| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb: Fix possible NULL-deref on early runtime suspend
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: qmp-usb-legacy: Fix possible NULL-deref on early runtime suspend
There is a small window where the runtime suspend callback may run
after pm_runtime_enable() and before pm_runtime_forbid(). In this
case, a crash occurs because runtime suspend/resume dereferences
qmp->phy pointer, which is not yet initialized:
`if (!qmp->phy->init_count) {`
This can also happen if user re-enables runtime-pm via the sysfs
attribute before qmp phy is initialized.
Similarly to other qcom phy drivers, introduce a qmp->phy_initialized
variable that can be used to avoid relying on the possibly uninitialized
phy pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: free vif links after clearing wcid entries on full reset
mt7996_mac_reset_vif_iter() queues non-default vif links for kfree_rcu
while dev->wcid[] still holds pointers to the wcid embedded in each
freed link; mt76_reset_device() then dereferences those entries and
runs mt76_wcid_cleanup() on them. If a grace period elapses in between,
the cleanup operates on freed memory.
Run mt76_reset_device() first, so the wcid entries are cleaned up and
cleared while the links are still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement
The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix trampoline stack size for 128-bit arguments
btf_distill_func_proto() accepts a function argument up to 16 bytes, so a
128-bit scalar such as __int128 reaches the x86 trampoline with
arg_size == 16. But the current implementation assumes an __int128
argument only needs one register, so the register save area is
under-allocated and save_args() overwrites adjacent stack slots.
Compute the register count from arg_size for all arguments to fix it. |
| Improper authorization in Azure Database for PostgreSQL allows an authorized attacker to elevate privileges over a network. |
| Authentication bypass by spoofing in Microsoft Fabric allows an unauthorized attacker to elevate privileges over a network. |
| Insufficient verification of data authenticity in Azure Billing allows an unauthorized attacker to elevate privileges over a network. |
| Grafana OSS and Grafana Enterprise did not safely resolve symbolic links when
extracting plugin archives. A crafted plugin archive can chain relative symbolic link
entries to escape the plugin installation directory, writing arbitrary files and an
executable backend binary outside that directory. The dropped executable runs with the
privileges of the Grafana server process, resulting in remote code execution.
Plugin archives are extracted before their signature is verified, so a valid plugin
signature does not prevent the write. An operator can therefore be affected by
installing a plugin that appears legitimate, as well as by installing a plugin from an
arbitrary archive using grafana-cli, the GF_INSTALL_PLUGINS environment variable, or
preinstall configuration.
Grafana Enterprise is affected because it includes the same plugin extraction code as
Grafana OSS. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path
qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time
after releasing optrom_mutex. The repeated read is redundant and, unlike
the first, runs without optrom_mutex held, exposing flash access to
concurrent optrom operations. Drop the duplicate call. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure
for_each_child_of_node_scoped() releases the node reference on scope
exit, so the explicit of_node_put(np) in the devm_phy_create() error
path drops it twice.
Drop the redundant of_node_put() and let the scoped cleanup handle it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Resize MST HDCP per-connector arrays to 32
AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of
32 connectors. But the way it's used is like MAX_DISPLAY_COUNT.
Hence we're off by one with DRM core, which supports a max of 32
connectors.
Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT
to match its actual use, and increase the size to 32 to match the
originally intended size. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: delay the final Login Response until the session is registered
isert_put_login_tx() puts the final Login Response on the wire before
__transport_register_session(), which iscsi_post_login_handler() reaches
only after iscsi_target_do_login() returns. An initiator that issues a
SCSI command as soon as it sees that response can have it executed against
an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses
on the NULL dereference.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f]
CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: ib-comp-wq ib_cq_poll_work
RIP: 0010:target_submit+0xbe/0x390
Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c 24 78 48 b8 00
RSP: 0018:ffff8881058cfa78 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: ffff88810c78c6f0 RCX: ffffffff964bb363
RDX: 000000000000000f RSI: 00000000fffffe00 RDI: 0000000000000078
RBP: 1ffff11020b19f52 R08: 0000000000000001 R09: ffffed1020b19f52
R10: 0000000000000003 R11: ffff88810596c000 R12: 0000000000000000
R13: ffff88810c61b000 R14: ffff88810c6a3400 R15: ffff88810c61b044
FS: 0000000000000000(0000) GS:ffff8881822b2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1f1b83c000 CR3: 000000006fe72001 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
? __pfx__raw_spin_lock_bh+0x10/0x10
? __pfx_target_submit+0x10/0x10
? mutex_lock+0x81/0xe0
? __pfx_mutex_lock+0x10/0x10
? iscsit_execute_cmd+0x650/0x850
iscsit_sequence_cmd+0x186/0x3d0
iscsit_process_scsi_cmd+0x87/0x300
isert_recv_done+0x1002/0x2390
? __pfx_isert_recv_done+0x10/0x10
? rxe_poll_cq+0x253/0x3d0
? finish_task_switch.isra.0+0x1dc/0xa70
__ib_process_cq+0xe1/0x390
ib_cq_poll_work+0x46/0x150
process_one_work+0x633/0x1030
? assign_work+0x11d/0x370
worker_thread+0x45b/0xd10
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x2c6/0x3b0
? recalc_sigpending+0x15c/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x36e/0x5a0
? __pfx_ret_from_fork+0x10/0x10
? __switch_to+0x572/0xdd0
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
Delay the final Login Response instead. isert_get_rx_pdu() runs from
iscsi_target_rx_thread() after conn->rx_login_comp, completed by
iscsi_post_login_handler() after __transport_register_session(); iscsi-TCP
and cxgbit already take PDUs from that thread, isert alone does not. The
buffers are still posted first, so the initiator's first command does not
meet an empty receive queue and nothing depends on RNR flow control, and
the header and payload live in isert_conn, not in the struct iscsi_login
that iscsi_target_nego_release() frees first.
Over rxe, 400 login cycles per run, the oops appeared in 10 of 20
unpatched runs and in none of 20 runs with this patch. An
initiator that never waits is handled by the next patch.
Not tested: iWARP, discovery sessions over iSER, and real HCAs. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix devres accumulation across driver rebind
imx6_soc_volt is allocated with devm_kcalloc(cpu_dev, ...), where cpu_dev
is the CPU device from get_cpu_device(0). That device is never unbound, so
its devres list is never released, and imx6q_cpufreq_remove() does not free
the array either. Every probe therefore adds an allocation that stays for
the lifetime of the system.
Allocate against the platform device instead. Its devres is released when
the driver is unbound, which is exactly the lifetime the array wants:
imx6q_set_target() reads it, and nothing may reach that after
cpufreq_unregister_driver().
That makes the array actually go away on unbind, so also clear the
file-scope pointer in remove and on the failed-probe path, rather than
leave it pointing at memory devres is about to release.
Tested by rebinding the driver on qemu's mcimx6ul-evk. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9484/1: enable interrupts when unhandled user faults are triggered
PREEMPT_RT requires interrupts to be enabled when sending signals.
When do_DataAbort()/do_PrefetchAbort() triggers unhandled user faults,
that is `inf->fn()` return a non-zero value, and the interrupts are not
enabled within the hook function, force_sig_fault() will be called
with interrupts disabled.
This can be triggered by user programs executing the bkpt instruction,
with kernel config CONFIG_PERF_EVENTS=n.
Enable interrupts in do_DataAbort()/do_PrefetchAbort() when unhandled
user faults are triggered to fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Compare iterator types during state pruning
An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states
must not be equal, or the verifier can prune an unsafe path.
Compare the pointer type for STACK_ITER slots. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Free debugfs on registration failure
c4iw_alloc() creates the per-device debugfs tree (dev->debugfs_root via
setup_debugfs()), but it is removed only in c4iw_remove(), not in
c4iw_dealloc(). When RDMA device registration fails, the registration
worker's err_dealloc_ctx path calls c4iw_dealloc() directly, bypassing
c4iw_remove(), so the debugfs dentries leak and outlive the freed
c4iw_dev.
Move debugfs_remove_recursive() into c4iw_dealloc() so every path that
frees ctx->dev also removes its debugfs tree. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: read llcp_sock->local under the socket lock in getsockopt
nfc_llcp_getsockopt() read llcp_sock->local before lock_sock(sk) and
then dereferenced the cached pointer inside the locked region.
llcp_sock_bind() assigns and clears llcp_sock->local under the same
socket lock, dropping the last reference on its error path. A
getsockopt() racing an in-flight bind() can observe the pointer, block
on lock_sock(), and then dereference a freed nfc_llcp_local once bind()
has unwound.
Move the llcp_sock->local read and the NULL check inside the
lock_sock(sk) region so bind() cannot mutate or free the pointer between
the load and the use. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed()
Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls
nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a
partition device or write through a read-only file descriptor.
Pass flags and open_for_write through and reject disallowed commands
with -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix NULL pointer dereference in nvmet_execute_identify_ns_zns()
When a host issues an Identify command with CNS 05h (I/O Command Set
specific Identify Namespace) and CSI 02h (ZNS) targeting a file-backed
namespace, nvmet_execute_identify_ns_zns() calls bdev_is_zoned() on
req->ns->bdev. A file-backed namespace has no block device, so
req->ns->bdev is NULL and bdev_is_zoned() dereferences it, oopsing.
The I/O command set is selected by the host-supplied CSI field and the
command is routed here whenever CONFIG_BLK_DEV_ZONED is enabled,
independent of the namespace backing type, so any file-backed namespace
is exposed.
Reject the command with Invalid Field when the namespace is not backed
by a block device. |
