc_node_link_down()
tipc_node_link_down() caches the link pointer before taking n->lock:
struct tipc_link *l = le->link; /* unlocked */
if (!l)
return;
tipc_node_write_lock(n);
if (!tipc_link_is_establishing(l)) { /* deref l */
...
tipc_link_reset(l); /* write into l */
if (delete) {
kfree(l);
le->link = NULL;
The delete=true caller frees that very object under n->lock, so the lock
does not protect the cached pointer against it:
- CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link
supervision timer via tipc_node_timeout(), reads l unlocked and then
dereferences it under n->lock;
- CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable()
-> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true)
-> kfree(l).
The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers
disable_media() only schedules the asynchronous cleanup_bearer() work, so
its synchronize_net() runs after the links are already gone. An in-flight
CPU A that has read l therefore dereferences freed memory once B frees it:
a use-after-free read in tipc_link_is_establishing(), and a use-after-free
write via tipc_link_reset() on the establishing branch.
The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6:
BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285)
Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0
tipc_link_is_establishing (net/tipc/link.c:285)
tipc_node_link_down (net/tipc/node.c:1076)
tipc_node_timeout (net/tipc/node.c:843)
Allocated by task 9549:
tipc_link_create (net/tipc/link.c:490)
tipc_node_check_dest (net/tipc/node.c:1279)
tipc_disc_rcv (net/tipc/discover.c:252)
tipc_udp_recv (net/tipc/udp_media.c:389)
Freed by task 9549:
tipc_node_link_down (net/tipc/node.c:1084)
tipc_node_delete_links (net/tipc/node.c:1320)
bearer_disable (net/tipc/bearer.c:414)
__tipc_nl_bearer_disable (net/tipc/bearer.c:992)
Move the le->link read inside tipc_node_write_lock(), so it is serialised
against the kfree() in the delete path. A racing teardown now either has
not run yet, and we see a valid link, or has already run, and we see NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: don't leave a full plaintext sk_msg ring unpushed
When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills
the plaintext sk_msg ring, it does not set full_record, so the record is
left full and unpushed. A later splice() then adds to an already full
ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps
onto sg.start and the ring appears empty. Fragments added after that
overwrite live entries, and sg.size no longer matches what is reachable
between sg.start and sg.end, so pushing the record runs the scatterwalk off
the end of the scatterlist.
An unprivileged user can trigger this on a loopback TCP socket with the
"tls" ULP attached:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0
Call Trace:
skcipher_walk_next+0x1d1/0x2c0
gcm_encrypt_aesni_avx+0x1e9/0x220
bpf_exec_tx_verdict+0x3bb/0x860
tls_sw_sendmsg+0xa1a/0xca0
__sys_sendto+0x1da/0x1f0
Set full_record in the copy path when the ring becomes full, and push a
record that is already full on entry to the sendmsg loop. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: read virtqueues under worker locks
Commit bd50c5dc182b ("vsock/virtio: add support for device
suspend/resume") made the *_run flags transition from false to true when
restore installs replacement virtqueues. The RX, TX and event workers
read their virtqueue before locking and checking the corresponding flag,
so a worker delayed across freeze and restore can observe the replacement
queue's running state while retaining a pointer to the deleted queue.
Read each virtqueue under its mutex after checking the run flag, keeping
the pointer and state in the same queue generation. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: initialise dibs->lock in dibs_dev_alloc()
dibs->lock is initialised by dibs_dev_add(), but a dibs device can
already take interrupts before that call: ism_probe() runs
ism_dev_init(), and hence request_irq(), before it calls
dibs_dev_add(). No client can have registered a dmb at that point, so
no dmb interrupt can occur, but a GID event interrupt can, and
ism_handle_irq() takes dibs->lock unconditionally on entry, before it
inspects anything else.
Initialise the lock in dibs_dev_alloc() instead, so that it is valid as
soon as a driver can publish the device to its interrupt handler. |
