| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: drop all currently held locks if deadlock happens
If vc4_hdmi_reset_link() returns -EDEADLK, it means that a deadlock
happened in the locking context. This situation should be addressed by
dropping all currently held locks and block until the contended lock
becomes available. Currently, vc4 is not dealing with the deadlock
properly, producing the following output when PROVE_LOCKING is enabled:
[ 825.612809] ------------[ cut here ]------------
[ 825.612852] WARNING: CPU: 1 PID: 116 at drivers/gpu/drm/drm_modeset_lock.c:276 drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.613458] Modules linked in: 8021q mrp garp stp llc
raspberrypi_cpufreq brcmfmac brcmutil crct10dif_ce hci_uart cfg80211
btqca btbcm bluetooth vc4 raspberrypi_hwmon snd_soc_hdmi_codec cec
clk_raspberrypi ecdh_generic drm_display_helper ecc rfkill
drm_dma_helper drm_kms_helper pwm_bcm2835 bcm2835_thermal bcm2835_rng
rng_core i2c_bcm2835 drm fuse ip_tables x_tables ipv6
[ 825.613735] CPU: 1 PID: 116 Comm: kworker/1:2 Tainted: G W 6.1.0-rc6-01399-g941aae326315 #3
[ 825.613759] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 825.613777] Workqueue: events output_poll_execute [drm_kms_helper]
[ 825.614038] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 825.614063] pc : drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.614603] lr : drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[ 825.614829] sp : ffff800008313bf0
[ 825.614844] x29: ffff800008313bf0 x28: ffffcd7778b8b000 x27: 0000000000000000
[ 825.614883] x26: 0000000000000001 x25: 0000000000000001 x24: ffff677cc35c2758
[ 825.614920] x23: ffffcd7707d01430 x22: ffffcd7707c3edc7 x21: 0000000000000001
[ 825.614958] x20: 0000000000000000 x19: ffff800008313c10 x18: 000000000000b6d3
[ 825.614995] x17: ffffcd777835e214 x16: ffffcd7777cef870 x15: fffff81000000000
[ 825.615033] x14: 0000000000000000 x13: 0000000000000099 x12: 0000000000000002
[ 825.615070] x11: 72917988020af800 x10: 72917988020af800 x9 : 72917988020af800
[ 825.615108] x8 : ffff677cc665e0a8 x7 : d00a8c180000110c x6 : ffffcd77774c0054
[ 825.615145] x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000
[ 825.615181] x2 : ffff677cc55e1880 x1 : ffffcd7777cef8ec x0 : ffff800008313c10
[ 825.615219] Call trace:
[ 825.615232] drm_modeset_drop_locks+0x60/0x68 [drm]
[ 825.615773] drm_helper_probe_detect+0x120/0x1b4 [drm_kms_helper]
[ 825.616003] output_poll_execute+0xe4/0x224 [drm_kms_helper]
[ 825.616233] process_one_work+0x2b4/0x618
[ 825.616264] worker_thread+0x24c/0x464
[ 825.616288] kthread+0xec/0x110
[ 825.616310] ret_from_fork+0x10/0x20
[ 825.616335] irq event stamp: 7634
[ 825.616349] hardirqs last enabled at (7633): [<ffffcd777831ee90>] _raw_spin_unlock_irq+0x3c/0x78
[ 825.616384] hardirqs last disabled at (7634): [<ffffcd7778315a78>] __schedule+0x134/0x9f0
[ 825.616411] softirqs last enabled at (7630): [<ffffcd7707aacea0>] local_bh_enable+0x4/0x30 [ipv6]
[ 825.617019] softirqs last disabled at (7618): [<ffffcd7707aace70>] local_bh_disable+0x4/0x30 [ipv6]
[ 825.617586] ---[ end trace 0000000000000000 ]---
Therefore, deal with the deadlock as suggested by [1], using the
function drm_modeset_backoff().
[1] https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locking |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla4xxx: Add length check when parsing nlattrs
There are three places that qla4xxx parses nlattrs:
- qla4xxx_set_chap_entry()
- qla4xxx_iface_set_param()
- qla4xxx_sysfs_ddb_set_param()
and each of them directly converts the nlattr to specific pointer of
structure without length checking. This could be dangerous as those
attributes are not validated and a malformed nlattr (e.g., length 0) could
result in an OOB read that leaks heap dirty data.
Add the nla_len check before accessing the nlattr data and return EINVAL if
the length check fails. |
| In the Linux kernel, the following vulnerability has been resolved:
FS: JFS: Fix null-ptr-deref Read in txBegin
Syzkaller reported an issue where txBegin may be called
on a superblock in a read-only mounted filesystem which leads
to NULL pointer deref. This could be solved by checking if
the filesystem is read-only before calling txBegin, and returning
with appropiate error code. |
| In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: Fix a null-ptr-deref bug in buffer_prepare() and buffer_finish()
When the driver calls cx23885_risc_buffer() to prepare the buffer, the
function call dma_alloc_coherent may fail, resulting in a empty buffer
risc->cpu. Later when we free the buffer or access the buffer, null ptr
deref is triggered.
This bug is similar to the following one:
https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71.
We believe the bug can be also dynamically triggered from user side.
Similarly, we fix this by checking the return value of cx23885_risc_buffer()
and the value of risc->cpu before buffer free. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix potential null dereference
The adev->dm.dc pointer can be NULL and dereferenced in amdgpu_dm_fini()
without checking.
Add a NULL pointer check before calling dc_dmub_srv_destroy().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
media: vsp1: Replace vb2_is_streaming() with vb2_start_streaming_called()
The vsp1 driver uses the vb2_is_streaming() function in its .buf_queue()
handler to check if the .start_streaming() operation has been called,
and decide whether to just add the buffer to an internal queue, or also
trigger a hardware run. vb2_is_streaming() relies on the vb2_queue
structure's streaming field, which used to be set only after calling the
.start_streaming() operation.
Commit a10b21532574 ("media: vb2: add (un)prepare_streaming queue ops")
changed this, setting the .streaming field in vb2_core_streamon() before
enqueuing buffers to the driver and calling .start_streaming(). This
broke the vsp1 driver which now believes that .start_streaming() has
been called when it hasn't, leading to a crash:
[ 881.058705] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
[ 881.067495] Mem abort info:
[ 881.070290] ESR = 0x0000000096000006
[ 881.074042] EC = 0x25: DABT (current EL), IL = 32 bits
[ 881.079358] SET = 0, FnV = 0
[ 881.082414] EA = 0, S1PTW = 0
[ 881.085558] FSC = 0x06: level 2 translation fault
[ 881.090439] Data abort info:
[ 881.093320] ISV = 0, ISS = 0x00000006
[ 881.097157] CM = 0, WnR = 0
[ 881.100126] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004fa51000
[ 881.106573] [0000000000000020] pgd=080000004f36e003, p4d=080000004f36e003, pud=080000004f7ec003, pmd=0000000000000000
[ 881.117217] Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
[ 881.123494] Modules linked in: rcar_fdp1 v4l2_mem2mem
[ 881.128572] CPU: 0 PID: 1271 Comm: yavta Tainted: G B 6.2.0-rc1-00023-g6c94e2e99343 #556
[ 881.138061] Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
[ 881.145981] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 881.152951] pc : vsp1_dl_list_add_body+0xa8/0xe0
[ 881.157580] lr : vsp1_dl_list_add_body+0x34/0xe0
[ 881.162206] sp : ffff80000c267710
[ 881.165522] x29: ffff80000c267710 x28: ffff000010938ae8 x27: ffff000013a8dd98
[ 881.172683] x26: ffff000010938098 x25: ffff000013a8dc00 x24: ffff000010ed6ba8
[ 881.179841] x23: ffff00000faa4000 x22: 0000000000000000 x21: 0000000000000020
[ 881.186998] x20: ffff00000faa4000 x19: 0000000000000000 x18: 0000000000000000
[ 881.194154] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 881.201309] x14: 0000000000000000 x13: 746e696174206c65 x12: ffff70000157043d
[ 881.208465] x11: 1ffff0000157043c x10: ffff70000157043c x9 : dfff800000000000
[ 881.215622] x8 : ffff80000ab821e7 x7 : 00008ffffea8fbc4 x6 : 0000000000000001
[ 881.222779] x5 : ffff80000ab821e0 x4 : ffff70000157043d x3 : 0000000000000020
[ 881.229936] x2 : 0000000000000020 x1 : ffff00000e4f6400 x0 : 0000000000000000
[ 881.237092] Call trace:
[ 881.239542] vsp1_dl_list_add_body+0xa8/0xe0
[ 881.243822] vsp1_video_pipeline_run+0x270/0x2a0
[ 881.248449] vsp1_video_buffer_queue+0x1c0/0x1d0
[ 881.253076] __enqueue_in_driver+0xbc/0x260
[ 881.257269] vb2_start_streaming+0x48/0x200
[ 881.261461] vb2_core_streamon+0x13c/0x280
[ 881.265565] vb2_streamon+0x3c/0x90
[ 881.269064] vsp1_video_streamon+0x2fc/0x3e0
[ 881.273344] v4l_streamon+0x50/0x70
[ 881.276844] __video_do_ioctl+0x2bc/0x5d0
[ 881.280861] video_usercopy+0x2a8/0xc80
[ 881.284704] video_ioctl2+0x20/0x40
[ 881.288201] v4l2_ioctl+0xa4/0xc0
[ 881.291525] __arm64_sys_ioctl+0xe8/0x110
[ 881.295543] invoke_syscall+0x68/0x190
[ 881.299303] el0_svc_common.constprop.0+0x88/0x170
[ 881.304105] do_el0_svc+0x4c/0xf0
[ 881.307430] el0_svc+0x4c/0xa0
[ 881.310494] el0t_64_sync_handler+0xbc/0x140
[ 881.314773] el0t_64_sync+0x190/0x194
[ 881.318450] Code: d50323bf d65f03c0 91008263 f9800071 (885f7c60)
[ 881.324551] ---[ end trace 0000000000000000 ]---
[ 881.329173] note: yavta[1271] exited with preempt_count 1
A different r
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
x86/platform/uv: Use alternate source for socket to node data
The UV code attempts to build a set of tables to allow it to do
bidirectional socket<=>node lookups.
But when nr_cpus is set to a smaller number than actually present, the
cpu_to_node() mapping information for unused CPUs is not available to
build_socket_tables(). This results in skipping some nodes or sockets
when creating the tables and leaving some -1's for later code to trip.
over, causing oopses.
The problem is that the socket<=>node lookups are created by doing a
loop over all CPUs, then looking up the CPU's APICID and socket. But
if a CPU is not present, there is no way to start this lookup.
Instead of looping over all CPUs, take CPUs out of the equation
entirely. Loop over all APICIDs which are mapped to a valid NUMA node.
Then just extract the socket-id from the APICID.
This avoid tripping over disabled CPUs. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mvpp2_main: fix possible OOB write in mvpp2_ethtool_get_rxnfc()
rules is allocated in ethtool_get_rxnfc and the size is determined by
rule_cnt from user space. So rule_cnt needs to be check before using
rules to avoid OOB writing or NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: xts - Handle EBUSY correctly
As it is xts only handles the special return value of EINPROGRESS,
which means that in all other cases it will free data related to the
request.
However, as the caller of xts may specify MAY_BACKLOG, we also need
to expect EBUSY and treat it in the same way. Otherwise backlogged
requests will trigger a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: do not ignore genmask when looking up chain by id
When adding a rule to a chain referring to its ID, if that chain had been
deleted on the same batch, the rule might end up referring to a deleted
chain.
This will lead to a WARNING like following:
[ 33.098431] ------------[ cut here ]------------
[ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260
[ 33.099217] Modules linked in:
[ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409
[ 33.099726] Workqueue: events nf_tables_trans_destroy_work
[ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260
[ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7
[ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202
[ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000
[ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000
[ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500
[ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10
[ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000
[ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0
[ 33.104872] PKRU: 55555554
[ 33.104999] Call Trace:
[ 33.105113] <TASK>
[ 33.105214] ? show_regs+0x72/0x90
[ 33.105371] ? __warn+0xa5/0x210
[ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.105732] ? report_bug+0x1f2/0x200
[ 33.105902] ? handle_bug+0x46/0x90
[ 33.106546] ? exc_invalid_op+0x19/0x50
[ 33.106762] ? asm_exc_invalid_op+0x1b/0x20
[ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260
[ 33.107249] ? nf_tables_chain_destroy+0x30/0x260
[ 33.107506] nf_tables_trans_destroy_work+0x669/0x680
[ 33.107782] ? mark_held_locks+0x28/0xa0
[ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10
[ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70
[ 33.108538] process_one_work+0x68c/0xb70
[ 33.108755] ? lock_acquire+0x17f/0x420
[ 33.108977] ? __pfx_process_one_work+0x10/0x10
[ 33.109218] ? do_raw_spin_lock+0x128/0x1d0
[ 33.109435] ? _raw_spin_lock_irq+0x71/0x80
[ 33.109634] worker_thread+0x2bd/0x700
[ 33.109817] ? __pfx_worker_thread+0x10/0x10
[ 33.110254] kthread+0x18b/0x1d0
[ 33.110410] ? __pfx_kthread+0x10/0x10
[ 33.110581] ret_from_fork+0x29/0x50
[ 33.110757] </TASK>
[ 33.110866] irq event stamp: 1651
[ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0
[ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0
[ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0
[ 33.112453] ---[ end trace 0000000000000000 ]---
This is due to the nft_chain_lookup_byid ignoring the genmask. After this
change, adding the new rule will fail as it will not find the chain. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: use array_index_nospec with indices that come from guest
min and dest_id are guest-controlled indices. Using array_index_nospec()
after the bounds checks clamps these values to mitigate speculative execution
side-channels. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: asus: fix UAF via HID_CLAIMED_INPUT validation
After hid_hw_start() is called hidinput_connect() will eventually be
called to set up the device with the input layer since the
HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect()
all input and output reports are processed and corresponding hid_inputs
are allocated and configured via hidinput_configure_usages(). This
process involves slot tagging report fields and configuring usages
by setting relevant bits in the capability bitmaps. However it is possible
that the capability bitmaps are not set at all leading to the subsequent
hidinput_has_been_populated() check to fail leading to the freeing of the
hid_input and the underlying input device.
This becomes problematic because a malicious HID device like a
ASUS ROG N-Key keyboard can trigger the above scenario via a
specially crafted descriptor which then leads to a user-after-free
when the name of the freed input device is written to later on after
hid_hw_start(). Below, report 93 intentionally utilises the
HID_UP_UNDEFINED Usage Page which is skipped during usage
configuration, leading to the frees.
0x05, 0x0D, // Usage Page (Digitizer)
0x09, 0x05, // Usage (Touch Pad)
0xA1, 0x01, // Collection (Application)
0x85, 0x0D, // Report ID (13)
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0xC5, // Usage (0xC5)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x04, // Report Count (4)
0xB1, 0x02, // Feature (Data,Var,Abs)
0x85, 0x5D, // Report ID (93)
0x06, 0x00, 0x00, // Usage Page (Undefined)
0x09, 0x01, // Usage (0x01)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x1B, // Report Count (27)
0x81, 0x02, // Input (Data,Var,Abs)
0xC0, // End Collection
Below is the KASAN splat after triggering the UAF:
[ 21.672709] ==================================================================
[ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80
[ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54
[ 21.673700]
[ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary)
[ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 21.673700] Call Trace:
[ 21.673700] <TASK>
[ 21.673700] dump_stack_lvl+0x5f/0x80
[ 21.673700] print_report+0xd1/0x660
[ 21.673700] kasan_report+0xe5/0x120
[ 21.673700] __asan_report_store8_noabort+0x1b/0x30
[ 21.673700] asus_probe+0xeeb/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Allocated by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_alloc_info+0x3b/0x50
[ 21.673700] __kasan_kmalloc+0x9c/0xa0
[ 21.673700] __kmalloc_cache_noprof+0x139/0x340
[ 21.673700] input_allocate_device+0x44/0x370
[ 21.673700] hidinput_connect+0xcb6/0x2630
[ 21.673700] hid_connect+0xf74/0x1d60
[ 21.673700] hid_hw_start+0x8c/0x110
[ 21.673700] asus_probe+0x5a3/0xf80
[ 21.673700] hid_device_probe+0x2ee/0x700
[ 21.673700] really_probe+0x1c6/0x6b0
[ 21.673700] __driver_probe_device+0x24f/0x310
[ 21.673700] driver_probe_device+0x4e/0x220
[...]
[ 21.673700]
[ 21.673700] Freed by task 54:
[ 21.673700] kasan_save_stack+0x3d/0x60
[ 21.673700] kasan_save_track+0x18/0x40
[ 21.673700] kasan_save_free_info+0x3f/0x60
[ 21.673700] __kasan_slab_free+0x3c/0x50
[ 21.673700] kfre
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix race with concurrent opens in rename(2)
Besides sending the rename request to the server, the rename process
also involves closing any deferred close, waiting for outstanding I/O
to complete as well as marking all existing open handles as deleted to
prevent them from deferring closes, which increases the race window
for potential concurrent opens on the target file.
Fix this by unhashing the dentry in advance to prevent any concurrent
opens on the target. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: convert 'use' field to refcount_t
The 'use' field in struct rose_neigh is used as a reference counter but
lacks atomicity. This can lead to race conditions where a rose_neigh
structure is freed while still being referenced by other code paths.
For example, when rose_neigh->use becomes zero during an ioctl operation
via rose_rt_ioctl(), the structure may be removed while its timer is
still active, potentially causing use-after-free issues.
This patch changes the type of 'use' from unsigned short to refcount_t and
updates all code paths to use rose_neigh_hold() and rose_neigh_put() which
operate reference counts atomically. |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: include node references in rose_neigh refcount
Current implementation maintains two separate reference counting
mechanisms: the 'count' field in struct rose_neigh tracks references from
rose_node structures, while the 'use' field (now refcount_t) tracks
references from rose_sock.
This patch merges these two reference counting systems using 'use' field
for proper reference management. Specifically, this patch adds incrementing
and decrementing of rose_neigh->use when rose_neigh->count is incremented
or decremented.
This patch also modifies rose_rt_free(), rose_rt_device_down() and
rose_clear_route() to properly release references to rose_neigh objects
before freeing a rose_node through rose_remove_node().
These changes ensure rose_neigh structures are properly freed only when
all references, including those from rose_node structures, are released.
As a result, this resolves a slab-use-after-free issue reported by Syzbot. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control().
syzbot reported the splat below. [0]
When atmtcp_v_open() or atmtcp_v_close() is called via connect()
or close(), atmtcp_send_control() is called to send an in-kernel
special message.
The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length.
Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc.
The notable thing is struct atmtcp_control is uAPI but has a
space for an in-kernel pointer.
struct atmtcp_control {
struct atmtcp_hdr hdr; /* must be first */
...
atm_kptr_t vcc; /* both directions */
...
} __ATM_API_ALIGN;
typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t;
The special message is processed in atmtcp_recv_control() called
from atmtcp_c_send().
atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths:
1. .ndo_start_xmit() (vcc->send() == atm_send_aal0())
2. vcc_sendmsg()
The problem is sendmsg() does not validate the message length and
userspace can abuse atmtcp_recv_control() to overwrite any kptr
by atmtcp_control.
Let's add a new ->pre_send() hook to validate messages from sendmsg().
[0]:
Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI
KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f]
CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline]
RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297
Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c
RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203
RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c
RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd
R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000
R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff
FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0
Call Trace:
<TASK>
vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645
sock_sendmsg_nosec net/socket.c:714 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:729
____sys_sendmsg+0x505/0x830 net/socket.c:2614
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668
__sys_sendmsg net/socket.c:2700 [inline]
__do_sys_sendmsg net/socket.c:2705 [inline]
__se_sys_sendmsg net/socket.c:2703 [inline]
__x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f8d7e96a4a9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9
RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005
RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f
R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac
R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250
</TASK>
Modules linked in: |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: do not propagate ENODATA disk errors into xattr code
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
}
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abdff we did not oops, but we did return the
wrong error code to userspace.) |
| In the Linux kernel, the following vulnerability has been resolved:
x86/vmscape: Add conditional IBPB mitigation
VMSCAPE is a vulnerability that exploits insufficient branch predictor
isolation between a guest and a userspace hypervisor (like QEMU). Existing
mitigations already protect kernel/KVM from a malicious guest. Userspace
can additionally be protected by flushing the branch predictors after a
VMexit.
Since it is the userspace that consumes the poisoned branch predictors,
conditionally issue an IBPB after a VMexit and before returning to
userspace. Workloads that frequently switch between hypervisor and
userspace will incur the most overhead from the new IBPB.
This new IBPB is not integrated with the existing IBPB sites. For
instance, a task can use the existing speculation control prctl() to
get an IBPB at context switch time. With this implementation, the
IBPB is doubled up: one at context switch and another before running
userspace.
The intent is to integrate and optimize these cases post-embargo.
[ dhansen: elaborate on suboptimal IBPB solution ] |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Detect events pointing to unexpected TREs
When a remote device sends a completion event to the host, it contains a
pointer to the consumed TRE. The host uses this pointer to process all of
the TREs between it and the host's local copy of the ring's read pointer.
This works when processing completion for chained transactions, but can
lead to nasty results if the device sends an event for a single-element
transaction with a read pointer that is multiple elements ahead of the
host's read pointer.
For instance, if the host accesses an event ring while the device is
updating it, the pointer inside of the event might still point to an old
TRE. If the host uses the channel's xfer_cb() to directly free the buffer
pointed to by the TRE, the buffer will be double-freed.
This behavior was observed on an ep that used upstream EP stack without
'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after buffer
is written")'. Where the device updated the events ring pointer before
updating the event contents, so it left a window where the host was able to
access the stale data the event pointed to, before the device had the
chance to update them. The usual pattern was that the host received an
event pointing to a TRE that is not immediately after the last processed
one, so it got treated as if it was a chained transaction, processing all
of the TREs in between the two read pointers.
This commit aims to harden the host by ensuring transactions where the
event points to a TRE that isn't local_rp + 1 are chained.
[mani: added stable tag and reworded commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: exynos: Fix programming of HCI_UTRL_NEXUS_TYPE
On Google gs101, the number of UTP transfer request slots (nutrs) is 32,
and in this case the driver ends up programming the UTRL_NEXUS_TYPE
incorrectly as 0.
This is because the left hand side of the shift is 1, which is of type
int, i.e. 31 bits wide. Shifting by more than that width results in
undefined behaviour.
Fix this by switching to the BIT() macro, which applies correct type
casting as required. This ensures the correct value is written to
UTRL_NEXUS_TYPE (0xffffffff on gs101), and it also fixes a UBSAN shift
warning:
UBSAN: shift-out-of-bounds in drivers/ufs/host/ufs-exynos.c:1113:21
shift exponent 32 is too large for 32-bit type 'int'
For consistency, apply the same change to the nutmrs / UTMRL_NEXUS_TYPE
write. |
