| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
qed: Don't collect too many protection override GRC elements
In the protection override dump path, the firmware can return far too
many GRC elements, resulting in attempting to write past the end of the
previously-kmalloc'ed dump buffer.
This will result in a kernel panic with reason:
BUG: unable to handle kernel paging request at ADDRESS
where "ADDRESS" is just past the end of the protection override dump
buffer. The start address of the buffer is:
p_hwfn->cdev->dbg_features[DBG_FEATURE_PROTECTION_OVERRIDE].dump_buf
and the size of the buffer is buf_size in the same data structure.
The panic can be arrived at from either the qede Ethernet driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc02662ed [qed]
qed_dbg_protection_override_dump at ffffffffc0267792 [qed]
qed_dbg_feature at ffffffffc026aa8f [qed]
qed_dbg_all_data at ffffffffc026b211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc027298a [qed]
devlink_health_do_dump at ffffffff82497f61
devlink_health_report at ffffffff8249cf29
qed_report_fatal_error at ffffffffc0272baf [qed]
qede_sp_task at ffffffffc045ed32 [qede]
process_one_work at ffffffff81d19783
or the qedf storage driver path:
[exception RIP: qed_grc_dump_addr_range+0x108]
qed_protection_override_dump at ffffffffc068b2ed [qed]
qed_dbg_protection_override_dump at ffffffffc068c792 [qed]
qed_dbg_feature at ffffffffc068fa8f [qed]
qed_dbg_all_data at ffffffffc0690211 [qed]
qed_fw_fatal_reporter_dump at ffffffffc069798a [qed]
devlink_health_do_dump at ffffffff8aa95e51
devlink_health_report at ffffffff8aa9ae19
qed_report_fatal_error at ffffffffc0697baf [qed]
qed_hw_err_notify at ffffffffc06d32d7 [qed]
qed_spq_post at ffffffffc06b1011 [qed]
qed_fcoe_destroy_conn at ffffffffc06b2e91 [qed]
qedf_cleanup_fcport at ffffffffc05e7597 [qedf]
qedf_rport_event_handler at ffffffffc05e7bf7 [qedf]
fc_rport_work at ffffffffc02da715 [libfc]
process_one_work at ffffffff8a319663
Resolve this by clamping the firmware's return value to the maximum
number of legal elements the firmware should return. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()
A soft lockup warning was observed on a relative small system x86-64
system with 16 GB of memory when running a debug kernel with kmemleak
enabled.
watchdog: BUG: soft lockup - CPU#8 stuck for 33s! [kworker/8:1:134]
The test system was running a workload with hot unplug happening in
parallel. Then kemleak decided to disable itself due to its inability to
allocate more kmemleak objects. The debug kernel has its
CONFIG_DEBUG_KMEMLEAK_MEM_POOL_SIZE set to 40,000.
The soft lockup happened in kmemleak_do_cleanup() when the existing
kmemleak objects were being removed and deleted one-by-one in a loop via a
workqueue. In this particular case, there are at least 40,000 objects
that need to be processed and given the slowness of a debug kernel and the
fact that a raw_spinlock has to be acquired and released in
__delete_object(), it could take a while to properly handle all these
objects.
As kmemleak has been disabled in this case, the object removal and
deletion process can be further optimized as locking isn't really needed.
However, it is probably not worth the effort to optimize for such an edge
case that should rarely happen. So the simple solution is to call
cond_resched() at periodic interval in the iteration loop to avoid soft
lockup. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: as73211: Ensure buffer holes are zeroed
Given that the buffer is copied to a kfifo that ultimately user space
can read, ensure we zero it. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: fix handling of zero-length records on the rx_list
Each recvmsg() call must process either
- only contiguous DATA records (any number of them)
- one non-DATA record
If the next record has different type than what has already been
processed we break out of the main processing loop. If the record
has already been decrypted (which may be the case for TLS 1.3 where
we don't know type until decryption) we queue the pending record
to the rx_list. Next recvmsg() will pick it up from there.
Queuing the skb to rx_list after zero-copy decrypt is not possible,
since in that case we decrypted directly to the user space buffer,
and we don't have an skb to queue (darg.skb points to the ciphertext
skb for access to metadata like length).
Only data records are allowed zero-copy, and we break the processing
loop after each non-data record. So we should never zero-copy and
then find out that the record type has changed. The corner case
we missed is when the initial record comes from rx_list, and it's
zero length. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix slab-out-of-bounds in hfs_bnode_read()
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(),
hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent
the access out of allocated memory and triggering the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()
The hfsplus_readdir() method is capable to crash by calling
hfsplus_uni2asc():
[ 667.121659][ T9805] ==================================================================
[ 667.122651][ T9805] BUG: KASAN: slab-out-of-bounds in hfsplus_uni2asc+0x902/0xa10
[ 667.123627][ T9805] Read of size 2 at addr ffff88802592f40c by task repro/9805
[ 667.124578][ T9805]
[ 667.124876][ T9805] CPU: 3 UID: 0 PID: 9805 Comm: repro Not tainted 6.16.0-rc3 #1 PREEMPT(full)
[ 667.124886][ T9805] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 667.124890][ T9805] Call Trace:
[ 667.124893][ T9805] <TASK>
[ 667.124896][ T9805] dump_stack_lvl+0x10e/0x1f0
[ 667.124911][ T9805] print_report+0xd0/0x660
[ 667.124920][ T9805] ? __virt_addr_valid+0x81/0x610
[ 667.124928][ T9805] ? __phys_addr+0xe8/0x180
[ 667.124934][ T9805] ? hfsplus_uni2asc+0x902/0xa10
[ 667.124942][ T9805] kasan_report+0xc6/0x100
[ 667.124950][ T9805] ? hfsplus_uni2asc+0x902/0xa10
[ 667.124959][ T9805] hfsplus_uni2asc+0x902/0xa10
[ 667.124966][ T9805] ? hfsplus_bnode_read+0x14b/0x360
[ 667.124974][ T9805] hfsplus_readdir+0x845/0xfc0
[ 667.124984][ T9805] ? __pfx_hfsplus_readdir+0x10/0x10
[ 667.124994][ T9805] ? stack_trace_save+0x8e/0xc0
[ 667.125008][ T9805] ? iterate_dir+0x18b/0xb20
[ 667.125015][ T9805] ? trace_lock_acquire+0x85/0xd0
[ 667.125022][ T9805] ? lock_acquire+0x30/0x80
[ 667.125029][ T9805] ? iterate_dir+0x18b/0xb20
[ 667.125037][ T9805] ? down_read_killable+0x1ed/0x4c0
[ 667.125044][ T9805] ? putname+0x154/0x1a0
[ 667.125051][ T9805] ? __pfx_down_read_killable+0x10/0x10
[ 667.125058][ T9805] ? apparmor_file_permission+0x239/0x3e0
[ 667.125069][ T9805] iterate_dir+0x296/0xb20
[ 667.125076][ T9805] __x64_sys_getdents64+0x13c/0x2c0
[ 667.125084][ T9805] ? __pfx___x64_sys_getdents64+0x10/0x10
[ 667.125091][ T9805] ? __x64_sys_openat+0x141/0x200
[ 667.125126][ T9805] ? __pfx_filldir64+0x10/0x10
[ 667.125134][ T9805] ? do_user_addr_fault+0x7fe/0x12f0
[ 667.125143][ T9805] do_syscall_64+0xc9/0x480
[ 667.125151][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 667.125158][ T9805] RIP: 0033:0x7fa8753b2fc9
[ 667.125164][ T9805] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 48
[ 667.125172][ T9805] RSP: 002b:00007ffe96f8e0f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000d9
[ 667.125181][ T9805] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa8753b2fc9
[ 667.125185][ T9805] RDX: 0000000000000400 RSI: 00002000000063c0 RDI: 0000000000000004
[ 667.125190][ T9805] RBP: 00007ffe96f8e110 R08: 00007ffe96f8e110 R09: 00007ffe96f8e110
[ 667.125195][ T9805] R10: 0000000000000000 R11: 0000000000000217 R12: 0000556b1e3b4260
[ 667.125199][ T9805] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 667.125207][ T9805] </TASK>
[ 667.125210][ T9805]
[ 667.145632][ T9805] Allocated by task 9805:
[ 667.145991][ T9805] kasan_save_stack+0x20/0x40
[ 667.146352][ T9805] kasan_save_track+0x14/0x30
[ 667.146717][ T9805] __kasan_kmalloc+0xaa/0xb0
[ 667.147065][ T9805] __kmalloc_noprof+0x205/0x550
[ 667.147448][ T9805] hfsplus_find_init+0x95/0x1f0
[ 667.147813][ T9805] hfsplus_readdir+0x220/0xfc0
[ 667.148174][ T9805] iterate_dir+0x296/0xb20
[ 667.148549][ T9805] __x64_sys_getdents64+0x13c/0x2c0
[ 667.148937][ T9805] do_syscall_64+0xc9/0x480
[ 667.149291][ T9805] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 667.149809][ T9805]
[ 667.150030][ T9805] The buggy address belongs to the object at ffff88802592f000
[ 667.150030][ T9805] which belongs to the cache kmalloc-2k of size 2048
[ 667.151282][ T9805] The buggy address is located 0 bytes to the right of
[ 667.151282][ T9805] allocated 1036-byte region [ffff88802592f000, ffff88802592f40c)
[ 667.1
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file()
When the volume header contains erroneous values that do not reflect
the actual state of the filesystem, hfsplus_fill_super() assumes that
the attributes file is not yet created, which later results in hitting
BUG_ON() when hfsplus_create_attributes_file() is called. Replace this
BUG_ON() with -EIO error with a message to suggest running fsck tool. |
| In the Linux kernel, the following vulnerability has been resolved:
drbd: add missing kref_get in handle_write_conflicts
With `two-primaries` enabled, DRBD tries to detect "concurrent" writes
and handle write conflicts, so that even if you write to the same sector
simultaneously on both nodes, they end up with the identical data once
the writes are completed.
In handling "superseeded" writes, we forgot a kref_get,
resulting in a premature drbd_destroy_device and use after free,
and further to kernel crashes with symptoms.
Relevance: No one should use DRBD as a random data generator, and apparently
all users of "two-primaries" handle concurrent writes correctly on layer up.
That is cluster file systems use some distributed lock manager,
and live migration in virtualization environments stops writes on one node
before starting writes on the other node.
Which means that other than for "test cases",
this code path is never taken in real life.
FYI, in DRBD 9, things are handled differently nowadays. We still detect
"write conflicts", but no longer try to be smart about them.
We decided to disconnect hard instead: upper layers must not submit concurrent
writes. If they do, that's their fault. |
| An integer overflow flaw was found in the Linux kernel's create_elf_tables() function. An unprivileged local user with access to SUID (or otherwise privileged) binary could use this flaw to escalate their privileges on the system. Kernel versions 2.6.x, 3.10.x and 4.14.x are believed to be vulnerable. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: Regular file corruption check
The reproducer builds a corrupted file on disk with a negative i_size value.
Add a check when opening this file to avoid subsequent operation failures. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: upper bound check of tree index in dbAllocAG
When computing the tree index in dbAllocAG, we never check if we are
out of bounds realative to the size of the stree.
This could happen in a scenario where the filesystem metadata are
corrupted. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Do not include stack ptr register in precision backtracking bookkeeping
Yi Lai reported an issue ([1]) where the following warning appears
in kernel dmesg:
[ 60.643604] verifier backtracking bug
[ 60.643635] WARNING: CPU: 10 PID: 2315 at kernel/bpf/verifier.c:4302 __mark_chain_precision+0x3a6c/0x3e10
[ 60.648428] Modules linked in: bpf_testmod(OE)
[ 60.650471] CPU: 10 UID: 0 PID: 2315 Comm: test_progs Tainted: G OE 6.15.0-rc4-gef11287f8289-dirty #327 PREEMPT(full)
[ 60.654385] Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 60.656682] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 60.660475] RIP: 0010:__mark_chain_precision+0x3a6c/0x3e10
[ 60.662814] Code: 5a 30 84 89 ea e8 c4 d9 01 00 80 3d 3e 7d d8 04 00 0f 85 60 fa ff ff c6 05 31 7d d8 04
01 48 c7 c7 00 58 30 84 e8 c4 06 a5 ff <0f> 0b e9 46 fa ff ff 48 ...
[ 60.668720] RSP: 0018:ffff888116cc7298 EFLAGS: 00010246
[ 60.671075] RAX: 54d70e82dfd31900 RBX: ffff888115b65e20 RCX: 0000000000000000
[ 60.673659] RDX: 0000000000000001 RSI: 0000000000000004 RDI: 00000000ffffffff
[ 60.676241] RBP: 0000000000000400 R08: ffff8881f6f23bd3 R09: 1ffff1103ede477a
[ 60.678787] R10: dffffc0000000000 R11: ffffed103ede477b R12: ffff888115b60ae8
[ 60.681420] R13: 1ffff11022b6cbc4 R14: 00000000fffffff2 R15: 0000000000000001
[ 60.684030] FS: 00007fc2aedd80c0(0000) GS:ffff88826fa8a000(0000) knlGS:0000000000000000
[ 60.686837] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 60.689027] CR2: 000056325369e000 CR3: 000000011088b002 CR4: 0000000000370ef0
[ 60.691623] Call Trace:
[ 60.692821] <TASK>
[ 60.693960] ? __pfx_verbose+0x10/0x10
[ 60.695656] ? __pfx_disasm_kfunc_name+0x10/0x10
[ 60.697495] check_cond_jmp_op+0x16f7/0x39b0
[ 60.699237] do_check+0x58fa/0xab10
...
Further analysis shows the warning is at line 4302 as below:
4294 /* static subprog call instruction, which
4295 * means that we are exiting current subprog,
4296 * so only r1-r5 could be still requested as
4297 * precise, r0 and r6-r10 or any stack slot in
4298 * the current frame should be zero by now
4299 */
4300 if (bt_reg_mask(bt) & ~BPF_REGMASK_ARGS) {
4301 verbose(env, "BUG regs %x\n", bt_reg_mask(bt));
4302 WARN_ONCE(1, "verifier backtracking bug");
4303 return -EFAULT;
4304 }
With the below test (also in the next patch):
__used __naked static void __bpf_jmp_r10(void)
{
asm volatile (
"r2 = 2314885393468386424 ll;"
"goto +0;"
"if r2 <= r10 goto +3;"
"if r1 >= -1835016 goto +0;"
"if r2 <= 8 goto +0;"
"if r3 <= 0 goto +0;"
"exit;"
::: __clobber_all);
}
SEC("?raw_tp")
__naked void bpf_jmp_r10(void)
{
asm volatile (
"r3 = 0 ll;"
"call __bpf_jmp_r10;"
"r0 = 0;"
"exit;"
::: __clobber_all);
}
The following is the verifier failure log:
0: (18) r3 = 0x0 ; R3_w=0
2: (85) call pc+2
caller:
R10=fp0
callee:
frame1: R1=ctx() R3_w=0 R10=fp0
5: frame1: R1=ctx() R3_w=0 R10=fp0
; asm volatile (" \ @ verifier_precision.c:184
5: (18) r2 = 0x20202000256c6c78 ; frame1: R2_w=0x20202000256c6c78
7: (05) goto pc+0
8: (bd) if r2 <= r10 goto pc+3 ; frame1: R2_w=0x20202000256c6c78 R10=fp0
9: (35) if r1 >= 0xffe3fff8 goto pc+0 ; frame1: R1=ctx()
10: (b5) if r2 <= 0x8 goto pc+0
mark_precise: frame1: last_idx 10 first_idx 0 subseq_idx -1
mark_precise: frame1: regs=r2 stack= before 9: (35) if r1 >= 0xffe3fff8 goto pc+0
mark_precise: frame1: regs=r2 stack= before 8: (bd) if r2 <= r10 goto pc+3
mark_preci
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: smartpqi: Fix smp_processor_id() call trace for preemptible kernels
Correct kernel call trace when calling smp_processor_id() when called in
preemptible kernels by using raw_smp_processor_id().
smp_processor_id() checks to see if preemption is disabled and if not,
issue an error message followed by a call to dump_stack().
Brief example of call trace:
kernel: check_preemption_disabled: 436 callbacks suppressed
kernel: BUG: using smp_processor_id() in preemptible [00000000]
code: kworker/u1025:0/2354
kernel: caller is pqi_scsi_queue_command+0x183/0x310 [smartpqi]
kernel: CPU: 129 PID: 2354 Comm: kworker/u1025:0
kernel: ...
kernel: Workqueue: writeback wb_workfn (flush-253:0)
kernel: Call Trace:
kernel: <TASK>
kernel: dump_stack_lvl+0x34/0x48
kernel: check_preemption_disabled+0xdd/0xe0
kernel: pqi_scsi_queue_command+0x183/0x310 [smartpqi]
kernel: ... |
| In the Linux kernel, the following vulnerability has been resolved:
perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()
The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses
smp_processor_id(), which assumes disabled preemption. This leads to kernel
warnings during module loading because meson_ddr_pmu_create() can be called
in a preemptible context.
Following kernel warning and stack trace:
[ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289
[ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38
[ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0
[ 31.745181] [ T2289] Tainted: [W]=WARN
[ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ 31.745188] [ T2289] Call trace:
[ 31.745191] [ T2289] show_stack+0x28/0x40 (C)
[ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198
[ 31.745205] [ T2289] dump_stack+0x20/0x50
[ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0
[ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38
[ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745246] [ T2289] platform_probe+0x98/0xe0
[ 31.745254] [ T2289] really_probe+0x144/0x3f8
[ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180
[ 31.745261] [ T2289] driver_probe_device+0x54/0x268
[ 31.745264] [ T2289] __driver_attach+0x11c/0x288
[ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160
[ 31.745274] [ T2289] driver_attach+0x34/0x50
[ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0
[ 31.745281] [ T2289] driver_register+0x78/0x120
[ 31.745285] [ T2289] __platform_driver_register+0x30/0x48
[ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745298] [ T2289] do_one_initcall+0x11c/0x438
[ 31.745303] [ T2289] do_init_module+0x68/0x228
[ 31.745311] [ T2289] load_module+0x118c/0x13a8
[ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390
[ 31.745320] [ T2289] invoke_syscall+0x74/0x108
[ 31.745326] [ T2289] el0_svc_common+0x90/0xf8
[ 31.745330] [ T2289] do_el0_svc+0x2c/0x48
[ 31.745333] [ T2289] el0_svc+0x60/0x150
[ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118
[ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0
Changes replaces smp_processor_id() with raw_smp_processor_id() to
ensure safe CPU ID retrieval in preemptible contexts. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: do not bypass hid_hw_raw_request
hid_hw_raw_request() is actually useful to ensure the provided buffer
and length are valid. Directly calling in the low level transport driver
function bypassed those checks and allowed invalid paramto be used. |
| In the Linux kernel, the following vulnerability has been resolved:
block, bfq: fix possible uaf for 'bfqq->bic'
Our test report a uaf for 'bfqq->bic' in 5.10:
==================================================================
BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30
CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014
Call Trace:
bfq_select_queue+0x378/0xa30
bfq_dispatch_request+0xe8/0x130
blk_mq_do_dispatch_sched+0x62/0xb0
__blk_mq_sched_dispatch_requests+0x215/0x2a0
blk_mq_sched_dispatch_requests+0x8f/0xd0
__blk_mq_run_hw_queue+0x98/0x180
__blk_mq_delay_run_hw_queue+0x22b/0x240
blk_mq_run_hw_queue+0xe3/0x190
blk_mq_sched_insert_requests+0x107/0x200
blk_mq_flush_plug_list+0x26e/0x3c0
blk_finish_plug+0x63/0x90
__iomap_dio_rw+0x7b5/0x910
iomap_dio_rw+0x36/0x80
ext4_dio_read_iter+0x146/0x190 [ext4]
ext4_file_read_iter+0x1e2/0x230 [ext4]
new_sync_read+0x29f/0x400
vfs_read+0x24e/0x2d0
ksys_read+0xd5/0x1b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Commit 3bc5e683c67d ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/ksm: fix flag-dropping behavior in ksm_madvise
syzkaller discovered the following crash: (kernel BUG)
[ 44.607039] ------------[ cut here ]------------
[ 44.607422] kernel BUG at mm/userfaultfd.c:2067!
[ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none)
[ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460
<snip other registers, drop unreliable trace>
[ 44.617726] Call Trace:
[ 44.617926] <TASK>
[ 44.619284] userfaultfd_release+0xef/0x1b0
[ 44.620976] __fput+0x3f9/0xb60
[ 44.621240] fput_close_sync+0x110/0x210
[ 44.622222] __x64_sys_close+0x8f/0x120
[ 44.622530] do_syscall_64+0x5b/0x2f0
[ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 44.623244] RIP: 0033:0x7f365bb3f227
Kernel panics because it detects UFFD inconsistency during
userfaultfd_release_all(). Specifically, a VMA which has a valid pointer
to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags.
The inconsistency is caused in ksm_madvise(): when user calls madvise()
with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode,
it accidentally clears all flags stored in the upper 32 bits of
vma->vm_flags.
Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and
int are 32-bit wide. This setup causes the following mishap during the &=
~VM_MERGEABLE assignment.
VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000.
After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then
promoted to unsigned long before the & operation. This promotion fills
upper 32 bits with leading 0s, as we're doing unsigned conversion (and
even for a signed conversion, this wouldn't help as the leading bit is 0).
& operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff
instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears
the upper 32-bits of its value.
Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the
BIT() macro.
Note: other VM_* flags are not affected: This only happens to the
VM_MERGEABLE flag, as the other VM_* flags are all constants of type int
and after ~ operation, they end up with leading 1 and are thus converted
to unsigned long with leading 1s.
Note 2:
After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this is
no longer a kernel BUG, but a WARNING at the same place:
[ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067
but the root-cause (flag-drop) remains the same.
[akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Cache streams targeting link when performing LT automation
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate userq input args
This will help on validating the userq input args, and
rejecting for the invalid userq request at the IOCTLs
first place. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate userq buffer virtual address and size
It needs to validate the userq object virtual address to
determine whether it is residented in a valid vm mapping. |
